2018/08/09 - Amazon DynamoDB Accelerator (DAX) - 7 updated api methods
Changes Add the SSESpecification field to CreateCluster to allow creation of clusters with server-side encryption, and add the SSEDescription field to DescribeClusters to display the status of server-side encryption for a cluster.
{'SSESpecification': {'Enabled': 'boolean'}}
Response {'Cluster': {'SSEDescription': {'Status': 'ENABLING | ENABLED | DISABLING | '
'DISABLED'}}}
Creates a DAX cluster. All nodes in the cluster run the same DAX caching software.
See also: AWS API Documentation
Request Syntax
client.create_cluster(
ClusterName='string',
NodeType='string',
Description='string',
ReplicationFactor=123,
AvailabilityZones=[
'string',
],
SubnetGroupName='string',
SecurityGroupIds=[
'string',
],
PreferredMaintenanceWindow='string',
NotificationTopicArn='string',
IamRoleArn='string',
ParameterGroupName='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
SSESpecification={
'Enabled': True|False
}
)
string
[REQUIRED]
The cluster identifier. This parameter is stored as a lowercase string.
Constraints:
A name must contain from 1 to 20 alphanumeric characters or hyphens.
The first character must be a letter.
A name cannot end with a hyphen or contain two consecutive hyphens.
string
[REQUIRED]
The compute and memory capacity of the nodes in the cluster.
string
A description of the cluster.
integer
[REQUIRED]
The number of nodes in the DAX cluster. A replication factor of 1 will create a single-node cluster, without any read replicas. For additional fault tolerance, you can create a multiple node cluster with one or more read replicas. To do this, set ReplicationFactor to 2 or more.
Note
AWS recommends that you have at least two read replicas per cluster.
list
The Availability Zones (AZs) in which the cluster nodes will be created. All nodes belonging to the cluster are placed in these Availability Zones. Use this parameter if you want to distribute the nodes across multiple AZs.
(string) --
string
The name of the subnet group to be used for the replication group.
Warning
DAX clusters can only run in an Amazon VPC environment. All of the subnets that you specify in a subnet group must exist in the same VPC.
list
A list of security group IDs to be assigned to each node in the DAX cluster. (Each of the security group ID is system-generated.)
If this parameter is not specified, DAX assigns the default VPC security group to each node.
(string) --
string
Specifies the weekly time range during which maintenance on the DAX cluster is performed. It is specified as a range in the format ddd:hh24:mi-ddd:hh24:mi (24H Clock UTC). The minimum maintenance window is a 60 minute period. Valid values for ddd are:
sun
mon
tue
wed
thu
fri
sat
Example: sun:05:00-sun:09:00
Note
If you don't specify a preferred maintenance window when you create or modify a cache cluster, DAX assigns a 60-minute maintenance window on a randomly selected day of the week.
string
The Amazon Resource Name (ARN) of the Amazon SNS topic to which notifications will be sent.
Note
The Amazon SNS topic owner must be same as the DAX cluster owner.
string
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
string
The parameter group to be associated with the DAX cluster.
list
A set of tags to associate with the DAX cluster.
(dict) --
A description of a tag. Every tag is a key-value pair. You can add up to 50 tags to a single DAX cluster.
AWS-assigned tag names and values are automatically assigned the aws: prefix, which the user cannot assign. AWS-assigned tag names do not count towards the tag limit of 50. User-assigned tag names have the prefix user: .
You cannot backdate the application of a tag.
Key (string) --
The key for the tag. Tag keys are case sensitive. Every DAX cluster can only have one tag with the same key. If you try to add an existing tag (same key), the existing tag value will be updated to the new value.
Value (string) --
The value of the tag. Tag values are case-sensitive and can be null.
dict
Represents the settings used to enable server-side encryption on the cluster.
Enabled (boolean) -- [REQUIRED]
Indicates whether server-side encryption is enabled (true) or disabled (false) on the cluster.
dict
Response Syntax
{
'Cluster': {
'ClusterName': 'string',
'Description': 'string',
'ClusterArn': 'string',
'TotalNodes': 123,
'ActiveNodes': 123,
'NodeType': 'string',
'Status': 'string',
'ClusterDiscoveryEndpoint': {
'Address': 'string',
'Port': 123
},
'NodeIdsToRemove': [
'string',
],
'Nodes': [
{
'NodeId': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'NodeCreateTime': datetime(2015, 1, 1),
'AvailabilityZone': 'string',
'NodeStatus': 'string',
'ParameterGroupStatus': 'string'
},
],
'PreferredMaintenanceWindow': 'string',
'NotificationConfiguration': {
'TopicArn': 'string',
'TopicStatus': 'string'
},
'SubnetGroup': 'string',
'SecurityGroups': [
{
'SecurityGroupIdentifier': 'string',
'Status': 'string'
},
],
'IamRoleArn': 'string',
'ParameterGroup': {
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'NodeIdsToReboot': [
'string',
]
},
'SSEDescription': {
'Status': 'ENABLING'|'ENABLED'|'DISABLING'|'DISABLED'
}
}
}
Response Structure
(dict) --
Cluster (dict) --
A description of the DAX cluster that you have created.
ClusterName (string) --
The name of the DAX cluster.
Description (string) --
The description of the cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) that uniquely identifies the cluster.
TotalNodes (integer) --
The total number of nodes in the cluster.
ActiveNodes (integer) --
The number of nodes in the cluster that are active (i.e., capable of serving requests).
NodeType (string) --
The node type for the nodes in the cluster. (All nodes in a DAX cluster are of the same type.)
Status (string) --
The current status of the cluster.
ClusterDiscoveryEndpoint (dict) --
The configuration endpoint for this DAX cluster, consisting of a DNS name and a port number. Client applications can specify this endpoint, rather than an individual node endpoint, and allow the DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeIdsToRemove (list) --
A list of nodes to be removed from the cluster.
(string) --
Nodes (list) --
A list of nodes that are currently in the cluster.
(dict) --
Represents an individual node within a DAX cluster.
NodeId (string) --
A system-generated identifier for the node.
Endpoint (dict) --
The endpoint for the node, consisting of a DNS name and a port number. Client applications can connect directly to a node endpoint, if desired (as an alternative to allowing DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeCreateTime (datetime) --
The date and time (in UNIX epoch format) when the node was launched.
AvailabilityZone (string) --
The Availability Zone (AZ) in which the node has been deployed.
NodeStatus (string) --
The current status of the node. For example: available .
ParameterGroupStatus (string) --
The status of the parameter group associated with this node. For example, in-sync .
PreferredMaintenanceWindow (string) --
A range of time when maintenance of DAX cluster software will be performed. For example: sun:01:00-sun:09:00 . Cluster maintenance normally takes less than 30 minutes, and is performed automatically within the maintenance window.
NotificationConfiguration (dict) --
Describes a notification topic and its status. Notification topics are used for publishing DAX events to subscribers using Amazon Simple Notification Service (SNS).
TopicArn (string) --
The Amazon Resource Name (ARN) that identifies the topic.
TopicStatus (string) --
The current state of the topic.
SubnetGroup (string) --
The subnet group where the DAX cluster is running.
SecurityGroups (list) --
A list of security groups, and the status of each, for the nodes in the cluster.
(dict) --
An individual VPC security group and its status.
SecurityGroupIdentifier (string) --
The unique ID for this security group.
Status (string) --
The status of this security group.
IamRoleArn (string) --
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
ParameterGroup (dict) --
The parameter group being used by nodes in the cluster.
ParameterGroupName (string) --
The name of the parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
NodeIdsToReboot (list) --
The node IDs of one or more nodes to be rebooted.
(string) --
SSEDescription (dict) --
The description of the server-side encryption status on the specified DAX cluster.
Status (string) --
The current state of server-side encryption:
ENABLING - Server-side encryption is being enabled.
ENABLED - Server-side encryption is enabled.
DISABLING - Server-side encryption is being disabled.
DISABLED - Server-side encryption is disabled.
{'Cluster': {'SSEDescription': {'Status': 'ENABLING | ENABLED | DISABLING | '
'DISABLED'}}}
Removes one or more nodes from a DAX cluster.
Note
You cannot use DecreaseReplicationFactor to remove the last node in a DAX cluster. If you need to do this, use DeleteCluster instead.
See also: AWS API Documentation
Request Syntax
client.decrease_replication_factor(
ClusterName='string',
NewReplicationFactor=123,
AvailabilityZones=[
'string',
],
NodeIdsToRemove=[
'string',
]
)
string
[REQUIRED]
The name of the DAX cluster from which you want to remove nodes.
integer
[REQUIRED]
The new number of nodes for the DAX cluster.
list
The Availability Zone(s) from which to remove nodes.
(string) --
list
The unique identifiers of the nodes to be removed from the cluster.
(string) --
dict
Response Syntax
{
'Cluster': {
'ClusterName': 'string',
'Description': 'string',
'ClusterArn': 'string',
'TotalNodes': 123,
'ActiveNodes': 123,
'NodeType': 'string',
'Status': 'string',
'ClusterDiscoveryEndpoint': {
'Address': 'string',
'Port': 123
},
'NodeIdsToRemove': [
'string',
],
'Nodes': [
{
'NodeId': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'NodeCreateTime': datetime(2015, 1, 1),
'AvailabilityZone': 'string',
'NodeStatus': 'string',
'ParameterGroupStatus': 'string'
},
],
'PreferredMaintenanceWindow': 'string',
'NotificationConfiguration': {
'TopicArn': 'string',
'TopicStatus': 'string'
},
'SubnetGroup': 'string',
'SecurityGroups': [
{
'SecurityGroupIdentifier': 'string',
'Status': 'string'
},
],
'IamRoleArn': 'string',
'ParameterGroup': {
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'NodeIdsToReboot': [
'string',
]
},
'SSEDescription': {
'Status': 'ENABLING'|'ENABLED'|'DISABLING'|'DISABLED'
}
}
}
Response Structure
(dict) --
Cluster (dict) --
A description of the DAX cluster, after you have decreased its replication factor.
ClusterName (string) --
The name of the DAX cluster.
Description (string) --
The description of the cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) that uniquely identifies the cluster.
TotalNodes (integer) --
The total number of nodes in the cluster.
ActiveNodes (integer) --
The number of nodes in the cluster that are active (i.e., capable of serving requests).
NodeType (string) --
The node type for the nodes in the cluster. (All nodes in a DAX cluster are of the same type.)
Status (string) --
The current status of the cluster.
ClusterDiscoveryEndpoint (dict) --
The configuration endpoint for this DAX cluster, consisting of a DNS name and a port number. Client applications can specify this endpoint, rather than an individual node endpoint, and allow the DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeIdsToRemove (list) --
A list of nodes to be removed from the cluster.
(string) --
Nodes (list) --
A list of nodes that are currently in the cluster.
(dict) --
Represents an individual node within a DAX cluster.
NodeId (string) --
A system-generated identifier for the node.
Endpoint (dict) --
The endpoint for the node, consisting of a DNS name and a port number. Client applications can connect directly to a node endpoint, if desired (as an alternative to allowing DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeCreateTime (datetime) --
The date and time (in UNIX epoch format) when the node was launched.
AvailabilityZone (string) --
The Availability Zone (AZ) in which the node has been deployed.
NodeStatus (string) --
The current status of the node. For example: available .
ParameterGroupStatus (string) --
The status of the parameter group associated with this node. For example, in-sync .
PreferredMaintenanceWindow (string) --
A range of time when maintenance of DAX cluster software will be performed. For example: sun:01:00-sun:09:00 . Cluster maintenance normally takes less than 30 minutes, and is performed automatically within the maintenance window.
NotificationConfiguration (dict) --
Describes a notification topic and its status. Notification topics are used for publishing DAX events to subscribers using Amazon Simple Notification Service (SNS).
TopicArn (string) --
The Amazon Resource Name (ARN) that identifies the topic.
TopicStatus (string) --
The current state of the topic.
SubnetGroup (string) --
The subnet group where the DAX cluster is running.
SecurityGroups (list) --
A list of security groups, and the status of each, for the nodes in the cluster.
(dict) --
An individual VPC security group and its status.
SecurityGroupIdentifier (string) --
The unique ID for this security group.
Status (string) --
The status of this security group.
IamRoleArn (string) --
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
ParameterGroup (dict) --
The parameter group being used by nodes in the cluster.
ParameterGroupName (string) --
The name of the parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
NodeIdsToReboot (list) --
The node IDs of one or more nodes to be rebooted.
(string) --
SSEDescription (dict) --
The description of the server-side encryption status on the specified DAX cluster.
Status (string) --
The current state of server-side encryption:
ENABLING - Server-side encryption is being enabled.
ENABLED - Server-side encryption is enabled.
DISABLING - Server-side encryption is being disabled.
DISABLED - Server-side encryption is disabled.
{'Cluster': {'SSEDescription': {'Status': 'ENABLING | ENABLED | DISABLING | '
'DISABLED'}}}
Deletes a previously provisioned DAX cluster. DeleteCluster deletes all associated nodes, node endpoints and the DAX cluster itself. When you receive a successful response from this action, DAX immediately begins deleting the cluster; you cannot cancel or revert this action.
See also: AWS API Documentation
Request Syntax
client.delete_cluster(
ClusterName='string'
)
string
[REQUIRED]
The name of the cluster to be deleted.
dict
Response Syntax
{
'Cluster': {
'ClusterName': 'string',
'Description': 'string',
'ClusterArn': 'string',
'TotalNodes': 123,
'ActiveNodes': 123,
'NodeType': 'string',
'Status': 'string',
'ClusterDiscoveryEndpoint': {
'Address': 'string',
'Port': 123
},
'NodeIdsToRemove': [
'string',
],
'Nodes': [
{
'NodeId': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'NodeCreateTime': datetime(2015, 1, 1),
'AvailabilityZone': 'string',
'NodeStatus': 'string',
'ParameterGroupStatus': 'string'
},
],
'PreferredMaintenanceWindow': 'string',
'NotificationConfiguration': {
'TopicArn': 'string',
'TopicStatus': 'string'
},
'SubnetGroup': 'string',
'SecurityGroups': [
{
'SecurityGroupIdentifier': 'string',
'Status': 'string'
},
],
'IamRoleArn': 'string',
'ParameterGroup': {
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'NodeIdsToReboot': [
'string',
]
},
'SSEDescription': {
'Status': 'ENABLING'|'ENABLED'|'DISABLING'|'DISABLED'
}
}
}
Response Structure
(dict) --
Cluster (dict) --
A description of the DAX cluster that is being deleted.
ClusterName (string) --
The name of the DAX cluster.
Description (string) --
The description of the cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) that uniquely identifies the cluster.
TotalNodes (integer) --
The total number of nodes in the cluster.
ActiveNodes (integer) --
The number of nodes in the cluster that are active (i.e., capable of serving requests).
NodeType (string) --
The node type for the nodes in the cluster. (All nodes in a DAX cluster are of the same type.)
Status (string) --
The current status of the cluster.
ClusterDiscoveryEndpoint (dict) --
The configuration endpoint for this DAX cluster, consisting of a DNS name and a port number. Client applications can specify this endpoint, rather than an individual node endpoint, and allow the DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeIdsToRemove (list) --
A list of nodes to be removed from the cluster.
(string) --
Nodes (list) --
A list of nodes that are currently in the cluster.
(dict) --
Represents an individual node within a DAX cluster.
NodeId (string) --
A system-generated identifier for the node.
Endpoint (dict) --
The endpoint for the node, consisting of a DNS name and a port number. Client applications can connect directly to a node endpoint, if desired (as an alternative to allowing DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeCreateTime (datetime) --
The date and time (in UNIX epoch format) when the node was launched.
AvailabilityZone (string) --
The Availability Zone (AZ) in which the node has been deployed.
NodeStatus (string) --
The current status of the node. For example: available .
ParameterGroupStatus (string) --
The status of the parameter group associated with this node. For example, in-sync .
PreferredMaintenanceWindow (string) --
A range of time when maintenance of DAX cluster software will be performed. For example: sun:01:00-sun:09:00 . Cluster maintenance normally takes less than 30 minutes, and is performed automatically within the maintenance window.
NotificationConfiguration (dict) --
Describes a notification topic and its status. Notification topics are used for publishing DAX events to subscribers using Amazon Simple Notification Service (SNS).
TopicArn (string) --
The Amazon Resource Name (ARN) that identifies the topic.
TopicStatus (string) --
The current state of the topic.
SubnetGroup (string) --
The subnet group where the DAX cluster is running.
SecurityGroups (list) --
A list of security groups, and the status of each, for the nodes in the cluster.
(dict) --
An individual VPC security group and its status.
SecurityGroupIdentifier (string) --
The unique ID for this security group.
Status (string) --
The status of this security group.
IamRoleArn (string) --
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
ParameterGroup (dict) --
The parameter group being used by nodes in the cluster.
ParameterGroupName (string) --
The name of the parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
NodeIdsToReboot (list) --
The node IDs of one or more nodes to be rebooted.
(string) --
SSEDescription (dict) --
The description of the server-side encryption status on the specified DAX cluster.
Status (string) --
The current state of server-side encryption:
ENABLING - Server-side encryption is being enabled.
ENABLED - Server-side encryption is enabled.
DISABLING - Server-side encryption is being disabled.
DISABLED - Server-side encryption is disabled.
{'Clusters': {'SSEDescription': {'Status': 'ENABLING | ENABLED | DISABLING | '
'DISABLED'}}}
Returns information about all provisioned DAX clusters if no cluster identifier is specified, or about a specific DAX cluster if a cluster identifier is supplied.
If the cluster is in the CREATING state, only cluster level information will be displayed until all of the nodes are successfully provisioned.
If the cluster is in the DELETING state, only cluster level information will be displayed.
If nodes are currently being added to the DAX cluster, node endpoint information and creation time for the additional nodes will not be displayed until they are completely provisioned. When the DAX cluster state is available , the cluster is ready for use.
If nodes are currently being removed from the DAX cluster, no endpoint information for the removed nodes is displayed.
See also: AWS API Documentation
Request Syntax
client.describe_clusters(
ClusterNames=[
'string',
],
MaxResults=123,
NextToken='string'
)
list
The names of the DAX clusters being described.
(string) --
integer
The maximum number of results to include in the response. If more results exist than the specified MaxResults value, a token is included in the response so that the remaining results can be retrieved.
The value for MaxResults must be between 20 and 100.
string
An optional token returned from a prior request. Use this token for pagination of results from this action. If this parameter is specified, the response includes only results beyond the token, up to the value specified by MaxResults .
dict
Response Syntax
{
'NextToken': 'string',
'Clusters': [
{
'ClusterName': 'string',
'Description': 'string',
'ClusterArn': 'string',
'TotalNodes': 123,
'ActiveNodes': 123,
'NodeType': 'string',
'Status': 'string',
'ClusterDiscoveryEndpoint': {
'Address': 'string',
'Port': 123
},
'NodeIdsToRemove': [
'string',
],
'Nodes': [
{
'NodeId': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'NodeCreateTime': datetime(2015, 1, 1),
'AvailabilityZone': 'string',
'NodeStatus': 'string',
'ParameterGroupStatus': 'string'
},
],
'PreferredMaintenanceWindow': 'string',
'NotificationConfiguration': {
'TopicArn': 'string',
'TopicStatus': 'string'
},
'SubnetGroup': 'string',
'SecurityGroups': [
{
'SecurityGroupIdentifier': 'string',
'Status': 'string'
},
],
'IamRoleArn': 'string',
'ParameterGroup': {
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'NodeIdsToReboot': [
'string',
]
},
'SSEDescription': {
'Status': 'ENABLING'|'ENABLED'|'DISABLING'|'DISABLED'
}
},
]
}
Response Structure
(dict) --
NextToken (string) --
Provides an identifier to allow retrieval of paginated results.
Clusters (list) --
The descriptions of your DAX clusters, in response to a DescribeClusters request.
(dict) --
Contains all of the attributes of a specific DAX cluster.
ClusterName (string) --
The name of the DAX cluster.
Description (string) --
The description of the cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) that uniquely identifies the cluster.
TotalNodes (integer) --
The total number of nodes in the cluster.
ActiveNodes (integer) --
The number of nodes in the cluster that are active (i.e., capable of serving requests).
NodeType (string) --
The node type for the nodes in the cluster. (All nodes in a DAX cluster are of the same type.)
Status (string) --
The current status of the cluster.
ClusterDiscoveryEndpoint (dict) --
The configuration endpoint for this DAX cluster, consisting of a DNS name and a port number. Client applications can specify this endpoint, rather than an individual node endpoint, and allow the DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeIdsToRemove (list) --
A list of nodes to be removed from the cluster.
(string) --
Nodes (list) --
A list of nodes that are currently in the cluster.
(dict) --
Represents an individual node within a DAX cluster.
NodeId (string) --
A system-generated identifier for the node.
Endpoint (dict) --
The endpoint for the node, consisting of a DNS name and a port number. Client applications can connect directly to a node endpoint, if desired (as an alternative to allowing DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeCreateTime (datetime) --
The date and time (in UNIX epoch format) when the node was launched.
AvailabilityZone (string) --
The Availability Zone (AZ) in which the node has been deployed.
NodeStatus (string) --
The current status of the node. For example: available .
ParameterGroupStatus (string) --
The status of the parameter group associated with this node. For example, in-sync .
PreferredMaintenanceWindow (string) --
A range of time when maintenance of DAX cluster software will be performed. For example: sun:01:00-sun:09:00 . Cluster maintenance normally takes less than 30 minutes, and is performed automatically within the maintenance window.
NotificationConfiguration (dict) --
Describes a notification topic and its status. Notification topics are used for publishing DAX events to subscribers using Amazon Simple Notification Service (SNS).
TopicArn (string) --
The Amazon Resource Name (ARN) that identifies the topic.
TopicStatus (string) --
The current state of the topic.
SubnetGroup (string) --
The subnet group where the DAX cluster is running.
SecurityGroups (list) --
A list of security groups, and the status of each, for the nodes in the cluster.
(dict) --
An individual VPC security group and its status.
SecurityGroupIdentifier (string) --
The unique ID for this security group.
Status (string) --
The status of this security group.
IamRoleArn (string) --
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
ParameterGroup (dict) --
The parameter group being used by nodes in the cluster.
ParameterGroupName (string) --
The name of the parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
NodeIdsToReboot (list) --
The node IDs of one or more nodes to be rebooted.
(string) --
SSEDescription (dict) --
The description of the server-side encryption status on the specified DAX cluster.
Status (string) --
The current state of server-side encryption:
ENABLING - Server-side encryption is being enabled.
ENABLED - Server-side encryption is enabled.
DISABLING - Server-side encryption is being disabled.
DISABLED - Server-side encryption is disabled.
{'Cluster': {'SSEDescription': {'Status': 'ENABLING | ENABLED | DISABLING | '
'DISABLED'}}}
Adds one or more nodes to a DAX cluster.
See also: AWS API Documentation
Request Syntax
client.increase_replication_factor(
ClusterName='string',
NewReplicationFactor=123,
AvailabilityZones=[
'string',
]
)
string
[REQUIRED]
The name of the DAX cluster that will receive additional nodes.
integer
[REQUIRED]
The new number of nodes for the DAX cluster.
list
The Availability Zones (AZs) in which the cluster nodes will be created. All nodes belonging to the cluster are placed in these Availability Zones. Use this parameter if you want to distribute the nodes across multiple AZs.
(string) --
dict
Response Syntax
{
'Cluster': {
'ClusterName': 'string',
'Description': 'string',
'ClusterArn': 'string',
'TotalNodes': 123,
'ActiveNodes': 123,
'NodeType': 'string',
'Status': 'string',
'ClusterDiscoveryEndpoint': {
'Address': 'string',
'Port': 123
},
'NodeIdsToRemove': [
'string',
],
'Nodes': [
{
'NodeId': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'NodeCreateTime': datetime(2015, 1, 1),
'AvailabilityZone': 'string',
'NodeStatus': 'string',
'ParameterGroupStatus': 'string'
},
],
'PreferredMaintenanceWindow': 'string',
'NotificationConfiguration': {
'TopicArn': 'string',
'TopicStatus': 'string'
},
'SubnetGroup': 'string',
'SecurityGroups': [
{
'SecurityGroupIdentifier': 'string',
'Status': 'string'
},
],
'IamRoleArn': 'string',
'ParameterGroup': {
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'NodeIdsToReboot': [
'string',
]
},
'SSEDescription': {
'Status': 'ENABLING'|'ENABLED'|'DISABLING'|'DISABLED'
}
}
}
Response Structure
(dict) --
Cluster (dict) --
A description of the DAX cluster. with its new replication factor.
ClusterName (string) --
The name of the DAX cluster.
Description (string) --
The description of the cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) that uniquely identifies the cluster.
TotalNodes (integer) --
The total number of nodes in the cluster.
ActiveNodes (integer) --
The number of nodes in the cluster that are active (i.e., capable of serving requests).
NodeType (string) --
The node type for the nodes in the cluster. (All nodes in a DAX cluster are of the same type.)
Status (string) --
The current status of the cluster.
ClusterDiscoveryEndpoint (dict) --
The configuration endpoint for this DAX cluster, consisting of a DNS name and a port number. Client applications can specify this endpoint, rather than an individual node endpoint, and allow the DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeIdsToRemove (list) --
A list of nodes to be removed from the cluster.
(string) --
Nodes (list) --
A list of nodes that are currently in the cluster.
(dict) --
Represents an individual node within a DAX cluster.
NodeId (string) --
A system-generated identifier for the node.
Endpoint (dict) --
The endpoint for the node, consisting of a DNS name and a port number. Client applications can connect directly to a node endpoint, if desired (as an alternative to allowing DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeCreateTime (datetime) --
The date and time (in UNIX epoch format) when the node was launched.
AvailabilityZone (string) --
The Availability Zone (AZ) in which the node has been deployed.
NodeStatus (string) --
The current status of the node. For example: available .
ParameterGroupStatus (string) --
The status of the parameter group associated with this node. For example, in-sync .
PreferredMaintenanceWindow (string) --
A range of time when maintenance of DAX cluster software will be performed. For example: sun:01:00-sun:09:00 . Cluster maintenance normally takes less than 30 minutes, and is performed automatically within the maintenance window.
NotificationConfiguration (dict) --
Describes a notification topic and its status. Notification topics are used for publishing DAX events to subscribers using Amazon Simple Notification Service (SNS).
TopicArn (string) --
The Amazon Resource Name (ARN) that identifies the topic.
TopicStatus (string) --
The current state of the topic.
SubnetGroup (string) --
The subnet group where the DAX cluster is running.
SecurityGroups (list) --
A list of security groups, and the status of each, for the nodes in the cluster.
(dict) --
An individual VPC security group and its status.
SecurityGroupIdentifier (string) --
The unique ID for this security group.
Status (string) --
The status of this security group.
IamRoleArn (string) --
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
ParameterGroup (dict) --
The parameter group being used by nodes in the cluster.
ParameterGroupName (string) --
The name of the parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
NodeIdsToReboot (list) --
The node IDs of one or more nodes to be rebooted.
(string) --
SSEDescription (dict) --
The description of the server-side encryption status on the specified DAX cluster.
Status (string) --
The current state of server-side encryption:
ENABLING - Server-side encryption is being enabled.
ENABLED - Server-side encryption is enabled.
DISABLING - Server-side encryption is being disabled.
DISABLED - Server-side encryption is disabled.
{'Cluster': {'SSEDescription': {'Status': 'ENABLING | ENABLED | DISABLING | '
'DISABLED'}}}
Reboots a single node of a DAX cluster. The reboot action takes place as soon as possible. During the reboot, the node status is set to REBOOTING.
See also: AWS API Documentation
Request Syntax
client.reboot_node(
ClusterName='string',
NodeId='string'
)
string
[REQUIRED]
The name of the DAX cluster containing the node to be rebooted.
string
[REQUIRED]
The system-assigned ID of the node to be rebooted.
dict
Response Syntax
{
'Cluster': {
'ClusterName': 'string',
'Description': 'string',
'ClusterArn': 'string',
'TotalNodes': 123,
'ActiveNodes': 123,
'NodeType': 'string',
'Status': 'string',
'ClusterDiscoveryEndpoint': {
'Address': 'string',
'Port': 123
},
'NodeIdsToRemove': [
'string',
],
'Nodes': [
{
'NodeId': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'NodeCreateTime': datetime(2015, 1, 1),
'AvailabilityZone': 'string',
'NodeStatus': 'string',
'ParameterGroupStatus': 'string'
},
],
'PreferredMaintenanceWindow': 'string',
'NotificationConfiguration': {
'TopicArn': 'string',
'TopicStatus': 'string'
},
'SubnetGroup': 'string',
'SecurityGroups': [
{
'SecurityGroupIdentifier': 'string',
'Status': 'string'
},
],
'IamRoleArn': 'string',
'ParameterGroup': {
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'NodeIdsToReboot': [
'string',
]
},
'SSEDescription': {
'Status': 'ENABLING'|'ENABLED'|'DISABLING'|'DISABLED'
}
}
}
Response Structure
(dict) --
Cluster (dict) --
A description of the DAX cluster after a node has been rebooted.
ClusterName (string) --
The name of the DAX cluster.
Description (string) --
The description of the cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) that uniquely identifies the cluster.
TotalNodes (integer) --
The total number of nodes in the cluster.
ActiveNodes (integer) --
The number of nodes in the cluster that are active (i.e., capable of serving requests).
NodeType (string) --
The node type for the nodes in the cluster. (All nodes in a DAX cluster are of the same type.)
Status (string) --
The current status of the cluster.
ClusterDiscoveryEndpoint (dict) --
The configuration endpoint for this DAX cluster, consisting of a DNS name and a port number. Client applications can specify this endpoint, rather than an individual node endpoint, and allow the DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeIdsToRemove (list) --
A list of nodes to be removed from the cluster.
(string) --
Nodes (list) --
A list of nodes that are currently in the cluster.
(dict) --
Represents an individual node within a DAX cluster.
NodeId (string) --
A system-generated identifier for the node.
Endpoint (dict) --
The endpoint for the node, consisting of a DNS name and a port number. Client applications can connect directly to a node endpoint, if desired (as an alternative to allowing DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeCreateTime (datetime) --
The date and time (in UNIX epoch format) when the node was launched.
AvailabilityZone (string) --
The Availability Zone (AZ) in which the node has been deployed.
NodeStatus (string) --
The current status of the node. For example: available .
ParameterGroupStatus (string) --
The status of the parameter group associated with this node. For example, in-sync .
PreferredMaintenanceWindow (string) --
A range of time when maintenance of DAX cluster software will be performed. For example: sun:01:00-sun:09:00 . Cluster maintenance normally takes less than 30 minutes, and is performed automatically within the maintenance window.
NotificationConfiguration (dict) --
Describes a notification topic and its status. Notification topics are used for publishing DAX events to subscribers using Amazon Simple Notification Service (SNS).
TopicArn (string) --
The Amazon Resource Name (ARN) that identifies the topic.
TopicStatus (string) --
The current state of the topic.
SubnetGroup (string) --
The subnet group where the DAX cluster is running.
SecurityGroups (list) --
A list of security groups, and the status of each, for the nodes in the cluster.
(dict) --
An individual VPC security group and its status.
SecurityGroupIdentifier (string) --
The unique ID for this security group.
Status (string) --
The status of this security group.
IamRoleArn (string) --
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
ParameterGroup (dict) --
The parameter group being used by nodes in the cluster.
ParameterGroupName (string) --
The name of the parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
NodeIdsToReboot (list) --
The node IDs of one or more nodes to be rebooted.
(string) --
SSEDescription (dict) --
The description of the server-side encryption status on the specified DAX cluster.
Status (string) --
The current state of server-side encryption:
ENABLING - Server-side encryption is being enabled.
ENABLED - Server-side encryption is enabled.
DISABLING - Server-side encryption is being disabled.
DISABLED - Server-side encryption is disabled.
{'Cluster': {'SSEDescription': {'Status': 'ENABLING | ENABLED | DISABLING | '
'DISABLED'}}}
Modifies the settings for a DAX cluster. You can use this action to change one or more cluster configuration parameters by specifying the parameters and the new values.
See also: AWS API Documentation
Request Syntax
client.update_cluster(
ClusterName='string',
Description='string',
PreferredMaintenanceWindow='string',
NotificationTopicArn='string',
NotificationTopicStatus='string',
ParameterGroupName='string',
SecurityGroupIds=[
'string',
]
)
string
[REQUIRED]
The name of the DAX cluster to be modified.
string
A description of the changes being made to the cluster.
string
A range of time when maintenance of DAX cluster software will be performed. For example: sun:01:00-sun:09:00 . Cluster maintenance normally takes less than 30 minutes, and is performed automatically within the maintenance window.
string
The Amazon Resource Name (ARN) that identifies the topic.
string
The current state of the topic.
string
The name of a parameter group for this cluster.
list
A list of user-specified security group IDs to be assigned to each node in the DAX cluster. If this parameter is not specified, DAX assigns the default VPC security group to each node.
(string) --
dict
Response Syntax
{
'Cluster': {
'ClusterName': 'string',
'Description': 'string',
'ClusterArn': 'string',
'TotalNodes': 123,
'ActiveNodes': 123,
'NodeType': 'string',
'Status': 'string',
'ClusterDiscoveryEndpoint': {
'Address': 'string',
'Port': 123
},
'NodeIdsToRemove': [
'string',
],
'Nodes': [
{
'NodeId': 'string',
'Endpoint': {
'Address': 'string',
'Port': 123
},
'NodeCreateTime': datetime(2015, 1, 1),
'AvailabilityZone': 'string',
'NodeStatus': 'string',
'ParameterGroupStatus': 'string'
},
],
'PreferredMaintenanceWindow': 'string',
'NotificationConfiguration': {
'TopicArn': 'string',
'TopicStatus': 'string'
},
'SubnetGroup': 'string',
'SecurityGroups': [
{
'SecurityGroupIdentifier': 'string',
'Status': 'string'
},
],
'IamRoleArn': 'string',
'ParameterGroup': {
'ParameterGroupName': 'string',
'ParameterApplyStatus': 'string',
'NodeIdsToReboot': [
'string',
]
},
'SSEDescription': {
'Status': 'ENABLING'|'ENABLED'|'DISABLING'|'DISABLED'
}
}
}
Response Structure
(dict) --
Cluster (dict) --
A description of the DAX cluster, after it has been modified.
ClusterName (string) --
The name of the DAX cluster.
Description (string) --
The description of the cluster.
ClusterArn (string) --
The Amazon Resource Name (ARN) that uniquely identifies the cluster.
TotalNodes (integer) --
The total number of nodes in the cluster.
ActiveNodes (integer) --
The number of nodes in the cluster that are active (i.e., capable of serving requests).
NodeType (string) --
The node type for the nodes in the cluster. (All nodes in a DAX cluster are of the same type.)
Status (string) --
The current status of the cluster.
ClusterDiscoveryEndpoint (dict) --
The configuration endpoint for this DAX cluster, consisting of a DNS name and a port number. Client applications can specify this endpoint, rather than an individual node endpoint, and allow the DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeIdsToRemove (list) --
A list of nodes to be removed from the cluster.
(string) --
Nodes (list) --
A list of nodes that are currently in the cluster.
(dict) --
Represents an individual node within a DAX cluster.
NodeId (string) --
A system-generated identifier for the node.
Endpoint (dict) --
The endpoint for the node, consisting of a DNS name and a port number. Client applications can connect directly to a node endpoint, if desired (as an alternative to allowing DAX client software to intelligently route requests and responses to nodes in the DAX cluster.
Address (string) --
The DNS hostname of the endpoint.
Port (integer) --
The port number that applications should use to connect to the endpoint.
NodeCreateTime (datetime) --
The date and time (in UNIX epoch format) when the node was launched.
AvailabilityZone (string) --
The Availability Zone (AZ) in which the node has been deployed.
NodeStatus (string) --
The current status of the node. For example: available .
ParameterGroupStatus (string) --
The status of the parameter group associated with this node. For example, in-sync .
PreferredMaintenanceWindow (string) --
A range of time when maintenance of DAX cluster software will be performed. For example: sun:01:00-sun:09:00 . Cluster maintenance normally takes less than 30 minutes, and is performed automatically within the maintenance window.
NotificationConfiguration (dict) --
Describes a notification topic and its status. Notification topics are used for publishing DAX events to subscribers using Amazon Simple Notification Service (SNS).
TopicArn (string) --
The Amazon Resource Name (ARN) that identifies the topic.
TopicStatus (string) --
The current state of the topic.
SubnetGroup (string) --
The subnet group where the DAX cluster is running.
SecurityGroups (list) --
A list of security groups, and the status of each, for the nodes in the cluster.
(dict) --
An individual VPC security group and its status.
SecurityGroupIdentifier (string) --
The unique ID for this security group.
Status (string) --
The status of this security group.
IamRoleArn (string) --
A valid Amazon Resource Name (ARN) that identifies an IAM role. At runtime, DAX will assume this role and use the role's permissions to access DynamoDB on your behalf.
ParameterGroup (dict) --
The parameter group being used by nodes in the cluster.
ParameterGroupName (string) --
The name of the parameter group.
ParameterApplyStatus (string) --
The status of parameter updates.
NodeIdsToReboot (list) --
The node IDs of one or more nodes to be rebooted.
(string) --
SSEDescription (dict) --
The description of the server-side encryption status on the specified DAX cluster.
Status (string) --
The current state of server-side encryption:
ENABLING - Server-side encryption is being enabled.
ENABLED - Server-side encryption is enabled.
DISABLING - Server-side encryption is being disabled.
DISABLED - Server-side encryption is disabled.