2018/11/12 - AWS CodePipeline - 4 updated api methods
Changes Add support for cross-region pipeline with accompanying definitions as needed in the AWS CodePipeline API Guide.
{'pipeline': {'artifactStores': {'string': {'encryptionKey': {'id': 'string',
'type': 'KMS'},
'location': 'string',
'type': 'S3'}},
'stages': {'actions': {'region': 'string'}}}}
Creates a pipeline.
See also: AWS API Documentation
Request Syntax
client.create_pipeline(
pipeline={
'name': 'string',
'roleArn': 'string',
'artifactStore': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
},
'artifactStores': {
'string': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
}
},
'stages': [
{
'name': 'string',
'blockers': [
{
'name': 'string',
'type': 'Schedule'
},
],
'actions': [
{
'name': 'string',
'actionTypeId': {
'category': 'Source'|'Build'|'Deploy'|'Test'|'Invoke'|'Approval',
'owner': 'AWS'|'ThirdParty'|'Custom',
'provider': 'string',
'version': 'string'
},
'runOrder': 123,
'configuration': {
'string': 'string'
},
'outputArtifacts': [
{
'name': 'string'
},
],
'inputArtifacts': [
{
'name': 'string'
},
],
'roleArn': 'string',
'region': 'string'
},
]
},
],
'version': 123
}
)
dict
[REQUIRED]
Represents the structure of actions and stages to be performed in the pipeline.
name (string) -- [REQUIRED]
The name of the action to be performed.
roleArn (string) -- [REQUIRED]
The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.
artifactStore (dict) --
Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) -- [REQUIRED]
The type of the artifact store, such as S3.
location (string) -- [REQUIRED]
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) -- [REQUIRED]
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) -- [REQUIRED]
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
artifactStores (dict) --
A mapping of artifactStore objects and their corresponding regions. There must be an artifact store for the pipeline region and for each cross-region action within the pipeline. You can only use either artifactStore or artifactStores, not both.
If you create a cross-region action in your pipeline, you must use artifactStores.
(string) --
(dict) --
The Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) -- [REQUIRED]
The type of the artifact store, such as S3.
location (string) -- [REQUIRED]
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) -- [REQUIRED]
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) -- [REQUIRED]
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
stages (list) -- [REQUIRED]
The stage in which to perform the action.
(dict) --
Represents information about a stage and its definition.
name (string) -- [REQUIRED]
The name of the stage.
blockers (list) --
Reserved for future use.
(dict) --
Reserved for future use.
name (string) -- [REQUIRED]
Reserved for future use.
type (string) -- [REQUIRED]
Reserved for future use.
actions (list) -- [REQUIRED]
The actions included in a stage.
(dict) --
Represents information about an action declaration.
name (string) -- [REQUIRED]
The action declaration's name.
actionTypeId (dict) -- [REQUIRED]
The configuration information for the action type.
category (string) -- [REQUIRED]
A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the values below.
owner (string) -- [REQUIRED]
The creator of the action being called.
provider (string) -- [REQUIRED]
The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy.
version (string) -- [REQUIRED]
A string that describes the action version.
runOrder (integer) --
The order in which actions are run.
configuration (dict) --
The action declaration's configuration.
(string) --
(string) --
outputArtifacts (list) --
The name or ID of the result of the action declaration, such as a test or build artifact.
(dict) --
Represents information about the output of an action.
name (string) -- [REQUIRED]
The name of the output of an artifact, such as "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
Output artifact names must be unique within a pipeline.
inputArtifacts (list) --
The name or ID of the artifact consumed by the action, such as a test or build artifact.
(dict) --
Represents information about an artifact to be worked on, such as a test or build artifact.
name (string) -- [REQUIRED]
The name of the artifact to be worked on, for example, "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
roleArn (string) --
The ARN of the IAM service role that will perform the declared action. This is assumed through the roleArn for the pipeline.
region (string) --
The action declaration's AWS Region, such as us-east-1.
version (integer) --
The version number of the pipeline. A new pipeline always has a version number of 1. This number is automatically incremented when a pipeline is updated.
dict
Response Syntax
{
'pipeline': {
'name': 'string',
'roleArn': 'string',
'artifactStore': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
},
'artifactStores': {
'string': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
}
},
'stages': [
{
'name': 'string',
'blockers': [
{
'name': 'string',
'type': 'Schedule'
},
],
'actions': [
{
'name': 'string',
'actionTypeId': {
'category': 'Source'|'Build'|'Deploy'|'Test'|'Invoke'|'Approval',
'owner': 'AWS'|'ThirdParty'|'Custom',
'provider': 'string',
'version': 'string'
},
'runOrder': 123,
'configuration': {
'string': 'string'
},
'outputArtifacts': [
{
'name': 'string'
},
],
'inputArtifacts': [
{
'name': 'string'
},
],
'roleArn': 'string',
'region': 'string'
},
]
},
],
'version': 123
}
}
Response Structure
(dict) --
Represents the output of a CreatePipeline action.
pipeline (dict) --
Represents the structure of actions and stages to be performed in the pipeline.
name (string) --
The name of the action to be performed.
roleArn (string) --
The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.
artifactStore (dict) --
Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) --
The type of the artifact store, such as S3.
location (string) --
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) --
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) --
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
artifactStores (dict) --
A mapping of artifactStore objects and their corresponding regions. There must be an artifact store for the pipeline region and for each cross-region action within the pipeline. You can only use either artifactStore or artifactStores, not both.
If you create a cross-region action in your pipeline, you must use artifactStores.
(string) --
(dict) --
The Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) --
The type of the artifact store, such as S3.
location (string) --
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) --
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) --
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
stages (list) --
The stage in which to perform the action.
(dict) --
Represents information about a stage and its definition.
name (string) --
The name of the stage.
blockers (list) --
Reserved for future use.
(dict) --
Reserved for future use.
name (string) --
Reserved for future use.
type (string) --
Reserved for future use.
actions (list) --
The actions included in a stage.
(dict) --
Represents information about an action declaration.
name (string) --
The action declaration's name.
actionTypeId (dict) --
The configuration information for the action type.
category (string) --
A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the values below.
owner (string) --
The creator of the action being called.
provider (string) --
The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy.
version (string) --
A string that describes the action version.
runOrder (integer) --
The order in which actions are run.
configuration (dict) --
The action declaration's configuration.
(string) --
(string) --
outputArtifacts (list) --
The name or ID of the result of the action declaration, such as a test or build artifact.
(dict) --
Represents information about the output of an action.
name (string) --
The name of the output of an artifact, such as "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
Output artifact names must be unique within a pipeline.
inputArtifacts (list) --
The name or ID of the artifact consumed by the action, such as a test or build artifact.
(dict) --
Represents information about an artifact to be worked on, such as a test or build artifact.
name (string) --
The name of the artifact to be worked on, for example, "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
roleArn (string) --
The ARN of the IAM service role that will perform the declared action. This is assumed through the roleArn for the pipeline.
region (string) --
The action declaration's AWS Region, such as us-east-1.
version (integer) --
The version number of the pipeline. A new pipeline always has a version number of 1. This number is automatically incremented when a pipeline is updated.
{'pipeline': {'artifactStores': {'string': {'encryptionKey': {'id': 'string',
'type': 'KMS'},
'location': 'string',
'type': 'S3'}},
'stages': {'actions': {'region': 'string'}}}}
Returns the metadata, structure, stages, and actions of a pipeline. Can be used to return the entire structure of a pipeline in JSON format, which can then be modified and used to update the pipeline structure with UpdatePipeline .
See also: AWS API Documentation
Request Syntax
client.get_pipeline(
name='string',
version=123
)
string
[REQUIRED]
The name of the pipeline for which you want to get information. Pipeline names must be unique under an Amazon Web Services (AWS) user account.
integer
The version number of the pipeline. If you do not specify a version, defaults to the most current version.
dict
Response Syntax
{
'pipeline': {
'name': 'string',
'roleArn': 'string',
'artifactStore': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
},
'artifactStores': {
'string': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
}
},
'stages': [
{
'name': 'string',
'blockers': [
{
'name': 'string',
'type': 'Schedule'
},
],
'actions': [
{
'name': 'string',
'actionTypeId': {
'category': 'Source'|'Build'|'Deploy'|'Test'|'Invoke'|'Approval',
'owner': 'AWS'|'ThirdParty'|'Custom',
'provider': 'string',
'version': 'string'
},
'runOrder': 123,
'configuration': {
'string': 'string'
},
'outputArtifacts': [
{
'name': 'string'
},
],
'inputArtifacts': [
{
'name': 'string'
},
],
'roleArn': 'string',
'region': 'string'
},
]
},
],
'version': 123
},
'metadata': {
'pipelineArn': 'string',
'created': datetime(2015, 1, 1),
'updated': datetime(2015, 1, 1)
}
}
Response Structure
(dict) --
Represents the output of a GetPipeline action.
pipeline (dict) --
Represents the structure of actions and stages to be performed in the pipeline.
name (string) --
The name of the action to be performed.
roleArn (string) --
The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.
artifactStore (dict) --
Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) --
The type of the artifact store, such as S3.
location (string) --
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) --
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) --
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
artifactStores (dict) --
A mapping of artifactStore objects and their corresponding regions. There must be an artifact store for the pipeline region and for each cross-region action within the pipeline. You can only use either artifactStore or artifactStores, not both.
If you create a cross-region action in your pipeline, you must use artifactStores.
(string) --
(dict) --
The Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) --
The type of the artifact store, such as S3.
location (string) --
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) --
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) --
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
stages (list) --
The stage in which to perform the action.
(dict) --
Represents information about a stage and its definition.
name (string) --
The name of the stage.
blockers (list) --
Reserved for future use.
(dict) --
Reserved for future use.
name (string) --
Reserved for future use.
type (string) --
Reserved for future use.
actions (list) --
The actions included in a stage.
(dict) --
Represents information about an action declaration.
name (string) --
The action declaration's name.
actionTypeId (dict) --
The configuration information for the action type.
category (string) --
A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the values below.
owner (string) --
The creator of the action being called.
provider (string) --
The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy.
version (string) --
A string that describes the action version.
runOrder (integer) --
The order in which actions are run.
configuration (dict) --
The action declaration's configuration.
(string) --
(string) --
outputArtifacts (list) --
The name or ID of the result of the action declaration, such as a test or build artifact.
(dict) --
Represents information about the output of an action.
name (string) --
The name of the output of an artifact, such as "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
Output artifact names must be unique within a pipeline.
inputArtifacts (list) --
The name or ID of the artifact consumed by the action, such as a test or build artifact.
(dict) --
Represents information about an artifact to be worked on, such as a test or build artifact.
name (string) --
The name of the artifact to be worked on, for example, "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
roleArn (string) --
The ARN of the IAM service role that will perform the declared action. This is assumed through the roleArn for the pipeline.
region (string) --
The action declaration's AWS Region, such as us-east-1.
version (integer) --
The version number of the pipeline. A new pipeline always has a version number of 1. This number is automatically incremented when a pipeline is updated.
metadata (dict) --
Represents the pipeline metadata information returned as part of the output of a GetPipeline action.
pipelineArn (string) --
The Amazon Resource Name (ARN) of the pipeline.
created (datetime) --
The date and time the pipeline was created, in timestamp format.
updated (datetime) --
The date and time the pipeline was last updated, in timestamp format.
{'clientRequestToken': 'string'}
Starts the specified pipeline. Specifically, it begins processing the latest commit to the source location specified as part of the pipeline.
See also: AWS API Documentation
Request Syntax
client.start_pipeline_execution(
name='string',
clientRequestToken='string'
)
string
[REQUIRED]
The name of the pipeline to start.
string
The system-generated unique ID used to identify a unique execution request.
This field is autopopulated if not provided.
dict
Response Syntax
{
'pipelineExecutionId': 'string'
}
Response Structure
(dict) --
Represents the output of a StartPipelineExecution action.
pipelineExecutionId (string) --
The unique system-generated ID of the pipeline execution that was started.
{'pipeline': {'artifactStores': {'string': {'encryptionKey': {'id': 'string',
'type': 'KMS'},
'location': 'string',
'type': 'S3'}},
'stages': {'actions': {'region': 'string'}}}}
Updates a specified pipeline with edits or changes to its structure. Use a JSON file with the pipeline structure in conjunction with UpdatePipeline to provide the full structure of the pipeline. Updating the pipeline increases the version number of the pipeline by 1.
See also: AWS API Documentation
Request Syntax
client.update_pipeline(
pipeline={
'name': 'string',
'roleArn': 'string',
'artifactStore': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
},
'artifactStores': {
'string': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
}
},
'stages': [
{
'name': 'string',
'blockers': [
{
'name': 'string',
'type': 'Schedule'
},
],
'actions': [
{
'name': 'string',
'actionTypeId': {
'category': 'Source'|'Build'|'Deploy'|'Test'|'Invoke'|'Approval',
'owner': 'AWS'|'ThirdParty'|'Custom',
'provider': 'string',
'version': 'string'
},
'runOrder': 123,
'configuration': {
'string': 'string'
},
'outputArtifacts': [
{
'name': 'string'
},
],
'inputArtifacts': [
{
'name': 'string'
},
],
'roleArn': 'string',
'region': 'string'
},
]
},
],
'version': 123
}
)
dict
[REQUIRED]
The name of the pipeline to be updated.
name (string) -- [REQUIRED]
The name of the action to be performed.
roleArn (string) -- [REQUIRED]
The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.
artifactStore (dict) --
Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) -- [REQUIRED]
The type of the artifact store, such as S3.
location (string) -- [REQUIRED]
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) -- [REQUIRED]
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) -- [REQUIRED]
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
artifactStores (dict) --
A mapping of artifactStore objects and their corresponding regions. There must be an artifact store for the pipeline region and for each cross-region action within the pipeline. You can only use either artifactStore or artifactStores, not both.
If you create a cross-region action in your pipeline, you must use artifactStores.
(string) --
(dict) --
The Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) -- [REQUIRED]
The type of the artifact store, such as S3.
location (string) -- [REQUIRED]
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) -- [REQUIRED]
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) -- [REQUIRED]
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
stages (list) -- [REQUIRED]
The stage in which to perform the action.
(dict) --
Represents information about a stage and its definition.
name (string) -- [REQUIRED]
The name of the stage.
blockers (list) --
Reserved for future use.
(dict) --
Reserved for future use.
name (string) -- [REQUIRED]
Reserved for future use.
type (string) -- [REQUIRED]
Reserved for future use.
actions (list) -- [REQUIRED]
The actions included in a stage.
(dict) --
Represents information about an action declaration.
name (string) -- [REQUIRED]
The action declaration's name.
actionTypeId (dict) -- [REQUIRED]
The configuration information for the action type.
category (string) -- [REQUIRED]
A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the values below.
owner (string) -- [REQUIRED]
The creator of the action being called.
provider (string) -- [REQUIRED]
The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy.
version (string) -- [REQUIRED]
A string that describes the action version.
runOrder (integer) --
The order in which actions are run.
configuration (dict) --
The action declaration's configuration.
(string) --
(string) --
outputArtifacts (list) --
The name or ID of the result of the action declaration, such as a test or build artifact.
(dict) --
Represents information about the output of an action.
name (string) -- [REQUIRED]
The name of the output of an artifact, such as "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
Output artifact names must be unique within a pipeline.
inputArtifacts (list) --
The name or ID of the artifact consumed by the action, such as a test or build artifact.
(dict) --
Represents information about an artifact to be worked on, such as a test or build artifact.
name (string) -- [REQUIRED]
The name of the artifact to be worked on, for example, "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
roleArn (string) --
The ARN of the IAM service role that will perform the declared action. This is assumed through the roleArn for the pipeline.
region (string) --
The action declaration's AWS Region, such as us-east-1.
version (integer) --
The version number of the pipeline. A new pipeline always has a version number of 1. This number is automatically incremented when a pipeline is updated.
dict
Response Syntax
{
'pipeline': {
'name': 'string',
'roleArn': 'string',
'artifactStore': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
},
'artifactStores': {
'string': {
'type': 'S3',
'location': 'string',
'encryptionKey': {
'id': 'string',
'type': 'KMS'
}
}
},
'stages': [
{
'name': 'string',
'blockers': [
{
'name': 'string',
'type': 'Schedule'
},
],
'actions': [
{
'name': 'string',
'actionTypeId': {
'category': 'Source'|'Build'|'Deploy'|'Test'|'Invoke'|'Approval',
'owner': 'AWS'|'ThirdParty'|'Custom',
'provider': 'string',
'version': 'string'
},
'runOrder': 123,
'configuration': {
'string': 'string'
},
'outputArtifacts': [
{
'name': 'string'
},
],
'inputArtifacts': [
{
'name': 'string'
},
],
'roleArn': 'string',
'region': 'string'
},
]
},
],
'version': 123
}
}
Response Structure
(dict) --
Represents the output of an UpdatePipeline action.
pipeline (dict) --
The structure of the updated pipeline.
name (string) --
The name of the action to be performed.
roleArn (string) --
The Amazon Resource Name (ARN) for AWS CodePipeline to use to either perform actions with no actionRoleArn, or to use to assume roles for actions with an actionRoleArn.
artifactStore (dict) --
Represents information about the Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) --
The type of the artifact store, such as S3.
location (string) --
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) --
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) --
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
artifactStores (dict) --
A mapping of artifactStore objects and their corresponding regions. There must be an artifact store for the pipeline region and for each cross-region action within the pipeline. You can only use either artifactStore or artifactStores, not both.
If you create a cross-region action in your pipeline, you must use artifactStores.
(string) --
(dict) --
The Amazon S3 bucket where artifacts are stored for the pipeline.
type (string) --
The type of the artifact store, such as S3.
location (string) --
The Amazon S3 bucket used for storing the artifacts for a pipeline. You can specify the name of an S3 bucket but not a folder within the bucket. A folder to contain the pipeline artifacts is created for you based on the name of the pipeline. You can use any Amazon S3 bucket in the same AWS Region as the pipeline to store your pipeline artifacts.
encryptionKey (dict) --
The encryption key used to encrypt the data in the artifact store, such as an AWS Key Management Service (AWS KMS) key. If this is undefined, the default key for Amazon S3 is used.
id (string) --
The ID used to identify the key. For an AWS KMS key, this is the key ID or key ARN.
type (string) --
The type of encryption key, such as an AWS Key Management Service (AWS KMS) key. When creating or updating a pipeline, the value must be set to 'KMS'.
stages (list) --
The stage in which to perform the action.
(dict) --
Represents information about a stage and its definition.
name (string) --
The name of the stage.
blockers (list) --
Reserved for future use.
(dict) --
Reserved for future use.
name (string) --
Reserved for future use.
type (string) --
Reserved for future use.
actions (list) --
The actions included in a stage.
(dict) --
Represents information about an action declaration.
name (string) --
The action declaration's name.
actionTypeId (dict) --
The configuration information for the action type.
category (string) --
A category defines what kind of action can be taken in the stage, and constrains the provider type for the action. Valid categories are limited to one of the values below.
owner (string) --
The creator of the action being called.
provider (string) --
The provider of the service being called by the action. Valid providers are determined by the action category. For example, an action in the Deploy category type might have a provider of AWS CodeDeploy, which would be specified as CodeDeploy.
version (string) --
A string that describes the action version.
runOrder (integer) --
The order in which actions are run.
configuration (dict) --
The action declaration's configuration.
(string) --
(string) --
outputArtifacts (list) --
The name or ID of the result of the action declaration, such as a test or build artifact.
(dict) --
Represents information about the output of an action.
name (string) --
The name of the output of an artifact, such as "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
Output artifact names must be unique within a pipeline.
inputArtifacts (list) --
The name or ID of the artifact consumed by the action, such as a test or build artifact.
(dict) --
Represents information about an artifact to be worked on, such as a test or build artifact.
name (string) --
The name of the artifact to be worked on, for example, "My App".
The input artifact of an action must exactly match the output artifact declared in a preceding action, but the input artifact does not have to be the next action in strict sequence from the action that provided the output artifact. Actions in parallel can declare different output artifacts, which are in turn consumed by different following actions.
roleArn (string) --
The ARN of the IAM service role that will perform the declared action. This is assumed through the roleArn for the pipeline.
region (string) --
The action declaration's AWS Region, such as us-east-1.
version (integer) --
The version number of the pipeline. A new pipeline always has a version number of 1. This number is automatically incremented when a pipeline is updated.