2019/04/04 - Amazon Elastic Container Service for Kubernetes - 6 updated api methods
Changes Added support to enable or disable publishing Kubernetes cluster logs in AWS CloudWatch
{'logging': {'clusterLogging': [{'enabled': 'boolean',
'types': ['api | audit | authenticator | '
'controllerManager | scheduler']}]}}
Response {'cluster': {'logging': {'clusterLogging': [{'enabled': 'boolean',
'types': ['api | audit | '
'authenticator | '
'controllerManager | '
'scheduler']}]}}}
Creates an Amazon EKS control plane.
The Amazon EKS control plane consists of control plane instances that run the Kubernetes software, like etcd and the API server. The control plane runs in an account managed by AWS, and the Kubernetes API is exposed via the Amazon EKS API server endpoint. Each Amazon EKS cluster control plane is single-tenant and unique, and runs on its own set of Amazon EC2 instances.
The cluster control plane is provisioned across multiple Availability Zones and fronted by an Elastic Load Balancing Network Load Balancer. Amazon EKS also provisions elastic network interfaces in your VPC subnets to provide connectivity from the control plane instances to the worker nodes (for example, to support kubectl exec , logs , and proxy data flows).
Amazon EKS worker nodes run in your AWS account and connect to your cluster's control plane via the Kubernetes API server endpoint and a certificate file that is created for your cluster.
You can use the endpointPublicAccess and endpointPrivateAccess parameters to enable or disable public and private access to your cluster's Kubernetes API server endpoint. By default, public access is enabled and private access is disabled. For more information, see Amazon EKS Cluster Endpoint Access Control in the * Amazon EKS User Guide * .
You can use the logging parameter to enable or disable exporting the Kubernetes control plane logs for your cluster to CloudWatch Logs. By default, cluster control plane logs are not exported to CloudWatch Logs. For more information, see Amazon EKS Cluster Control Plane Logs in the * Amazon EKS User Guide * .
Note
CloudWatch Logs ingestion, archive storage, and data scanning rates apply to exported control plane logs. For more information, see Amazon CloudWatch Pricing .
Cluster creation typically takes between 10 and 15 minutes. After you create an Amazon EKS cluster, you must configure your Kubernetes tooling to communicate with the API server and launch worker nodes into your cluster. For more information, see Managing Cluster Authentication and Launching Amazon EKS Worker Nodes in the Amazon EKS User Guide .
See also: AWS API Documentation
Request Syntax
client.create_cluster(
name='string',
version='string',
roleArn='string',
resourcesVpcConfig={
'subnetIds': [
'string',
],
'securityGroupIds': [
'string',
],
'endpointPublicAccess': True|False,
'endpointPrivateAccess': True|False
},
logging={
'clusterLogging': [
{
'types': [
'api'|'audit'|'authenticator'|'controllerManager'|'scheduler',
],
'enabled': True|False
},
]
},
clientRequestToken='string'
)
string
[REQUIRED]
The unique name to give to your cluster.
string
The desired Kubernetes version for your cluster. If you do not specify a value here, the latest version available in Amazon EKS is used.
string
[REQUIRED]
The Amazon Resource Name (ARN) of the IAM role that provides permissions for Amazon EKS to make calls to other AWS API operations on your behalf. For more information, see Amazon EKS Service IAM Role in the * Amazon EKS User Guide * .
dict
[REQUIRED]
The VPC configuration used by the cluster control plane. Amazon EKS VPC resources have specific requirements to work properly with Kubernetes. For more information, see Cluster VPC Considerations and Cluster Security Group Considerations in the Amazon EKS User Guide . You must specify at least two subnets. You may specify up to five security groups, but we recommend that you use a dedicated security group for your cluster control plane.
subnetIds (list) --
Specify subnets for your Amazon EKS worker nodes. Amazon EKS creates cross-account elastic network interfaces in these subnets to allow communication between your worker nodes and the Kubernetes control plane.
(string) --
securityGroupIds (list) --
Specify one or more security groups for the cross-account elastic network interfaces that Amazon EKS creates to use to allow communication between your worker nodes and the Kubernetes control plane. If you do not specify a security group, the default security group for your VPC is used.
(string) --
endpointPublicAccess (boolean) --
Set this value to false to disable public access for your cluster's Kubernetes API server endpoint. If you disable public access, your cluster's Kubernetes API server can only receive requests from within the cluster VPC. The default value for this parameter is true , which enables public access for your Kubernetes API server. For more information, see Amazon EKS Cluster Endpoint Access Control in the * Amazon EKS User Guide * .
endpointPrivateAccess (boolean) --
Set this value to true to enable private access for your cluster's Kubernetes API server endpoint. If you enable private access, Kubernetes API requests from within your cluster's VPC will use the private VPC endpoint. The default value for this parameter is false , which disables private access for your Kubernetes API server. For more information, see Amazon EKS Cluster Endpoint Access Control in the * Amazon EKS User Guide * .
dict
Enable or disable exporting the Kubernetes control plane logs for your cluster to CloudWatch Logs. By default, cluster control plane logs are not exported to CloudWatch Logs. For more information, see Amazon EKS Cluster Control Plane Logs in the * Amazon EKS User Guide * .
Note
CloudWatch Logs ingestion, archive storage, and data scanning rates apply to exported control plane logs. For more information, see Amazon CloudWatch Pricing .
clusterLogging (list) --
The cluster control plane logging configuration for your cluster.
(dict) --
An object representing the enabled or disabled Kubernetes control plane logs for your cluster.
types (list) --
The available cluster control plane log types.
(string) --
enabled (boolean) --
If a log type is enabled, then that log type exports its control plane logs to CloudWatch Logs. If a log type is not enabled, then that log type does not export its control plane logs. Each individual log type can be enabled or disabled independently.
string
Unique, case-sensitive identifier that you provide to ensure the idempotency of the request.
This field is autopopulated if not provided.
dict
Response Syntax
{
'cluster': {
'name': 'string',
'arn': 'string',
'createdAt': datetime(2015, 1, 1),
'version': 'string',
'endpoint': 'string',
'roleArn': 'string',
'resourcesVpcConfig': {
'subnetIds': [
'string',
],
'securityGroupIds': [
'string',
],
'vpcId': 'string',
'endpointPublicAccess': True|False,
'endpointPrivateAccess': True|False
},
'logging': {
'clusterLogging': [
{
'types': [
'api'|'audit'|'authenticator'|'controllerManager'|'scheduler',
],
'enabled': True|False
},
]
},
'status': 'CREATING'|'ACTIVE'|'DELETING'|'FAILED',
'certificateAuthority': {
'data': 'string'
},
'clientRequestToken': 'string',
'platformVersion': 'string'
}
}
Response Structure
(dict) --
cluster (dict) --
The full description of your new cluster.
name (string) --
The name of the cluster.
arn (string) --
The Amazon Resource Name (ARN) of the cluster.
createdAt (datetime) --
The Unix epoch timestamp in seconds for when the cluster was created.
version (string) --
The Kubernetes server version for the cluster.
endpoint (string) --
The endpoint for your Kubernetes API server.
roleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that provides permissions for the Kubernetes control plane to make calls to AWS API operations on your behalf.
resourcesVpcConfig (dict) --
The VPC configuration used by the cluster control plane. Amazon EKS VPC resources have specific requirements to work properly with Kubernetes. For more information, see Cluster VPC Considerations and Cluster Security Group Considerations in the Amazon EKS User Guide .
subnetIds (list) --
The subnets associated with your cluster.
(string) --
securityGroupIds (list) --
The security groups associated with the cross-account elastic network interfaces that are used to allow communication between your worker nodes and the Kubernetes control plane.
(string) --
vpcId (string) --
The VPC associated with your cluster.
endpointPublicAccess (boolean) --
This parameter indicates whether the Amazon EKS public API server endpoint is enabled. If the Amazon EKS public API server endpoint is disabled, your cluster's Kubernetes API server can only receive requests that originate from within the cluster VPC.
endpointPrivateAccess (boolean) --
This parameter indicates whether the Amazon EKS private API server endpoint is enabled. If the Amazon EKS private API server endpoint is enabled, Kubernetes API requests that originate from within your cluster's VPC will use the private VPC endpoint instead of traversing the internet.
logging (dict) --
The logging configuration for your cluster.
clusterLogging (list) --
The cluster control plane logging configuration for your cluster.
(dict) --
An object representing the enabled or disabled Kubernetes control plane logs for your cluster.
types (list) --
The available cluster control plane log types.
(string) --
enabled (boolean) --
If a log type is enabled, then that log type exports its control plane logs to CloudWatch Logs. If a log type is not enabled, then that log type does not export its control plane logs. Each individual log type can be enabled or disabled independently.
status (string) --
The current status of the cluster.
certificateAuthority (dict) --
The certificate-authority-data for your cluster.
data (string) --
The base64 encoded certificate data required to communicate with your cluster. Add this to the certificate-authority-data section of the kubeconfig file for your cluster.
clientRequestToken (string) --
Unique, case-sensitive identifier that you provide to ensure the idempotency of the request.
platformVersion (string) --
The platform version of your Amazon EKS cluster. For more information, see Platform Versions in the * Amazon EKS User Guide * .
{'cluster': {'logging': {'clusterLogging': [{'enabled': 'boolean',
'types': ['api | audit | '
'authenticator | '
'controllerManager | '
'scheduler']}]}}}
Deletes the Amazon EKS cluster control plane.
Note
If you have active services in your cluster that are associated with a load balancer, you must delete those services before deleting the cluster so that the load balancers are deleted properly. Otherwise, you can have orphaned resources in your VPC that prevent you from being able to delete the VPC. For more information, see Deleting a Cluster in the Amazon EKS User Guide .
See also: AWS API Documentation
Request Syntax
client.delete_cluster(
name='string'
)
string
[REQUIRED]
The name of the cluster to delete.
dict
Response Syntax
{
'cluster': {
'name': 'string',
'arn': 'string',
'createdAt': datetime(2015, 1, 1),
'version': 'string',
'endpoint': 'string',
'roleArn': 'string',
'resourcesVpcConfig': {
'subnetIds': [
'string',
],
'securityGroupIds': [
'string',
],
'vpcId': 'string',
'endpointPublicAccess': True|False,
'endpointPrivateAccess': True|False
},
'logging': {
'clusterLogging': [
{
'types': [
'api'|'audit'|'authenticator'|'controllerManager'|'scheduler',
],
'enabled': True|False
},
]
},
'status': 'CREATING'|'ACTIVE'|'DELETING'|'FAILED',
'certificateAuthority': {
'data': 'string'
},
'clientRequestToken': 'string',
'platformVersion': 'string'
}
}
Response Structure
(dict) --
cluster (dict) --
The full description of the cluster to delete.
name (string) --
The name of the cluster.
arn (string) --
The Amazon Resource Name (ARN) of the cluster.
createdAt (datetime) --
The Unix epoch timestamp in seconds for when the cluster was created.
version (string) --
The Kubernetes server version for the cluster.
endpoint (string) --
The endpoint for your Kubernetes API server.
roleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that provides permissions for the Kubernetes control plane to make calls to AWS API operations on your behalf.
resourcesVpcConfig (dict) --
The VPC configuration used by the cluster control plane. Amazon EKS VPC resources have specific requirements to work properly with Kubernetes. For more information, see Cluster VPC Considerations and Cluster Security Group Considerations in the Amazon EKS User Guide .
subnetIds (list) --
The subnets associated with your cluster.
(string) --
securityGroupIds (list) --
The security groups associated with the cross-account elastic network interfaces that are used to allow communication between your worker nodes and the Kubernetes control plane.
(string) --
vpcId (string) --
The VPC associated with your cluster.
endpointPublicAccess (boolean) --
This parameter indicates whether the Amazon EKS public API server endpoint is enabled. If the Amazon EKS public API server endpoint is disabled, your cluster's Kubernetes API server can only receive requests that originate from within the cluster VPC.
endpointPrivateAccess (boolean) --
This parameter indicates whether the Amazon EKS private API server endpoint is enabled. If the Amazon EKS private API server endpoint is enabled, Kubernetes API requests that originate from within your cluster's VPC will use the private VPC endpoint instead of traversing the internet.
logging (dict) --
The logging configuration for your cluster.
clusterLogging (list) --
The cluster control plane logging configuration for your cluster.
(dict) --
An object representing the enabled or disabled Kubernetes control plane logs for your cluster.
types (list) --
The available cluster control plane log types.
(string) --
enabled (boolean) --
If a log type is enabled, then that log type exports its control plane logs to CloudWatch Logs. If a log type is not enabled, then that log type does not export its control plane logs. Each individual log type can be enabled or disabled independently.
status (string) --
The current status of the cluster.
certificateAuthority (dict) --
The certificate-authority-data for your cluster.
data (string) --
The base64 encoded certificate data required to communicate with your cluster. Add this to the certificate-authority-data section of the kubeconfig file for your cluster.
clientRequestToken (string) --
Unique, case-sensitive identifier that you provide to ensure the idempotency of the request.
platformVersion (string) --
The platform version of your Amazon EKS cluster. For more information, see Platform Versions in the * Amazon EKS User Guide * .
{'cluster': {'logging': {'clusterLogging': [{'enabled': 'boolean',
'types': ['api | audit | '
'authenticator | '
'controllerManager | '
'scheduler']}]}}}
Returns descriptive information about an Amazon EKS cluster.
The API server endpoint and certificate authority data returned by this operation are required for kubelet and kubectl to communicate with your Kubernetes API server. For more information, see Create a kubeconfig for Amazon EKS .
Note
The API server endpoint and certificate authority data are not available until the cluster reaches the ACTIVE state.
See also: AWS API Documentation
Request Syntax
client.describe_cluster(
name='string'
)
string
[REQUIRED]
The name of the cluster to describe.
dict
Response Syntax
{
'cluster': {
'name': 'string',
'arn': 'string',
'createdAt': datetime(2015, 1, 1),
'version': 'string',
'endpoint': 'string',
'roleArn': 'string',
'resourcesVpcConfig': {
'subnetIds': [
'string',
],
'securityGroupIds': [
'string',
],
'vpcId': 'string',
'endpointPublicAccess': True|False,
'endpointPrivateAccess': True|False
},
'logging': {
'clusterLogging': [
{
'types': [
'api'|'audit'|'authenticator'|'controllerManager'|'scheduler',
],
'enabled': True|False
},
]
},
'status': 'CREATING'|'ACTIVE'|'DELETING'|'FAILED',
'certificateAuthority': {
'data': 'string'
},
'clientRequestToken': 'string',
'platformVersion': 'string'
}
}
Response Structure
(dict) --
cluster (dict) --
The full description of your specified cluster.
name (string) --
The name of the cluster.
arn (string) --
The Amazon Resource Name (ARN) of the cluster.
createdAt (datetime) --
The Unix epoch timestamp in seconds for when the cluster was created.
version (string) --
The Kubernetes server version for the cluster.
endpoint (string) --
The endpoint for your Kubernetes API server.
roleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that provides permissions for the Kubernetes control plane to make calls to AWS API operations on your behalf.
resourcesVpcConfig (dict) --
The VPC configuration used by the cluster control plane. Amazon EKS VPC resources have specific requirements to work properly with Kubernetes. For more information, see Cluster VPC Considerations and Cluster Security Group Considerations in the Amazon EKS User Guide .
subnetIds (list) --
The subnets associated with your cluster.
(string) --
securityGroupIds (list) --
The security groups associated with the cross-account elastic network interfaces that are used to allow communication between your worker nodes and the Kubernetes control plane.
(string) --
vpcId (string) --
The VPC associated with your cluster.
endpointPublicAccess (boolean) --
This parameter indicates whether the Amazon EKS public API server endpoint is enabled. If the Amazon EKS public API server endpoint is disabled, your cluster's Kubernetes API server can only receive requests that originate from within the cluster VPC.
endpointPrivateAccess (boolean) --
This parameter indicates whether the Amazon EKS private API server endpoint is enabled. If the Amazon EKS private API server endpoint is enabled, Kubernetes API requests that originate from within your cluster's VPC will use the private VPC endpoint instead of traversing the internet.
logging (dict) --
The logging configuration for your cluster.
clusterLogging (list) --
The cluster control plane logging configuration for your cluster.
(dict) --
An object representing the enabled or disabled Kubernetes control plane logs for your cluster.
types (list) --
The available cluster control plane log types.
(string) --
enabled (boolean) --
If a log type is enabled, then that log type exports its control plane logs to CloudWatch Logs. If a log type is not enabled, then that log type does not export its control plane logs. Each individual log type can be enabled or disabled independently.
status (string) --
The current status of the cluster.
certificateAuthority (dict) --
The certificate-authority-data for your cluster.
data (string) --
The base64 encoded certificate data required to communicate with your cluster. Add this to the certificate-authority-data section of the kubeconfig file for your cluster.
clientRequestToken (string) --
Unique, case-sensitive identifier that you provide to ensure the idempotency of the request.
platformVersion (string) --
The platform version of your Amazon EKS cluster. For more information, see Platform Versions in the * Amazon EKS User Guide * .
{'update': {'params': {'type': ['ClusterLogging']}, 'type': ['LoggingUpdate']}}
Returns descriptive information about an update against your Amazon EKS cluster.
When the status of the update is Succeeded , the update is complete. If an update fails, the status is Failed , and an error detail explains the reason for the failure.
See also: AWS API Documentation
Request Syntax
client.describe_update(
name='string',
updateId='string'
)
string
[REQUIRED]
The name of the Amazon EKS cluster to update.
string
[REQUIRED]
The ID of the update to describe.
dict
Response Syntax
{
'update': {
'id': 'string',
'status': 'InProgress'|'Failed'|'Cancelled'|'Successful',
'type': 'VersionUpdate'|'EndpointAccessUpdate'|'LoggingUpdate',
'params': [
{
'type': 'Version'|'PlatformVersion'|'EndpointPrivateAccess'|'EndpointPublicAccess'|'ClusterLogging',
'value': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'errors': [
{
'errorCode': 'SubnetNotFound'|'SecurityGroupNotFound'|'EniLimitReached'|'IpNotAvailable'|'AccessDenied'|'OperationNotPermitted'|'VpcIdNotFound'|'Unknown',
'errorMessage': 'string',
'resourceIds': [
'string',
]
},
]
}
}
Response Structure
(dict) --
update (dict) --
The full description of the specified update.
id (string) --
A UUID that is used to track the update.
status (string) --
The current status of the update.
type (string) --
The type of the update.
params (list) --
A key-value map that contains the parameters associated with the update.
(dict) --
An object representing the details of an update request.
type (string) --
The keys associated with an update request.
value (string) --
The value of the keys submitted as part of an update request.
createdAt (datetime) --
The Unix epoch timestamp in seconds for when the update was created.
errors (list) --
Any errors associated with a Failed update.
(dict) --
An object representing an error when an asynchronous operation fails.
errorCode (string) --
A brief description of the error.
SubnetNotFound : One of the subnets associated with the cluster could not be found.
SecurityGroupNotFound : One of the security groups associated with the cluster could not be found.
EniLimitReached : You have reached the elastic network interface limit for your account.
IpNotAvailable : A subnet associated with the cluster does not have any free IP addresses.
AccessDenied : You do not have permissions to perform the specified operation.
OperationNotPermitted : The service role associated with the cluster does not have the required access permissions for Amazon EKS.
VpcIdNotFound : The VPC associated with the cluster could not be found.
errorMessage (string) --
A more complete description of the error.
resourceIds (list) --
An optional field that contains the resource IDs associated with the error.
(string) --
{'logging': {'clusterLogging': [{'enabled': 'boolean',
'types': ['api | audit | authenticator | '
'controllerManager | scheduler']}]}}
Response {'update': {'params': {'type': ['ClusterLogging']}, 'type': ['LoggingUpdate']}}
Updates an Amazon EKS cluster configuration. Your cluster continues to function during the update. The response output includes an update ID that you can use to track the status of your cluster update with the DescribeUpdate API operation.
You can use this API operation to enable or disable public and private access to your cluster's Kubernetes API server endpoint. By default, public access is enabled and private access is disabled. For more information, see Amazon EKS Cluster Endpoint Access Control in the * Amazon EKS User Guide * .
You can also use this API operation to enable or disable exporting the Kubernetes control plane logs for your cluster to CloudWatch Logs. By default, cluster control plane logs are not exported to CloudWatch Logs. For more information, see Amazon EKS Cluster Control Plane Logs in the * Amazon EKS User Guide * .
Note
CloudWatch Logs ingestion, archive storage, and data scanning rates apply to exported control plane logs. For more information, see Amazon CloudWatch Pricing .
Cluster updates are asynchronous, and they should finish within a few minutes. During an update, the cluster status moves to UPDATING (this status transition is eventually consistent). When the update is complete (either Failed or Successful ), the cluster status moves to Active .
See also: AWS API Documentation
Request Syntax
client.update_cluster_config(
name='string',
resourcesVpcConfig={
'subnetIds': [
'string',
],
'securityGroupIds': [
'string',
],
'endpointPublicAccess': True|False,
'endpointPrivateAccess': True|False
},
logging={
'clusterLogging': [
{
'types': [
'api'|'audit'|'authenticator'|'controllerManager'|'scheduler',
],
'enabled': True|False
},
]
},
clientRequestToken='string'
)
string
[REQUIRED]
The name of the Amazon EKS cluster to update.
dict
An object representing the VPC configuration to use for an Amazon EKS cluster.
subnetIds (list) --
Specify subnets for your Amazon EKS worker nodes. Amazon EKS creates cross-account elastic network interfaces in these subnets to allow communication between your worker nodes and the Kubernetes control plane.
(string) --
securityGroupIds (list) --
Specify one or more security groups for the cross-account elastic network interfaces that Amazon EKS creates to use to allow communication between your worker nodes and the Kubernetes control plane. If you do not specify a security group, the default security group for your VPC is used.
(string) --
endpointPublicAccess (boolean) --
Set this value to false to disable public access for your cluster's Kubernetes API server endpoint. If you disable public access, your cluster's Kubernetes API server can only receive requests from within the cluster VPC. The default value for this parameter is true , which enables public access for your Kubernetes API server. For more information, see Amazon EKS Cluster Endpoint Access Control in the * Amazon EKS User Guide * .
endpointPrivateAccess (boolean) --
Set this value to true to enable private access for your cluster's Kubernetes API server endpoint. If you enable private access, Kubernetes API requests from within your cluster's VPC will use the private VPC endpoint. The default value for this parameter is false , which disables private access for your Kubernetes API server. For more information, see Amazon EKS Cluster Endpoint Access Control in the * Amazon EKS User Guide * .
dict
Enable or disable exporting the Kubernetes control plane logs for your cluster to CloudWatch Logs. By default, cluster control plane logs are not exported to CloudWatch Logs. For more information, see Amazon EKS Cluster Control Plane Logs in the * Amazon EKS User Guide * .
Note
CloudWatch Logs ingestion, archive storage, and data scanning rates apply to exported control plane logs. For more information, see Amazon CloudWatch Pricing .
clusterLogging (list) --
The cluster control plane logging configuration for your cluster.
(dict) --
An object representing the enabled or disabled Kubernetes control plane logs for your cluster.
types (list) --
The available cluster control plane log types.
(string) --
enabled (boolean) --
If a log type is enabled, then that log type exports its control plane logs to CloudWatch Logs. If a log type is not enabled, then that log type does not export its control plane logs. Each individual log type can be enabled or disabled independently.
string
Unique, case-sensitive identifier that you provide to ensure the idempotency of the request.
This field is autopopulated if not provided.
dict
Response Syntax
{
'update': {
'id': 'string',
'status': 'InProgress'|'Failed'|'Cancelled'|'Successful',
'type': 'VersionUpdate'|'EndpointAccessUpdate'|'LoggingUpdate',
'params': [
{
'type': 'Version'|'PlatformVersion'|'EndpointPrivateAccess'|'EndpointPublicAccess'|'ClusterLogging',
'value': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'errors': [
{
'errorCode': 'SubnetNotFound'|'SecurityGroupNotFound'|'EniLimitReached'|'IpNotAvailable'|'AccessDenied'|'OperationNotPermitted'|'VpcIdNotFound'|'Unknown',
'errorMessage': 'string',
'resourceIds': [
'string',
]
},
]
}
}
Response Structure
(dict) --
update (dict) --
An object representing an asynchronous update.
id (string) --
A UUID that is used to track the update.
status (string) --
The current status of the update.
type (string) --
The type of the update.
params (list) --
A key-value map that contains the parameters associated with the update.
(dict) --
An object representing the details of an update request.
type (string) --
The keys associated with an update request.
value (string) --
The value of the keys submitted as part of an update request.
createdAt (datetime) --
The Unix epoch timestamp in seconds for when the update was created.
errors (list) --
Any errors associated with a Failed update.
(dict) --
An object representing an error when an asynchronous operation fails.
errorCode (string) --
A brief description of the error.
SubnetNotFound : One of the subnets associated with the cluster could not be found.
SecurityGroupNotFound : One of the security groups associated with the cluster could not be found.
EniLimitReached : You have reached the elastic network interface limit for your account.
IpNotAvailable : A subnet associated with the cluster does not have any free IP addresses.
AccessDenied : You do not have permissions to perform the specified operation.
OperationNotPermitted : The service role associated with the cluster does not have the required access permissions for Amazon EKS.
VpcIdNotFound : The VPC associated with the cluster could not be found.
errorMessage (string) --
A more complete description of the error.
resourceIds (list) --
An optional field that contains the resource IDs associated with the error.
(string) --
{'update': {'params': {'type': ['ClusterLogging']}, 'type': ['LoggingUpdate']}}
Updates an Amazon EKS cluster to the specified Kubernetes version. Your cluster continues to function during the update. The response output includes an update ID that you can use to track the status of your cluster update with the DescribeUpdate API operation.
Cluster updates are asynchronous, and they should finish within a few minutes. During an update, the cluster status moves to UPDATING (this status transition is eventually consistent). When the update is complete (either Failed or Successful ), the cluster status moves to Active .
See also: AWS API Documentation
Request Syntax
client.update_cluster_version(
name='string',
version='string',
clientRequestToken='string'
)
string
[REQUIRED]
The name of the Amazon EKS cluster to update.
string
[REQUIRED]
The desired Kubernetes version following a successful update.
string
Unique, case-sensitive identifier that you provide to ensure the idempotency of the request.
This field is autopopulated if not provided.
dict
Response Syntax
{
'update': {
'id': 'string',
'status': 'InProgress'|'Failed'|'Cancelled'|'Successful',
'type': 'VersionUpdate'|'EndpointAccessUpdate'|'LoggingUpdate',
'params': [
{
'type': 'Version'|'PlatformVersion'|'EndpointPrivateAccess'|'EndpointPublicAccess'|'ClusterLogging',
'value': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'errors': [
{
'errorCode': 'SubnetNotFound'|'SecurityGroupNotFound'|'EniLimitReached'|'IpNotAvailable'|'AccessDenied'|'OperationNotPermitted'|'VpcIdNotFound'|'Unknown',
'errorMessage': 'string',
'resourceIds': [
'string',
]
},
]
}
}
Response Structure
(dict) --
update (dict) --
The full description of the specified update
id (string) --
A UUID that is used to track the update.
status (string) --
The current status of the update.
type (string) --
The type of the update.
params (list) --
A key-value map that contains the parameters associated with the update.
(dict) --
An object representing the details of an update request.
type (string) --
The keys associated with an update request.
value (string) --
The value of the keys submitted as part of an update request.
createdAt (datetime) --
The Unix epoch timestamp in seconds for when the update was created.
errors (list) --
Any errors associated with a Failed update.
(dict) --
An object representing an error when an asynchronous operation fails.
errorCode (string) --
A brief description of the error.
SubnetNotFound : One of the subnets associated with the cluster could not be found.
SecurityGroupNotFound : One of the security groups associated with the cluster could not be found.
EniLimitReached : You have reached the elastic network interface limit for your account.
IpNotAvailable : A subnet associated with the cluster does not have any free IP addresses.
AccessDenied : You do not have permissions to perform the specified operation.
OperationNotPermitted : The service role associated with the cluster does not have the required access permissions for Amazon EKS.
VpcIdNotFound : The VPC associated with the cluster could not be found.
errorMessage (string) --
A more complete description of the error.
resourceIds (list) --
An optional field that contains the resource IDs associated with the error.
(string) --