AWS API Changes

2017/08/10 - AWS CodeBuild - 7 updated api methods

Changes Supporting Bitbucket as source type in AWS CodeBuild.

BatchGetBuilds (updated)

Link ¶
Changes (response)

{'builds': {'source': {'type': ['BITBUCKET']}}}

Gets information about builds.

See also: AWS API Documentation

Request Syntax

client.batch_get_builds(
    ids=[
        'string',
    ]
)

type ids

list

param ids

[REQUIRED]

The IDs of the builds.

(string) --

rtype

dict

returns

Response Syntax

{
    'builds': [
        {
            'id': 'string',
            'arn': 'string',
            'startTime': datetime(2015, 1, 1),
            'endTime': datetime(2015, 1, 1),
            'currentPhase': 'string',
            'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
            'sourceVersion': 'string',
            'projectName': 'string',
            'phases': [
                {
                    'phaseType': 'SUBMITTED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
                    'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
                    'startTime': datetime(2015, 1, 1),
                    'endTime': datetime(2015, 1, 1),
                    'durationInSeconds': 123,
                    'contexts': [
                        {
                            'statusCode': 'string',
                            'message': 'string'
                        },
                    ]
                },
            ],
            'source': {
                'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET',
                'location': 'string',
                'buildspec': 'string',
                'auth': {
                    'type': 'OAUTH',
                    'resource': 'string'
                }
            },
            'artifacts': {
                'location': 'string',
                'sha256sum': 'string',
                'md5sum': 'string'
            },
            'environment': {
                'type': 'LINUX_CONTAINER',
                'image': 'string',
                'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE',
                'environmentVariables': [
                    {
                        'name': 'string',
                        'value': 'string'
                    },
                ],
                'privilegedMode': True|False
            },
            'logs': {
                'groupName': 'string',
                'streamName': 'string',
                'deepLink': 'string'
            },
            'timeoutInMinutes': 123,
            'buildComplete': True|False,
            'initiator': 'string'
        },
    ],
    'buildsNotFound': [
        'string',
    ]
}

Response Structure

(dict) --
- builds (list) --
  
  Information about the requested builds.
  - (dict) --
    
    Information about a build.
    - id (string) --
      
      The unique ID for the build.
    - arn (string) --
      
      The Amazon Resource Name (ARN) of the build.
    - startTime (datetime) --
      
      When the build process started, expressed in Unix time format.
    - endTime (datetime) --
      
      When the build process ended, expressed in Unix time format.
    - currentPhase (string) --
      
      The current build phase.
    - buildStatus (string) --
      
      The current status of the build. Valid values include:
      - FAILED : The build failed.
      - FAULT : The build faulted.
      - IN_PROGRESS : The build is still in progress.
      - STOPPED : The build stopped.
      - SUCCEEDED : The build succeeded.
      - TIMED_OUT : The build timed out.
    - sourceVersion (string) --
      
      Any version identifier for the version of the source code to be built.
    - projectName (string) --
      
      The name of the build project.
    - phases (list) --
      
      Information about all previous build phases that are completed and information about any current build phase that is not yet complete.
      - (dict) --
        
        Information about a stage for a build.
        
        phaseType (string) --
        
        The name of the build phase. Valid values include:
        
        BUILD : Core build activities typically occur in this build phase.
        
        COMPLETED : The build has been completed.
        
        DOWNLOAD_SOURCE : Source code is being downloaded in this build phase.
        
        FINALIZING : The build process is completing in this build phase.
        
        INSTALL : Installation activities typically occur in this build phase.
        
        POST_BUILD : Post-build activities typically occur in this build phase.
        
        PRE_BUILD : Pre-build activities typically occur in this build phase.
        
        PROVISIONING : The build environment is being set up.
        
        SUBMITTED : The build has been submitted.
        
        UPLOAD_ARTIFACTS : Build output artifacts are being uploaded to the output location.
        
        phaseStatus (string) --
        
        The current status of the build phase. Valid values include:
        
        FAILED : The build phase failed.
        
        FAULT : The build phase faulted.
        
        IN_PROGRESS : The build phase is still in progress.
        
        STOPPED : The build phase stopped.
        
        SUCCEEDED : The build phase succeeded.
        
        TIMED_OUT : The build phase timed out.
        
        startTime (datetime) --
        
        When the build phase started, expressed in Unix time format.
        
        endTime (datetime) --
        
        When the build phase ended, expressed in Unix time format.
        
        durationInSeconds (integer) --
        
        How long, in seconds, between the starting and ending times of the build's phase.
        
        contexts (list) --
        
        Additional information about a build phase, especially to help troubleshoot a failed build.
        
        (dict) --
        
        Additional information about a build phase that has an error. You can use this information to help troubleshoot a failed build.
        
        statusCode (string) --
        
        The status code for the context of the build phase.
        
        message (string) --
        
        An explanation of the build phase's context. This explanation might include a command ID and an exit code.
    - source (dict) --
      
      Information about the source code to be built.
      - type (string) --
        
        The type of repository that contains the source code to be built. Valid values include:
        
        CODECOMMIT : The source code is in an AWS CodeCommit repository.
        
        CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
        
        GITHUB : The source code is in a GitHub repository.
        
        S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
      - location (string) --
        
        Information about the location of the source code to be built. Valid values include:
        
        For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline will ignore it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
        
        For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the build spec (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
        
        For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, the path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` )
        
        For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the build spec. Also, you must connect your AWS account to your GitHub account. To do this, use the AWS CodeBuild console to begin creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page that displays, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to. Then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project, and you may then leave the AWS CodeBuild console.) To instruct AWS CodeBuild to then use this connection, in the source object, set the auth object's type value to OAUTH .
      - buildspec (string) --
        
        The build spec declaration to use for the builds in this build project.
        
        If this value is not specified, a build spec must be included along with the source code to be built.
      - auth (dict) --
        
        Information about the authorization settings for AWS CodeBuild to access the source code to be built.
        
        This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly (unless the build project's source type value is GITHUB ).
        
        type (string) --
        
        The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
        
        resource (string) --
        
        The resource value that applies to the specified authorization type.
    - artifacts (dict) --
      
      Information about the output artifacts for the build.
      - location (string) --
        
        Information about the location of the build artifacts.
      - sha256sum (string) --
        
        The SHA-256 hash of the build artifact.
        
        You can use this hash along with a checksum tool to confirm both file integrity and authenticity.
        
        Note
        
        This value is available only if the build project's packaging value is set to ZIP .
      - md5sum (string) --
        
        The MD5 hash of the build artifact.
        
        You can use this hash along with a checksum tool to confirm both file integrity and authenticity.
        
        Note
        
        This value is available only if the build project's packaging value is set to ZIP .
    - environment (dict) --
      
      Information about the build environment for this build.
      - type (string) --
        
        The type of build environment to use for related builds.
      - image (string) --
        
        The ID of the Docker image to use for this build project.
      - computeType (string) --
        
        Information about the compute resources the build project will use. Available values include:
        
        BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
        
        BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
        
        BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for builds.
      - environmentVariables (list) --
        
        A set of environment variables to make available to builds for this build project.
        
        (dict) --
        
        Information about an environment variable for a build project or a build.
        
        name (string) --
        
        The name or key of the environment variable.
        
        value (string) --
        
        The value of the environment variable.
        
        Warning
        
        We strongly discourage using environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. Environment variables can be displayed in plain text using tools such as the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI).
      - privilegedMode (boolean) --
        
        If set to true, enables running the Docker daemon inside a Docker container; otherwise, false or not specified (the default). This value must be set to true only if this build project will be used to build Docker images, and the specified build environment image is not one provided by AWS CodeBuild with Docker support. Otherwise, all associated builds that attempt to interact with the Docker daemon will fail. Note that you must also start the Docker daemon so that your builds can interact with it as needed. One way to do this is to initialize the Docker daemon in the install phase of your build spec by running the following build commands. (Do not run the following build commands if the specified build environment image is provided by AWS CodeBuild with Docker support.)
        
        - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=vfs& - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
    - logs (dict) --
      
      Information about the build's logs in Amazon CloudWatch Logs.
      - groupName (string) --
        
        The name of the Amazon CloudWatch Logs group for the build logs.
      - streamName (string) --
        
        The name of the Amazon CloudWatch Logs stream for the build logs.
      - deepLink (string) --
        
        The URL to an individual build log in Amazon CloudWatch Logs.
    - timeoutInMinutes (integer) --
      
      How long, in minutes, for AWS CodeBuild to wait before timing out this build if it does not get marked as completed.
    - buildComplete (boolean) --
      
      Whether the build has finished. True if completed; otherwise, false.
    - initiator (string) --
      
      The entity that started the build. Valid values include:
      - If AWS CodePipeline started the build, the pipeline's name (for example, codepipeline/my-demo-pipeline ).
      - If an AWS Identity and Access Management (IAM) user started the build, the user's name (for example MyUserName ).
      - If the Jenkins plugin for AWS CodeBuild started the build, the string CodeBuild-Jenkins-Plugin .
- buildsNotFound (list) --
  
  The IDs of builds for which information could not be found.
  - (string) --

BatchGetProjects (updated)

Link ¶
Changes (response)

{'projects': {'source': {'type': ['BITBUCKET']}}}

Gets information about build projects.

See also: AWS API Documentation

Request Syntax

client.batch_get_projects(
    names=[
        'string',
    ]
)

type names

list

param names

[REQUIRED]

The names of the build projects.

(string) --

rtype

dict

returns

Response Syntax

{
    'projects': [
        {
            'name': 'string',
            'arn': 'string',
            'description': 'string',
            'source': {
                'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET',
                'location': 'string',
                'buildspec': 'string',
                'auth': {
                    'type': 'OAUTH',
                    'resource': 'string'
                }
            },
            'artifacts': {
                'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
                'location': 'string',
                'path': 'string',
                'namespaceType': 'NONE'|'BUILD_ID',
                'name': 'string',
                'packaging': 'NONE'|'ZIP'
            },
            'environment': {
                'type': 'LINUX_CONTAINER',
                'image': 'string',
                'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE',
                'environmentVariables': [
                    {
                        'name': 'string',
                        'value': 'string'
                    },
                ],
                'privilegedMode': True|False
            },
            'serviceRole': 'string',
            'timeoutInMinutes': 123,
            'encryptionKey': 'string',
            'tags': [
                {
                    'key': 'string',
                    'value': 'string'
                },
            ],
            'created': datetime(2015, 1, 1),
            'lastModified': datetime(2015, 1, 1)
        },
    ],
    'projectsNotFound': [
        'string',
    ]
}

Response Structure

(dict) --
- projects (list) --
  
  Information about the requested build projects.
  - (dict) --
    
    Information about a build project.
    - name (string) --
      
      The name of the build project.
    - arn (string) --
      
      The Amazon Resource Name (ARN) of the build project.
    - description (string) --
      
      A description that makes the build project easy to identify.
    - source (dict) --
      
      Information about the build input source code for this build project.
      - type (string) --
        
        The type of repository that contains the source code to be built. Valid values include:
        
        CODECOMMIT : The source code is in an AWS CodeCommit repository.
        
        CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
        
        GITHUB : The source code is in a GitHub repository.
        
        S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
      - location (string) --
        
        Information about the location of the source code to be built. Valid values include:
        
        For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline will ignore it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
        
        For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the build spec (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
        
        For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, the path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` )
        
        For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the build spec. Also, you must connect your AWS account to your GitHub account. To do this, use the AWS CodeBuild console to begin creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page that displays, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to. Then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project, and you may then leave the AWS CodeBuild console.) To instruct AWS CodeBuild to then use this connection, in the source object, set the auth object's type value to OAUTH .
      - buildspec (string) --
        
        The build spec declaration to use for the builds in this build project.
        
        If this value is not specified, a build spec must be included along with the source code to be built.
      - auth (dict) --
        
        Information about the authorization settings for AWS CodeBuild to access the source code to be built.
        
        This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly (unless the build project's source type value is GITHUB ).
        
        type (string) --
        
        The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
        
        resource (string) --
        
        The resource value that applies to the specified authorization type.
    - artifacts (dict) --
      
      Information about the build output artifacts for the build project.
      - type (string) --
        
        The type of build output artifact. Valid values include:
        
        CODEPIPELINE : The build project will have build output generated through AWS CodePipeline.
        
        NO_ARTIFACTS : The build project will not produce any build output.
        
        S3 : The build project will store build output in Amazon Simple Storage Service (Amazon S3).
      - location (string) --
        
        Information about the build output artifact location, as follows:
        
        If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
        
        If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
        
        If type is set to S3 , this is the name of the output bucket.
      - path (string) --
        
        Along with namespaceType and name , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
        
        If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        
        If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
        
        If type is set to S3 , this is the path to the output artifact. If path is not specified, then path will not be used.
        
        For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , then the output artifact would be stored in the output bucket at MyArtifacts/MyArtifact.zip .
      - namespaceType (string) --
        
        Along with path and name , the pattern that AWS CodeBuild will use to determine the name and location to store the output artifact, as follows:
        
        If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        
        If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
        
        If type is set to S3 , then valid values include:
        
        BUILD_ID : Include the build ID in the location of the build output artifact.
        
        NONE : Do not include the build ID. This is the default if namespaceType is not specified.
        
        For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
      - name (string) --
        
        Along with path and namespaceType , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
        
        If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
        
        If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
        
        If type is set to S3 , this is the name of the output artifact object.
        
        For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
      - packaging (string) --
        
        The type of build output artifact to create, as follows:
        
        If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
        
        If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
        
        If type is set to S3 , valid values include:
        
        NONE : AWS CodeBuild will create in the output bucket a folder containing the build output. This is the default if packaging is not specified.
        
        ZIP : AWS CodeBuild will create in the output bucket a ZIP file containing the build output.
    - environment (dict) --
      
      Information about the build environment for this build project.
      - type (string) --
        
        The type of build environment to use for related builds.
      - image (string) --
        
        The ID of the Docker image to use for this build project.
      - computeType (string) --
        
        Information about the compute resources the build project will use. Available values include:
        
        BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
        
        BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
        
        BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for builds.
      - environmentVariables (list) --
        
        A set of environment variables to make available to builds for this build project.
        
        (dict) --
        
        Information about an environment variable for a build project or a build.
        
        name (string) --
        
        The name or key of the environment variable.
        
        value (string) --
        
        The value of the environment variable.
        
        Warning
        
        We strongly discourage using environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. Environment variables can be displayed in plain text using tools such as the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI).
      - privilegedMode (boolean) --
        
        If set to true, enables running the Docker daemon inside a Docker container; otherwise, false or not specified (the default). This value must be set to true only if this build project will be used to build Docker images, and the specified build environment image is not one provided by AWS CodeBuild with Docker support. Otherwise, all associated builds that attempt to interact with the Docker daemon will fail. Note that you must also start the Docker daemon so that your builds can interact with it as needed. One way to do this is to initialize the Docker daemon in the install phase of your build spec by running the following build commands. (Do not run the following build commands if the specified build environment image is provided by AWS CodeBuild with Docker support.)
        
        - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=vfs& - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
    - serviceRole (string) --
      
      The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
    - timeoutInMinutes (integer) --
      
      How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed. The default is 60 minutes.
    - encryptionKey (string) --
      
      The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
      
      This is expressed either as the CMK's Amazon Resource Name (ARN) or, if specified, the CMK's alias (using the format ``alias/alias-name `` ).
    - tags (list) --
      
      The tags for this build project.
      
      These tags are available for use by AWS services that support AWS CodeBuild build project tags.
      - (dict) --
        
        A tag, consisting of a key and a value.
        
        This tag is available for use by AWS services that support tags in AWS CodeBuild.
        
        key (string) --
        
        The tag's key.
        
        value (string) --
        
        The tag's value.
    - created (datetime) --
      
      When the build project was created, expressed in Unix time format.
    - lastModified (datetime) --
      
      When the build project's settings were last modified, expressed in Unix time format.
- projectsNotFound (list) --
  
  The names of build projects for which information could not be found.
  - (string) --

CreateProject (updated)

Link ¶
Changes (request, response)
Request

{'source': {'type': ['BITBUCKET']}}

Response

{'project': {'source': {'type': ['BITBUCKET']}}}

Creates a build project.

See also: AWS API Documentation

Request Syntax

client.create_project(
    name='string',
    description='string',
    source={
        'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET',
        'location': 'string',
        'buildspec': 'string',
        'auth': {
            'type': 'OAUTH',
            'resource': 'string'
        }
    },
    artifacts={
        'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
        'location': 'string',
        'path': 'string',
        'namespaceType': 'NONE'|'BUILD_ID',
        'name': 'string',
        'packaging': 'NONE'|'ZIP'
    },
    environment={
        'type': 'LINUX_CONTAINER',
        'image': 'string',
        'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE',
        'environmentVariables': [
            {
                'name': 'string',
                'value': 'string'
            },
        ],
        'privilegedMode': True|False
    },
    serviceRole='string',
    timeoutInMinutes=123,
    encryptionKey='string',
    tags=[
        {
            'key': 'string',
            'value': 'string'
        },
    ]
)

type name

string

param name

[REQUIRED]

The name of the build project.

type description

string

param description

A description that makes the build project easy to identify.

type source

dict

param source

[REQUIRED]

Information about the build input source code for the build project.

type (string) -- [REQUIRED]

The type of repository that contains the source code to be built. Valid values include:
- CODECOMMIT : The source code is in an AWS CodeCommit repository.
- CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
- GITHUB : The source code is in a GitHub repository.
- S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
location (string) --

Information about the location of the source code to be built. Valid values include:
- For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline will ignore it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
- For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the build spec (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
- For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, the path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` )
- For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the build spec. Also, you must connect your AWS account to your GitHub account. To do this, use the AWS CodeBuild console to begin creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page that displays, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to. Then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project, and you may then leave the AWS CodeBuild console.) To instruct AWS CodeBuild to then use this connection, in the source object, set the auth object's type value to OAUTH .
buildspec (string) --

The build spec declaration to use for the builds in this build project.

If this value is not specified, a build spec must be included along with the source code to be built.
auth (dict) --

Information about the authorization settings for AWS CodeBuild to access the source code to be built.

This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly (unless the build project's source type value is GITHUB ).
- type (string) -- [REQUIRED]
  
  The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
- resource (string) --
  
  The resource value that applies to the specified authorization type.

type artifacts

dict

param artifacts

[REQUIRED]

Information about the build output artifacts for the build project.

type (string) -- [REQUIRED]

The type of build output artifact. Valid values include:
- CODEPIPELINE : The build project will have build output generated through AWS CodePipeline.
- NO_ARTIFACTS : The build project will not produce any build output.
- S3 : The build project will store build output in Amazon Simple Storage Service (Amazon S3).
location (string) --

Information about the build output artifact location, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , this is the name of the output bucket.
path (string) --

Along with namespaceType and name , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , this is the path to the output artifact. If path is not specified, then path will not be used.
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , then the output artifact would be stored in the output bucket at MyArtifacts/MyArtifact.zip .
namespaceType (string) --

Along with path and name , the pattern that AWS CodeBuild will use to determine the name and location to store the output artifact, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , then valid values include:
  - BUILD_ID : Include the build ID in the location of the build output artifact.
  - NONE : Do not include the build ID. This is the default if namespaceType is not specified.
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
name (string) --

Along with path and namespaceType , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , this is the name of the output artifact object.
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
packaging (string) --

The type of build output artifact to create, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , valid values include:
  - NONE : AWS CodeBuild will create in the output bucket a folder containing the build output. This is the default if packaging is not specified.
  - ZIP : AWS CodeBuild will create in the output bucket a ZIP file containing the build output.

type environment

dict

param environment

[REQUIRED]

Information about the build environment for the build project.

type (string) -- [REQUIRED]

The type of build environment to use for related builds.
image (string) -- [REQUIRED]

The ID of the Docker image to use for this build project.
computeType (string) -- [REQUIRED]

Information about the compute resources the build project will use. Available values include:
- BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
- BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
- BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for builds.
environmentVariables (list) --

A set of environment variables to make available to builds for this build project.
- (dict) --
  
  Information about an environment variable for a build project or a build.
  - name (string) -- [REQUIRED]
    
    The name or key of the environment variable.
  - value (string) -- [REQUIRED]
    
    The value of the environment variable.
    
    Warning
    
    We strongly discourage using environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. Environment variables can be displayed in plain text using tools such as the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI).
privilegedMode (boolean) --

If set to true, enables running the Docker daemon inside a Docker container; otherwise, false or not specified (the default). This value must be set to true only if this build project will be used to build Docker images, and the specified build environment image is not one provided by AWS CodeBuild with Docker support. Otherwise, all associated builds that attempt to interact with the Docker daemon will fail. Note that you must also start the Docker daemon so that your builds can interact with it as needed. One way to do this is to initialize the Docker daemon in the install phase of your build spec by running the following build commands. (Do not run the following build commands if the specified build environment image is provided by AWS CodeBuild with Docker support.)

- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=vfs& - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

type serviceRole

string

param serviceRole

The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.

type timeoutInMinutes

integer

param timeoutInMinutes

How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait until timing out any build that has not been marked as completed. The default is 60 minutes.

type encryptionKey

string

param encryptionKey

The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

You can specify either the CMK's Amazon Resource Name (ARN) or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

type tags

list

param tags

A set of tags for this build project.

These tags are available for use by AWS services that support AWS CodeBuild build project tags.

(dict) --

A tag, consisting of a key and a value.

This tag is available for use by AWS services that support tags in AWS CodeBuild.
- key (string) --
  
  The tag's key.
- value (string) --
  
  The tag's value.

rtype

dict

returns

Response Syntax

{
    'project': {
        'name': 'string',
        'arn': 'string',
        'description': 'string',
        'source': {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET',
            'location': 'string',
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            }
        },
        'artifacts': {
            'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
            'location': 'string',
            'path': 'string',
            'namespaceType': 'NONE'|'BUILD_ID',
            'name': 'string',
            'packaging': 'NONE'|'ZIP'
        },
        'environment': {
            'type': 'LINUX_CONTAINER',
            'image': 'string',
            'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE',
            'environmentVariables': [
                {
                    'name': 'string',
                    'value': 'string'
                },
            ],
            'privilegedMode': True|False
        },
        'serviceRole': 'string',
        'timeoutInMinutes': 123,
        'encryptionKey': 'string',
        'tags': [
            {
                'key': 'string',
                'value': 'string'
            },
        ],
        'created': datetime(2015, 1, 1),
        'lastModified': datetime(2015, 1, 1)
    }
}

Response Structure

(dict) --
- project (dict) --
  
  Information about the build project that was created.
  - name (string) --
    
    The name of the build project.
  - arn (string) --
    
    The Amazon Resource Name (ARN) of the build project.
  - description (string) --
    
    A description that makes the build project easy to identify.
  - source (dict) --
    
    Information about the build input source code for this build project.
    - type (string) --
      
      The type of repository that contains the source code to be built. Valid values include:
      - CODECOMMIT : The source code is in an AWS CodeCommit repository.
      - CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
      - GITHUB : The source code is in a GitHub repository.
      - S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
    - location (string) --
      
      Information about the location of the source code to be built. Valid values include:
      - For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline will ignore it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
      - For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the build spec (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
      - For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, the path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` )
      - For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the build spec. Also, you must connect your AWS account to your GitHub account. To do this, use the AWS CodeBuild console to begin creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page that displays, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to. Then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project, and you may then leave the AWS CodeBuild console.) To instruct AWS CodeBuild to then use this connection, in the source object, set the auth object's type value to OAUTH .
    - buildspec (string) --
      
      The build spec declaration to use for the builds in this build project.
      
      If this value is not specified, a build spec must be included along with the source code to be built.
    - auth (dict) --
      
      Information about the authorization settings for AWS CodeBuild to access the source code to be built.
      
      This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly (unless the build project's source type value is GITHUB ).
      - type (string) --
        
        The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
      - resource (string) --
        
        The resource value that applies to the specified authorization type.
  - artifacts (dict) --
    
    Information about the build output artifacts for the build project.
    - type (string) --
      
      The type of build output artifact. Valid values include:
      - CODEPIPELINE : The build project will have build output generated through AWS CodePipeline.
      - NO_ARTIFACTS : The build project will not produce any build output.
      - S3 : The build project will store build output in Amazon Simple Storage Service (Amazon S3).
    - location (string) --
      
      Information about the build output artifact location, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , this is the name of the output bucket.
    - path (string) --
      
      Along with namespaceType and name , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , this is the path to the output artifact. If path is not specified, then path will not be used.
      For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , then the output artifact would be stored in the output bucket at MyArtifacts/MyArtifact.zip .
    - namespaceType (string) --
      
      Along with path and name , the pattern that AWS CodeBuild will use to determine the name and location to store the output artifact, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , then valid values include:
        
        BUILD_ID : Include the build ID in the location of the build output artifact.
        
        NONE : Do not include the build ID. This is the default if namespaceType is not specified.
      For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
    - name (string) --
      
      Along with path and namespaceType , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , this is the name of the output artifact object.
      For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
    - packaging (string) --
      
      The type of build output artifact to create, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , valid values include:
        
        NONE : AWS CodeBuild will create in the output bucket a folder containing the build output. This is the default if packaging is not specified.
        
        ZIP : AWS CodeBuild will create in the output bucket a ZIP file containing the build output.
  - environment (dict) --
    
    Information about the build environment for this build project.
    - type (string) --
      
      The type of build environment to use for related builds.
    - image (string) --
      
      The ID of the Docker image to use for this build project.
    - computeType (string) --
      
      Information about the compute resources the build project will use. Available values include:
      - BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
      - BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
      - BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for builds.
    - environmentVariables (list) --
      
      A set of environment variables to make available to builds for this build project.
      - (dict) --
        
        Information about an environment variable for a build project or a build.
        
        name (string) --
        
        The name or key of the environment variable.
        
        value (string) --
        
        The value of the environment variable.
        
        Warning
        
        We strongly discourage using environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. Environment variables can be displayed in plain text using tools such as the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI).
    - privilegedMode (boolean) --
      
      If set to true, enables running the Docker daemon inside a Docker container; otherwise, false or not specified (the default). This value must be set to true only if this build project will be used to build Docker images, and the specified build environment image is not one provided by AWS CodeBuild with Docker support. Otherwise, all associated builds that attempt to interact with the Docker daemon will fail. Note that you must also start the Docker daemon so that your builds can interact with it as needed. One way to do this is to initialize the Docker daemon in the install phase of your build spec by running the following build commands. (Do not run the following build commands if the specified build environment image is provided by AWS CodeBuild with Docker support.)
      
      - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=vfs& - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
  - serviceRole (string) --
    
    The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
  - timeoutInMinutes (integer) --
    
    How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed. The default is 60 minutes.
  - encryptionKey (string) --
    
    The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
    
    This is expressed either as the CMK's Amazon Resource Name (ARN) or, if specified, the CMK's alias (using the format ``alias/alias-name `` ).
  - tags (list) --
    
    The tags for this build project.
    
    These tags are available for use by AWS services that support AWS CodeBuild build project tags.
    - (dict) --
      
      A tag, consisting of a key and a value.
      
      This tag is available for use by AWS services that support tags in AWS CodeBuild.
      - key (string) --
        
        The tag's key.
      - value (string) --
        
        The tag's value.
  - created (datetime) --
    
    When the build project was created, expressed in Unix time format.
  - lastModified (datetime) --
    
    When the build project's settings were last modified, expressed in Unix time format.

ListCuratedEnvironmentImages (updated)

Link ¶
Changes (response)

{'platforms': {'languages': {'language': ['DOTNET']}}}

Gets information about Docker images that are managed by AWS CodeBuild.

See also: AWS API Documentation

Request Syntax

client.list_curated_environment_images()

rtype

dict

returns

Response Syntax

{
    'platforms': [
        {
            'platform': 'DEBIAN'|'AMAZON_LINUX'|'UBUNTU',
            'languages': [
                {
                    'language': 'JAVA'|'PYTHON'|'NODE_JS'|'RUBY'|'GOLANG'|'DOCKER'|'ANDROID'|'DOTNET'|'BASE',
                    'images': [
                        {
                            'name': 'string',
                            'description': 'string'
                        },
                    ]
                },
            ]
        },
    ]
}

Response Structure

(dict) --
- platforms (list) --
  
  Information about supported platforms for Docker images that are managed by AWS CodeBuild.
  - (dict) --
    
    A set of Docker images that are related by platform and are managed by AWS CodeBuild.
    - platform (string) --
      
      The platform's name.
    - languages (list) --
      
      The list of programming languages that are available for the specified platform.
      - (dict) --
        
        A set of Docker images that are related by programming language and are managed by AWS CodeBuild.
        
        language (string) --
        
        The programming language for the Docker images.
        
        images (list) --
        
        The list of Docker images that are related by the specified programming language.
        
        (dict) --
        
        Information about a Docker image that is managed by AWS CodeBuild.
        
        name (string) --
        
        The name of the Docker image.
        
        description (string) --
        
        The description of the Docker image.

StartBuild (updated)

Link ¶
Changes (response)

{'build': {'source': {'type': ['BITBUCKET']}}}

Starts running a build.

See also: AWS API Documentation

Request Syntax

client.start_build(
    projectName='string',
    sourceVersion='string',
    artifactsOverride={
        'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
        'location': 'string',
        'path': 'string',
        'namespaceType': 'NONE'|'BUILD_ID',
        'name': 'string',
        'packaging': 'NONE'|'ZIP'
    },
    environmentVariablesOverride=[
        {
            'name': 'string',
            'value': 'string'
        },
    ],
    buildspecOverride='string',
    timeoutInMinutesOverride=123
)

type projectName

string

param projectName

[REQUIRED]

The name of the build project to start running a build.

type sourceVersion

string

param sourceVersion

A version of the build input to be built, for this build only. If not specified, the latest version will be used. If specified, must be one of:

For AWS CodeCommit or GitHub: the commit ID to use.
For Amazon Simple Storage Service (Amazon S3): the version ID of the object representing the build input ZIP file to use.

type artifactsOverride

dict

param artifactsOverride

Build output artifact settings that override, for this build only, the latest ones already defined in the build project.

type (string) -- [REQUIRED]

The type of build output artifact. Valid values include:
- CODEPIPELINE : The build project will have build output generated through AWS CodePipeline.
- NO_ARTIFACTS : The build project will not produce any build output.
- S3 : The build project will store build output in Amazon Simple Storage Service (Amazon S3).
location (string) --

Information about the build output artifact location, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , this is the name of the output bucket.
path (string) --

Along with namespaceType and name , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , this is the path to the output artifact. If path is not specified, then path will not be used.
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , then the output artifact would be stored in the output bucket at MyArtifacts/MyArtifact.zip .
namespaceType (string) --

Along with path and name , the pattern that AWS CodeBuild will use to determine the name and location to store the output artifact, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , then valid values include:
  - BUILD_ID : Include the build ID in the location of the build output artifact.
  - NONE : Do not include the build ID. This is the default if namespaceType is not specified.
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
name (string) --

Along with path and namespaceType , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , this is the name of the output artifact object.
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
packaging (string) --

The type of build output artifact to create, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , valid values include:
  - NONE : AWS CodeBuild will create in the output bucket a folder containing the build output. This is the default if packaging is not specified.
  - ZIP : AWS CodeBuild will create in the output bucket a ZIP file containing the build output.

type environmentVariablesOverride

list

param environmentVariablesOverride

A set of environment variables that overrides, for this build only, the latest ones already defined in the build project.

(dict) --

Information about an environment variable for a build project or a build.
- name (string) -- [REQUIRED]
  
  The name or key of the environment variable.
- value (string) -- [REQUIRED]
  
  The value of the environment variable.
  
  Warning
  
  We strongly discourage using environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. Environment variables can be displayed in plain text using tools such as the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI).

type buildspecOverride

string

param buildspecOverride

A build spec declaration that overrides, for this build only, the latest one already defined in the build project.

type timeoutInMinutesOverride

integer

param timeoutInMinutesOverride

The number of build timeout minutes, from 5 to 480 (8 hours), that overrides, for this build only, the latest setting already defined in the build project.

rtype

dict

returns

Response Syntax

{
    'build': {
        'id': 'string',
        'arn': 'string',
        'startTime': datetime(2015, 1, 1),
        'endTime': datetime(2015, 1, 1),
        'currentPhase': 'string',
        'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
        'sourceVersion': 'string',
        'projectName': 'string',
        'phases': [
            {
                'phaseType': 'SUBMITTED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
                'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
                'startTime': datetime(2015, 1, 1),
                'endTime': datetime(2015, 1, 1),
                'durationInSeconds': 123,
                'contexts': [
                    {
                        'statusCode': 'string',
                        'message': 'string'
                    },
                ]
            },
        ],
        'source': {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET',
            'location': 'string',
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            }
        },
        'artifacts': {
            'location': 'string',
            'sha256sum': 'string',
            'md5sum': 'string'
        },
        'environment': {
            'type': 'LINUX_CONTAINER',
            'image': 'string',
            'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE',
            'environmentVariables': [
                {
                    'name': 'string',
                    'value': 'string'
                },
            ],
            'privilegedMode': True|False
        },
        'logs': {
            'groupName': 'string',
            'streamName': 'string',
            'deepLink': 'string'
        },
        'timeoutInMinutes': 123,
        'buildComplete': True|False,
        'initiator': 'string'
    }
}

Response Structure

(dict) --
- build (dict) --
  
  Information about the build to be run.
  - id (string) --
    
    The unique ID for the build.
  - arn (string) --
    
    The Amazon Resource Name (ARN) of the build.
  - startTime (datetime) --
    
    When the build process started, expressed in Unix time format.
  - endTime (datetime) --
    
    When the build process ended, expressed in Unix time format.
  - currentPhase (string) --
    
    The current build phase.
  - buildStatus (string) --
    
    The current status of the build. Valid values include:
    - FAILED : The build failed.
    - FAULT : The build faulted.
    - IN_PROGRESS : The build is still in progress.
    - STOPPED : The build stopped.
    - SUCCEEDED : The build succeeded.
    - TIMED_OUT : The build timed out.
  - sourceVersion (string) --
    
    Any version identifier for the version of the source code to be built.
  - projectName (string) --
    
    The name of the build project.
  - phases (list) --
    
    Information about all previous build phases that are completed and information about any current build phase that is not yet complete.
    - (dict) --
      
      Information about a stage for a build.
      - phaseType (string) --
        
        The name of the build phase. Valid values include:
        
        BUILD : Core build activities typically occur in this build phase.
        
        COMPLETED : The build has been completed.
        
        DOWNLOAD_SOURCE : Source code is being downloaded in this build phase.
        
        FINALIZING : The build process is completing in this build phase.
        
        INSTALL : Installation activities typically occur in this build phase.
        
        POST_BUILD : Post-build activities typically occur in this build phase.
        
        PRE_BUILD : Pre-build activities typically occur in this build phase.
        
        PROVISIONING : The build environment is being set up.
        
        SUBMITTED : The build has been submitted.
        
        UPLOAD_ARTIFACTS : Build output artifacts are being uploaded to the output location.
      - phaseStatus (string) --
        
        The current status of the build phase. Valid values include:
        
        FAILED : The build phase failed.
        
        FAULT : The build phase faulted.
        
        IN_PROGRESS : The build phase is still in progress.
        
        STOPPED : The build phase stopped.
        
        SUCCEEDED : The build phase succeeded.
        
        TIMED_OUT : The build phase timed out.
      - startTime (datetime) --
        
        When the build phase started, expressed in Unix time format.
      - endTime (datetime) --
        
        When the build phase ended, expressed in Unix time format.
      - durationInSeconds (integer) --
        
        How long, in seconds, between the starting and ending times of the build's phase.
      - contexts (list) --
        
        Additional information about a build phase, especially to help troubleshoot a failed build.
        
        (dict) --
        
        Additional information about a build phase that has an error. You can use this information to help troubleshoot a failed build.
        
        statusCode (string) --
        
        The status code for the context of the build phase.
        
        message (string) --
        
        An explanation of the build phase's context. This explanation might include a command ID and an exit code.
  - source (dict) --
    
    Information about the source code to be built.
    - type (string) --
      
      The type of repository that contains the source code to be built. Valid values include:
      - CODECOMMIT : The source code is in an AWS CodeCommit repository.
      - CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
      - GITHUB : The source code is in a GitHub repository.
      - S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
    - location (string) --
      
      Information about the location of the source code to be built. Valid values include:
      - For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline will ignore it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
      - For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the build spec (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
      - For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, the path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` )
      - For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the build spec. Also, you must connect your AWS account to your GitHub account. To do this, use the AWS CodeBuild console to begin creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page that displays, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to. Then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project, and you may then leave the AWS CodeBuild console.) To instruct AWS CodeBuild to then use this connection, in the source object, set the auth object's type value to OAUTH .
    - buildspec (string) --
      
      The build spec declaration to use for the builds in this build project.
      
      If this value is not specified, a build spec must be included along with the source code to be built.
    - auth (dict) --
      
      Information about the authorization settings for AWS CodeBuild to access the source code to be built.
      
      This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly (unless the build project's source type value is GITHUB ).
      - type (string) --
        
        The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
      - resource (string) --
        
        The resource value that applies to the specified authorization type.
  - artifacts (dict) --
    
    Information about the output artifacts for the build.
    - location (string) --
      
      Information about the location of the build artifacts.
    - sha256sum (string) --
      
      The SHA-256 hash of the build artifact.
      
      You can use this hash along with a checksum tool to confirm both file integrity and authenticity.
      
      Note
      
      This value is available only if the build project's packaging value is set to ZIP .
    - md5sum (string) --
      
      The MD5 hash of the build artifact.
      
      You can use this hash along with a checksum tool to confirm both file integrity and authenticity.
      
      Note
      
      This value is available only if the build project's packaging value is set to ZIP .
  - environment (dict) --
    
    Information about the build environment for this build.
    - type (string) --
      
      The type of build environment to use for related builds.
    - image (string) --
      
      The ID of the Docker image to use for this build project.
    - computeType (string) --
      
      Information about the compute resources the build project will use. Available values include:
      - BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
      - BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
      - BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for builds.
    - environmentVariables (list) --
      
      A set of environment variables to make available to builds for this build project.
      - (dict) --
        
        Information about an environment variable for a build project or a build.
        
        name (string) --
        
        The name or key of the environment variable.
        
        value (string) --
        
        The value of the environment variable.
        
        Warning
        
        We strongly discourage using environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. Environment variables can be displayed in plain text using tools such as the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI).
    - privilegedMode (boolean) --
      
      If set to true, enables running the Docker daemon inside a Docker container; otherwise, false or not specified (the default). This value must be set to true only if this build project will be used to build Docker images, and the specified build environment image is not one provided by AWS CodeBuild with Docker support. Otherwise, all associated builds that attempt to interact with the Docker daemon will fail. Note that you must also start the Docker daemon so that your builds can interact with it as needed. One way to do this is to initialize the Docker daemon in the install phase of your build spec by running the following build commands. (Do not run the following build commands if the specified build environment image is provided by AWS CodeBuild with Docker support.)
      
      - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=vfs& - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
  - logs (dict) --
    
    Information about the build's logs in Amazon CloudWatch Logs.
    - groupName (string) --
      
      The name of the Amazon CloudWatch Logs group for the build logs.
    - streamName (string) --
      
      The name of the Amazon CloudWatch Logs stream for the build logs.
    - deepLink (string) --
      
      The URL to an individual build log in Amazon CloudWatch Logs.
  - timeoutInMinutes (integer) --
    
    How long, in minutes, for AWS CodeBuild to wait before timing out this build if it does not get marked as completed.
  - buildComplete (boolean) --
    
    Whether the build has finished. True if completed; otherwise, false.
  - initiator (string) --
    
    The entity that started the build. Valid values include:
    - If AWS CodePipeline started the build, the pipeline's name (for example, codepipeline/my-demo-pipeline ).
    - If an AWS Identity and Access Management (IAM) user started the build, the user's name (for example MyUserName ).
    - If the Jenkins plugin for AWS CodeBuild started the build, the string CodeBuild-Jenkins-Plugin .

StopBuild (updated)

Link ¶
Changes (response)

{'build': {'source': {'type': ['BITBUCKET']}}}

Attempts to stop running a build.

See also: AWS API Documentation

Request Syntax

client.stop_build(
    id='string'
)

type id

string

param id

[REQUIRED]

The ID of the build.

rtype

dict

returns

Response Syntax

{
    'build': {
        'id': 'string',
        'arn': 'string',
        'startTime': datetime(2015, 1, 1),
        'endTime': datetime(2015, 1, 1),
        'currentPhase': 'string',
        'buildStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
        'sourceVersion': 'string',
        'projectName': 'string',
        'phases': [
            {
                'phaseType': 'SUBMITTED'|'PROVISIONING'|'DOWNLOAD_SOURCE'|'INSTALL'|'PRE_BUILD'|'BUILD'|'POST_BUILD'|'UPLOAD_ARTIFACTS'|'FINALIZING'|'COMPLETED',
                'phaseStatus': 'SUCCEEDED'|'FAILED'|'FAULT'|'TIMED_OUT'|'IN_PROGRESS'|'STOPPED',
                'startTime': datetime(2015, 1, 1),
                'endTime': datetime(2015, 1, 1),
                'durationInSeconds': 123,
                'contexts': [
                    {
                        'statusCode': 'string',
                        'message': 'string'
                    },
                ]
            },
        ],
        'source': {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET',
            'location': 'string',
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            }
        },
        'artifacts': {
            'location': 'string',
            'sha256sum': 'string',
            'md5sum': 'string'
        },
        'environment': {
            'type': 'LINUX_CONTAINER',
            'image': 'string',
            'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE',
            'environmentVariables': [
                {
                    'name': 'string',
                    'value': 'string'
                },
            ],
            'privilegedMode': True|False
        },
        'logs': {
            'groupName': 'string',
            'streamName': 'string',
            'deepLink': 'string'
        },
        'timeoutInMinutes': 123,
        'buildComplete': True|False,
        'initiator': 'string'
    }
}

Response Structure

(dict) --
- build (dict) --
  
  Information about the build.
  - id (string) --
    
    The unique ID for the build.
  - arn (string) --
    
    The Amazon Resource Name (ARN) of the build.
  - startTime (datetime) --
    
    When the build process started, expressed in Unix time format.
  - endTime (datetime) --
    
    When the build process ended, expressed in Unix time format.
  - currentPhase (string) --
    
    The current build phase.
  - buildStatus (string) --
    
    The current status of the build. Valid values include:
    - FAILED : The build failed.
    - FAULT : The build faulted.
    - IN_PROGRESS : The build is still in progress.
    - STOPPED : The build stopped.
    - SUCCEEDED : The build succeeded.
    - TIMED_OUT : The build timed out.
  - sourceVersion (string) --
    
    Any version identifier for the version of the source code to be built.
  - projectName (string) --
    
    The name of the build project.
  - phases (list) --
    
    Information about all previous build phases that are completed and information about any current build phase that is not yet complete.
    - (dict) --
      
      Information about a stage for a build.
      - phaseType (string) --
        
        The name of the build phase. Valid values include:
        
        BUILD : Core build activities typically occur in this build phase.
        
        COMPLETED : The build has been completed.
        
        DOWNLOAD_SOURCE : Source code is being downloaded in this build phase.
        
        FINALIZING : The build process is completing in this build phase.
        
        INSTALL : Installation activities typically occur in this build phase.
        
        POST_BUILD : Post-build activities typically occur in this build phase.
        
        PRE_BUILD : Pre-build activities typically occur in this build phase.
        
        PROVISIONING : The build environment is being set up.
        
        SUBMITTED : The build has been submitted.
        
        UPLOAD_ARTIFACTS : Build output artifacts are being uploaded to the output location.
      - phaseStatus (string) --
        
        The current status of the build phase. Valid values include:
        
        FAILED : The build phase failed.
        
        FAULT : The build phase faulted.
        
        IN_PROGRESS : The build phase is still in progress.
        
        STOPPED : The build phase stopped.
        
        SUCCEEDED : The build phase succeeded.
        
        TIMED_OUT : The build phase timed out.
      - startTime (datetime) --
        
        When the build phase started, expressed in Unix time format.
      - endTime (datetime) --
        
        When the build phase ended, expressed in Unix time format.
      - durationInSeconds (integer) --
        
        How long, in seconds, between the starting and ending times of the build's phase.
      - contexts (list) --
        
        Additional information about a build phase, especially to help troubleshoot a failed build.
        
        (dict) --
        
        Additional information about a build phase that has an error. You can use this information to help troubleshoot a failed build.
        
        statusCode (string) --
        
        The status code for the context of the build phase.
        
        message (string) --
        
        An explanation of the build phase's context. This explanation might include a command ID and an exit code.
  - source (dict) --
    
    Information about the source code to be built.
    - type (string) --
      
      The type of repository that contains the source code to be built. Valid values include:
      - CODECOMMIT : The source code is in an AWS CodeCommit repository.
      - CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
      - GITHUB : The source code is in a GitHub repository.
      - S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
    - location (string) --
      
      Information about the location of the source code to be built. Valid values include:
      - For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline will ignore it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
      - For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the build spec (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
      - For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, the path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` )
      - For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the build spec. Also, you must connect your AWS account to your GitHub account. To do this, use the AWS CodeBuild console to begin creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page that displays, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to. Then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project, and you may then leave the AWS CodeBuild console.) To instruct AWS CodeBuild to then use this connection, in the source object, set the auth object's type value to OAUTH .
    - buildspec (string) --
      
      The build spec declaration to use for the builds in this build project.
      
      If this value is not specified, a build spec must be included along with the source code to be built.
    - auth (dict) --
      
      Information about the authorization settings for AWS CodeBuild to access the source code to be built.
      
      This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly (unless the build project's source type value is GITHUB ).
      - type (string) --
        
        The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
      - resource (string) --
        
        The resource value that applies to the specified authorization type.
  - artifacts (dict) --
    
    Information about the output artifacts for the build.
    - location (string) --
      
      Information about the location of the build artifacts.
    - sha256sum (string) --
      
      The SHA-256 hash of the build artifact.
      
      You can use this hash along with a checksum tool to confirm both file integrity and authenticity.
      
      Note
      
      This value is available only if the build project's packaging value is set to ZIP .
    - md5sum (string) --
      
      The MD5 hash of the build artifact.
      
      You can use this hash along with a checksum tool to confirm both file integrity and authenticity.
      
      Note
      
      This value is available only if the build project's packaging value is set to ZIP .
  - environment (dict) --
    
    Information about the build environment for this build.
    - type (string) --
      
      The type of build environment to use for related builds.
    - image (string) --
      
      The ID of the Docker image to use for this build project.
    - computeType (string) --
      
      Information about the compute resources the build project will use. Available values include:
      - BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
      - BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
      - BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for builds.
    - environmentVariables (list) --
      
      A set of environment variables to make available to builds for this build project.
      - (dict) --
        
        Information about an environment variable for a build project or a build.
        
        name (string) --
        
        The name or key of the environment variable.
        
        value (string) --
        
        The value of the environment variable.
        
        Warning
        
        We strongly discourage using environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. Environment variables can be displayed in plain text using tools such as the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI).
    - privilegedMode (boolean) --
      
      If set to true, enables running the Docker daemon inside a Docker container; otherwise, false or not specified (the default). This value must be set to true only if this build project will be used to build Docker images, and the specified build environment image is not one provided by AWS CodeBuild with Docker support. Otherwise, all associated builds that attempt to interact with the Docker daemon will fail. Note that you must also start the Docker daemon so that your builds can interact with it as needed. One way to do this is to initialize the Docker daemon in the install phase of your build spec by running the following build commands. (Do not run the following build commands if the specified build environment image is provided by AWS CodeBuild with Docker support.)
      
      - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=vfs& - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
  - logs (dict) --
    
    Information about the build's logs in Amazon CloudWatch Logs.
    - groupName (string) --
      
      The name of the Amazon CloudWatch Logs group for the build logs.
    - streamName (string) --
      
      The name of the Amazon CloudWatch Logs stream for the build logs.
    - deepLink (string) --
      
      The URL to an individual build log in Amazon CloudWatch Logs.
  - timeoutInMinutes (integer) --
    
    How long, in minutes, for AWS CodeBuild to wait before timing out this build if it does not get marked as completed.
  - buildComplete (boolean) --
    
    Whether the build has finished. True if completed; otherwise, false.
  - initiator (string) --
    
    The entity that started the build. Valid values include:
    - If AWS CodePipeline started the build, the pipeline's name (for example, codepipeline/my-demo-pipeline ).
    - If an AWS Identity and Access Management (IAM) user started the build, the user's name (for example MyUserName ).
    - If the Jenkins plugin for AWS CodeBuild started the build, the string CodeBuild-Jenkins-Plugin .

UpdateProject (updated)

Link ¶
Changes (request, response)
Request

{'source': {'type': ['BITBUCKET']}}

Response

{'project': {'source': {'type': ['BITBUCKET']}}}

Changes the settings of a build project.

See also: AWS API Documentation

Request Syntax

client.update_project(
    name='string',
    description='string',
    source={
        'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET',
        'location': 'string',
        'buildspec': 'string',
        'auth': {
            'type': 'OAUTH',
            'resource': 'string'
        }
    },
    artifacts={
        'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
        'location': 'string',
        'path': 'string',
        'namespaceType': 'NONE'|'BUILD_ID',
        'name': 'string',
        'packaging': 'NONE'|'ZIP'
    },
    environment={
        'type': 'LINUX_CONTAINER',
        'image': 'string',
        'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE',
        'environmentVariables': [
            {
                'name': 'string',
                'value': 'string'
            },
        ],
        'privilegedMode': True|False
    },
    serviceRole='string',
    timeoutInMinutes=123,
    encryptionKey='string',
    tags=[
        {
            'key': 'string',
            'value': 'string'
        },
    ]
)

type name

string

param name

[REQUIRED]

The name of the build project.

Note

You cannot change a build project's name.

type description

string

param description

A new or replacement description of the build project.

type source

dict

param source

Information to be changed about the build input source code for the build project.

type (string) -- [REQUIRED]

The type of repository that contains the source code to be built. Valid values include:
- CODECOMMIT : The source code is in an AWS CodeCommit repository.
- CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
- GITHUB : The source code is in a GitHub repository.
- S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
location (string) --

Information about the location of the source code to be built. Valid values include:
- For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline will ignore it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
- For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the build spec (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
- For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, the path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` )
- For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the build spec. Also, you must connect your AWS account to your GitHub account. To do this, use the AWS CodeBuild console to begin creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page that displays, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to. Then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project, and you may then leave the AWS CodeBuild console.) To instruct AWS CodeBuild to then use this connection, in the source object, set the auth object's type value to OAUTH .
buildspec (string) --

The build spec declaration to use for the builds in this build project.

If this value is not specified, a build spec must be included along with the source code to be built.
auth (dict) --

Information about the authorization settings for AWS CodeBuild to access the source code to be built.

This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly (unless the build project's source type value is GITHUB ).
- type (string) -- [REQUIRED]
  
  The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
- resource (string) --
  
  The resource value that applies to the specified authorization type.

type artifacts

dict

param artifacts

Information to be changed about the build output artifacts for the build project.

type (string) -- [REQUIRED]

The type of build output artifact. Valid values include:
- CODEPIPELINE : The build project will have build output generated through AWS CodePipeline.
- NO_ARTIFACTS : The build project will not produce any build output.
- S3 : The build project will store build output in Amazon Simple Storage Service (Amazon S3).
location (string) --

Information about the build output artifact location, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , this is the name of the output bucket.
path (string) --

Along with namespaceType and name , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , this is the path to the output artifact. If path is not specified, then path will not be used.
For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , then the output artifact would be stored in the output bucket at MyArtifacts/MyArtifact.zip .
namespaceType (string) --

Along with path and name , the pattern that AWS CodeBuild will use to determine the name and location to store the output artifact, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , then valid values include:
  - BUILD_ID : Include the build ID in the location of the build output artifact.
  - NONE : Do not include the build ID. This is the default if namespaceType is not specified.
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
name (string) --

Along with path and namespaceType , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , this is the name of the output artifact object.
For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
packaging (string) --

The type of build output artifact to create, as follows:
- If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
- If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
- If type is set to S3 , valid values include:
  - NONE : AWS CodeBuild will create in the output bucket a folder containing the build output. This is the default if packaging is not specified.
  - ZIP : AWS CodeBuild will create in the output bucket a ZIP file containing the build output.

type environment

dict

param environment

Information to be changed about the build environment for the build project.

type (string) -- [REQUIRED]

The type of build environment to use for related builds.
image (string) -- [REQUIRED]

The ID of the Docker image to use for this build project.
computeType (string) -- [REQUIRED]

Information about the compute resources the build project will use. Available values include:
- BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
- BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
- BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for builds.
environmentVariables (list) --

A set of environment variables to make available to builds for this build project.
- (dict) --
  
  Information about an environment variable for a build project or a build.
  - name (string) -- [REQUIRED]
    
    The name or key of the environment variable.
  - value (string) -- [REQUIRED]
    
    The value of the environment variable.
    
    Warning
    
    We strongly discourage using environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. Environment variables can be displayed in plain text using tools such as the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI).
privilegedMode (boolean) --

If set to true, enables running the Docker daemon inside a Docker container; otherwise, false or not specified (the default). This value must be set to true only if this build project will be used to build Docker images, and the specified build environment image is not one provided by AWS CodeBuild with Docker support. Otherwise, all associated builds that attempt to interact with the Docker daemon will fail. Note that you must also start the Docker daemon so that your builds can interact with it as needed. One way to do this is to initialize the Docker daemon in the install phase of your build spec by running the following build commands. (Do not run the following build commands if the specified build environment image is provided by AWS CodeBuild with Docker support.)

- nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=vfs& - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"

type serviceRole

string

param serviceRole

The replacement ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.

type timeoutInMinutes

integer

param timeoutInMinutes

The replacement value in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed.

type encryptionKey

string

param encryptionKey

The replacement AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.

You can specify either the CMK's Amazon Resource Name (ARN) or, if available, the CMK's alias (using the format ``alias/alias-name `` ).

type tags

list

param tags

The replacement set of tags for this build project.

These tags are available for use by AWS services that support AWS CodeBuild build project tags.

(dict) --

A tag, consisting of a key and a value.

This tag is available for use by AWS services that support tags in AWS CodeBuild.
- key (string) --
  
  The tag's key.
- value (string) --
  
  The tag's value.

rtype

dict

returns

Response Syntax

{
    'project': {
        'name': 'string',
        'arn': 'string',
        'description': 'string',
        'source': {
            'type': 'CODECOMMIT'|'CODEPIPELINE'|'GITHUB'|'S3'|'BITBUCKET',
            'location': 'string',
            'buildspec': 'string',
            'auth': {
                'type': 'OAUTH',
                'resource': 'string'
            }
        },
        'artifacts': {
            'type': 'CODEPIPELINE'|'S3'|'NO_ARTIFACTS',
            'location': 'string',
            'path': 'string',
            'namespaceType': 'NONE'|'BUILD_ID',
            'name': 'string',
            'packaging': 'NONE'|'ZIP'
        },
        'environment': {
            'type': 'LINUX_CONTAINER',
            'image': 'string',
            'computeType': 'BUILD_GENERAL1_SMALL'|'BUILD_GENERAL1_MEDIUM'|'BUILD_GENERAL1_LARGE',
            'environmentVariables': [
                {
                    'name': 'string',
                    'value': 'string'
                },
            ],
            'privilegedMode': True|False
        },
        'serviceRole': 'string',
        'timeoutInMinutes': 123,
        'encryptionKey': 'string',
        'tags': [
            {
                'key': 'string',
                'value': 'string'
            },
        ],
        'created': datetime(2015, 1, 1),
        'lastModified': datetime(2015, 1, 1)
    }
}

Response Structure

(dict) --
- project (dict) --
  
  Information about the build project that was changed.
  - name (string) --
    
    The name of the build project.
  - arn (string) --
    
    The Amazon Resource Name (ARN) of the build project.
  - description (string) --
    
    A description that makes the build project easy to identify.
  - source (dict) --
    
    Information about the build input source code for this build project.
    - type (string) --
      
      The type of repository that contains the source code to be built. Valid values include:
      - CODECOMMIT : The source code is in an AWS CodeCommit repository.
      - CODEPIPELINE : The source code settings are specified in the source action of a pipeline in AWS CodePipeline.
      - GITHUB : The source code is in a GitHub repository.
      - S3 : The source code is in an Amazon Simple Storage Service (Amazon S3) input bucket.
    - location (string) --
      
      Information about the location of the source code to be built. Valid values include:
      - For source code settings that are specified in the source action of a pipeline in AWS CodePipeline, location should not be specified. If it is specified, AWS CodePipeline will ignore it. This is because AWS CodePipeline uses the settings in a pipeline's source action instead of this value.
      - For source code in an AWS CodeCommit repository, the HTTPS clone URL to the repository that contains the source code and the build spec (for example, ``https://git-codecommit.*region-ID* .amazonaws.com/v1/repos/repo-name `` ).
      - For source code in an Amazon Simple Storage Service (Amazon S3) input bucket, the path to the ZIP file that contains the source code (for example, `` bucket-name /path /to /object-name .zip`` )
      - For source code in a GitHub repository, the HTTPS clone URL to the repository that contains the source and the build spec. Also, you must connect your AWS account to your GitHub account. To do this, use the AWS CodeBuild console to begin creating a build project. When you use the console to connect (or reconnect) with GitHub, on the GitHub Authorize application page that displays, for Organization access , choose Request access next to each repository you want to allow AWS CodeBuild to have access to. Then choose Authorize application . (After you have connected to your GitHub account, you do not need to finish creating the build project, and you may then leave the AWS CodeBuild console.) To instruct AWS CodeBuild to then use this connection, in the source object, set the auth object's type value to OAUTH .
    - buildspec (string) --
      
      The build spec declaration to use for the builds in this build project.
      
      If this value is not specified, a build spec must be included along with the source code to be built.
    - auth (dict) --
      
      Information about the authorization settings for AWS CodeBuild to access the source code to be built.
      
      This information is for the AWS CodeBuild console's use only. Your code should not get or set this information directly (unless the build project's source type value is GITHUB ).
      - type (string) --
        
        The authorization type to use. The only valid value is OAUTH , which represents the OAuth authorization type.
      - resource (string) --
        
        The resource value that applies to the specified authorization type.
  - artifacts (dict) --
    
    Information about the build output artifacts for the build project.
    - type (string) --
      
      The type of build output artifact. Valid values include:
      - CODEPIPELINE : The build project will have build output generated through AWS CodePipeline.
      - NO_ARTIFACTS : The build project will not produce any build output.
      - S3 : The build project will store build output in Amazon Simple Storage Service (Amazon S3).
    - location (string) --
      
      Information about the build output artifact location, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output locations instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , this is the name of the output bucket.
    - path (string) --
      
      Along with namespaceType and name , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , this is the path to the output artifact. If path is not specified, then path will not be used.
      For example, if path is set to MyArtifacts , namespaceType is set to NONE , and name is set to MyArtifact.zip , then the output artifact would be stored in the output bucket at MyArtifacts/MyArtifact.zip .
    - namespaceType (string) --
      
      Along with path and name , the pattern that AWS CodeBuild will use to determine the name and location to store the output artifact, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , then valid values include:
        
        BUILD_ID : Include the build ID in the location of the build output artifact.
        
        NONE : Do not include the build ID. This is the default if namespaceType is not specified.
      For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
    - name (string) --
      
      Along with path and namespaceType , the pattern that AWS CodeBuild will use to name and store the output artifact, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output names instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , this is the name of the output artifact object.
      For example, if path is set to MyArtifacts , namespaceType is set to BUILD_ID , and name is set to MyArtifact.zip , then the output artifact would be stored in MyArtifacts/*build-ID* /MyArtifact.zip .
    - packaging (string) --
      
      The type of build output artifact to create, as follows:
      - If type is set to CODEPIPELINE , then AWS CodePipeline will ignore this value if specified. This is because AWS CodePipeline manages its build output artifacts instead of AWS CodeBuild.
      - If type is set to NO_ARTIFACTS , then this value will be ignored if specified, because no build output will be produced.
      - If type is set to S3 , valid values include:
        
        NONE : AWS CodeBuild will create in the output bucket a folder containing the build output. This is the default if packaging is not specified.
        
        ZIP : AWS CodeBuild will create in the output bucket a ZIP file containing the build output.
  - environment (dict) --
    
    Information about the build environment for this build project.
    - type (string) --
      
      The type of build environment to use for related builds.
    - image (string) --
      
      The ID of the Docker image to use for this build project.
    - computeType (string) --
      
      Information about the compute resources the build project will use. Available values include:
      - BUILD_GENERAL1_SMALL : Use up to 3 GB memory and 2 vCPUs for builds.
      - BUILD_GENERAL1_MEDIUM : Use up to 7 GB memory and 4 vCPUs for builds.
      - BUILD_GENERAL1_LARGE : Use up to 15 GB memory and 8 vCPUs for builds.
    - environmentVariables (list) --
      
      A set of environment variables to make available to builds for this build project.
      - (dict) --
        
        Information about an environment variable for a build project or a build.
        
        name (string) --
        
        The name or key of the environment variable.
        
        value (string) --
        
        The value of the environment variable.
        
        Warning
        
        We strongly discourage using environment variables to store sensitive values, especially AWS secret key IDs and secret access keys. Environment variables can be displayed in plain text using tools such as the AWS CodeBuild console and the AWS Command Line Interface (AWS CLI).
    - privilegedMode (boolean) --
      
      If set to true, enables running the Docker daemon inside a Docker container; otherwise, false or not specified (the default). This value must be set to true only if this build project will be used to build Docker images, and the specified build environment image is not one provided by AWS CodeBuild with Docker support. Otherwise, all associated builds that attempt to interact with the Docker daemon will fail. Note that you must also start the Docker daemon so that your builds can interact with it as needed. One way to do this is to initialize the Docker daemon in the install phase of your build spec by running the following build commands. (Do not run the following build commands if the specified build environment image is provided by AWS CodeBuild with Docker support.)
      
      - nohup /usr/local/bin/dockerd --host=unix:///var/run/docker.sock --host=tcp://0.0.0.0:2375 --storage-driver=vfs& - timeout -t 15 sh -c "until docker info; do echo .; sleep 1; done"
  - serviceRole (string) --
    
    The ARN of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
  - timeoutInMinutes (integer) --
    
    How long, in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait before timing out any related build that did not get marked as completed. The default is 60 minutes.
  - encryptionKey (string) --
    
    The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build output artifacts.
    
    This is expressed either as the CMK's Amazon Resource Name (ARN) or, if specified, the CMK's alias (using the format ``alias/alias-name `` ).
  - tags (list) --
    
    The tags for this build project.
    
    These tags are available for use by AWS services that support AWS CodeBuild build project tags.
    - (dict) --
      
      A tag, consisting of a key and a value.
      
      This tag is available for use by AWS services that support tags in AWS CodeBuild.
      - key (string) --
        
        The tag's key.
      - value (string) --
        
        The tag's value.
  - created (datetime) --
    
    When the build project was created, expressed in Unix time format.
  - lastModified (datetime) --
    
    When the build project's settings were last modified, expressed in Unix time format.