2019/08/30 - Amazon EC2 Container Service - 1 new 7 updated api methods
Changes This release of Amazon Elastic Container Service (Amazon ECS) introduces support for modifying the cluster settings for existing clusters, which enables you to toggle whether Container Insights is enabled or not. Support is also introduced for custom log routing using the ECS FireLens integration.
Modifies the settings to use for a cluster.
See also: AWS API Documentation
Request Syntax
client.update_cluster_settings(
cluster='string',
settings=[
{
'name': 'containerInsights',
'value': 'string'
},
]
)
string
[REQUIRED]
The name of the cluster to modify the settings for.
list
[REQUIRED]
The setting to use by default for a cluster. This parameter is used to enable CloudWatch Container Insights for a cluster. If this value is specified, it will override the containerInsights value set with PutAccountSetting or PutAccountSettingDefault .
(dict) --
The settings to use when creating a cluster. This parameter is used to enable CloudWatch Container Insights for a cluster.
name (string) --
The name of the cluster setting. The only supported value is containerInsights .
value (string) --
The value to set for the cluster setting. The supported values are enabled and disabled . If enabled is specified, CloudWatch Container Insights will be enabled for the cluster, otherwise it will be disabled unless the containerInsights account setting is enabled. If a cluster value is specified, it will override the containerInsights value set with PutAccountSetting or PutAccountSettingDefault .
dict
Response Syntax
{
'cluster': {
'clusterArn': 'string',
'clusterName': 'string',
'status': 'string',
'registeredContainerInstancesCount': 123,
'runningTasksCount': 123,
'pendingTasksCount': 123,
'activeServicesCount': 123,
'statistics': [
{
'name': 'string',
'value': 'string'
},
],
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'settings': [
{
'name': 'containerInsights',
'value': 'string'
},
]
}
}
Response Structure
(dict) --
cluster (dict) --
A regional grouping of one or more container instances on which you can run task requests. Each account receives a default cluster the first time you use the Amazon ECS service, but you may also create other clusters. Clusters may contain more than one instance type simultaneously.
clusterArn (string) --
The Amazon Resource Name (ARN) that identifies the cluster. The ARN contains the arn:aws:ecs namespace, followed by the Region of the cluster, the AWS account ID of the cluster owner, the cluster namespace, and then the cluster name. For example, arn:aws:ecs:region:012345678910:cluster/test .
clusterName (string) --
A user-generated string that you use to identify your cluster.
status (string) --
The status of the cluster. The valid values are ACTIVE or INACTIVE . ACTIVE indicates that you can register container instances with the cluster and the associated instances can accept tasks.
registeredContainerInstancesCount (integer) --
The number of container instances registered into the cluster. This includes container instances in both ACTIVE and DRAINING status.
runningTasksCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingTasksCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
activeServicesCount (integer) --
The number of services that are running on the cluster in an ACTIVE state. You can view these services with ListServices .
statistics (list) --
Additional information about your clusters that are separated by launch type, including:
runningEC2TasksCount
RunningFargateTasksCount
pendingEC2TasksCount
pendingFargateTasksCount
activeEC2ServiceCount
activeFargateServiceCount
drainingEC2ServiceCount
drainingFargateServiceCount
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
tags (list) --
The metadata that you apply to the cluster to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
settings (list) --
The settings for the cluster. This parameter indicates whether CloudWatch Container Insights is enabled or disabled for a cluster.
(dict) --
The settings to use when creating a cluster. This parameter is used to enable CloudWatch Container Insights for a cluster.
name (string) --
The name of the cluster setting. The only supported value is containerInsights .
value (string) --
The value to set for the cluster setting. The supported values are enabled and disabled . If enabled is specified, CloudWatch Container Insights will be enabled for the cluster, otherwise it will be disabled unless the containerInsights account setting is enabled. If a cluster value is specified, it will override the containerInsights value set with PutAccountSetting or PutAccountSettingDefault .
{'taskDefinition': {'containerDefinitions': {'firelensConfiguration': {'options': {'string': 'string'},
'type': 'fluentd '
'| '
'fluentbit'},
'logConfiguration': {'logDriver': ['awsfirelens']}}}}
Deregisters the specified task definition by family and revision. Upon deregistration, the task definition is marked as INACTIVE . Existing tasks and services that reference an INACTIVE task definition continue to run without disruption. Existing services that reference an INACTIVE task definition can still scale up or down by modifying the service's desired count.
You cannot use an INACTIVE task definition to run new tasks or create new services, and you cannot update an existing service to reference an INACTIVE task definition. However, there may be up to a 10-minute window following deregistration where these restrictions have not yet taken effect.
Note
At this time, INACTIVE task definitions remain discoverable in your account indefinitely. However, this behavior is subject to change in the future, so you should not rely on INACTIVE task definitions persisting beyond the lifecycle of any associated tasks and services.
See also: AWS API Documentation
Request Syntax
client.deregister_task_definition(
taskDefinition='string'
)
string
[REQUIRED]
The family and revision (family:revision ) or full Amazon Resource Name (ARN) of the task definition to deregister. You must specify a revision .
dict
Response Syntax
{
'taskDefinition': {
'taskDefinitionArn': 'string',
'containerDefinitions': [
{
'name': 'string',
'image': 'string',
'repositoryCredentials': {
'credentialsParameter': 'string'
},
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'links': [
'string',
],
'portMappings': [
{
'containerPort': 123,
'hostPort': 123,
'protocol': 'tcp'|'udp'
},
],
'essential': True|False,
'entryPoint': [
'string',
],
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'mountPoints': [
{
'sourceVolume': 'string',
'containerPath': 'string',
'readOnly': True|False
},
],
'volumesFrom': [
{
'sourceContainer': 'string',
'readOnly': True|False
},
],
'linuxParameters': {
'capabilities': {
'add': [
'string',
],
'drop': [
'string',
]
},
'devices': [
{
'hostPath': 'string',
'containerPath': 'string',
'permissions': [
'read'|'write'|'mknod',
]
},
],
'initProcessEnabled': True|False,
'sharedMemorySize': 123,
'tmpfs': [
{
'containerPath': 'string',
'size': 123,
'mountOptions': [
'string',
]
},
],
'maxSwap': 123,
'swappiness': 123
},
'secrets': [
{
'name': 'string',
'valueFrom': 'string'
},
],
'dependsOn': [
{
'containerName': 'string',
'condition': 'START'|'COMPLETE'|'SUCCESS'|'HEALTHY'
},
],
'startTimeout': 123,
'stopTimeout': 123,
'hostname': 'string',
'user': 'string',
'workingDirectory': 'string',
'disableNetworking': True|False,
'privileged': True|False,
'readonlyRootFilesystem': True|False,
'dnsServers': [
'string',
],
'dnsSearchDomains': [
'string',
],
'extraHosts': [
{
'hostname': 'string',
'ipAddress': 'string'
},
],
'dockerSecurityOptions': [
'string',
],
'interactive': True|False,
'pseudoTerminal': True|False,
'dockerLabels': {
'string': 'string'
},
'ulimits': [
{
'name': 'core'|'cpu'|'data'|'fsize'|'locks'|'memlock'|'msgqueue'|'nice'|'nofile'|'nproc'|'rss'|'rtprio'|'rttime'|'sigpending'|'stack',
'softLimit': 123,
'hardLimit': 123
},
],
'logConfiguration': {
'logDriver': 'json-file'|'syslog'|'journald'|'gelf'|'fluentd'|'awslogs'|'splunk'|'awsfirelens',
'options': {
'string': 'string'
},
'secretOptions': [
{
'name': 'string',
'valueFrom': 'string'
},
]
},
'healthCheck': {
'command': [
'string',
],
'interval': 123,
'timeout': 123,
'retries': 123,
'startPeriod': 123
},
'systemControls': [
{
'namespace': 'string',
'value': 'string'
},
],
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
],
'firelensConfiguration': {
'type': 'fluentd'|'fluentbit',
'options': {
'string': 'string'
}
}
},
],
'family': 'string',
'taskRoleArn': 'string',
'executionRoleArn': 'string',
'networkMode': 'bridge'|'host'|'awsvpc'|'none',
'revision': 123,
'volumes': [
{
'name': 'string',
'host': {
'sourcePath': 'string'
},
'dockerVolumeConfiguration': {
'scope': 'task'|'shared',
'autoprovision': True|False,
'driver': 'string',
'driverOpts': {
'string': 'string'
},
'labels': {
'string': 'string'
}
}
},
],
'status': 'ACTIVE'|'INACTIVE',
'requiresAttributes': [
{
'name': 'string',
'value': 'string',
'targetType': 'container-instance',
'targetId': 'string'
},
],
'placementConstraints': [
{
'type': 'memberOf',
'expression': 'string'
},
],
'compatibilities': [
'EC2'|'FARGATE',
],
'requiresCompatibilities': [
'EC2'|'FARGATE',
],
'cpu': 'string',
'memory': 'string',
'pidMode': 'host'|'task',
'ipcMode': 'host'|'task'|'none',
'proxyConfiguration': {
'type': 'APPMESH',
'containerName': 'string',
'properties': [
{
'name': 'string',
'value': 'string'
},
]
}
}
}
Response Structure
(dict) --
taskDefinition (dict) --
The full description of the deregistered task.
taskDefinitionArn (string) --
The full Amazon Resource Name (ARN) of the task definition.
containerDefinitions (list) --
A list of container definitions in JSON format that describe the different containers that make up your task. For more information about container definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide .
(dict) --
Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
name (string) --
The name of a container. If you are linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. This parameter maps to name in the Create a container section of the Docker Remote API and the --name option to docker run .
image (string) --
The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with either `` repository-url /image :tag `` or `` repository-url /image @*digest* `` . Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run .
When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image are not propagated to already running tasks.
Images in Amazon ECR repositories can be specified by either using the full registry/repository:tag or registry/repository@digest . For example, 012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>:latest or 012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE .
Images in official repositories on Docker Hub use a single name (for example, ubuntu or mongo ).
Images in other repositories on Docker Hub are qualified with an organization name (for example, amazon/amazon-ecs-agent ).
Images in other online repositories are qualified further by a domain name (for example, quay.io/assemblyline/ubuntu ).
repositoryCredentials (dict) --
The private repository authentication credentials to use.
credentialsParameter (string) --
The Amazon Resource Name (ARN) of the secret containing the private repository credentials.
Note
When you are using the Amazon ECS API, AWS CLI, or AWS SDK, if the secret exists in the same Region as the task that you are launching then you can use either the full ARN or the name of the secret. When you are using the AWS Management Console, you must specify the full ARN of the secret.
cpu (integer) --
The number of cpu units reserved for the container. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run .
This field is optional for tasks using the Fargate launch type, and the only requirement is that the total amount of CPU reserved for all containers within a task be lower than the task-level cpu value.
Note
You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.
For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that is the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task would be guaranteed a minimum of 512 CPU units when needed, and each container could float to higher CPU usage if the other container was not using it, but if both tasks were 100% active all of the time, they would be limited to 512 CPU units.
Linux containers share unallocated CPU units with other containers on the container instance with the same ratio as their allocated amount. For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that is the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task would be guaranteed a minimum of 512 CPU units when needed, and each container could float to higher CPU usage if the other container was not using it, but if both tasks were 100% active all of the time, they would be limited to 512 CPU units.
On Linux container instances, the Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. For more information, see CPU share constraint in the Docker documentation. The minimum valid CPU share value that the Linux kernel allows is 2. However, the CPU parameter is not required, and you can use CPU values below 2 in your container definitions. For CPU values below 2 (including null), the behavior varies based on your Amazon ECS container agent version:
Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to two CPU shares.
Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.
On Windows container instances, the CPU limit is enforced as an absolute limit, or a quota. Windows containers only have access to the specified amount of CPU that is described in the task definition.
memory (integer) --
The amount (in MiB) of memory to present to the container. If your container attempts to exceed the memory specified here, the container is killed. The total amount of memory reserved for all containers within a task must be lower than the task memory value, if one is specified. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run .
If your containers are part of a task using the Fargate launch type, this field is optional.
For containers that are part of a task using the EC2 launch type, you must specify a non-zero integer for one or both of memory or memoryReservation in container definitions. If you specify both, memory must be greater than memoryReservation . If you specify memoryReservation , then that value is subtracted from the available memory resources for the container instance on which the container is placed. Otherwise, the value of memory is used.
The Docker daemon reserves a minimum of 4 MiB of memory for a container, so you should not specify fewer than 4 MiB of memory for your containers.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container. When system memory is under heavy contention, Docker attempts to keep the container memory to this soft limit. However, your container can consume more memory when it needs to, up to either the hard limit specified with the memory parameter (if applicable), or all of the available memory on the container instance, whichever comes first. This parameter maps to MemoryReservation in the Create a container section of the Docker Remote API and the --memory-reservation option to docker run .
You must specify a non-zero integer for one or both of memory or memoryReservation in container definitions. If you specify both, memory must be greater than memoryReservation . If you specify memoryReservation , then that value is subtracted from the available memory resources for the container instance on which the container is placed. Otherwise, the value of memory is used.
For example, if your container normally uses 128 MiB of memory, but occasionally bursts to 256 MiB of memory for short periods of time, you can set a memoryReservation of 128 MiB, and a memory hard limit of 300 MiB. This configuration would allow the container to only reserve 128 MiB of memory from the remaining resources on the container instance, but also allow the container to consume more memory resources when needed.
The Docker daemon reserves a minimum of 4 MiB of memory for a container, so you should not specify fewer than 4 MiB of memory for your containers.
links (list) --
The links parameter allows containers to communicate with each other without the need for port mappings. This parameter is only supported if the network mode of a task definition is bridge . The name:internalName construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. For more information about linking Docker containers, go to Legacy container links in the Docker documentation. This parameter maps to Links in the Create a container section of the Docker Remote API and the --link option to docker run .
Note
This parameter is not supported for Windows containers.
Warning
Containers that are collocated on a single container instance may be able to communicate with each other without requiring links or host port mappings. Network isolation is achieved on the container instance using security groups and VPC settings.
(string) --
portMappings (list) --
The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic.
For task definitions that use the awsvpc network mode, you should only specify the containerPort . The hostPort can be left blank or it must be the same value as the containerPort .
Port mappings on Windows use the NetNAT gateway address rather than localhost . There is no loopback for port mappings on Windows, so you cannot access a container's mapped port from the host itself.
This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run . If the network mode of a task definition is set to none , then you can't specify port mappings. If the network mode of a task definition is set to host , then host ports must either be undefined or they must match the container port in the port mapping.
Note
After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the Network Bindings section of a container description for a selected task in the Amazon ECS console. The assignments are also visible in the networkBindings section DescribeTasks responses.
(dict) --
Port mappings allow containers to access ports on the host container instance to send or receive traffic. Port mappings are specified as part of the container definition.
If you are using containers in a task with the awsvpc or host network mode, exposed ports should be specified using containerPort . The hostPort can be left blank or it must be the same value as the containerPort .
After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
containerPort (integer) --
The port number on the container that is bound to the user-specified or automatically assigned host port.
If you are using containers in a task with the awsvpc or host network mode, exposed ports should be specified using containerPort .
If you are using containers in a task with the bridge network mode and you specify a container port and not a host port, your container automatically receives a host port in the ephemeral port range. For more information, see hostPort . Port mappings that are automatically assigned in this way do not count toward the 100 reserved ports limit of a container instance.
Warning
You cannot expose the same container port for multiple protocols. An error will be returned if this is attempted.
hostPort (integer) --
The port number on the container instance to reserve for your container.
If you are using containers in a task with the awsvpc or host network mode, the hostPort can either be left blank or set to the same value as the containerPort .
If you are using containers in a task with the bridge network mode, you can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0 ) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version.
The default ephemeral port range for Docker version 1.6.0 and later is listed on the instance under /proc/sys/net/ipv4/ip_local_port_range . If this kernel parameter is unavailable, the default ephemeral port range from 49153 through 65535 is used. Do not attempt to specify a host port in the ephemeral port range as these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.
Note
The default ephemeral port range from 49153 through 65535 is always used for Docker versions before 1.6.0.
The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent ports 51678-51680. Any host port that was previously specified in a running task is also reserved while the task is running (after a task stops, the host port is released). The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output. A container instance can have up to 100 reserved ports at a time, including the default reserved ports. Automatically assigned ports don't count toward the 100 reserved ports limit.
protocol (string) --
The protocol used for the port mapping. Valid values are tcp and udp . The default is tcp .
essential (boolean) --
If the essential parameter of a container is marked as true , and that container fails or stops for any reason, all other containers that are part of the task are stopped. If the essential parameter of a container is marked as false , then its failure does not affect the rest of the containers in a task. If this parameter is omitted, a container is assumed to be essential.
All tasks must have at least one essential container. If you have an application that is composed of multiple containers, you should group containers that are used for a common purpose into components, and separate the different components into multiple task definitions. For more information, see Application Architecture in the Amazon Elastic Container Service Developer Guide .
entryPoint (list) --
Warning
Early versions of the Amazon ECS container agent do not properly handle entryPoint parameters. If you have problems using entryPoint , update your container agent or enter your commands and arguments as command array items instead.
The entry point that is passed to the container. This parameter maps to Entrypoint in the Create a container section of the Docker Remote API and the --entrypoint option to docker run . For more information, see https://docs.docker.com/engine/reference/builder/#entrypoint .
(string) --
command (list) --
The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run . For more information, see https://docs.docker.com/engine/reference/builder/#cmd . If there are multiple arguments, each argument should be a separated string in the array.
(string) --
environment (list) --
The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run .
Warning
We do not recommend using plaintext environment variables for sensitive information, such as credential data.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
mountPoints (list) --
The mount points for data volumes in your container.
This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run .
Windows containers can mount whole directories on the same drive as $env:ProgramData . Windows containers cannot mount directories on a different drive, and mount point cannot be across drives.
(dict) --
Details on a volume mount point that is used in a container definition.
sourceVolume (string) --
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
containerPath (string) --
The path on the container to mount the host volume at.
readOnly (boolean) --
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. The default value is false .
volumesFrom (list) --
Data volumes to mount from another container. This parameter maps to VolumesFrom in the Create a container section of the Docker Remote API and the --volumes-from option to docker run .
(dict) --
Details on a data volume from another container in the same task definition.
sourceContainer (string) --
The name of another container within the same task definition from which to mount volumes.
readOnly (boolean) --
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. The default value is false .
linuxParameters (dict) --
Linux-specific modifications that are applied to the container, such as Linux kernel capabilities. For more information see KernelCapabilities .
Note
This parameter is not supported for Windows containers.
capabilities (dict) --
The Linux capabilities for the container that are added to or dropped from the default configuration provided by Docker.
Note
If you are using tasks that use the Fargate launch type, capabilities is supported but the add parameter is not supported.
add (list) --
The Linux capabilities for the container that have been added to the default configuration provided by Docker. This parameter maps to CapAdd in the Create a container section of the Docker Remote API and the --cap-add option to docker run .
Note
If you are using tasks that use the Fargate launch type, the add parameter is not supported.
Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
(string) --
drop (list) --
The Linux capabilities for the container that have been removed from the default configuration provided by Docker. This parameter maps to CapDrop in the Create a container section of the Docker Remote API and the --cap-drop option to docker run .
Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
(string) --
devices (list) --
Any host devices to expose to the container. This parameter maps to Devices in the Create a container section of the Docker Remote API and the --device option to docker run .
Note
If you are using tasks that use the Fargate launch type, the devices parameter is not supported.
(dict) --
An object representing a container instance host device.
hostPath (string) --
The path for the device on the host container instance.
containerPath (string) --
The path inside the container at which to expose the host device.
permissions (list) --
The explicit permissions to provide to the container for the device. By default, the container has permissions for read , write , and mknod for the device.
(string) --
initProcessEnabled (boolean) --
Run an init process inside the container that forwards signals and reaps processes. This parameter maps to the --init option to docker run . This parameter requires version 1.25 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
sharedMemorySize (integer) --
The value for the size (in MiB) of the /dev/shm volume. This parameter maps to the --shm-size option to docker run .
Note
If you are using tasks that use the Fargate launch type, the sharedMemorySize parameter is not supported.
tmpfs (list) --
The container path, mount options, and size (in MiB) of the tmpfs mount. This parameter maps to the --tmpfs option to docker run .
Note
If you are using tasks that use the Fargate launch type, the tmpfs parameter is not supported.
(dict) --
The container path, mount options, and size of the tmpfs mount.
containerPath (string) --
The absolute file path where the tmpfs volume is to be mounted.
size (integer) --
The size (in MiB) of the tmpfs volume.
mountOptions (list) --
The list of tmpfs volume mount options.
Valid values: "defaults" | "ro" | "rw" | "suid" | "nosuid" | "dev" | "nodev" | "exec" | "noexec" | "sync" | "async" | "dirsync" | "remount" | "mand" | "nomand" | "atime" | "noatime" | "diratime" | "nodiratime" | "bind" | "rbind" | "unbindable" | "runbindable" | "private" | "rprivate" | "shared" | "rshared" | "slave" | "rslave" | "relatime" | "norelatime" | "strictatime" | "nostrictatime" | "mode" | "uid" | "gid" | "nr_inodes" | "nr_blocks" | "mpol"
(string) --
maxSwap (integer) --
The total amount of swap memory (in MiB) a container can use. This parameter will be translated to the --memory-swap option to docker run where the value would be the sum of the container memory plus the maxSwap value.
If a maxSwap value of 0 is specified, the container will not use swap. Accepted values are 0 or any positive integer. If the maxSwap parameter is omitted, the container will use the swap configuration for the container instance it is running on. A maxSwap value must be set for the swappiness parameter to be used.
Note
If you are using tasks that use the Fargate launch type, the maxSwap parameter is not supported.
swappiness (integer) --
This allows you to tune a container's memory swappiness behavior. A swappiness value of 0 will cause swapping to not happen unless absolutely necessary. A swappiness value of 100 will cause pages to be swapped very aggressively. Accepted values are whole numbers between 0 and 100 . If the swappiness parameter is not specified, a default value of 60 is used. If a value is not specified for maxSwap then this parameter is ignored. This parameter maps to the --memory-swappiness option to docker run .
Note
If you are using tasks that use the Fargate launch type, the swappiness parameter is not supported.
secrets (list) --
The secrets to pass to the container. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
(dict) --
An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:
To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.
To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.
For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
name (string) --
The name of the secret.
valueFrom (string) --
The secret to expose to the container. The supported values are either the full ARN of the AWS Secrets Manager secret or the full ARN of the parameter in the AWS Systems Manager Parameter Store.
Note
If the AWS Systems Manager Parameter Store parameter exists in the same Region as the task you are launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.
dependsOn (list) --
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies. When a dependency is defined for container startup, for container shutdown it is reversed.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent to enable container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
(dict) --
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies. When a dependency is defined for container startup, for container shutdown it is reversed.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent to enable container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
Note
If you are using tasks that use the Fargate launch type, container dependency parameters are not supported.
containerName (string) --
The name of a container.
condition (string) --
The dependency condition of the container. The following are the available conditions and their behavior:
START - This condition emulates the behavior of links and volumes today. It validates that a dependent container is started before permitting other containers to start.
COMPLETE - This condition validates that a dependent container runs to completion (exits) before permitting other containers to start. This can be useful for nonessential containers that run a script and then exit.
SUCCESS - This condition is the same as COMPLETE , but it also requires that the container exits with a zero status.
HEALTHY - This condition validates that the dependent container passes its Docker health check before permitting other containers to start. This requires that the dependent container has health checks configured. This condition is confirmed only at task startup.
startTimeout (integer) --
Time duration (in seconds) to wait before giving up on resolving dependencies for a container. For example, you specify two containers in a task definition with containerA having a dependency on containerB reaching a COMPLETE , SUCCESS , or HEALTHY status. If a startTimeout value is specified for containerB and it does not reach the desired status within that time then containerA will give up and not start. This results in the task transitioning to a STOPPED state.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent to enable a container start timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
stopTimeout (integer) --
Time duration (in seconds) to wait before the container is forcefully killed if it doesn't exit normally on its own. For tasks using the Fargate launch type, the max stopTimeout value is 2 minutes. This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
For tasks using the EC2 launch type, the stop timeout value for the container takes precedence over the ECS_CONTAINER_STOP_TIMEOUT container agent configuration parameter, if used. Container instances require at least version 1.26.0 of the container agent to enable a container stop timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
hostname (string) --
The hostname to use for your container. This parameter maps to Hostname in the Create a container section of the Docker Remote API and the --hostname option to docker run .
Note
The hostname parameter is not supported if you are using the awsvpc network mode.
user (string) --
The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run .
You can use the following formats. If specifying a UID or GID, you must specify it as a positive integer.
user
user:group
uid
uid:gid
user:gid
uid:group
Note
This parameter is not supported for Windows containers.
workingDirectory (string) --
The working directory in which to run commands inside the container. This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run .
disableNetworking (boolean) --
When this parameter is true, networking is disabled within the container. This parameter maps to NetworkDisabled in the Create a container section of the Docker Remote API .
Note
This parameter is not supported for Windows containers.
privileged (boolean) --
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run .
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
readonlyRootFilesystem (boolean) --
When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run .
Note
This parameter is not supported for Windows containers.
dnsServers (list) --
A list of DNS servers that are presented to the container. This parameter maps to Dns in the Create a container section of the Docker Remote API and the --dns option to docker run .
Note
This parameter is not supported for Windows containers.
(string) --
dnsSearchDomains (list) --
A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run .
Note
This parameter is not supported for Windows containers.
(string) --
extraHosts (list) --
A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the Create a container section of the Docker Remote API and the --add-host option to docker run .
Note
This parameter is not supported for Windows containers or tasks that use the awsvpc network mode.
(dict) --
Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition .
hostname (string) --
The hostname to use in the /etc/hosts entry.
ipAddress (string) --
The IP address to use in the /etc/hosts entry.
dockerSecurityOptions (list) --
A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. This field is not valid for containers in tasks using the Fargate launch type.
This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run .
Note
The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide .
Note
This parameter is not supported for Windows containers.
(string) --
interactive (boolean) --
When this parameter is true , this allows you to deploy containerized applications that require stdin or a tty to be allocated. This parameter maps to OpenStdin in the Create a container section of the Docker Remote API and the --interactive option to docker run .
pseudoTerminal (boolean) --
When this parameter is true , a TTY is allocated. This parameter maps to Tty in the Create a container section of the Docker Remote API and the --tty option to docker run .
dockerLabels (dict) --
A key/value map of labels to add to the container. This parameter maps to Labels in the Create a container section of the Docker Remote API and the --label option to docker run . This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
(string) --
(string) --
ulimits (list) --
A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run . Valid naming values are displayed in the Ulimit data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
Note
This parameter is not supported for Windows containers.
(dict) --
The ulimit settings to pass to the container.
name (string) --
The type of the ulimit .
softLimit (integer) --
The soft limit for the ulimit type.
hardLimit (integer) --
The hard limit for the ulimit type.
logConfiguration (dict) --
The log configuration specification for the container.
This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run . By default, containers use the same logging driver that the Docker daemon uses. However the container may use a different logging driver than the Docker daemon by specifying a log driver with this parameter in the container definition. To use a different logging driver for a container, the log system must be configured properly on the container instance (or on a different log server for remote logging options). For more information on the options for different supported log drivers, see Configure logging drivers in the Docker documentation.
Note
Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon (shown in the LogConfiguration data type). Additional log drivers may be available in future releases of the Amazon ECS container agent.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
Note
The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide .
logDriver (string) --
The log driver to use for the container. The valid values listed for this parameter are log drivers that the Amazon ECS container agent can communicate with by default.
For tasks using the Fargate launch type, the supported log drivers are awslogs and splunk .
For tasks using the EC2 launch type, the supported log drivers are awslogs , fluentd , gelf , json-file , journald , logentries , syslog , splunk , and syslog .
For more information about using the awslogs log driver, see Using the awslogs Log Driver in the Amazon Elastic Container Service Developer Guide .
Note
If you have a custom driver that is not listed above that you would like to work with the Amazon ECS container agent, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, Amazon Web Services does not currently support running modified copies of this software.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
options (dict) --
The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
(string) --
(string) --
secretOptions (list) --
The secrets to pass to the log configuration.
(dict) --
An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:
To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.
To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.
For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
name (string) --
The name of the secret.
valueFrom (string) --
The secret to expose to the container. The supported values are either the full ARN of the AWS Secrets Manager secret or the full ARN of the parameter in the AWS Systems Manager Parameter Store.
Note
If the AWS Systems Manager Parameter Store parameter exists in the same Region as the task you are launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.
healthCheck (dict) --
The health check command and associated configuration parameters for the container. This parameter maps to HealthCheck in the Create a container section of the Docker Remote API and the HEALTHCHECK parameter of docker run .
command (list) --
A string array representing the command that the container runs to determine if it is healthy. The string array must start with CMD to execute the command arguments directly, or CMD-SHELL to run the command with the container's default shell. For example:
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see HealthCheck in the Create a container section of the Docker Remote API .
(string) --
interval (integer) --
The time period in seconds between each health check execution. You may specify between 5 and 300 seconds. The default value is 30 seconds.
timeout (integer) --
The time period in seconds to wait for a health check to succeed before it is considered a failure. You may specify between 2 and 60 seconds. The default value is 5.
retries (integer) --
The number of times to retry a failed health check before the container is considered unhealthy. You may specify between 1 and 10 retries. The default value is 3.
startPeriod (integer) --
The optional grace period within which to provide containers time to bootstrap before failed health checks count towards the maximum number of retries. You may specify between 0 and 300 seconds. The startPeriod is disabled by default.
Note
If a health check succeeds within the startPeriod , then the container is considered healthy and any subsequent failures count toward the maximum number of retries.
systemControls (list) --
A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run .
Note
It is not recommended that you specify network-related systemControls parameters for multiple containers in a single task that also uses either the awsvpc or host network modes. For tasks that use the awsvpc network mode, the container that is started last determines which systemControls parameters take effect. For tasks that use the host network mode, it changes the container instance's namespaced kernel parameters as well as the containers.
(dict) --
A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run .
It is not recommended that you specify network-related systemControls parameters for multiple containers in a single task that also uses either the awsvpc or host network mode for the following reasons:
For tasks that use the awsvpc network mode, if you set systemControls for any container, it applies to all containers in the task. If you set different systemControls for multiple containers in a single task, the container that is started last determines which systemControls take effect.
For tasks that use the host network mode, the systemControls parameter applies to the container instance's kernel parameter as well as that of all containers of any tasks running on that container instance.
namespace (string) --
The namespaced kernel parameter for which to set a value .
value (string) --
The value for the namespaced kernel parameter specified in namespace .
resourceRequirements (list) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) --
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) --
The type of resource to assign to a container. The only supported value is GPU .
firelensConfiguration (dict) --
The FireLens configuration for the container. This is used to specify and configure a log router for container logs.
type (string) --
The log router to use. The valid values are fluentd or fluentbit .
options (dict) --
The options to use when configuring the log router. This field is optional and can be used to add additional metadata, such as the task, task definition, cluster, and container instance details to the log event. If specified, the syntax to use is "options":{"enable-ecs-log-metadata":"true|false"} .
(string) --
(string) --
family (string) --
The name of a family that this task definition is registered to. A family groups multiple versions of a task definition. Amazon ECS gives the first task definition that you registered to a family a revision number of 1. Amazon ECS gives sequential revision numbers to each task definition that you add.
taskRoleArn (string) --
The short name or full Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that grants containers in the task permission to call AWS APIs on your behalf. For more information, see Amazon ECS Task Role in the Amazon Elastic Container Service Developer Guide .
IAM roles for tasks on Windows require that the -EnableTaskIAMRole option is set when you launch the Amazon ECS-optimized Windows AMI. Your containers must also run some configuration code in order to take advantage of the feature. For more information, see Windows IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide .
executionRoleArn (string) --
The Amazon Resource Name (ARN) of the task execution role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role.
networkMode (string) --
The Docker networking mode to use for the containers in the task. The valid values are none , bridge , awsvpc , and host . The default Docker network mode is bridge . If you are using the Fargate launch type, the awsvpc network mode is required. If you are using the EC2 launch type, any network mode can be used. If the network mode is set to none , you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The host and awsvpc network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the bridge mode.
With the host and awsvpc network modes, exposed container ports are mapped directly to the corresponding host port (for the host network mode) or the attached elastic network interface port (for the awsvpc network mode), so you cannot take advantage of dynamic host port mappings.
If the network mode is awsvpc , the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide .
Note
Currently, only Amazon ECS-optimized AMIs, other Amazon Linux variants with the ecs-init package, or AWS Fargate infrastructure support the awsvpc network mode.
If the network mode is host , you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.
Docker for Windows uses different network modes than Docker for Linux. When you register a task definition with Windows containers, you must not specify a network mode. If you use the console to register a task definition with Windows containers, you must choose the <default> network mode object.
For more information, see Network settings in the Docker run reference .
revision (integer) --
The revision of the task in a particular family. The revision is a version number of a task definition in a family. When you register a task definition for the first time, the revision is 1 . Each time that you register a new revision of a task definition in the same family, the revision value always increases by one, even if you have deregistered previous revisions in this family.
volumes (list) --
The list of volume definitions for the task.
If your tasks are using the Fargate launch type, the host and sourcePath parameters are not supported.
For more information about volume definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide .
(dict) --
A data volume used in a task definition. For tasks that use a Docker volume, specify a DockerVolumeConfiguration . For tasks that use a bind mount host volume, specify a host and optional sourcePath . For more information, see Using Data Volumes in Tasks .
name (string) --
The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. This name is referenced in the sourceVolume parameter of container definition mountPoints .
host (dict) --
This parameter is specified when you are using bind mount host volumes. Bind mount host volumes are supported when you are using either the EC2 or Fargate launch types. The contents of the host parameter determine whether your bind mount host volume persists on the host container instance and where it is stored. If the host parameter is empty, then the Docker daemon assigns a host path for your data volume. However, the data is not guaranteed to persist after the containers associated with it stop running.
Windows containers can mount whole directories on the same drive as $env:ProgramData . Windows containers cannot mount directories on a different drive, and mount point cannot be across drives. For example, you can mount C:\my\path:C:\my\path and D:\:D:\ , but not D:\my\path:C:\my\path or D:\:C:\my\path .
sourcePath (string) --
When the host parameter is used, specify a sourcePath to declare the path on the host container instance that is presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you. If the host parameter contains a sourcePath file location, then the data volume persists at the specified location on the host container instance until you delete it manually. If the sourcePath value does not exist on the host container instance, the Docker daemon creates it. If the location does exist, the contents of the source path folder are exported.
If you are using the Fargate launch type, the sourcePath parameter is not supported.
dockerVolumeConfiguration (dict) --
This parameter is specified when you are using Docker volumes. Docker volumes are only supported when you are using the EC2 launch type. Windows containers only support the use of the local driver. To use bind mounts, specify a host instead.
scope (string) --
The scope for the Docker volume that determines its lifecycle. Docker volumes that are scoped to a task are automatically provisioned when the task starts and destroyed when the task stops. Docker volumes that are scoped as shared persist after the task stops.
autoprovision (boolean) --
If this value is true , the Docker volume is created if it does not already exist.
Note
This field is only used if the scope is shared .
driver (string) --
The Docker volume driver to use. The driver value must match the driver name provided by Docker because it is used for task placement. If the driver was installed using the Docker plugin CLI, use docker plugin ls to retrieve the driver name from your container instance. If the driver was installed using another method, use Docker plugin discovery to retrieve the driver name. For more information, see Docker plugin discovery . This parameter maps to Driver in the Create a volume section of the Docker Remote API and the xxdriver option to docker volume create .
driverOpts (dict) --
A map of Docker driver-specific options passed through. This parameter maps to DriverOpts in the Create a volume section of the Docker Remote API and the xxopt option to docker volume create .
(string) --
(string) --
labels (dict) --
Custom metadata to add to your Docker volume. This parameter maps to Labels in the Create a volume section of the Docker Remote API and the xxlabel option to docker volume create .
(string) --
(string) --
status (string) --
The status of the task definition.
requiresAttributes (list) --
The container instance attributes required by your task. This field is not valid if you are using the Fargate launch type for your task.
(dict) --
An attribute is a name-value pair associated with an Amazon ECS object. Attributes enable you to extend the Amazon ECS data model by adding custom metadata to your resources. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide .
name (string) --
The name of the attribute. Up to 128 letters (uppercase and lowercase), numbers, hyphens, underscores, and periods are allowed.
value (string) --
The value of the attribute. Up to 128 letters (uppercase and lowercase), numbers, hyphens, underscores, periods, at signs (@), forward slashes, colons, and spaces are allowed.
targetType (string) --
The type of the target with which to attach the attribute. This parameter is required if you use the short form ID for a resource instead of the full ARN.
targetId (string) --
The ID of the target. You can specify the short form ID for a resource or the full Amazon Resource Name (ARN).
placementConstraints (list) --
An array of placement constraint objects to use for tasks. This field is not valid if you are using the Fargate launch type for your task.
(dict) --
An object representing a constraint on task placement in the task definition.
If you are using the Fargate launch type, task placement constraints are not supported.
For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of constraint. The DistinctInstance constraint ensures that each task in a particular group is running on a different container instance. The MemberOf constraint restricts selection to be from a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
compatibilities (list) --
The launch type to use with your task. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
(string) --
requiresCompatibilities (list) --
The launch type the task requires. If no value is specified, it will default to EC2 . Valid values include EC2 and FARGATE .
(string) --
cpu (string) --
The number of cpu units used by the task. If you are using the EC2 launch type, this field is optional and any value can be used. If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of valid values for the memory parameter:
256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)
512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)
1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
2048 (2 vCPU) - Available memory values: Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)
4096 (4 vCPU) - Available memory values: Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)
memory (string) --
The amount (in MiB) of memory used by the task. If using the EC2 launch type, this field is optional and any value can be used. If using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of valid values for the cpu parameter:
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)
pidMode (string) --
The process namespace to use for the containers in the task. The valid values are host or task . If host is specified, then all containers within the tasks that specified the host PID mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same process namespace. If no value is specified, the default is a private namespace. For more information, see PID settings in the Docker run reference .
If the host PID mode is used, be aware that there is a heightened risk of undesired process namespace expose. For more information, see Docker security .
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
ipcMode (string) --
The IPC resource namespace to use for the containers in the task. The valid values are host , task , or none . If host is specified, then all containers within the tasks that specified the host IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same IPC resources. If none is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. For more information, see IPC settings in the Docker run reference .
If the host IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. For more information, see Docker security .
If you are setting namespaced kernel parameters using systemControls for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide .
For tasks that use the host IPC mode, IPC namespace related systemControls are not supported.
For tasks that use the task IPC mode, IPC namespace related systemControls will apply to all containers within a task.
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
proxyConfiguration (dict) --
The configuration details for the App Mesh proxy.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent and at least version 1.26.0-1 of the ecs-init package to enable a proxy configuration. If your container instances are launched from the Amazon ECS-optimized AMI version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
type (string) --
The proxy type. The only supported value is APPMESH .
containerName (string) --
The name of the container that will serve as the App Mesh proxy.
properties (list) --
The set of network configuration parameters to provide the Container Network Interface (CNI) plugin, specified as key-value pairs.
IgnoredUID - (Required) The user ID (UID) of the proxy container as defined by the user parameter in a container definition. This is used to ensure the proxy ignores its own traffic. If IgnoredGID is specified, this field can be empty.
IgnoredGID - (Required) The group ID (GID) of the proxy container as defined by the user parameter in a container definition. This is used to ensure the proxy ignores its own traffic. If IgnoredUID is specified, this field can be empty.
AppPorts - (Required) The list of ports that the application uses. Network traffic to these ports is forwarded to the ProxyIngressPort and ProxyEgressPort .
ProxyIngressPort - (Required) Specifies the port that incoming traffic to the AppPorts is directed to.
ProxyEgressPort - (Required) Specifies the port that outgoing traffic from the AppPorts is directed to.
EgressIgnoredPorts - (Required) The egress traffic going to the specified ports is ignored and not redirected to the ProxyEgressPort . It can be an empty list.
EgressIgnoredIPs - (Required) The egress traffic going to the specified IP addresses is ignored and not redirected to the ProxyEgressPort . It can be an empty list.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
{'taskDefinition': {'containerDefinitions': {'firelensConfiguration': {'options': {'string': 'string'},
'type': 'fluentd '
'| '
'fluentbit'},
'logConfiguration': {'logDriver': ['awsfirelens']}}}}
Describes a task definition. You can specify a family and revision to find information about a specific task definition, or you can simply specify the family to find the latest ACTIVE revision in that family.
Note
You can only describe INACTIVE task definitions while an active task or service references them.
See also: AWS API Documentation
Request Syntax
client.describe_task_definition(
taskDefinition='string',
include=[
'TAGS',
]
)
string
[REQUIRED]
The family for the latest ACTIVE revision, family and revision (family:revision ) for a specific revision in the family, or full Amazon Resource Name (ARN) of the task definition to describe.
list
Specifies whether to see the resource tags for the task definition. If TAGS is specified, the tags are included in the response. If this field is omitted, tags are not included in the response.
(string) --
dict
Response Syntax
{
'taskDefinition': {
'taskDefinitionArn': 'string',
'containerDefinitions': [
{
'name': 'string',
'image': 'string',
'repositoryCredentials': {
'credentialsParameter': 'string'
},
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'links': [
'string',
],
'portMappings': [
{
'containerPort': 123,
'hostPort': 123,
'protocol': 'tcp'|'udp'
},
],
'essential': True|False,
'entryPoint': [
'string',
],
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'mountPoints': [
{
'sourceVolume': 'string',
'containerPath': 'string',
'readOnly': True|False
},
],
'volumesFrom': [
{
'sourceContainer': 'string',
'readOnly': True|False
},
],
'linuxParameters': {
'capabilities': {
'add': [
'string',
],
'drop': [
'string',
]
},
'devices': [
{
'hostPath': 'string',
'containerPath': 'string',
'permissions': [
'read'|'write'|'mknod',
]
},
],
'initProcessEnabled': True|False,
'sharedMemorySize': 123,
'tmpfs': [
{
'containerPath': 'string',
'size': 123,
'mountOptions': [
'string',
]
},
],
'maxSwap': 123,
'swappiness': 123
},
'secrets': [
{
'name': 'string',
'valueFrom': 'string'
},
],
'dependsOn': [
{
'containerName': 'string',
'condition': 'START'|'COMPLETE'|'SUCCESS'|'HEALTHY'
},
],
'startTimeout': 123,
'stopTimeout': 123,
'hostname': 'string',
'user': 'string',
'workingDirectory': 'string',
'disableNetworking': True|False,
'privileged': True|False,
'readonlyRootFilesystem': True|False,
'dnsServers': [
'string',
],
'dnsSearchDomains': [
'string',
],
'extraHosts': [
{
'hostname': 'string',
'ipAddress': 'string'
},
],
'dockerSecurityOptions': [
'string',
],
'interactive': True|False,
'pseudoTerminal': True|False,
'dockerLabels': {
'string': 'string'
},
'ulimits': [
{
'name': 'core'|'cpu'|'data'|'fsize'|'locks'|'memlock'|'msgqueue'|'nice'|'nofile'|'nproc'|'rss'|'rtprio'|'rttime'|'sigpending'|'stack',
'softLimit': 123,
'hardLimit': 123
},
],
'logConfiguration': {
'logDriver': 'json-file'|'syslog'|'journald'|'gelf'|'fluentd'|'awslogs'|'splunk'|'awsfirelens',
'options': {
'string': 'string'
},
'secretOptions': [
{
'name': 'string',
'valueFrom': 'string'
},
]
},
'healthCheck': {
'command': [
'string',
],
'interval': 123,
'timeout': 123,
'retries': 123,
'startPeriod': 123
},
'systemControls': [
{
'namespace': 'string',
'value': 'string'
},
],
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
],
'firelensConfiguration': {
'type': 'fluentd'|'fluentbit',
'options': {
'string': 'string'
}
}
},
],
'family': 'string',
'taskRoleArn': 'string',
'executionRoleArn': 'string',
'networkMode': 'bridge'|'host'|'awsvpc'|'none',
'revision': 123,
'volumes': [
{
'name': 'string',
'host': {
'sourcePath': 'string'
},
'dockerVolumeConfiguration': {
'scope': 'task'|'shared',
'autoprovision': True|False,
'driver': 'string',
'driverOpts': {
'string': 'string'
},
'labels': {
'string': 'string'
}
}
},
],
'status': 'ACTIVE'|'INACTIVE',
'requiresAttributes': [
{
'name': 'string',
'value': 'string',
'targetType': 'container-instance',
'targetId': 'string'
},
],
'placementConstraints': [
{
'type': 'memberOf',
'expression': 'string'
},
],
'compatibilities': [
'EC2'|'FARGATE',
],
'requiresCompatibilities': [
'EC2'|'FARGATE',
],
'cpu': 'string',
'memory': 'string',
'pidMode': 'host'|'task',
'ipcMode': 'host'|'task'|'none',
'proxyConfiguration': {
'type': 'APPMESH',
'containerName': 'string',
'properties': [
{
'name': 'string',
'value': 'string'
},
]
}
},
'tags': [
{
'key': 'string',
'value': 'string'
},
]
}
Response Structure
(dict) --
taskDefinition (dict) --
The full task definition description.
taskDefinitionArn (string) --
The full Amazon Resource Name (ARN) of the task definition.
containerDefinitions (list) --
A list of container definitions in JSON format that describe the different containers that make up your task. For more information about container definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide .
(dict) --
Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
name (string) --
The name of a container. If you are linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. This parameter maps to name in the Create a container section of the Docker Remote API and the --name option to docker run .
image (string) --
The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with either `` repository-url /image :tag `` or `` repository-url /image @*digest* `` . Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run .
When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image are not propagated to already running tasks.
Images in Amazon ECR repositories can be specified by either using the full registry/repository:tag or registry/repository@digest . For example, 012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>:latest or 012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE .
Images in official repositories on Docker Hub use a single name (for example, ubuntu or mongo ).
Images in other repositories on Docker Hub are qualified with an organization name (for example, amazon/amazon-ecs-agent ).
Images in other online repositories are qualified further by a domain name (for example, quay.io/assemblyline/ubuntu ).
repositoryCredentials (dict) --
The private repository authentication credentials to use.
credentialsParameter (string) --
The Amazon Resource Name (ARN) of the secret containing the private repository credentials.
Note
When you are using the Amazon ECS API, AWS CLI, or AWS SDK, if the secret exists in the same Region as the task that you are launching then you can use either the full ARN or the name of the secret. When you are using the AWS Management Console, you must specify the full ARN of the secret.
cpu (integer) --
The number of cpu units reserved for the container. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run .
This field is optional for tasks using the Fargate launch type, and the only requirement is that the total amount of CPU reserved for all containers within a task be lower than the task-level cpu value.
Note
You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.
For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that is the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task would be guaranteed a minimum of 512 CPU units when needed, and each container could float to higher CPU usage if the other container was not using it, but if both tasks were 100% active all of the time, they would be limited to 512 CPU units.
Linux containers share unallocated CPU units with other containers on the container instance with the same ratio as their allocated amount. For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that is the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task would be guaranteed a minimum of 512 CPU units when needed, and each container could float to higher CPU usage if the other container was not using it, but if both tasks were 100% active all of the time, they would be limited to 512 CPU units.
On Linux container instances, the Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. For more information, see CPU share constraint in the Docker documentation. The minimum valid CPU share value that the Linux kernel allows is 2. However, the CPU parameter is not required, and you can use CPU values below 2 in your container definitions. For CPU values below 2 (including null), the behavior varies based on your Amazon ECS container agent version:
Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to two CPU shares.
Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.
On Windows container instances, the CPU limit is enforced as an absolute limit, or a quota. Windows containers only have access to the specified amount of CPU that is described in the task definition.
memory (integer) --
The amount (in MiB) of memory to present to the container. If your container attempts to exceed the memory specified here, the container is killed. The total amount of memory reserved for all containers within a task must be lower than the task memory value, if one is specified. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run .
If your containers are part of a task using the Fargate launch type, this field is optional.
For containers that are part of a task using the EC2 launch type, you must specify a non-zero integer for one or both of memory or memoryReservation in container definitions. If you specify both, memory must be greater than memoryReservation . If you specify memoryReservation , then that value is subtracted from the available memory resources for the container instance on which the container is placed. Otherwise, the value of memory is used.
The Docker daemon reserves a minimum of 4 MiB of memory for a container, so you should not specify fewer than 4 MiB of memory for your containers.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container. When system memory is under heavy contention, Docker attempts to keep the container memory to this soft limit. However, your container can consume more memory when it needs to, up to either the hard limit specified with the memory parameter (if applicable), or all of the available memory on the container instance, whichever comes first. This parameter maps to MemoryReservation in the Create a container section of the Docker Remote API and the --memory-reservation option to docker run .
You must specify a non-zero integer for one or both of memory or memoryReservation in container definitions. If you specify both, memory must be greater than memoryReservation . If you specify memoryReservation , then that value is subtracted from the available memory resources for the container instance on which the container is placed. Otherwise, the value of memory is used.
For example, if your container normally uses 128 MiB of memory, but occasionally bursts to 256 MiB of memory for short periods of time, you can set a memoryReservation of 128 MiB, and a memory hard limit of 300 MiB. This configuration would allow the container to only reserve 128 MiB of memory from the remaining resources on the container instance, but also allow the container to consume more memory resources when needed.
The Docker daemon reserves a minimum of 4 MiB of memory for a container, so you should not specify fewer than 4 MiB of memory for your containers.
links (list) --
The links parameter allows containers to communicate with each other without the need for port mappings. This parameter is only supported if the network mode of a task definition is bridge . The name:internalName construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. For more information about linking Docker containers, go to Legacy container links in the Docker documentation. This parameter maps to Links in the Create a container section of the Docker Remote API and the --link option to docker run .
Note
This parameter is not supported for Windows containers.
Warning
Containers that are collocated on a single container instance may be able to communicate with each other without requiring links or host port mappings. Network isolation is achieved on the container instance using security groups and VPC settings.
(string) --
portMappings (list) --
The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic.
For task definitions that use the awsvpc network mode, you should only specify the containerPort . The hostPort can be left blank or it must be the same value as the containerPort .
Port mappings on Windows use the NetNAT gateway address rather than localhost . There is no loopback for port mappings on Windows, so you cannot access a container's mapped port from the host itself.
This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run . If the network mode of a task definition is set to none , then you can't specify port mappings. If the network mode of a task definition is set to host , then host ports must either be undefined or they must match the container port in the port mapping.
Note
After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the Network Bindings section of a container description for a selected task in the Amazon ECS console. The assignments are also visible in the networkBindings section DescribeTasks responses.
(dict) --
Port mappings allow containers to access ports on the host container instance to send or receive traffic. Port mappings are specified as part of the container definition.
If you are using containers in a task with the awsvpc or host network mode, exposed ports should be specified using containerPort . The hostPort can be left blank or it must be the same value as the containerPort .
After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
containerPort (integer) --
The port number on the container that is bound to the user-specified or automatically assigned host port.
If you are using containers in a task with the awsvpc or host network mode, exposed ports should be specified using containerPort .
If you are using containers in a task with the bridge network mode and you specify a container port and not a host port, your container automatically receives a host port in the ephemeral port range. For more information, see hostPort . Port mappings that are automatically assigned in this way do not count toward the 100 reserved ports limit of a container instance.
Warning
You cannot expose the same container port for multiple protocols. An error will be returned if this is attempted.
hostPort (integer) --
The port number on the container instance to reserve for your container.
If you are using containers in a task with the awsvpc or host network mode, the hostPort can either be left blank or set to the same value as the containerPort .
If you are using containers in a task with the bridge network mode, you can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0 ) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version.
The default ephemeral port range for Docker version 1.6.0 and later is listed on the instance under /proc/sys/net/ipv4/ip_local_port_range . If this kernel parameter is unavailable, the default ephemeral port range from 49153 through 65535 is used. Do not attempt to specify a host port in the ephemeral port range as these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.
Note
The default ephemeral port range from 49153 through 65535 is always used for Docker versions before 1.6.0.
The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent ports 51678-51680. Any host port that was previously specified in a running task is also reserved while the task is running (after a task stops, the host port is released). The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output. A container instance can have up to 100 reserved ports at a time, including the default reserved ports. Automatically assigned ports don't count toward the 100 reserved ports limit.
protocol (string) --
The protocol used for the port mapping. Valid values are tcp and udp . The default is tcp .
essential (boolean) --
If the essential parameter of a container is marked as true , and that container fails or stops for any reason, all other containers that are part of the task are stopped. If the essential parameter of a container is marked as false , then its failure does not affect the rest of the containers in a task. If this parameter is omitted, a container is assumed to be essential.
All tasks must have at least one essential container. If you have an application that is composed of multiple containers, you should group containers that are used for a common purpose into components, and separate the different components into multiple task definitions. For more information, see Application Architecture in the Amazon Elastic Container Service Developer Guide .
entryPoint (list) --
Warning
Early versions of the Amazon ECS container agent do not properly handle entryPoint parameters. If you have problems using entryPoint , update your container agent or enter your commands and arguments as command array items instead.
The entry point that is passed to the container. This parameter maps to Entrypoint in the Create a container section of the Docker Remote API and the --entrypoint option to docker run . For more information, see https://docs.docker.com/engine/reference/builder/#entrypoint .
(string) --
command (list) --
The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run . For more information, see https://docs.docker.com/engine/reference/builder/#cmd . If there are multiple arguments, each argument should be a separated string in the array.
(string) --
environment (list) --
The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run .
Warning
We do not recommend using plaintext environment variables for sensitive information, such as credential data.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
mountPoints (list) --
The mount points for data volumes in your container.
This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run .
Windows containers can mount whole directories on the same drive as $env:ProgramData . Windows containers cannot mount directories on a different drive, and mount point cannot be across drives.
(dict) --
Details on a volume mount point that is used in a container definition.
sourceVolume (string) --
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
containerPath (string) --
The path on the container to mount the host volume at.
readOnly (boolean) --
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. The default value is false .
volumesFrom (list) --
Data volumes to mount from another container. This parameter maps to VolumesFrom in the Create a container section of the Docker Remote API and the --volumes-from option to docker run .
(dict) --
Details on a data volume from another container in the same task definition.
sourceContainer (string) --
The name of another container within the same task definition from which to mount volumes.
readOnly (boolean) --
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. The default value is false .
linuxParameters (dict) --
Linux-specific modifications that are applied to the container, such as Linux kernel capabilities. For more information see KernelCapabilities .
Note
This parameter is not supported for Windows containers.
capabilities (dict) --
The Linux capabilities for the container that are added to or dropped from the default configuration provided by Docker.
Note
If you are using tasks that use the Fargate launch type, capabilities is supported but the add parameter is not supported.
add (list) --
The Linux capabilities for the container that have been added to the default configuration provided by Docker. This parameter maps to CapAdd in the Create a container section of the Docker Remote API and the --cap-add option to docker run .
Note
If you are using tasks that use the Fargate launch type, the add parameter is not supported.
Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
(string) --
drop (list) --
The Linux capabilities for the container that have been removed from the default configuration provided by Docker. This parameter maps to CapDrop in the Create a container section of the Docker Remote API and the --cap-drop option to docker run .
Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
(string) --
devices (list) --
Any host devices to expose to the container. This parameter maps to Devices in the Create a container section of the Docker Remote API and the --device option to docker run .
Note
If you are using tasks that use the Fargate launch type, the devices parameter is not supported.
(dict) --
An object representing a container instance host device.
hostPath (string) --
The path for the device on the host container instance.
containerPath (string) --
The path inside the container at which to expose the host device.
permissions (list) --
The explicit permissions to provide to the container for the device. By default, the container has permissions for read , write , and mknod for the device.
(string) --
initProcessEnabled (boolean) --
Run an init process inside the container that forwards signals and reaps processes. This parameter maps to the --init option to docker run . This parameter requires version 1.25 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
sharedMemorySize (integer) --
The value for the size (in MiB) of the /dev/shm volume. This parameter maps to the --shm-size option to docker run .
Note
If you are using tasks that use the Fargate launch type, the sharedMemorySize parameter is not supported.
tmpfs (list) --
The container path, mount options, and size (in MiB) of the tmpfs mount. This parameter maps to the --tmpfs option to docker run .
Note
If you are using tasks that use the Fargate launch type, the tmpfs parameter is not supported.
(dict) --
The container path, mount options, and size of the tmpfs mount.
containerPath (string) --
The absolute file path where the tmpfs volume is to be mounted.
size (integer) --
The size (in MiB) of the tmpfs volume.
mountOptions (list) --
The list of tmpfs volume mount options.
Valid values: "defaults" | "ro" | "rw" | "suid" | "nosuid" | "dev" | "nodev" | "exec" | "noexec" | "sync" | "async" | "dirsync" | "remount" | "mand" | "nomand" | "atime" | "noatime" | "diratime" | "nodiratime" | "bind" | "rbind" | "unbindable" | "runbindable" | "private" | "rprivate" | "shared" | "rshared" | "slave" | "rslave" | "relatime" | "norelatime" | "strictatime" | "nostrictatime" | "mode" | "uid" | "gid" | "nr_inodes" | "nr_blocks" | "mpol"
(string) --
maxSwap (integer) --
The total amount of swap memory (in MiB) a container can use. This parameter will be translated to the --memory-swap option to docker run where the value would be the sum of the container memory plus the maxSwap value.
If a maxSwap value of 0 is specified, the container will not use swap. Accepted values are 0 or any positive integer. If the maxSwap parameter is omitted, the container will use the swap configuration for the container instance it is running on. A maxSwap value must be set for the swappiness parameter to be used.
Note
If you are using tasks that use the Fargate launch type, the maxSwap parameter is not supported.
swappiness (integer) --
This allows you to tune a container's memory swappiness behavior. A swappiness value of 0 will cause swapping to not happen unless absolutely necessary. A swappiness value of 100 will cause pages to be swapped very aggressively. Accepted values are whole numbers between 0 and 100 . If the swappiness parameter is not specified, a default value of 60 is used. If a value is not specified for maxSwap then this parameter is ignored. This parameter maps to the --memory-swappiness option to docker run .
Note
If you are using tasks that use the Fargate launch type, the swappiness parameter is not supported.
secrets (list) --
The secrets to pass to the container. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
(dict) --
An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:
To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.
To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.
For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
name (string) --
The name of the secret.
valueFrom (string) --
The secret to expose to the container. The supported values are either the full ARN of the AWS Secrets Manager secret or the full ARN of the parameter in the AWS Systems Manager Parameter Store.
Note
If the AWS Systems Manager Parameter Store parameter exists in the same Region as the task you are launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.
dependsOn (list) --
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies. When a dependency is defined for container startup, for container shutdown it is reversed.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent to enable container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
(dict) --
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies. When a dependency is defined for container startup, for container shutdown it is reversed.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent to enable container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
Note
If you are using tasks that use the Fargate launch type, container dependency parameters are not supported.
containerName (string) --
The name of a container.
condition (string) --
The dependency condition of the container. The following are the available conditions and their behavior:
START - This condition emulates the behavior of links and volumes today. It validates that a dependent container is started before permitting other containers to start.
COMPLETE - This condition validates that a dependent container runs to completion (exits) before permitting other containers to start. This can be useful for nonessential containers that run a script and then exit.
SUCCESS - This condition is the same as COMPLETE , but it also requires that the container exits with a zero status.
HEALTHY - This condition validates that the dependent container passes its Docker health check before permitting other containers to start. This requires that the dependent container has health checks configured. This condition is confirmed only at task startup.
startTimeout (integer) --
Time duration (in seconds) to wait before giving up on resolving dependencies for a container. For example, you specify two containers in a task definition with containerA having a dependency on containerB reaching a COMPLETE , SUCCESS , or HEALTHY status. If a startTimeout value is specified for containerB and it does not reach the desired status within that time then containerA will give up and not start. This results in the task transitioning to a STOPPED state.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent to enable a container start timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
stopTimeout (integer) --
Time duration (in seconds) to wait before the container is forcefully killed if it doesn't exit normally on its own. For tasks using the Fargate launch type, the max stopTimeout value is 2 minutes. This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
For tasks using the EC2 launch type, the stop timeout value for the container takes precedence over the ECS_CONTAINER_STOP_TIMEOUT container agent configuration parameter, if used. Container instances require at least version 1.26.0 of the container agent to enable a container stop timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
hostname (string) --
The hostname to use for your container. This parameter maps to Hostname in the Create a container section of the Docker Remote API and the --hostname option to docker run .
Note
The hostname parameter is not supported if you are using the awsvpc network mode.
user (string) --
The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run .
You can use the following formats. If specifying a UID or GID, you must specify it as a positive integer.
user
user:group
uid
uid:gid
user:gid
uid:group
Note
This parameter is not supported for Windows containers.
workingDirectory (string) --
The working directory in which to run commands inside the container. This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run .
disableNetworking (boolean) --
When this parameter is true, networking is disabled within the container. This parameter maps to NetworkDisabled in the Create a container section of the Docker Remote API .
Note
This parameter is not supported for Windows containers.
privileged (boolean) --
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run .
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
readonlyRootFilesystem (boolean) --
When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run .
Note
This parameter is not supported for Windows containers.
dnsServers (list) --
A list of DNS servers that are presented to the container. This parameter maps to Dns in the Create a container section of the Docker Remote API and the --dns option to docker run .
Note
This parameter is not supported for Windows containers.
(string) --
dnsSearchDomains (list) --
A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run .
Note
This parameter is not supported for Windows containers.
(string) --
extraHosts (list) --
A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the Create a container section of the Docker Remote API and the --add-host option to docker run .
Note
This parameter is not supported for Windows containers or tasks that use the awsvpc network mode.
(dict) --
Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition .
hostname (string) --
The hostname to use in the /etc/hosts entry.
ipAddress (string) --
The IP address to use in the /etc/hosts entry.
dockerSecurityOptions (list) --
A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. This field is not valid for containers in tasks using the Fargate launch type.
This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run .
Note
The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide .
Note
This parameter is not supported for Windows containers.
(string) --
interactive (boolean) --
When this parameter is true , this allows you to deploy containerized applications that require stdin or a tty to be allocated. This parameter maps to OpenStdin in the Create a container section of the Docker Remote API and the --interactive option to docker run .
pseudoTerminal (boolean) --
When this parameter is true , a TTY is allocated. This parameter maps to Tty in the Create a container section of the Docker Remote API and the --tty option to docker run .
dockerLabels (dict) --
A key/value map of labels to add to the container. This parameter maps to Labels in the Create a container section of the Docker Remote API and the --label option to docker run . This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
(string) --
(string) --
ulimits (list) --
A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run . Valid naming values are displayed in the Ulimit data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
Note
This parameter is not supported for Windows containers.
(dict) --
The ulimit settings to pass to the container.
name (string) --
The type of the ulimit .
softLimit (integer) --
The soft limit for the ulimit type.
hardLimit (integer) --
The hard limit for the ulimit type.
logConfiguration (dict) --
The log configuration specification for the container.
This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run . By default, containers use the same logging driver that the Docker daemon uses. However the container may use a different logging driver than the Docker daemon by specifying a log driver with this parameter in the container definition. To use a different logging driver for a container, the log system must be configured properly on the container instance (or on a different log server for remote logging options). For more information on the options for different supported log drivers, see Configure logging drivers in the Docker documentation.
Note
Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon (shown in the LogConfiguration data type). Additional log drivers may be available in future releases of the Amazon ECS container agent.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
Note
The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide .
logDriver (string) --
The log driver to use for the container. The valid values listed for this parameter are log drivers that the Amazon ECS container agent can communicate with by default.
For tasks using the Fargate launch type, the supported log drivers are awslogs and splunk .
For tasks using the EC2 launch type, the supported log drivers are awslogs , fluentd , gelf , json-file , journald , logentries , syslog , splunk , and syslog .
For more information about using the awslogs log driver, see Using the awslogs Log Driver in the Amazon Elastic Container Service Developer Guide .
Note
If you have a custom driver that is not listed above that you would like to work with the Amazon ECS container agent, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, Amazon Web Services does not currently support running modified copies of this software.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
options (dict) --
The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
(string) --
(string) --
secretOptions (list) --
The secrets to pass to the log configuration.
(dict) --
An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:
To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.
To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.
For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
name (string) --
The name of the secret.
valueFrom (string) --
The secret to expose to the container. The supported values are either the full ARN of the AWS Secrets Manager secret or the full ARN of the parameter in the AWS Systems Manager Parameter Store.
Note
If the AWS Systems Manager Parameter Store parameter exists in the same Region as the task you are launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.
healthCheck (dict) --
The health check command and associated configuration parameters for the container. This parameter maps to HealthCheck in the Create a container section of the Docker Remote API and the HEALTHCHECK parameter of docker run .
command (list) --
A string array representing the command that the container runs to determine if it is healthy. The string array must start with CMD to execute the command arguments directly, or CMD-SHELL to run the command with the container's default shell. For example:
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see HealthCheck in the Create a container section of the Docker Remote API .
(string) --
interval (integer) --
The time period in seconds between each health check execution. You may specify between 5 and 300 seconds. The default value is 30 seconds.
timeout (integer) --
The time period in seconds to wait for a health check to succeed before it is considered a failure. You may specify between 2 and 60 seconds. The default value is 5.
retries (integer) --
The number of times to retry a failed health check before the container is considered unhealthy. You may specify between 1 and 10 retries. The default value is 3.
startPeriod (integer) --
The optional grace period within which to provide containers time to bootstrap before failed health checks count towards the maximum number of retries. You may specify between 0 and 300 seconds. The startPeriod is disabled by default.
Note
If a health check succeeds within the startPeriod , then the container is considered healthy and any subsequent failures count toward the maximum number of retries.
systemControls (list) --
A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run .
Note
It is not recommended that you specify network-related systemControls parameters for multiple containers in a single task that also uses either the awsvpc or host network modes. For tasks that use the awsvpc network mode, the container that is started last determines which systemControls parameters take effect. For tasks that use the host network mode, it changes the container instance's namespaced kernel parameters as well as the containers.
(dict) --
A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run .
It is not recommended that you specify network-related systemControls parameters for multiple containers in a single task that also uses either the awsvpc or host network mode for the following reasons:
For tasks that use the awsvpc network mode, if you set systemControls for any container, it applies to all containers in the task. If you set different systemControls for multiple containers in a single task, the container that is started last determines which systemControls take effect.
For tasks that use the host network mode, the systemControls parameter applies to the container instance's kernel parameter as well as that of all containers of any tasks running on that container instance.
namespace (string) --
The namespaced kernel parameter for which to set a value .
value (string) --
The value for the namespaced kernel parameter specified in namespace .
resourceRequirements (list) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) --
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) --
The type of resource to assign to a container. The only supported value is GPU .
firelensConfiguration (dict) --
The FireLens configuration for the container. This is used to specify and configure a log router for container logs.
type (string) --
The log router to use. The valid values are fluentd or fluentbit .
options (dict) --
The options to use when configuring the log router. This field is optional and can be used to add additional metadata, such as the task, task definition, cluster, and container instance details to the log event. If specified, the syntax to use is "options":{"enable-ecs-log-metadata":"true|false"} .
(string) --
(string) --
family (string) --
The name of a family that this task definition is registered to. A family groups multiple versions of a task definition. Amazon ECS gives the first task definition that you registered to a family a revision number of 1. Amazon ECS gives sequential revision numbers to each task definition that you add.
taskRoleArn (string) --
The short name or full Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that grants containers in the task permission to call AWS APIs on your behalf. For more information, see Amazon ECS Task Role in the Amazon Elastic Container Service Developer Guide .
IAM roles for tasks on Windows require that the -EnableTaskIAMRole option is set when you launch the Amazon ECS-optimized Windows AMI. Your containers must also run some configuration code in order to take advantage of the feature. For more information, see Windows IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide .
executionRoleArn (string) --
The Amazon Resource Name (ARN) of the task execution role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role.
networkMode (string) --
The Docker networking mode to use for the containers in the task. The valid values are none , bridge , awsvpc , and host . The default Docker network mode is bridge . If you are using the Fargate launch type, the awsvpc network mode is required. If you are using the EC2 launch type, any network mode can be used. If the network mode is set to none , you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The host and awsvpc network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the bridge mode.
With the host and awsvpc network modes, exposed container ports are mapped directly to the corresponding host port (for the host network mode) or the attached elastic network interface port (for the awsvpc network mode), so you cannot take advantage of dynamic host port mappings.
If the network mode is awsvpc , the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide .
Note
Currently, only Amazon ECS-optimized AMIs, other Amazon Linux variants with the ecs-init package, or AWS Fargate infrastructure support the awsvpc network mode.
If the network mode is host , you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.
Docker for Windows uses different network modes than Docker for Linux. When you register a task definition with Windows containers, you must not specify a network mode. If you use the console to register a task definition with Windows containers, you must choose the <default> network mode object.
For more information, see Network settings in the Docker run reference .
revision (integer) --
The revision of the task in a particular family. The revision is a version number of a task definition in a family. When you register a task definition for the first time, the revision is 1 . Each time that you register a new revision of a task definition in the same family, the revision value always increases by one, even if you have deregistered previous revisions in this family.
volumes (list) --
The list of volume definitions for the task.
If your tasks are using the Fargate launch type, the host and sourcePath parameters are not supported.
For more information about volume definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide .
(dict) --
A data volume used in a task definition. For tasks that use a Docker volume, specify a DockerVolumeConfiguration . For tasks that use a bind mount host volume, specify a host and optional sourcePath . For more information, see Using Data Volumes in Tasks .
name (string) --
The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. This name is referenced in the sourceVolume parameter of container definition mountPoints .
host (dict) --
This parameter is specified when you are using bind mount host volumes. Bind mount host volumes are supported when you are using either the EC2 or Fargate launch types. The contents of the host parameter determine whether your bind mount host volume persists on the host container instance and where it is stored. If the host parameter is empty, then the Docker daemon assigns a host path for your data volume. However, the data is not guaranteed to persist after the containers associated with it stop running.
Windows containers can mount whole directories on the same drive as $env:ProgramData . Windows containers cannot mount directories on a different drive, and mount point cannot be across drives. For example, you can mount C:\my\path:C:\my\path and D:\:D:\ , but not D:\my\path:C:\my\path or D:\:C:\my\path .
sourcePath (string) --
When the host parameter is used, specify a sourcePath to declare the path on the host container instance that is presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you. If the host parameter contains a sourcePath file location, then the data volume persists at the specified location on the host container instance until you delete it manually. If the sourcePath value does not exist on the host container instance, the Docker daemon creates it. If the location does exist, the contents of the source path folder are exported.
If you are using the Fargate launch type, the sourcePath parameter is not supported.
dockerVolumeConfiguration (dict) --
This parameter is specified when you are using Docker volumes. Docker volumes are only supported when you are using the EC2 launch type. Windows containers only support the use of the local driver. To use bind mounts, specify a host instead.
scope (string) --
The scope for the Docker volume that determines its lifecycle. Docker volumes that are scoped to a task are automatically provisioned when the task starts and destroyed when the task stops. Docker volumes that are scoped as shared persist after the task stops.
autoprovision (boolean) --
If this value is true , the Docker volume is created if it does not already exist.
Note
This field is only used if the scope is shared .
driver (string) --
The Docker volume driver to use. The driver value must match the driver name provided by Docker because it is used for task placement. If the driver was installed using the Docker plugin CLI, use docker plugin ls to retrieve the driver name from your container instance. If the driver was installed using another method, use Docker plugin discovery to retrieve the driver name. For more information, see Docker plugin discovery . This parameter maps to Driver in the Create a volume section of the Docker Remote API and the xxdriver option to docker volume create .
driverOpts (dict) --
A map of Docker driver-specific options passed through. This parameter maps to DriverOpts in the Create a volume section of the Docker Remote API and the xxopt option to docker volume create .
(string) --
(string) --
labels (dict) --
Custom metadata to add to your Docker volume. This parameter maps to Labels in the Create a volume section of the Docker Remote API and the xxlabel option to docker volume create .
(string) --
(string) --
status (string) --
The status of the task definition.
requiresAttributes (list) --
The container instance attributes required by your task. This field is not valid if you are using the Fargate launch type for your task.
(dict) --
An attribute is a name-value pair associated with an Amazon ECS object. Attributes enable you to extend the Amazon ECS data model by adding custom metadata to your resources. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide .
name (string) --
The name of the attribute. Up to 128 letters (uppercase and lowercase), numbers, hyphens, underscores, and periods are allowed.
value (string) --
The value of the attribute. Up to 128 letters (uppercase and lowercase), numbers, hyphens, underscores, periods, at signs (@), forward slashes, colons, and spaces are allowed.
targetType (string) --
The type of the target with which to attach the attribute. This parameter is required if you use the short form ID for a resource instead of the full ARN.
targetId (string) --
The ID of the target. You can specify the short form ID for a resource or the full Amazon Resource Name (ARN).
placementConstraints (list) --
An array of placement constraint objects to use for tasks. This field is not valid if you are using the Fargate launch type for your task.
(dict) --
An object representing a constraint on task placement in the task definition.
If you are using the Fargate launch type, task placement constraints are not supported.
For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of constraint. The DistinctInstance constraint ensures that each task in a particular group is running on a different container instance. The MemberOf constraint restricts selection to be from a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
compatibilities (list) --
The launch type to use with your task. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
(string) --
requiresCompatibilities (list) --
The launch type the task requires. If no value is specified, it will default to EC2 . Valid values include EC2 and FARGATE .
(string) --
cpu (string) --
The number of cpu units used by the task. If you are using the EC2 launch type, this field is optional and any value can be used. If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of valid values for the memory parameter:
256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)
512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)
1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
2048 (2 vCPU) - Available memory values: Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)
4096 (4 vCPU) - Available memory values: Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)
memory (string) --
The amount (in MiB) of memory used by the task. If using the EC2 launch type, this field is optional and any value can be used. If using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of valid values for the cpu parameter:
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)
pidMode (string) --
The process namespace to use for the containers in the task. The valid values are host or task . If host is specified, then all containers within the tasks that specified the host PID mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same process namespace. If no value is specified, the default is a private namespace. For more information, see PID settings in the Docker run reference .
If the host PID mode is used, be aware that there is a heightened risk of undesired process namespace expose. For more information, see Docker security .
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
ipcMode (string) --
The IPC resource namespace to use for the containers in the task. The valid values are host , task , or none . If host is specified, then all containers within the tasks that specified the host IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same IPC resources. If none is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. For more information, see IPC settings in the Docker run reference .
If the host IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. For more information, see Docker security .
If you are setting namespaced kernel parameters using systemControls for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide .
For tasks that use the host IPC mode, IPC namespace related systemControls are not supported.
For tasks that use the task IPC mode, IPC namespace related systemControls will apply to all containers within a task.
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
proxyConfiguration (dict) --
The configuration details for the App Mesh proxy.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent and at least version 1.26.0-1 of the ecs-init package to enable a proxy configuration. If your container instances are launched from the Amazon ECS-optimized AMI version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
type (string) --
The proxy type. The only supported value is APPMESH .
containerName (string) --
The name of the container that will serve as the App Mesh proxy.
properties (list) --
The set of network configuration parameters to provide the Container Network Interface (CNI) plugin, specified as key-value pairs.
IgnoredUID - (Required) The user ID (UID) of the proxy container as defined by the user parameter in a container definition. This is used to ensure the proxy ignores its own traffic. If IgnoredGID is specified, this field can be empty.
IgnoredGID - (Required) The group ID (GID) of the proxy container as defined by the user parameter in a container definition. This is used to ensure the proxy ignores its own traffic. If IgnoredUID is specified, this field can be empty.
AppPorts - (Required) The list of ports that the application uses. Network traffic to these ports is forwarded to the ProxyIngressPort and ProxyEgressPort .
ProxyIngressPort - (Required) Specifies the port that incoming traffic to the AppPorts is directed to.
ProxyEgressPort - (Required) Specifies the port that outgoing traffic from the AppPorts is directed to.
EgressIgnoredPorts - (Required) The egress traffic going to the specified ports is ignored and not redirected to the ProxyEgressPort . It can be an empty list.
EgressIgnoredIPs - (Required) The egress traffic going to the specified IP addresses is ignored and not redirected to the ProxyEgressPort . It can be an empty list.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
tags (list) --
The metadata that is applied to the task definition to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
{'tasks': {'containers': {'firelensConfiguration': {'options': {'string': 'string'},
'type': 'fluentd | '
'fluentbit'}}}}
Describes a specified task or tasks.
See also: AWS API Documentation
Request Syntax
client.describe_tasks(
cluster='string',
tasks=[
'string',
],
include=[
'TAGS',
]
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the task or tasks to describe. If you do not specify a cluster, the default cluster is assumed. This parameter is required if the task or tasks you are describing were launched in any cluster other than the default cluster.
list
[REQUIRED]
A list of up to 100 task IDs or full ARN entries.
(string) --
list
Specifies whether you want to see the resource tags for the task. If TAGS is specified, the tags are included in the response. If this field is omitted, tags are not included in the response.
(string) --
dict
Response Syntax
{
'tasks': [
{
'taskArn': 'string',
'clusterArn': 'string',
'taskDefinitionArn': 'string',
'containerInstanceArn': 'string',
'overrides': {
'containerOverrides': [
{
'name': 'string',
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
]
},
],
'taskRoleArn': 'string',
'executionRoleArn': 'string'
},
'lastStatus': 'string',
'desiredStatus': 'string',
'cpu': 'string',
'memory': 'string',
'containers': [
{
'containerArn': 'string',
'taskArn': 'string',
'name': 'string',
'runtimeId': 'string',
'lastStatus': 'string',
'exitCode': 123,
'reason': 'string',
'networkBindings': [
{
'bindIP': 'string',
'containerPort': 123,
'hostPort': 123,
'protocol': 'tcp'|'udp'
},
],
'networkInterfaces': [
{
'attachmentId': 'string',
'privateIpv4Address': 'string',
'ipv6Address': 'string'
},
],
'healthStatus': 'HEALTHY'|'UNHEALTHY'|'UNKNOWN',
'cpu': 'string',
'memory': 'string',
'memoryReservation': 'string',
'gpuIds': [
'string',
],
'firelensConfiguration': {
'type': 'fluentd'|'fluentbit',
'options': {
'string': 'string'
}
}
},
],
'startedBy': 'string',
'version': 123,
'stoppedReason': 'string',
'stopCode': 'TaskFailedToStart'|'EssentialContainerExited'|'UserInitiated',
'connectivity': 'CONNECTED'|'DISCONNECTED',
'connectivityAt': datetime(2015, 1, 1),
'pullStartedAt': datetime(2015, 1, 1),
'pullStoppedAt': datetime(2015, 1, 1),
'executionStoppedAt': datetime(2015, 1, 1),
'createdAt': datetime(2015, 1, 1),
'startedAt': datetime(2015, 1, 1),
'stoppingAt': datetime(2015, 1, 1),
'stoppedAt': datetime(2015, 1, 1),
'group': 'string',
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'attachments': [
{
'id': 'string',
'type': 'string',
'status': 'string',
'details': [
{
'name': 'string',
'value': 'string'
},
]
},
],
'healthStatus': 'HEALTHY'|'UNHEALTHY'|'UNKNOWN',
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
],
'failures': [
{
'arn': 'string',
'reason': 'string'
},
]
}
Response Structure
(dict) --
tasks (list) --
The list of tasks.
(dict) --
Details on a task in a cluster.
taskArn (string) --
The Amazon Resource Name (ARN) of the task.
clusterArn (string) --
The ARN of the cluster that hosts the task.
taskDefinitionArn (string) --
The ARN of the task definition that creates the task.
containerInstanceArn (string) --
The ARN of the container instances that host the task.
overrides (dict) --
One or more container overrides.
containerOverrides (list) --
One or more container overrides sent to a task.
(dict) --
The overrides that should be sent to a container. An empty container override can be passed in. An example of an empty container override would be {"containerOverrides": [ ] } . If a non-empty container override is specified, the name parameter must be included.
name (string) --
The name of the container that receives the override. This parameter is required if any override is specified.
command (list) --
The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
(string) --
environment (list) --
The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
cpu (integer) --
The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.
memory (integer) --
The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.
resourceRequirements (list) --
The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) --
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) --
The type of resource to assign to a container. The only supported value is GPU .
taskRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role.
executionRoleArn (string) --
The Amazon Resource Name (ARN) of the task execution role that the Amazon ECS container agent and the Docker daemon can assume.
lastStatus (string) --
The last known status of the task. For more information, see Task Lifecycle .
desiredStatus (string) --
The desired status of the task. For more information, see Task Lifecycle .
cpu (string) --
The number of CPU units used by the task as expressed in a task definition. It can be expressed as an integer using CPU units, for example 1024 . It can also be expressed as a string using vCPUs, for example 1 vCPU or 1 vcpu . String values are converted to an integer indicating the CPU units when the task definition is registered.
If you are using the EC2 launch type, this field is optional. Supported values are between 128 CPU units (0.125 vCPUs) and 10240 CPU units (10 vCPUs).
If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the memory parameter:
256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)
512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)
1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
2048 (2 vCPU) - Available memory values: Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)
4096 (4 vCPU) - Available memory values: Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)
memory (string) --
The amount of memory (in MiB) used by the task as expressed in a task definition. It can be expressed as an integer using MiB, for example 1024 . It can also be expressed as a string using GB, for example 1GB or 1 GB . String values are converted to an integer indicating the MiB when the task definition is registered.
If you are using the EC2 launch type, this field is optional.
If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the cpu parameter:
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)
containers (list) --
The containers associated with the task.
(dict) --
A Docker container that is part of a task.
containerArn (string) --
The Amazon Resource Name (ARN) of the container.
taskArn (string) --
The ARN of the task.
name (string) --
The name of the container.
runtimeId (string) --
The ID of the Docker container.
lastStatus (string) --
The last known status of the container.
exitCode (integer) --
The exit code returned from the container.
reason (string) --
A short (255 max characters) human-readable string to provide additional details about a running or stopped container.
networkBindings (list) --
The network bindings associated with the container.
(dict) --
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
bindIP (string) --
The IP address that the container is bound to on the container instance.
containerPort (integer) --
The port number on the container that is used with the network binding.
hostPort (integer) --
The port number on the host that is used with the network binding.
protocol (string) --
The protocol used for the network binding.
networkInterfaces (list) --
The network interfaces associated with the container.
(dict) --
An object representing the elastic network interface for tasks that use the awsvpc network mode.
attachmentId (string) --
The attachment ID for the network interface.
privateIpv4Address (string) --
The private IPv4 address for the network interface.
ipv6Address (string) --
The private IPv6 address for the network interface.
healthStatus (string) --
The health status of the container. If health checks are not configured for this container in its task definition, then it reports the health status as UNKNOWN .
cpu (string) --
The number of CPU units set for the container. The value will be 0 if no value was specified in the container definition when the task definition was registered.
memory (string) --
The hard limit (in MiB) of memory set for the container.
memoryReservation (string) --
The soft limit (in MiB) of memory set for the container.
gpuIds (list) --
The IDs of each GPU assigned to the container.
(string) --
firelensConfiguration (dict) --
The FireLens configuration for the container.
type (string) --
The log router to use. The valid values are fluentd or fluentbit .
options (dict) --
The options to use when configuring the log router. This field is optional and can be used to add additional metadata, such as the task, task definition, cluster, and container instance details to the log event. If specified, the syntax to use is "options":{"enable-ecs-log-metadata":"true|false"} .
(string) --
(string) --
startedBy (string) --
The tag specified when a task is started. If the task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
version (integer) --
The version counter for the task. Every time a task experiences a change that triggers a CloudWatch event, the version counter is incremented. If you are replicating your Amazon ECS task state with CloudWatch Events, you can compare the version of a task reported by the Amazon ECS API actionss with the version reported in CloudWatch Events for the task (inside the detail object) to verify that the version in your event stream is current.
stoppedReason (string) --
The reason that the task was stopped.
stopCode (string) --
The stop code indicating why a task was stopped. The stoppedReason may contain additional details.
connectivity (string) --
The connectivity status of a task.
connectivityAt (datetime) --
The Unix timestamp for when the task last went into CONNECTED status.
pullStartedAt (datetime) --
The Unix timestamp for when the container image pull began.
pullStoppedAt (datetime) --
The Unix timestamp for when the container image pull completed.
executionStoppedAt (datetime) --
The Unix timestamp for when the task execution stopped.
createdAt (datetime) --
The Unix timestamp for when the task was created (the task entered the PENDING state).
startedAt (datetime) --
The Unix timestamp for when the task started (the task transitioned from the PENDING state to the RUNNING state).
stoppingAt (datetime) --
The Unix timestamp for when the task stops (transitions from the RUNNING state to STOPPED ).
stoppedAt (datetime) --
The Unix timestamp for when the task was stopped (the task transitioned from the RUNNING state to the STOPPED state).
group (string) --
The name of the task group associated with the task.
launchType (string) --
The launch type on which your task is running. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
platformVersion (string) --
The platform version on which your task is running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
attachments (list) --
The Elastic Network Adapter associated with the task if the task uses the awsvpc network mode.
(dict) --
An object representing a container instance or task attachment.
id (string) --
The unique identifier for the attachment.
type (string) --
The type of the attachment, such as ElasticNetworkInterface .
status (string) --
The status of the attachment. Valid values are PRECREATED , CREATED , ATTACHING , ATTACHED , DETACHING , DETACHED , and DELETED .
details (list) --
Details of the attachment. For elastic network interfaces, this includes the network interface ID, the MAC address, the subnet ID, and the private IPv4 address.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
healthStatus (string) --
The health status for the task, which is determined by the health of the essential containers in the task. If all essential containers in the task are reporting as HEALTHY , then the task status also reports as HEALTHY . If any essential containers in the task are reporting as UNHEALTHY or UNKNOWN , then the task status also reports as UNHEALTHY or UNKNOWN , accordingly.
Note
The Amazon ECS container agent does not monitor or report on Docker health checks that are embedded in a container image (such as those specified in a parent image or from the image's Dockerfile) and not specified in the container definition. Health check parameters that are specified in a container definition override any Docker health checks that exist in the container image.
tags (list) --
The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
failures (list) --
Any failures associated with the call.
(dict) --
A failed resource.
arn (string) --
The Amazon Resource Name (ARN) of the failed resource.
reason (string) --
The reason for the failure.
{'containerDefinitions': {'firelensConfiguration': {'options': {'string': 'string'},
'type': 'fluentd | '
'fluentbit'},
'logConfiguration': {'logDriver': ['awsfirelens']}}}
Response {'taskDefinition': {'containerDefinitions': {'firelensConfiguration': {'options': {'string': 'string'},
'type': 'fluentd '
'| '
'fluentbit'},
'logConfiguration': {'logDriver': ['awsfirelens']}}}}
Registers a new task definition from the supplied family and containerDefinitions . Optionally, you can add data volumes to your containers with the volumes parameter. For more information about task definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide .
You can specify an IAM role for your task with the taskRoleArn parameter. When you specify an IAM role for a task, its containers can then use the latest versions of the AWS CLI or SDKs to make API requests to the AWS services that are specified in the IAM policy associated with the role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide .
You can specify a Docker networking mode for the containers in your task definition with the networkMode parameter. The available network modes correspond to those described in Network settings in the Docker run reference. If you specify the awsvpc network mode, the task is allocated an elastic network interface, and you must specify a NetworkConfiguration when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide .
See also: AWS API Documentation
Request Syntax
client.register_task_definition(
family='string',
taskRoleArn='string',
executionRoleArn='string',
networkMode='bridge'|'host'|'awsvpc'|'none',
containerDefinitions=[
{
'name': 'string',
'image': 'string',
'repositoryCredentials': {
'credentialsParameter': 'string'
},
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'links': [
'string',
],
'portMappings': [
{
'containerPort': 123,
'hostPort': 123,
'protocol': 'tcp'|'udp'
},
],
'essential': True|False,
'entryPoint': [
'string',
],
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'mountPoints': [
{
'sourceVolume': 'string',
'containerPath': 'string',
'readOnly': True|False
},
],
'volumesFrom': [
{
'sourceContainer': 'string',
'readOnly': True|False
},
],
'linuxParameters': {
'capabilities': {
'add': [
'string',
],
'drop': [
'string',
]
},
'devices': [
{
'hostPath': 'string',
'containerPath': 'string',
'permissions': [
'read'|'write'|'mknod',
]
},
],
'initProcessEnabled': True|False,
'sharedMemorySize': 123,
'tmpfs': [
{
'containerPath': 'string',
'size': 123,
'mountOptions': [
'string',
]
},
],
'maxSwap': 123,
'swappiness': 123
},
'secrets': [
{
'name': 'string',
'valueFrom': 'string'
},
],
'dependsOn': [
{
'containerName': 'string',
'condition': 'START'|'COMPLETE'|'SUCCESS'|'HEALTHY'
},
],
'startTimeout': 123,
'stopTimeout': 123,
'hostname': 'string',
'user': 'string',
'workingDirectory': 'string',
'disableNetworking': True|False,
'privileged': True|False,
'readonlyRootFilesystem': True|False,
'dnsServers': [
'string',
],
'dnsSearchDomains': [
'string',
],
'extraHosts': [
{
'hostname': 'string',
'ipAddress': 'string'
},
],
'dockerSecurityOptions': [
'string',
],
'interactive': True|False,
'pseudoTerminal': True|False,
'dockerLabels': {
'string': 'string'
},
'ulimits': [
{
'name': 'core'|'cpu'|'data'|'fsize'|'locks'|'memlock'|'msgqueue'|'nice'|'nofile'|'nproc'|'rss'|'rtprio'|'rttime'|'sigpending'|'stack',
'softLimit': 123,
'hardLimit': 123
},
],
'logConfiguration': {
'logDriver': 'json-file'|'syslog'|'journald'|'gelf'|'fluentd'|'awslogs'|'splunk'|'awsfirelens',
'options': {
'string': 'string'
},
'secretOptions': [
{
'name': 'string',
'valueFrom': 'string'
},
]
},
'healthCheck': {
'command': [
'string',
],
'interval': 123,
'timeout': 123,
'retries': 123,
'startPeriod': 123
},
'systemControls': [
{
'namespace': 'string',
'value': 'string'
},
],
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
],
'firelensConfiguration': {
'type': 'fluentd'|'fluentbit',
'options': {
'string': 'string'
}
}
},
],
volumes=[
{
'name': 'string',
'host': {
'sourcePath': 'string'
},
'dockerVolumeConfiguration': {
'scope': 'task'|'shared',
'autoprovision': True|False,
'driver': 'string',
'driverOpts': {
'string': 'string'
},
'labels': {
'string': 'string'
}
}
},
],
placementConstraints=[
{
'type': 'memberOf',
'expression': 'string'
},
],
requiresCompatibilities=[
'EC2'|'FARGATE',
],
cpu='string',
memory='string',
tags=[
{
'key': 'string',
'value': 'string'
},
],
pidMode='host'|'task',
ipcMode='host'|'task'|'none',
proxyConfiguration={
'type': 'APPMESH',
'containerName': 'string',
'properties': [
{
'name': 'string',
'value': 'string'
},
]
}
)
string
[REQUIRED]
You must specify a family for a task definition, which allows you to track multiple versions of the same task definition. The family is used as a name for your task definition. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed.
string
The short name or full Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide .
string
The Amazon Resource Name (ARN) of the task execution role that the Amazon ECS container agent and the Docker daemon can assume.
string
The Docker networking mode to use for the containers in the task. The valid values are none , bridge , awsvpc , and host . The default Docker network mode is bridge . If you are using the Fargate launch type, the awsvpc network mode is required. If you are using the EC2 launch type, any network mode can be used. If the network mode is set to none , you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The host and awsvpc network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the bridge mode.
With the host and awsvpc network modes, exposed container ports are mapped directly to the corresponding host port (for the host network mode) or the attached elastic network interface port (for the awsvpc network mode), so you cannot take advantage of dynamic host port mappings.
If the network mode is awsvpc , the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide .
Note
Currently, only Amazon ECS-optimized AMIs, other Amazon Linux variants with the ecs-init package, or AWS Fargate infrastructure support the awsvpc network mode.
If the network mode is host , you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.
Docker for Windows uses different network modes than Docker for Linux. When you register a task definition with Windows containers, you must not specify a network mode. If you use the console to register a task definition with Windows containers, you must choose the <default> network mode object.
For more information, see Network settings in the Docker run reference .
list
[REQUIRED]
A list of container definitions in JSON format that describe the different containers that make up your task.
(dict) --
Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
name (string) --
The name of a container. If you are linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. This parameter maps to name in the Create a container section of the Docker Remote API and the --name option to docker run .
image (string) --
The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with either `` repository-url /image :tag `` or `` repository-url /image @*digest* `` . Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run .
When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image are not propagated to already running tasks.
Images in Amazon ECR repositories can be specified by either using the full registry/repository:tag or registry/repository@digest . For example, 012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>:latest or 012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE .
Images in official repositories on Docker Hub use a single name (for example, ubuntu or mongo ).
Images in other repositories on Docker Hub are qualified with an organization name (for example, amazon/amazon-ecs-agent ).
Images in other online repositories are qualified further by a domain name (for example, quay.io/assemblyline/ubuntu ).
repositoryCredentials (dict) --
The private repository authentication credentials to use.
credentialsParameter (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the secret containing the private repository credentials.
Note
When you are using the Amazon ECS API, AWS CLI, or AWS SDK, if the secret exists in the same Region as the task that you are launching then you can use either the full ARN or the name of the secret. When you are using the AWS Management Console, you must specify the full ARN of the secret.
cpu (integer) --
The number of cpu units reserved for the container. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run .
This field is optional for tasks using the Fargate launch type, and the only requirement is that the total amount of CPU reserved for all containers within a task be lower than the task-level cpu value.
Note
You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.
For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that is the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task would be guaranteed a minimum of 512 CPU units when needed, and each container could float to higher CPU usage if the other container was not using it, but if both tasks were 100% active all of the time, they would be limited to 512 CPU units.
Linux containers share unallocated CPU units with other containers on the container instance with the same ratio as their allocated amount. For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that is the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task would be guaranteed a minimum of 512 CPU units when needed, and each container could float to higher CPU usage if the other container was not using it, but if both tasks were 100% active all of the time, they would be limited to 512 CPU units.
On Linux container instances, the Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. For more information, see CPU share constraint in the Docker documentation. The minimum valid CPU share value that the Linux kernel allows is 2. However, the CPU parameter is not required, and you can use CPU values below 2 in your container definitions. For CPU values below 2 (including null), the behavior varies based on your Amazon ECS container agent version:
Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to two CPU shares.
Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.
On Windows container instances, the CPU limit is enforced as an absolute limit, or a quota. Windows containers only have access to the specified amount of CPU that is described in the task definition.
memory (integer) --
The amount (in MiB) of memory to present to the container. If your container attempts to exceed the memory specified here, the container is killed. The total amount of memory reserved for all containers within a task must be lower than the task memory value, if one is specified. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run .
If your containers are part of a task using the Fargate launch type, this field is optional.
For containers that are part of a task using the EC2 launch type, you must specify a non-zero integer for one or both of memory or memoryReservation in container definitions. If you specify both, memory must be greater than memoryReservation . If you specify memoryReservation , then that value is subtracted from the available memory resources for the container instance on which the container is placed. Otherwise, the value of memory is used.
The Docker daemon reserves a minimum of 4 MiB of memory for a container, so you should not specify fewer than 4 MiB of memory for your containers.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container. When system memory is under heavy contention, Docker attempts to keep the container memory to this soft limit. However, your container can consume more memory when it needs to, up to either the hard limit specified with the memory parameter (if applicable), or all of the available memory on the container instance, whichever comes first. This parameter maps to MemoryReservation in the Create a container section of the Docker Remote API and the --memory-reservation option to docker run .
You must specify a non-zero integer for one or both of memory or memoryReservation in container definitions. If you specify both, memory must be greater than memoryReservation . If you specify memoryReservation , then that value is subtracted from the available memory resources for the container instance on which the container is placed. Otherwise, the value of memory is used.
For example, if your container normally uses 128 MiB of memory, but occasionally bursts to 256 MiB of memory for short periods of time, you can set a memoryReservation of 128 MiB, and a memory hard limit of 300 MiB. This configuration would allow the container to only reserve 128 MiB of memory from the remaining resources on the container instance, but also allow the container to consume more memory resources when needed.
The Docker daemon reserves a minimum of 4 MiB of memory for a container, so you should not specify fewer than 4 MiB of memory for your containers.
links (list) --
The links parameter allows containers to communicate with each other without the need for port mappings. This parameter is only supported if the network mode of a task definition is bridge . The name:internalName construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. For more information about linking Docker containers, go to Legacy container links in the Docker documentation. This parameter maps to Links in the Create a container section of the Docker Remote API and the --link option to docker run .
Note
This parameter is not supported for Windows containers.
Warning
Containers that are collocated on a single container instance may be able to communicate with each other without requiring links or host port mappings. Network isolation is achieved on the container instance using security groups and VPC settings.
(string) --
portMappings (list) --
The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic.
For task definitions that use the awsvpc network mode, you should only specify the containerPort . The hostPort can be left blank or it must be the same value as the containerPort .
Port mappings on Windows use the NetNAT gateway address rather than localhost . There is no loopback for port mappings on Windows, so you cannot access a container's mapped port from the host itself.
This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run . If the network mode of a task definition is set to none , then you can't specify port mappings. If the network mode of a task definition is set to host , then host ports must either be undefined or they must match the container port in the port mapping.
Note
After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the Network Bindings section of a container description for a selected task in the Amazon ECS console. The assignments are also visible in the networkBindings section DescribeTasks responses.
(dict) --
Port mappings allow containers to access ports on the host container instance to send or receive traffic. Port mappings are specified as part of the container definition.
If you are using containers in a task with the awsvpc or host network mode, exposed ports should be specified using containerPort . The hostPort can be left blank or it must be the same value as the containerPort .
After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
containerPort (integer) --
The port number on the container that is bound to the user-specified or automatically assigned host port.
If you are using containers in a task with the awsvpc or host network mode, exposed ports should be specified using containerPort .
If you are using containers in a task with the bridge network mode and you specify a container port and not a host port, your container automatically receives a host port in the ephemeral port range. For more information, see hostPort . Port mappings that are automatically assigned in this way do not count toward the 100 reserved ports limit of a container instance.
Warning
You cannot expose the same container port for multiple protocols. An error will be returned if this is attempted.
hostPort (integer) --
The port number on the container instance to reserve for your container.
If you are using containers in a task with the awsvpc or host network mode, the hostPort can either be left blank or set to the same value as the containerPort .
If you are using containers in a task with the bridge network mode, you can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0 ) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version.
The default ephemeral port range for Docker version 1.6.0 and later is listed on the instance under /proc/sys/net/ipv4/ip_local_port_range . If this kernel parameter is unavailable, the default ephemeral port range from 49153 through 65535 is used. Do not attempt to specify a host port in the ephemeral port range as these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.
Note
The default ephemeral port range from 49153 through 65535 is always used for Docker versions before 1.6.0.
The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent ports 51678-51680. Any host port that was previously specified in a running task is also reserved while the task is running (after a task stops, the host port is released). The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output. A container instance can have up to 100 reserved ports at a time, including the default reserved ports. Automatically assigned ports don't count toward the 100 reserved ports limit.
protocol (string) --
The protocol used for the port mapping. Valid values are tcp and udp . The default is tcp .
essential (boolean) --
If the essential parameter of a container is marked as true , and that container fails or stops for any reason, all other containers that are part of the task are stopped. If the essential parameter of a container is marked as false , then its failure does not affect the rest of the containers in a task. If this parameter is omitted, a container is assumed to be essential.
All tasks must have at least one essential container. If you have an application that is composed of multiple containers, you should group containers that are used for a common purpose into components, and separate the different components into multiple task definitions. For more information, see Application Architecture in the Amazon Elastic Container Service Developer Guide .
entryPoint (list) --
Warning
Early versions of the Amazon ECS container agent do not properly handle entryPoint parameters. If you have problems using entryPoint , update your container agent or enter your commands and arguments as command array items instead.
The entry point that is passed to the container. This parameter maps to Entrypoint in the Create a container section of the Docker Remote API and the --entrypoint option to docker run . For more information, see https://docs.docker.com/engine/reference/builder/#entrypoint .
(string) --
command (list) --
The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run . For more information, see https://docs.docker.com/engine/reference/builder/#cmd . If there are multiple arguments, each argument should be a separated string in the array.
(string) --
environment (list) --
The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run .
Warning
We do not recommend using plaintext environment variables for sensitive information, such as credential data.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
mountPoints (list) --
The mount points for data volumes in your container.
This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run .
Windows containers can mount whole directories on the same drive as $env:ProgramData . Windows containers cannot mount directories on a different drive, and mount point cannot be across drives.
(dict) --
Details on a volume mount point that is used in a container definition.
sourceVolume (string) --
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
containerPath (string) --
The path on the container to mount the host volume at.
readOnly (boolean) --
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. The default value is false .
volumesFrom (list) --
Data volumes to mount from another container. This parameter maps to VolumesFrom in the Create a container section of the Docker Remote API and the --volumes-from option to docker run .
(dict) --
Details on a data volume from another container in the same task definition.
sourceContainer (string) --
The name of another container within the same task definition from which to mount volumes.
readOnly (boolean) --
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. The default value is false .
linuxParameters (dict) --
Linux-specific modifications that are applied to the container, such as Linux kernel capabilities. For more information see KernelCapabilities .
Note
This parameter is not supported for Windows containers.
capabilities (dict) --
The Linux capabilities for the container that are added to or dropped from the default configuration provided by Docker.
Note
If you are using tasks that use the Fargate launch type, capabilities is supported but the add parameter is not supported.
add (list) --
The Linux capabilities for the container that have been added to the default configuration provided by Docker. This parameter maps to CapAdd in the Create a container section of the Docker Remote API and the --cap-add option to docker run .
Note
If you are using tasks that use the Fargate launch type, the add parameter is not supported.
Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
(string) --
drop (list) --
The Linux capabilities for the container that have been removed from the default configuration provided by Docker. This parameter maps to CapDrop in the Create a container section of the Docker Remote API and the --cap-drop option to docker run .
Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
(string) --
devices (list) --
Any host devices to expose to the container. This parameter maps to Devices in the Create a container section of the Docker Remote API and the --device option to docker run .
Note
If you are using tasks that use the Fargate launch type, the devices parameter is not supported.
(dict) --
An object representing a container instance host device.
hostPath (string) -- [REQUIRED]
The path for the device on the host container instance.
containerPath (string) --
The path inside the container at which to expose the host device.
permissions (list) --
The explicit permissions to provide to the container for the device. By default, the container has permissions for read , write , and mknod for the device.
(string) --
initProcessEnabled (boolean) --
Run an init process inside the container that forwards signals and reaps processes. This parameter maps to the --init option to docker run . This parameter requires version 1.25 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
sharedMemorySize (integer) --
The value for the size (in MiB) of the /dev/shm volume. This parameter maps to the --shm-size option to docker run .
Note
If you are using tasks that use the Fargate launch type, the sharedMemorySize parameter is not supported.
tmpfs (list) --
The container path, mount options, and size (in MiB) of the tmpfs mount. This parameter maps to the --tmpfs option to docker run .
Note
If you are using tasks that use the Fargate launch type, the tmpfs parameter is not supported.
(dict) --
The container path, mount options, and size of the tmpfs mount.
containerPath (string) -- [REQUIRED]
The absolute file path where the tmpfs volume is to be mounted.
size (integer) -- [REQUIRED]
The size (in MiB) of the tmpfs volume.
mountOptions (list) --
The list of tmpfs volume mount options.
Valid values: "defaults" | "ro" | "rw" | "suid" | "nosuid" | "dev" | "nodev" | "exec" | "noexec" | "sync" | "async" | "dirsync" | "remount" | "mand" | "nomand" | "atime" | "noatime" | "diratime" | "nodiratime" | "bind" | "rbind" | "unbindable" | "runbindable" | "private" | "rprivate" | "shared" | "rshared" | "slave" | "rslave" | "relatime" | "norelatime" | "strictatime" | "nostrictatime" | "mode" | "uid" | "gid" | "nr_inodes" | "nr_blocks" | "mpol"
(string) --
maxSwap (integer) --
The total amount of swap memory (in MiB) a container can use. This parameter will be translated to the --memory-swap option to docker run where the value would be the sum of the container memory plus the maxSwap value.
If a maxSwap value of 0 is specified, the container will not use swap. Accepted values are 0 or any positive integer. If the maxSwap parameter is omitted, the container will use the swap configuration for the container instance it is running on. A maxSwap value must be set for the swappiness parameter to be used.
Note
If you are using tasks that use the Fargate launch type, the maxSwap parameter is not supported.
swappiness (integer) --
This allows you to tune a container's memory swappiness behavior. A swappiness value of 0 will cause swapping to not happen unless absolutely necessary. A swappiness value of 100 will cause pages to be swapped very aggressively. Accepted values are whole numbers between 0 and 100 . If the swappiness parameter is not specified, a default value of 60 is used. If a value is not specified for maxSwap then this parameter is ignored. This parameter maps to the --memory-swappiness option to docker run .
Note
If you are using tasks that use the Fargate launch type, the swappiness parameter is not supported.
secrets (list) --
The secrets to pass to the container. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
(dict) --
An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:
To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.
To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.
For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
name (string) -- [REQUIRED]
The name of the secret.
valueFrom (string) -- [REQUIRED]
The secret to expose to the container. The supported values are either the full ARN of the AWS Secrets Manager secret or the full ARN of the parameter in the AWS Systems Manager Parameter Store.
Note
If the AWS Systems Manager Parameter Store parameter exists in the same Region as the task you are launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.
dependsOn (list) --
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies. When a dependency is defined for container startup, for container shutdown it is reversed.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent to enable container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
(dict) --
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies. When a dependency is defined for container startup, for container shutdown it is reversed.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent to enable container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
Note
If you are using tasks that use the Fargate launch type, container dependency parameters are not supported.
containerName (string) -- [REQUIRED]
The name of a container.
condition (string) -- [REQUIRED]
The dependency condition of the container. The following are the available conditions and their behavior:
START - This condition emulates the behavior of links and volumes today. It validates that a dependent container is started before permitting other containers to start.
COMPLETE - This condition validates that a dependent container runs to completion (exits) before permitting other containers to start. This can be useful for nonessential containers that run a script and then exit.
SUCCESS - This condition is the same as COMPLETE , but it also requires that the container exits with a zero status.
HEALTHY - This condition validates that the dependent container passes its Docker health check before permitting other containers to start. This requires that the dependent container has health checks configured. This condition is confirmed only at task startup.
startTimeout (integer) --
Time duration (in seconds) to wait before giving up on resolving dependencies for a container. For example, you specify two containers in a task definition with containerA having a dependency on containerB reaching a COMPLETE , SUCCESS , or HEALTHY status. If a startTimeout value is specified for containerB and it does not reach the desired status within that time then containerA will give up and not start. This results in the task transitioning to a STOPPED state.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent to enable a container start timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
stopTimeout (integer) --
Time duration (in seconds) to wait before the container is forcefully killed if it doesn't exit normally on its own. For tasks using the Fargate launch type, the max stopTimeout value is 2 minutes. This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
For tasks using the EC2 launch type, the stop timeout value for the container takes precedence over the ECS_CONTAINER_STOP_TIMEOUT container agent configuration parameter, if used. Container instances require at least version 1.26.0 of the container agent to enable a container stop timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
hostname (string) --
The hostname to use for your container. This parameter maps to Hostname in the Create a container section of the Docker Remote API and the --hostname option to docker run .
Note
The hostname parameter is not supported if you are using the awsvpc network mode.
user (string) --
The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run .
You can use the following formats. If specifying a UID or GID, you must specify it as a positive integer.
user
user:group
uid
uid:gid
user:gid
uid:group
Note
This parameter is not supported for Windows containers.
workingDirectory (string) --
The working directory in which to run commands inside the container. This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run .
disableNetworking (boolean) --
When this parameter is true, networking is disabled within the container. This parameter maps to NetworkDisabled in the Create a container section of the Docker Remote API .
Note
This parameter is not supported for Windows containers.
privileged (boolean) --
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run .
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
readonlyRootFilesystem (boolean) --
When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run .
Note
This parameter is not supported for Windows containers.
dnsServers (list) --
A list of DNS servers that are presented to the container. This parameter maps to Dns in the Create a container section of the Docker Remote API and the --dns option to docker run .
Note
This parameter is not supported for Windows containers.
(string) --
dnsSearchDomains (list) --
A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run .
Note
This parameter is not supported for Windows containers.
(string) --
extraHosts (list) --
A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the Create a container section of the Docker Remote API and the --add-host option to docker run .
Note
This parameter is not supported for Windows containers or tasks that use the awsvpc network mode.
(dict) --
Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition .
hostname (string) -- [REQUIRED]
The hostname to use in the /etc/hosts entry.
ipAddress (string) -- [REQUIRED]
The IP address to use in the /etc/hosts entry.
dockerSecurityOptions (list) --
A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. This field is not valid for containers in tasks using the Fargate launch type.
This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run .
Note
The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide .
Note
This parameter is not supported for Windows containers.
(string) --
interactive (boolean) --
When this parameter is true , this allows you to deploy containerized applications that require stdin or a tty to be allocated. This parameter maps to OpenStdin in the Create a container section of the Docker Remote API and the --interactive option to docker run .
pseudoTerminal (boolean) --
When this parameter is true , a TTY is allocated. This parameter maps to Tty in the Create a container section of the Docker Remote API and the --tty option to docker run .
dockerLabels (dict) --
A key/value map of labels to add to the container. This parameter maps to Labels in the Create a container section of the Docker Remote API and the --label option to docker run . This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
(string) --
(string) --
ulimits (list) --
A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run . Valid naming values are displayed in the Ulimit data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
Note
This parameter is not supported for Windows containers.
(dict) --
The ulimit settings to pass to the container.
name (string) -- [REQUIRED]
The type of the ulimit .
softLimit (integer) -- [REQUIRED]
The soft limit for the ulimit type.
hardLimit (integer) -- [REQUIRED]
The hard limit for the ulimit type.
logConfiguration (dict) --
The log configuration specification for the container.
This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run . By default, containers use the same logging driver that the Docker daemon uses. However the container may use a different logging driver than the Docker daemon by specifying a log driver with this parameter in the container definition. To use a different logging driver for a container, the log system must be configured properly on the container instance (or on a different log server for remote logging options). For more information on the options for different supported log drivers, see Configure logging drivers in the Docker documentation.
Note
Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon (shown in the LogConfiguration data type). Additional log drivers may be available in future releases of the Amazon ECS container agent.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
Note
The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide .
logDriver (string) -- [REQUIRED]
The log driver to use for the container. The valid values listed for this parameter are log drivers that the Amazon ECS container agent can communicate with by default.
For tasks using the Fargate launch type, the supported log drivers are awslogs and splunk .
For tasks using the EC2 launch type, the supported log drivers are awslogs , fluentd , gelf , json-file , journald , logentries , syslog , splunk , and syslog .
For more information about using the awslogs log driver, see Using the awslogs Log Driver in the Amazon Elastic Container Service Developer Guide .
Note
If you have a custom driver that is not listed above that you would like to work with the Amazon ECS container agent, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, Amazon Web Services does not currently support running modified copies of this software.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
options (dict) --
The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
(string) --
(string) --
secretOptions (list) --
The secrets to pass to the log configuration.
(dict) --
An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:
To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.
To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.
For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
name (string) -- [REQUIRED]
The name of the secret.
valueFrom (string) -- [REQUIRED]
The secret to expose to the container. The supported values are either the full ARN of the AWS Secrets Manager secret or the full ARN of the parameter in the AWS Systems Manager Parameter Store.
Note
If the AWS Systems Manager Parameter Store parameter exists in the same Region as the task you are launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.
healthCheck (dict) --
The health check command and associated configuration parameters for the container. This parameter maps to HealthCheck in the Create a container section of the Docker Remote API and the HEALTHCHECK parameter of docker run .
command (list) -- [REQUIRED]
A string array representing the command that the container runs to determine if it is healthy. The string array must start with CMD to execute the command arguments directly, or CMD-SHELL to run the command with the container's default shell. For example:
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see HealthCheck in the Create a container section of the Docker Remote API .
(string) --
interval (integer) --
The time period in seconds between each health check execution. You may specify between 5 and 300 seconds. The default value is 30 seconds.
timeout (integer) --
The time period in seconds to wait for a health check to succeed before it is considered a failure. You may specify between 2 and 60 seconds. The default value is 5.
retries (integer) --
The number of times to retry a failed health check before the container is considered unhealthy. You may specify between 1 and 10 retries. The default value is 3.
startPeriod (integer) --
The optional grace period within which to provide containers time to bootstrap before failed health checks count towards the maximum number of retries. You may specify between 0 and 300 seconds. The startPeriod is disabled by default.
Note
If a health check succeeds within the startPeriod , then the container is considered healthy and any subsequent failures count toward the maximum number of retries.
systemControls (list) --
A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run .
Note
It is not recommended that you specify network-related systemControls parameters for multiple containers in a single task that also uses either the awsvpc or host network modes. For tasks that use the awsvpc network mode, the container that is started last determines which systemControls parameters take effect. For tasks that use the host network mode, it changes the container instance's namespaced kernel parameters as well as the containers.
(dict) --
A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run .
It is not recommended that you specify network-related systemControls parameters for multiple containers in a single task that also uses either the awsvpc or host network mode for the following reasons:
For tasks that use the awsvpc network mode, if you set systemControls for any container, it applies to all containers in the task. If you set different systemControls for multiple containers in a single task, the container that is started last determines which systemControls take effect.
For tasks that use the host network mode, the systemControls parameter applies to the container instance's kernel parameter as well as that of all containers of any tasks running on that container instance.
namespace (string) --
The namespaced kernel parameter for which to set a value .
value (string) --
The value for the namespaced kernel parameter specified in namespace .
resourceRequirements (list) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) -- [REQUIRED]
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) -- [REQUIRED]
The type of resource to assign to a container. The only supported value is GPU .
firelensConfiguration (dict) --
The FireLens configuration for the container. This is used to specify and configure a log router for container logs.
type (string) -- [REQUIRED]
The log router to use. The valid values are fluentd or fluentbit .
options (dict) --
The options to use when configuring the log router. This field is optional and can be used to add additional metadata, such as the task, task definition, cluster, and container instance details to the log event. If specified, the syntax to use is "options":{"enable-ecs-log-metadata":"true|false"} .
(string) --
(string) --
list
A list of volume definitions in JSON format that containers in your task may use.
(dict) --
A data volume used in a task definition. For tasks that use a Docker volume, specify a DockerVolumeConfiguration . For tasks that use a bind mount host volume, specify a host and optional sourcePath . For more information, see Using Data Volumes in Tasks .
name (string) --
The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. This name is referenced in the sourceVolume parameter of container definition mountPoints .
host (dict) --
This parameter is specified when you are using bind mount host volumes. Bind mount host volumes are supported when you are using either the EC2 or Fargate launch types. The contents of the host parameter determine whether your bind mount host volume persists on the host container instance and where it is stored. If the host parameter is empty, then the Docker daemon assigns a host path for your data volume. However, the data is not guaranteed to persist after the containers associated with it stop running.
Windows containers can mount whole directories on the same drive as $env:ProgramData . Windows containers cannot mount directories on a different drive, and mount point cannot be across drives. For example, you can mount C:\my\path:C:\my\path and D:\:D:\ , but not D:\my\path:C:\my\path or D:\:C:\my\path .
sourcePath (string) --
When the host parameter is used, specify a sourcePath to declare the path on the host container instance that is presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you. If the host parameter contains a sourcePath file location, then the data volume persists at the specified location on the host container instance until you delete it manually. If the sourcePath value does not exist on the host container instance, the Docker daemon creates it. If the location does exist, the contents of the source path folder are exported.
If you are using the Fargate launch type, the sourcePath parameter is not supported.
dockerVolumeConfiguration (dict) --
This parameter is specified when you are using Docker volumes. Docker volumes are only supported when you are using the EC2 launch type. Windows containers only support the use of the local driver. To use bind mounts, specify a host instead.
scope (string) --
The scope for the Docker volume that determines its lifecycle. Docker volumes that are scoped to a task are automatically provisioned when the task starts and destroyed when the task stops. Docker volumes that are scoped as shared persist after the task stops.
autoprovision (boolean) --
If this value is true , the Docker volume is created if it does not already exist.
Note
This field is only used if the scope is shared .
driver (string) --
The Docker volume driver to use. The driver value must match the driver name provided by Docker because it is used for task placement. If the driver was installed using the Docker plugin CLI, use docker plugin ls to retrieve the driver name from your container instance. If the driver was installed using another method, use Docker plugin discovery to retrieve the driver name. For more information, see Docker plugin discovery . This parameter maps to Driver in the Create a volume section of the Docker Remote API and the xxdriver option to docker volume create .
driverOpts (dict) --
A map of Docker driver-specific options passed through. This parameter maps to DriverOpts in the Create a volume section of the Docker Remote API and the xxopt option to docker volume create .
(string) --
(string) --
labels (dict) --
Custom metadata to add to your Docker volume. This parameter maps to Labels in the Create a volume section of the Docker Remote API and the xxlabel option to docker volume create .
(string) --
(string) --
list
An array of placement constraint objects to use for the task. You can specify a maximum of 10 constraints per task (this limit includes constraints in the task definition and those specified at runtime).
(dict) --
An object representing a constraint on task placement in the task definition.
If you are using the Fargate launch type, task placement constraints are not supported.
For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of constraint. The DistinctInstance constraint ensures that each task in a particular group is running on a different container instance. The MemberOf constraint restricts selection to be from a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
list
The launch type required by the task. If no value is specified, it defaults to EC2 .
(string) --
string
The number of CPU units used by the task. It can be expressed as an integer using CPU units, for example 1024 , or as a string using vCPUs, for example 1 vCPU or 1 vcpu , in a task definition. String values are converted to an integer indicating the CPU units when the task definition is registered.
Note
Task-level CPU and memory parameters are ignored for Windows containers. We recommend specifying container-level resources for Windows containers.
If you are using the EC2 launch type, this field is optional. Supported values are between 128 CPU units (0.125 vCPUs) and 10240 CPU units (10 vCPUs).
If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the memory parameter:
256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)
512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)
1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
2048 (2 vCPU) - Available memory values: Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)
4096 (4 vCPU) - Available memory values: Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)
string
The amount of memory (in MiB) used by the task. It can be expressed as an integer using MiB, for example 1024 , or as a string using GB, for example 1GB or 1 GB , in a task definition. String values are converted to an integer indicating the MiB when the task definition is registered.
Note
Task-level CPU and memory parameters are ignored for Windows containers. We recommend specifying container-level resources for Windows containers.
If using the EC2 launch type, this field is optional.
If using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the cpu parameter:
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)
list
The metadata that you apply to the task definition to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
string
The process namespace to use for the containers in the task. The valid values are host or task . If host is specified, then all containers within the tasks that specified the host PID mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same process namespace. If no value is specified, the default is a private namespace. For more information, see PID settings in the Docker run reference .
If the host PID mode is used, be aware that there is a heightened risk of undesired process namespace expose. For more information, see Docker security .
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
string
The IPC resource namespace to use for the containers in the task. The valid values are host , task , or none . If host is specified, then all containers within the tasks that specified the host IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same IPC resources. If none is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. For more information, see IPC settings in the Docker run reference .
If the host IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. For more information, see Docker security .
If you are setting namespaced kernel parameters using systemControls for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide .
For tasks that use the host IPC mode, IPC namespace related systemControls are not supported.
For tasks that use the task IPC mode, IPC namespace related systemControls will apply to all containers within a task.
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
dict
The configuration details for the App Mesh proxy.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent and at least version 1.26.0-1 of the ecs-init package to enable a proxy configuration. If your container instances are launched from the Amazon ECS-optimized AMI version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
For tasks using the Fargate launch type, the task or service requires platform version 1.3.0 or later.
type (string) --
The proxy type. The only supported value is APPMESH .
containerName (string) -- [REQUIRED]
The name of the container that will serve as the App Mesh proxy.
properties (list) --
The set of network configuration parameters to provide the Container Network Interface (CNI) plugin, specified as key-value pairs.
IgnoredUID - (Required) The user ID (UID) of the proxy container as defined by the user parameter in a container definition. This is used to ensure the proxy ignores its own traffic. If IgnoredGID is specified, this field can be empty.
IgnoredGID - (Required) The group ID (GID) of the proxy container as defined by the user parameter in a container definition. This is used to ensure the proxy ignores its own traffic. If IgnoredUID is specified, this field can be empty.
AppPorts - (Required) The list of ports that the application uses. Network traffic to these ports is forwarded to the ProxyIngressPort and ProxyEgressPort .
ProxyIngressPort - (Required) Specifies the port that incoming traffic to the AppPorts is directed to.
ProxyEgressPort - (Required) Specifies the port that outgoing traffic from the AppPorts is directed to.
EgressIgnoredPorts - (Required) The egress traffic going to the specified ports is ignored and not redirected to the ProxyEgressPort . It can be an empty list.
EgressIgnoredIPs - (Required) The egress traffic going to the specified IP addresses is ignored and not redirected to the ProxyEgressPort . It can be an empty list.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
dict
Response Syntax
{
'taskDefinition': {
'taskDefinitionArn': 'string',
'containerDefinitions': [
{
'name': 'string',
'image': 'string',
'repositoryCredentials': {
'credentialsParameter': 'string'
},
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'links': [
'string',
],
'portMappings': [
{
'containerPort': 123,
'hostPort': 123,
'protocol': 'tcp'|'udp'
},
],
'essential': True|False,
'entryPoint': [
'string',
],
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'mountPoints': [
{
'sourceVolume': 'string',
'containerPath': 'string',
'readOnly': True|False
},
],
'volumesFrom': [
{
'sourceContainer': 'string',
'readOnly': True|False
},
],
'linuxParameters': {
'capabilities': {
'add': [
'string',
],
'drop': [
'string',
]
},
'devices': [
{
'hostPath': 'string',
'containerPath': 'string',
'permissions': [
'read'|'write'|'mknod',
]
},
],
'initProcessEnabled': True|False,
'sharedMemorySize': 123,
'tmpfs': [
{
'containerPath': 'string',
'size': 123,
'mountOptions': [
'string',
]
},
],
'maxSwap': 123,
'swappiness': 123
},
'secrets': [
{
'name': 'string',
'valueFrom': 'string'
},
],
'dependsOn': [
{
'containerName': 'string',
'condition': 'START'|'COMPLETE'|'SUCCESS'|'HEALTHY'
},
],
'startTimeout': 123,
'stopTimeout': 123,
'hostname': 'string',
'user': 'string',
'workingDirectory': 'string',
'disableNetworking': True|False,
'privileged': True|False,
'readonlyRootFilesystem': True|False,
'dnsServers': [
'string',
],
'dnsSearchDomains': [
'string',
],
'extraHosts': [
{
'hostname': 'string',
'ipAddress': 'string'
},
],
'dockerSecurityOptions': [
'string',
],
'interactive': True|False,
'pseudoTerminal': True|False,
'dockerLabels': {
'string': 'string'
},
'ulimits': [
{
'name': 'core'|'cpu'|'data'|'fsize'|'locks'|'memlock'|'msgqueue'|'nice'|'nofile'|'nproc'|'rss'|'rtprio'|'rttime'|'sigpending'|'stack',
'softLimit': 123,
'hardLimit': 123
},
],
'logConfiguration': {
'logDriver': 'json-file'|'syslog'|'journald'|'gelf'|'fluentd'|'awslogs'|'splunk'|'awsfirelens',
'options': {
'string': 'string'
},
'secretOptions': [
{
'name': 'string',
'valueFrom': 'string'
},
]
},
'healthCheck': {
'command': [
'string',
],
'interval': 123,
'timeout': 123,
'retries': 123,
'startPeriod': 123
},
'systemControls': [
{
'namespace': 'string',
'value': 'string'
},
],
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
],
'firelensConfiguration': {
'type': 'fluentd'|'fluentbit',
'options': {
'string': 'string'
}
}
},
],
'family': 'string',
'taskRoleArn': 'string',
'executionRoleArn': 'string',
'networkMode': 'bridge'|'host'|'awsvpc'|'none',
'revision': 123,
'volumes': [
{
'name': 'string',
'host': {
'sourcePath': 'string'
},
'dockerVolumeConfiguration': {
'scope': 'task'|'shared',
'autoprovision': True|False,
'driver': 'string',
'driverOpts': {
'string': 'string'
},
'labels': {
'string': 'string'
}
}
},
],
'status': 'ACTIVE'|'INACTIVE',
'requiresAttributes': [
{
'name': 'string',
'value': 'string',
'targetType': 'container-instance',
'targetId': 'string'
},
],
'placementConstraints': [
{
'type': 'memberOf',
'expression': 'string'
},
],
'compatibilities': [
'EC2'|'FARGATE',
],
'requiresCompatibilities': [
'EC2'|'FARGATE',
],
'cpu': 'string',
'memory': 'string',
'pidMode': 'host'|'task',
'ipcMode': 'host'|'task'|'none',
'proxyConfiguration': {
'type': 'APPMESH',
'containerName': 'string',
'properties': [
{
'name': 'string',
'value': 'string'
},
]
}
},
'tags': [
{
'key': 'string',
'value': 'string'
},
]
}
Response Structure
(dict) --
taskDefinition (dict) --
The full description of the registered task definition.
taskDefinitionArn (string) --
The full Amazon Resource Name (ARN) of the task definition.
containerDefinitions (list) --
A list of container definitions in JSON format that describe the different containers that make up your task. For more information about container definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide .
(dict) --
Container definitions are used in task definitions to describe the different containers that are launched as part of a task.
name (string) --
The name of a container. If you are linking multiple containers together in a task definition, the name of one container can be entered in the links of another container to connect the containers. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. This parameter maps to name in the Create a container section of the Docker Remote API and the --name option to docker run .
image (string) --
The image used to start a container. This string is passed directly to the Docker daemon. Images in the Docker Hub registry are available by default. Other repositories are specified with either `` repository-url /image :tag `` or `` repository-url /image @*digest* `` . Up to 255 letters (uppercase and lowercase), numbers, hyphens, underscores, colons, periods, forward slashes, and number signs are allowed. This parameter maps to Image in the Create a container section of the Docker Remote API and the IMAGE parameter of docker run .
When a new task starts, the Amazon ECS container agent pulls the latest version of the specified image and tag for the container to use. However, subsequent updates to a repository image are not propagated to already running tasks.
Images in Amazon ECR repositories can be specified by either using the full registry/repository:tag or registry/repository@digest . For example, 012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>:latest or 012345678910.dkr.ecr.<region-name>.amazonaws.com/<repository-name>@sha256:94afd1f2e64d908bc90dbca0035a5b567EXAMPLE .
Images in official repositories on Docker Hub use a single name (for example, ubuntu or mongo ).
Images in other repositories on Docker Hub are qualified with an organization name (for example, amazon/amazon-ecs-agent ).
Images in other online repositories are qualified further by a domain name (for example, quay.io/assemblyline/ubuntu ).
repositoryCredentials (dict) --
The private repository authentication credentials to use.
credentialsParameter (string) --
The Amazon Resource Name (ARN) of the secret containing the private repository credentials.
Note
When you are using the Amazon ECS API, AWS CLI, or AWS SDK, if the secret exists in the same Region as the task that you are launching then you can use either the full ARN or the name of the secret. When you are using the AWS Management Console, you must specify the full ARN of the secret.
cpu (integer) --
The number of cpu units reserved for the container. This parameter maps to CpuShares in the Create a container section of the Docker Remote API and the --cpu-shares option to docker run .
This field is optional for tasks using the Fargate launch type, and the only requirement is that the total amount of CPU reserved for all containers within a task be lower than the task-level cpu value.
Note
You can determine the number of CPU units that are available per EC2 instance type by multiplying the vCPUs listed for that instance type on the Amazon EC2 Instances detail page by 1,024.
For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that is the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task would be guaranteed a minimum of 512 CPU units when needed, and each container could float to higher CPU usage if the other container was not using it, but if both tasks were 100% active all of the time, they would be limited to 512 CPU units.
Linux containers share unallocated CPU units with other containers on the container instance with the same ratio as their allocated amount. For example, if you run a single-container task on a single-core instance type with 512 CPU units specified for that container, and that is the only task running on the container instance, that container could use the full 1,024 CPU unit share at any given time. However, if you launched another copy of the same task on that container instance, each task would be guaranteed a minimum of 512 CPU units when needed, and each container could float to higher CPU usage if the other container was not using it, but if both tasks were 100% active all of the time, they would be limited to 512 CPU units.
On Linux container instances, the Docker daemon on the container instance uses the CPU value to calculate the relative CPU share ratios for running containers. For more information, see CPU share constraint in the Docker documentation. The minimum valid CPU share value that the Linux kernel allows is 2. However, the CPU parameter is not required, and you can use CPU values below 2 in your container definitions. For CPU values below 2 (including null), the behavior varies based on your Amazon ECS container agent version:
Agent versions less than or equal to 1.1.0: Null and zero CPU values are passed to Docker as 0, which Docker then converts to 1,024 CPU shares. CPU values of 1 are passed to Docker as 1, which the Linux kernel converts to two CPU shares.
Agent versions greater than or equal to 1.2.0: Null, zero, and CPU values of 1 are passed to Docker as 2.
On Windows container instances, the CPU limit is enforced as an absolute limit, or a quota. Windows containers only have access to the specified amount of CPU that is described in the task definition.
memory (integer) --
The amount (in MiB) of memory to present to the container. If your container attempts to exceed the memory specified here, the container is killed. The total amount of memory reserved for all containers within a task must be lower than the task memory value, if one is specified. This parameter maps to Memory in the Create a container section of the Docker Remote API and the --memory option to docker run .
If your containers are part of a task using the Fargate launch type, this field is optional.
For containers that are part of a task using the EC2 launch type, you must specify a non-zero integer for one or both of memory or memoryReservation in container definitions. If you specify both, memory must be greater than memoryReservation . If you specify memoryReservation , then that value is subtracted from the available memory resources for the container instance on which the container is placed. Otherwise, the value of memory is used.
The Docker daemon reserves a minimum of 4 MiB of memory for a container, so you should not specify fewer than 4 MiB of memory for your containers.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container. When system memory is under heavy contention, Docker attempts to keep the container memory to this soft limit. However, your container can consume more memory when it needs to, up to either the hard limit specified with the memory parameter (if applicable), or all of the available memory on the container instance, whichever comes first. This parameter maps to MemoryReservation in the Create a container section of the Docker Remote API and the --memory-reservation option to docker run .
You must specify a non-zero integer for one or both of memory or memoryReservation in container definitions. If you specify both, memory must be greater than memoryReservation . If you specify memoryReservation , then that value is subtracted from the available memory resources for the container instance on which the container is placed. Otherwise, the value of memory is used.
For example, if your container normally uses 128 MiB of memory, but occasionally bursts to 256 MiB of memory for short periods of time, you can set a memoryReservation of 128 MiB, and a memory hard limit of 300 MiB. This configuration would allow the container to only reserve 128 MiB of memory from the remaining resources on the container instance, but also allow the container to consume more memory resources when needed.
The Docker daemon reserves a minimum of 4 MiB of memory for a container, so you should not specify fewer than 4 MiB of memory for your containers.
links (list) --
The links parameter allows containers to communicate with each other without the need for port mappings. This parameter is only supported if the network mode of a task definition is bridge . The name:internalName construct is analogous to name:alias in Docker links. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. For more information about linking Docker containers, go to Legacy container links in the Docker documentation. This parameter maps to Links in the Create a container section of the Docker Remote API and the --link option to docker run .
Note
This parameter is not supported for Windows containers.
Warning
Containers that are collocated on a single container instance may be able to communicate with each other without requiring links or host port mappings. Network isolation is achieved on the container instance using security groups and VPC settings.
(string) --
portMappings (list) --
The list of port mappings for the container. Port mappings allow containers to access ports on the host container instance to send or receive traffic.
For task definitions that use the awsvpc network mode, you should only specify the containerPort . The hostPort can be left blank or it must be the same value as the containerPort .
Port mappings on Windows use the NetNAT gateway address rather than localhost . There is no loopback for port mappings on Windows, so you cannot access a container's mapped port from the host itself.
This parameter maps to PortBindings in the Create a container section of the Docker Remote API and the --publish option to docker run . If the network mode of a task definition is set to none , then you can't specify port mappings. If the network mode of a task definition is set to host , then host ports must either be undefined or they must match the container port in the port mapping.
Note
After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the Network Bindings section of a container description for a selected task in the Amazon ECS console. The assignments are also visible in the networkBindings section DescribeTasks responses.
(dict) --
Port mappings allow containers to access ports on the host container instance to send or receive traffic. Port mappings are specified as part of the container definition.
If you are using containers in a task with the awsvpc or host network mode, exposed ports should be specified using containerPort . The hostPort can be left blank or it must be the same value as the containerPort .
After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
containerPort (integer) --
The port number on the container that is bound to the user-specified or automatically assigned host port.
If you are using containers in a task with the awsvpc or host network mode, exposed ports should be specified using containerPort .
If you are using containers in a task with the bridge network mode and you specify a container port and not a host port, your container automatically receives a host port in the ephemeral port range. For more information, see hostPort . Port mappings that are automatically assigned in this way do not count toward the 100 reserved ports limit of a container instance.
Warning
You cannot expose the same container port for multiple protocols. An error will be returned if this is attempted.
hostPort (integer) --
The port number on the container instance to reserve for your container.
If you are using containers in a task with the awsvpc or host network mode, the hostPort can either be left blank or set to the same value as the containerPort .
If you are using containers in a task with the bridge network mode, you can specify a non-reserved host port for your container port mapping, or you can omit the hostPort (or set it to 0 ) while specifying a containerPort and your container automatically receives a port in the ephemeral port range for your container instance operating system and Docker version.
The default ephemeral port range for Docker version 1.6.0 and later is listed on the instance under /proc/sys/net/ipv4/ip_local_port_range . If this kernel parameter is unavailable, the default ephemeral port range from 49153 through 65535 is used. Do not attempt to specify a host port in the ephemeral port range as these are reserved for automatic assignment. In general, ports below 32768 are outside of the ephemeral port range.
Note
The default ephemeral port range from 49153 through 65535 is always used for Docker versions before 1.6.0.
The default reserved ports are 22 for SSH, the Docker ports 2375 and 2376, and the Amazon ECS container agent ports 51678-51680. Any host port that was previously specified in a running task is also reserved while the task is running (after a task stops, the host port is released). The current reserved ports are displayed in the remainingResources of DescribeContainerInstances output. A container instance can have up to 100 reserved ports at a time, including the default reserved ports. Automatically assigned ports don't count toward the 100 reserved ports limit.
protocol (string) --
The protocol used for the port mapping. Valid values are tcp and udp . The default is tcp .
essential (boolean) --
If the essential parameter of a container is marked as true , and that container fails or stops for any reason, all other containers that are part of the task are stopped. If the essential parameter of a container is marked as false , then its failure does not affect the rest of the containers in a task. If this parameter is omitted, a container is assumed to be essential.
All tasks must have at least one essential container. If you have an application that is composed of multiple containers, you should group containers that are used for a common purpose into components, and separate the different components into multiple task definitions. For more information, see Application Architecture in the Amazon Elastic Container Service Developer Guide .
entryPoint (list) --
Warning
Early versions of the Amazon ECS container agent do not properly handle entryPoint parameters. If you have problems using entryPoint , update your container agent or enter your commands and arguments as command array items instead.
The entry point that is passed to the container. This parameter maps to Entrypoint in the Create a container section of the Docker Remote API and the --entrypoint option to docker run . For more information, see https://docs.docker.com/engine/reference/builder/#entrypoint .
(string) --
command (list) --
The command that is passed to the container. This parameter maps to Cmd in the Create a container section of the Docker Remote API and the COMMAND parameter to docker run . For more information, see https://docs.docker.com/engine/reference/builder/#cmd . If there are multiple arguments, each argument should be a separated string in the array.
(string) --
environment (list) --
The environment variables to pass to a container. This parameter maps to Env in the Create a container section of the Docker Remote API and the --env option to docker run .
Warning
We do not recommend using plaintext environment variables for sensitive information, such as credential data.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
mountPoints (list) --
The mount points for data volumes in your container.
This parameter maps to Volumes in the Create a container section of the Docker Remote API and the --volume option to docker run .
Windows containers can mount whole directories on the same drive as $env:ProgramData . Windows containers cannot mount directories on a different drive, and mount point cannot be across drives.
(dict) --
Details on a volume mount point that is used in a container definition.
sourceVolume (string) --
The name of the volume to mount. Must be a volume name referenced in the name parameter of task definition volume .
containerPath (string) --
The path on the container to mount the host volume at.
readOnly (boolean) --
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. The default value is false .
volumesFrom (list) --
Data volumes to mount from another container. This parameter maps to VolumesFrom in the Create a container section of the Docker Remote API and the --volumes-from option to docker run .
(dict) --
Details on a data volume from another container in the same task definition.
sourceContainer (string) --
The name of another container within the same task definition from which to mount volumes.
readOnly (boolean) --
If this value is true , the container has read-only access to the volume. If this value is false , then the container can write to the volume. The default value is false .
linuxParameters (dict) --
Linux-specific modifications that are applied to the container, such as Linux kernel capabilities. For more information see KernelCapabilities .
Note
This parameter is not supported for Windows containers.
capabilities (dict) --
The Linux capabilities for the container that are added to or dropped from the default configuration provided by Docker.
Note
If you are using tasks that use the Fargate launch type, capabilities is supported but the add parameter is not supported.
add (list) --
The Linux capabilities for the container that have been added to the default configuration provided by Docker. This parameter maps to CapAdd in the Create a container section of the Docker Remote API and the --cap-add option to docker run .
Note
If you are using tasks that use the Fargate launch type, the add parameter is not supported.
Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
(string) --
drop (list) --
The Linux capabilities for the container that have been removed from the default configuration provided by Docker. This parameter maps to CapDrop in the Create a container section of the Docker Remote API and the --cap-drop option to docker run .
Valid values: "ALL" | "AUDIT_CONTROL" | "AUDIT_WRITE" | "BLOCK_SUSPEND" | "CHOWN" | "DAC_OVERRIDE" | "DAC_READ_SEARCH" | "FOWNER" | "FSETID" | "IPC_LOCK" | "IPC_OWNER" | "KILL" | "LEASE" | "LINUX_IMMUTABLE" | "MAC_ADMIN" | "MAC_OVERRIDE" | "MKNOD" | "NET_ADMIN" | "NET_BIND_SERVICE" | "NET_BROADCAST" | "NET_RAW" | "SETFCAP" | "SETGID" | "SETPCAP" | "SETUID" | "SYS_ADMIN" | "SYS_BOOT" | "SYS_CHROOT" | "SYS_MODULE" | "SYS_NICE" | "SYS_PACCT" | "SYS_PTRACE" | "SYS_RAWIO" | "SYS_RESOURCE" | "SYS_TIME" | "SYS_TTY_CONFIG" | "SYSLOG" | "WAKE_ALARM"
(string) --
devices (list) --
Any host devices to expose to the container. This parameter maps to Devices in the Create a container section of the Docker Remote API and the --device option to docker run .
Note
If you are using tasks that use the Fargate launch type, the devices parameter is not supported.
(dict) --
An object representing a container instance host device.
hostPath (string) --
The path for the device on the host container instance.
containerPath (string) --
The path inside the container at which to expose the host device.
permissions (list) --
The explicit permissions to provide to the container for the device. By default, the container has permissions for read , write , and mknod for the device.
(string) --
initProcessEnabled (boolean) --
Run an init process inside the container that forwards signals and reaps processes. This parameter maps to the --init option to docker run . This parameter requires version 1.25 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
sharedMemorySize (integer) --
The value for the size (in MiB) of the /dev/shm volume. This parameter maps to the --shm-size option to docker run .
Note
If you are using tasks that use the Fargate launch type, the sharedMemorySize parameter is not supported.
tmpfs (list) --
The container path, mount options, and size (in MiB) of the tmpfs mount. This parameter maps to the --tmpfs option to docker run .
Note
If you are using tasks that use the Fargate launch type, the tmpfs parameter is not supported.
(dict) --
The container path, mount options, and size of the tmpfs mount.
containerPath (string) --
The absolute file path where the tmpfs volume is to be mounted.
size (integer) --
The size (in MiB) of the tmpfs volume.
mountOptions (list) --
The list of tmpfs volume mount options.
Valid values: "defaults" | "ro" | "rw" | "suid" | "nosuid" | "dev" | "nodev" | "exec" | "noexec" | "sync" | "async" | "dirsync" | "remount" | "mand" | "nomand" | "atime" | "noatime" | "diratime" | "nodiratime" | "bind" | "rbind" | "unbindable" | "runbindable" | "private" | "rprivate" | "shared" | "rshared" | "slave" | "rslave" | "relatime" | "norelatime" | "strictatime" | "nostrictatime" | "mode" | "uid" | "gid" | "nr_inodes" | "nr_blocks" | "mpol"
(string) --
maxSwap (integer) --
The total amount of swap memory (in MiB) a container can use. This parameter will be translated to the --memory-swap option to docker run where the value would be the sum of the container memory plus the maxSwap value.
If a maxSwap value of 0 is specified, the container will not use swap. Accepted values are 0 or any positive integer. If the maxSwap parameter is omitted, the container will use the swap configuration for the container instance it is running on. A maxSwap value must be set for the swappiness parameter to be used.
Note
If you are using tasks that use the Fargate launch type, the maxSwap parameter is not supported.
swappiness (integer) --
This allows you to tune a container's memory swappiness behavior. A swappiness value of 0 will cause swapping to not happen unless absolutely necessary. A swappiness value of 100 will cause pages to be swapped very aggressively. Accepted values are whole numbers between 0 and 100 . If the swappiness parameter is not specified, a default value of 60 is used. If a value is not specified for maxSwap then this parameter is ignored. This parameter maps to the --memory-swappiness option to docker run .
Note
If you are using tasks that use the Fargate launch type, the swappiness parameter is not supported.
secrets (list) --
The secrets to pass to the container. For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
(dict) --
An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:
To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.
To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.
For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
name (string) --
The name of the secret.
valueFrom (string) --
The secret to expose to the container. The supported values are either the full ARN of the AWS Secrets Manager secret or the full ARN of the parameter in the AWS Systems Manager Parameter Store.
Note
If the AWS Systems Manager Parameter Store parameter exists in the same Region as the task you are launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.
dependsOn (list) --
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies. When a dependency is defined for container startup, for container shutdown it is reversed.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent to enable container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
(dict) --
The dependencies defined for container startup and shutdown. A container can contain multiple dependencies. When a dependency is defined for container startup, for container shutdown it is reversed.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent to enable container dependencies. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
Note
If you are using tasks that use the Fargate launch type, container dependency parameters are not supported.
containerName (string) --
The name of a container.
condition (string) --
The dependency condition of the container. The following are the available conditions and their behavior:
START - This condition emulates the behavior of links and volumes today. It validates that a dependent container is started before permitting other containers to start.
COMPLETE - This condition validates that a dependent container runs to completion (exits) before permitting other containers to start. This can be useful for nonessential containers that run a script and then exit.
SUCCESS - This condition is the same as COMPLETE , but it also requires that the container exits with a zero status.
HEALTHY - This condition validates that the dependent container passes its Docker health check before permitting other containers to start. This requires that the dependent container has health checks configured. This condition is confirmed only at task startup.
startTimeout (integer) --
Time duration (in seconds) to wait before giving up on resolving dependencies for a container. For example, you specify two containers in a task definition with containerA having a dependency on containerB reaching a COMPLETE , SUCCESS , or HEALTHY status. If a startTimeout value is specified for containerB and it does not reach the desired status within that time then containerA will give up and not start. This results in the task transitioning to a STOPPED state.
For tasks using the EC2 launch type, the container instances require at least version 1.26.0 of the container agent to enable a container start timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
stopTimeout (integer) --
Time duration (in seconds) to wait before the container is forcefully killed if it doesn't exit normally on its own. For tasks using the Fargate launch type, the max stopTimeout value is 2 minutes. This parameter is available for tasks using the Fargate launch type in the Ohio (us-east-2) region only and the task or service requires platform version 1.3.0 or later.
For tasks using the EC2 launch type, the stop timeout value for the container takes precedence over the ECS_CONTAINER_STOP_TIMEOUT container agent configuration parameter, if used. Container instances require at least version 1.26.0 of the container agent to enable a container stop timeout value. However, we recommend using the latest container agent version. For information about checking your agent version and updating to the latest version, see Updating the Amazon ECS Container Agent in the Amazon Elastic Container Service Developer Guide . If you are using an Amazon ECS-optimized Linux AMI, your instance needs at least version 1.26.0-1 of the ecs-init package. If your container instances are launched from version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
hostname (string) --
The hostname to use for your container. This parameter maps to Hostname in the Create a container section of the Docker Remote API and the --hostname option to docker run .
Note
The hostname parameter is not supported if you are using the awsvpc network mode.
user (string) --
The user name to use inside the container. This parameter maps to User in the Create a container section of the Docker Remote API and the --user option to docker run .
You can use the following formats. If specifying a UID or GID, you must specify it as a positive integer.
user
user:group
uid
uid:gid
user:gid
uid:group
Note
This parameter is not supported for Windows containers.
workingDirectory (string) --
The working directory in which to run commands inside the container. This parameter maps to WorkingDir in the Create a container section of the Docker Remote API and the --workdir option to docker run .
disableNetworking (boolean) --
When this parameter is true, networking is disabled within the container. This parameter maps to NetworkDisabled in the Create a container section of the Docker Remote API .
Note
This parameter is not supported for Windows containers.
privileged (boolean) --
When this parameter is true, the container is given elevated privileges on the host container instance (similar to the root user). This parameter maps to Privileged in the Create a container section of the Docker Remote API and the --privileged option to docker run .
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
readonlyRootFilesystem (boolean) --
When this parameter is true, the container is given read-only access to its root file system. This parameter maps to ReadonlyRootfs in the Create a container section of the Docker Remote API and the --read-only option to docker run .
Note
This parameter is not supported for Windows containers.
dnsServers (list) --
A list of DNS servers that are presented to the container. This parameter maps to Dns in the Create a container section of the Docker Remote API and the --dns option to docker run .
Note
This parameter is not supported for Windows containers.
(string) --
dnsSearchDomains (list) --
A list of DNS search domains that are presented to the container. This parameter maps to DnsSearch in the Create a container section of the Docker Remote API and the --dns-search option to docker run .
Note
This parameter is not supported for Windows containers.
(string) --
extraHosts (list) --
A list of hostnames and IP address mappings to append to the /etc/hosts file on the container. This parameter maps to ExtraHosts in the Create a container section of the Docker Remote API and the --add-host option to docker run .
Note
This parameter is not supported for Windows containers or tasks that use the awsvpc network mode.
(dict) --
Hostnames and IP address entries that are added to the /etc/hosts file of a container via the extraHosts parameter of its ContainerDefinition .
hostname (string) --
The hostname to use in the /etc/hosts entry.
ipAddress (string) --
The IP address to use in the /etc/hosts entry.
dockerSecurityOptions (list) --
A list of strings to provide custom labels for SELinux and AppArmor multi-level security systems. This field is not valid for containers in tasks using the Fargate launch type.
This parameter maps to SecurityOpt in the Create a container section of the Docker Remote API and the --security-opt option to docker run .
Note
The Amazon ECS container agent running on a container instance must register with the ECS_SELINUX_CAPABLE=true or ECS_APPARMOR_CAPABLE=true environment variables before containers placed on that instance can use these security options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide .
Note
This parameter is not supported for Windows containers.
(string) --
interactive (boolean) --
When this parameter is true , this allows you to deploy containerized applications that require stdin or a tty to be allocated. This parameter maps to OpenStdin in the Create a container section of the Docker Remote API and the --interactive option to docker run .
pseudoTerminal (boolean) --
When this parameter is true , a TTY is allocated. This parameter maps to Tty in the Create a container section of the Docker Remote API and the --tty option to docker run .
dockerLabels (dict) --
A key/value map of labels to add to the container. This parameter maps to Labels in the Create a container section of the Docker Remote API and the --label option to docker run . This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
(string) --
(string) --
ulimits (list) --
A list of ulimits to set in the container. This parameter maps to Ulimits in the Create a container section of the Docker Remote API and the --ulimit option to docker run . Valid naming values are displayed in the Ulimit data type. This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
Note
This parameter is not supported for Windows containers.
(dict) --
The ulimit settings to pass to the container.
name (string) --
The type of the ulimit .
softLimit (integer) --
The soft limit for the ulimit type.
hardLimit (integer) --
The hard limit for the ulimit type.
logConfiguration (dict) --
The log configuration specification for the container.
This parameter maps to LogConfig in the Create a container section of the Docker Remote API and the --log-driver option to docker run . By default, containers use the same logging driver that the Docker daemon uses. However the container may use a different logging driver than the Docker daemon by specifying a log driver with this parameter in the container definition. To use a different logging driver for a container, the log system must be configured properly on the container instance (or on a different log server for remote logging options). For more information on the options for different supported log drivers, see Configure logging drivers in the Docker documentation.
Note
Amazon ECS currently supports a subset of the logging drivers available to the Docker daemon (shown in the LogConfiguration data type). Additional log drivers may be available in future releases of the Amazon ECS container agent.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
Note
The Amazon ECS container agent running on a container instance must register the logging drivers available on that instance with the ECS_AVAILABLE_LOGGING_DRIVERS environment variable before containers placed on that instance can use these log configuration options. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide .
logDriver (string) --
The log driver to use for the container. The valid values listed for this parameter are log drivers that the Amazon ECS container agent can communicate with by default.
For tasks using the Fargate launch type, the supported log drivers are awslogs and splunk .
For tasks using the EC2 launch type, the supported log drivers are awslogs , fluentd , gelf , json-file , journald , logentries , syslog , splunk , and syslog .
For more information about using the awslogs log driver, see Using the awslogs Log Driver in the Amazon Elastic Container Service Developer Guide .
Note
If you have a custom driver that is not listed above that you would like to work with the Amazon ECS container agent, you can fork the Amazon ECS container agent project that is available on GitHub and customize it to work with that driver. We encourage you to submit pull requests for changes that you would like to have included. However, Amazon Web Services does not currently support running modified copies of this software.
This parameter requires version 1.18 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
options (dict) --
The configuration options to send to the log driver. This parameter requires version 1.19 of the Docker Remote API or greater on your container instance. To check the Docker Remote API version on your container instance, log in to your container instance and run the following command: sudo docker version --format '{{.Server.APIVersion}}'
(string) --
(string) --
secretOptions (list) --
The secrets to pass to the log configuration.
(dict) --
An object representing the secret to expose to your container. Secrets can be exposed to a container in the following ways:
To inject sensitive data into your containers as environment variables, use the secrets container definition parameter.
To reference sensitive information in the log configuration of a container, use the secretOptions container definition parameter.
For more information, see Specifying Sensitive Data in the Amazon Elastic Container Service Developer Guide .
name (string) --
The name of the secret.
valueFrom (string) --
The secret to expose to the container. The supported values are either the full ARN of the AWS Secrets Manager secret or the full ARN of the parameter in the AWS Systems Manager Parameter Store.
Note
If the AWS Systems Manager Parameter Store parameter exists in the same Region as the task you are launching, then you can use either the full ARN or name of the parameter. If the parameter exists in a different Region, then the full ARN must be specified.
healthCheck (dict) --
The health check command and associated configuration parameters for the container. This parameter maps to HealthCheck in the Create a container section of the Docker Remote API and the HEALTHCHECK parameter of docker run .
command (list) --
A string array representing the command that the container runs to determine if it is healthy. The string array must start with CMD to execute the command arguments directly, or CMD-SHELL to run the command with the container's default shell. For example:
[ "CMD-SHELL", "curl -f http://localhost/ || exit 1" ]
An exit code of 0 indicates success, and non-zero exit code indicates failure. For more information, see HealthCheck in the Create a container section of the Docker Remote API .
(string) --
interval (integer) --
The time period in seconds between each health check execution. You may specify between 5 and 300 seconds. The default value is 30 seconds.
timeout (integer) --
The time period in seconds to wait for a health check to succeed before it is considered a failure. You may specify between 2 and 60 seconds. The default value is 5.
retries (integer) --
The number of times to retry a failed health check before the container is considered unhealthy. You may specify between 1 and 10 retries. The default value is 3.
startPeriod (integer) --
The optional grace period within which to provide containers time to bootstrap before failed health checks count towards the maximum number of retries. You may specify between 0 and 300 seconds. The startPeriod is disabled by default.
Note
If a health check succeeds within the startPeriod , then the container is considered healthy and any subsequent failures count toward the maximum number of retries.
systemControls (list) --
A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run .
Note
It is not recommended that you specify network-related systemControls parameters for multiple containers in a single task that also uses either the awsvpc or host network modes. For tasks that use the awsvpc network mode, the container that is started last determines which systemControls parameters take effect. For tasks that use the host network mode, it changes the container instance's namespaced kernel parameters as well as the containers.
(dict) --
A list of namespaced kernel parameters to set in the container. This parameter maps to Sysctls in the Create a container section of the Docker Remote API and the --sysctl option to docker run .
It is not recommended that you specify network-related systemControls parameters for multiple containers in a single task that also uses either the awsvpc or host network mode for the following reasons:
For tasks that use the awsvpc network mode, if you set systemControls for any container, it applies to all containers in the task. If you set different systemControls for multiple containers in a single task, the container that is started last determines which systemControls take effect.
For tasks that use the host network mode, the systemControls parameter applies to the container instance's kernel parameter as well as that of all containers of any tasks running on that container instance.
namespace (string) --
The namespaced kernel parameter for which to set a value .
value (string) --
The value for the namespaced kernel parameter specified in namespace .
resourceRequirements (list) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) --
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) --
The type of resource to assign to a container. The only supported value is GPU .
firelensConfiguration (dict) --
The FireLens configuration for the container. This is used to specify and configure a log router for container logs.
type (string) --
The log router to use. The valid values are fluentd or fluentbit .
options (dict) --
The options to use when configuring the log router. This field is optional and can be used to add additional metadata, such as the task, task definition, cluster, and container instance details to the log event. If specified, the syntax to use is "options":{"enable-ecs-log-metadata":"true|false"} .
(string) --
(string) --
family (string) --
The name of a family that this task definition is registered to. A family groups multiple versions of a task definition. Amazon ECS gives the first task definition that you registered to a family a revision number of 1. Amazon ECS gives sequential revision numbers to each task definition that you add.
taskRoleArn (string) --
The short name or full Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that grants containers in the task permission to call AWS APIs on your behalf. For more information, see Amazon ECS Task Role in the Amazon Elastic Container Service Developer Guide .
IAM roles for tasks on Windows require that the -EnableTaskIAMRole option is set when you launch the Amazon ECS-optimized Windows AMI. Your containers must also run some configuration code in order to take advantage of the feature. For more information, see Windows IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide .
executionRoleArn (string) --
The Amazon Resource Name (ARN) of the task execution role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role.
networkMode (string) --
The Docker networking mode to use for the containers in the task. The valid values are none , bridge , awsvpc , and host . The default Docker network mode is bridge . If you are using the Fargate launch type, the awsvpc network mode is required. If you are using the EC2 launch type, any network mode can be used. If the network mode is set to none , you cannot specify port mappings in your container definitions, and the tasks containers do not have external connectivity. The host and awsvpc network modes offer the highest networking performance for containers because they use the EC2 network stack instead of the virtualized network stack provided by the bridge mode.
With the host and awsvpc network modes, exposed container ports are mapped directly to the corresponding host port (for the host network mode) or the attached elastic network interface port (for the awsvpc network mode), so you cannot take advantage of dynamic host port mappings.
If the network mode is awsvpc , the task is allocated an elastic network interface, and you must specify a NetworkConfiguration value when you create a service or run a task with the task definition. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide .
Note
Currently, only Amazon ECS-optimized AMIs, other Amazon Linux variants with the ecs-init package, or AWS Fargate infrastructure support the awsvpc network mode.
If the network mode is host , you cannot run multiple instantiations of the same task on a single container instance when port mappings are used.
Docker for Windows uses different network modes than Docker for Linux. When you register a task definition with Windows containers, you must not specify a network mode. If you use the console to register a task definition with Windows containers, you must choose the <default> network mode object.
For more information, see Network settings in the Docker run reference .
revision (integer) --
The revision of the task in a particular family. The revision is a version number of a task definition in a family. When you register a task definition for the first time, the revision is 1 . Each time that you register a new revision of a task definition in the same family, the revision value always increases by one, even if you have deregistered previous revisions in this family.
volumes (list) --
The list of volume definitions for the task.
If your tasks are using the Fargate launch type, the host and sourcePath parameters are not supported.
For more information about volume definition parameters and defaults, see Amazon ECS Task Definitions in the Amazon Elastic Container Service Developer Guide .
(dict) --
A data volume used in a task definition. For tasks that use a Docker volume, specify a DockerVolumeConfiguration . For tasks that use a bind mount host volume, specify a host and optional sourcePath . For more information, see Using Data Volumes in Tasks .
name (string) --
The name of the volume. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. This name is referenced in the sourceVolume parameter of container definition mountPoints .
host (dict) --
This parameter is specified when you are using bind mount host volumes. Bind mount host volumes are supported when you are using either the EC2 or Fargate launch types. The contents of the host parameter determine whether your bind mount host volume persists on the host container instance and where it is stored. If the host parameter is empty, then the Docker daemon assigns a host path for your data volume. However, the data is not guaranteed to persist after the containers associated with it stop running.
Windows containers can mount whole directories on the same drive as $env:ProgramData . Windows containers cannot mount directories on a different drive, and mount point cannot be across drives. For example, you can mount C:\my\path:C:\my\path and D:\:D:\ , but not D:\my\path:C:\my\path or D:\:C:\my\path .
sourcePath (string) --
When the host parameter is used, specify a sourcePath to declare the path on the host container instance that is presented to the container. If this parameter is empty, then the Docker daemon has assigned a host path for you. If the host parameter contains a sourcePath file location, then the data volume persists at the specified location on the host container instance until you delete it manually. If the sourcePath value does not exist on the host container instance, the Docker daemon creates it. If the location does exist, the contents of the source path folder are exported.
If you are using the Fargate launch type, the sourcePath parameter is not supported.
dockerVolumeConfiguration (dict) --
This parameter is specified when you are using Docker volumes. Docker volumes are only supported when you are using the EC2 launch type. Windows containers only support the use of the local driver. To use bind mounts, specify a host instead.
scope (string) --
The scope for the Docker volume that determines its lifecycle. Docker volumes that are scoped to a task are automatically provisioned when the task starts and destroyed when the task stops. Docker volumes that are scoped as shared persist after the task stops.
autoprovision (boolean) --
If this value is true , the Docker volume is created if it does not already exist.
Note
This field is only used if the scope is shared .
driver (string) --
The Docker volume driver to use. The driver value must match the driver name provided by Docker because it is used for task placement. If the driver was installed using the Docker plugin CLI, use docker plugin ls to retrieve the driver name from your container instance. If the driver was installed using another method, use Docker plugin discovery to retrieve the driver name. For more information, see Docker plugin discovery . This parameter maps to Driver in the Create a volume section of the Docker Remote API and the xxdriver option to docker volume create .
driverOpts (dict) --
A map of Docker driver-specific options passed through. This parameter maps to DriverOpts in the Create a volume section of the Docker Remote API and the xxopt option to docker volume create .
(string) --
(string) --
labels (dict) --
Custom metadata to add to your Docker volume. This parameter maps to Labels in the Create a volume section of the Docker Remote API and the xxlabel option to docker volume create .
(string) --
(string) --
status (string) --
The status of the task definition.
requiresAttributes (list) --
The container instance attributes required by your task. This field is not valid if you are using the Fargate launch type for your task.
(dict) --
An attribute is a name-value pair associated with an Amazon ECS object. Attributes enable you to extend the Amazon ECS data model by adding custom metadata to your resources. For more information, see Attributes in the Amazon Elastic Container Service Developer Guide .
name (string) --
The name of the attribute. Up to 128 letters (uppercase and lowercase), numbers, hyphens, underscores, and periods are allowed.
value (string) --
The value of the attribute. Up to 128 letters (uppercase and lowercase), numbers, hyphens, underscores, periods, at signs (@), forward slashes, colons, and spaces are allowed.
targetType (string) --
The type of the target with which to attach the attribute. This parameter is required if you use the short form ID for a resource instead of the full ARN.
targetId (string) --
The ID of the target. You can specify the short form ID for a resource or the full Amazon Resource Name (ARN).
placementConstraints (list) --
An array of placement constraint objects to use for tasks. This field is not valid if you are using the Fargate launch type for your task.
(dict) --
An object representing a constraint on task placement in the task definition.
If you are using the Fargate launch type, task placement constraints are not supported.
For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of constraint. The DistinctInstance constraint ensures that each task in a particular group is running on a different container instance. The MemberOf constraint restricts selection to be from a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
compatibilities (list) --
The launch type to use with your task. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
(string) --
requiresCompatibilities (list) --
The launch type the task requires. If no value is specified, it will default to EC2 . Valid values include EC2 and FARGATE .
(string) --
cpu (string) --
The number of cpu units used by the task. If you are using the EC2 launch type, this field is optional and any value can be used. If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of valid values for the memory parameter:
256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)
512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)
1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
2048 (2 vCPU) - Available memory values: Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)
4096 (4 vCPU) - Available memory values: Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)
memory (string) --
The amount (in MiB) of memory used by the task. If using the EC2 launch type, this field is optional and any value can be used. If using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of valid values for the cpu parameter:
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)
pidMode (string) --
The process namespace to use for the containers in the task. The valid values are host or task . If host is specified, then all containers within the tasks that specified the host PID mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same process namespace. If no value is specified, the default is a private namespace. For more information, see PID settings in the Docker run reference .
If the host PID mode is used, be aware that there is a heightened risk of undesired process namespace expose. For more information, see Docker security .
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
ipcMode (string) --
The IPC resource namespace to use for the containers in the task. The valid values are host , task , or none . If host is specified, then all containers within the tasks that specified the host IPC mode on the same container instance share the same IPC resources with the host Amazon EC2 instance. If task is specified, all containers within the specified task share the same IPC resources. If none is specified, then IPC resources within the containers of a task are private and not shared with other containers in a task or on the container instance. If no value is specified, then the IPC resource namespace sharing depends on the Docker daemon setting on the container instance. For more information, see IPC settings in the Docker run reference .
If the host IPC mode is used, be aware that there is a heightened risk of undesired IPC namespace expose. For more information, see Docker security .
If you are setting namespaced kernel parameters using systemControls for the containers in the task, the following will apply to your IPC resource namespace. For more information, see System Controls in the Amazon Elastic Container Service Developer Guide .
For tasks that use the host IPC mode, IPC namespace related systemControls are not supported.
For tasks that use the task IPC mode, IPC namespace related systemControls will apply to all containers within a task.
Note
This parameter is not supported for Windows containers or tasks using the Fargate launch type.
proxyConfiguration (dict) --
The configuration details for the App Mesh proxy.
Your Amazon ECS container instances require at least version 1.26.0 of the container agent and at least version 1.26.0-1 of the ecs-init package to enable a proxy configuration. If your container instances are launched from the Amazon ECS-optimized AMI version 20190301 or later, then they contain the required versions of the container agent and ecs-init . For more information, see Amazon ECS-optimized Linux AMI in the Amazon Elastic Container Service Developer Guide .
type (string) --
The proxy type. The only supported value is APPMESH .
containerName (string) --
The name of the container that will serve as the App Mesh proxy.
properties (list) --
The set of network configuration parameters to provide the Container Network Interface (CNI) plugin, specified as key-value pairs.
IgnoredUID - (Required) The user ID (UID) of the proxy container as defined by the user parameter in a container definition. This is used to ensure the proxy ignores its own traffic. If IgnoredGID is specified, this field can be empty.
IgnoredGID - (Required) The group ID (GID) of the proxy container as defined by the user parameter in a container definition. This is used to ensure the proxy ignores its own traffic. If IgnoredUID is specified, this field can be empty.
AppPorts - (Required) The list of ports that the application uses. Network traffic to these ports is forwarded to the ProxyIngressPort and ProxyEgressPort .
ProxyIngressPort - (Required) Specifies the port that incoming traffic to the AppPorts is directed to.
ProxyEgressPort - (Required) Specifies the port that outgoing traffic from the AppPorts is directed to.
EgressIgnoredPorts - (Required) The egress traffic going to the specified ports is ignored and not redirected to the ProxyEgressPort . It can be an empty list.
EgressIgnoredIPs - (Required) The egress traffic going to the specified IP addresses is ignored and not redirected to the ProxyEgressPort . It can be an empty list.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
tags (list) --
The list of tags associated with the task definition.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
{'tasks': {'containers': {'firelensConfiguration': {'options': {'string': 'string'},
'type': 'fluentd | '
'fluentbit'}}}}
Starts a new task using the specified task definition.
You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using placement constraints and placement strategies. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide .
Alternatively, you can use StartTask to use your own scheduler or place tasks manually on specific container instances.
The Amazon ECS API follows an eventual consistency model, due to the distributed nature of the system supporting the API. This means that the result of an API command you run that affects your Amazon ECS resources might not be immediately visible to all subsequent commands you run. Keep this in mind when you carry out an API command that immediately follows a previous API command.
To manage eventual consistency, you can do the following:
Confirm the state of the resource before you run a command to modify it. Run the DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough time for the previous command to propagate through the system. To do this, run the DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing gradually up to five minutes of wait time.
Add wait time between subsequent commands, even if the DescribeTasks command returns an accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of wait time, and increase gradually up to about five minutes of wait time.
See also: AWS API Documentation
Request Syntax
client.run_task(
cluster='string',
taskDefinition='string',
overrides={
'containerOverrides': [
{
'name': 'string',
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
]
},
],
'taskRoleArn': 'string',
'executionRoleArn': 'string'
},
count=123,
startedBy='string',
group='string',
placementConstraints=[
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
placementStrategy=[
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
launchType='EC2'|'FARGATE',
platformVersion='string',
networkConfiguration={
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
tags=[
{
'key': 'string',
'value': 'string'
},
],
enableECSManagedTags=True|False,
propagateTags='TASK_DEFINITION'|'SERVICE'
)
string
The short name or full Amazon Resource Name (ARN) of the cluster on which to run your task. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The family and revision (family:revision ) or full ARN of the task definition to run. If a revision is not specified, the latest ACTIVE revision is used.
dict
A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that is specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.
Note
A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.
containerOverrides (list) --
One or more container overrides sent to a task.
(dict) --
The overrides that should be sent to a container. An empty container override can be passed in. An example of an empty container override would be {"containerOverrides": [ ] } . If a non-empty container override is specified, the name parameter must be included.
name (string) --
The name of the container that receives the override. This parameter is required if any override is specified.
command (list) --
The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
(string) --
environment (list) --
The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
cpu (integer) --
The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.
memory (integer) --
The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.
resourceRequirements (list) --
The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) -- [REQUIRED]
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) -- [REQUIRED]
The type of resource to assign to a container. The only supported value is GPU .
taskRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role.
executionRoleArn (string) --
The Amazon Resource Name (ARN) of the task execution role that the Amazon ECS container agent and the Docker daemon can assume.
integer
The number of instantiations of the specified task to place on your cluster. You can specify up to 10 tasks per call.
string
An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed.
If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
string
The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).
list
An array of placement constraint objects to use for the task. You can specify up to 10 constraints per task (including constraints in the task definition and those specified at runtime).
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance . For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
list
The placement strategy objects to use for the task. You can specify a maximum of five strategy rules per task.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone . For the binpack placement strategy, valid values are cpu and memory . For the random placement strategy, this field is not used.
string
The launch type on which to run your task. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
string
The platform version the task should run. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
dict
The network configuration for the task. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it is not supported for other network modes. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide .
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) -- [REQUIRED]
The subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
list
The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
boolean
Specifies whether to enable Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide .
string
Specifies whether to propagate the tags from the task definition to the task. If no value is specified, the tags are not propagated. Tags can only be propagated to the task during task creation. To add tags to a task after task creation, use the TagResource API action.
Note
An error will be received if you specify the SERVICE option when running a task.
dict
Response Syntax
{
'tasks': [
{
'taskArn': 'string',
'clusterArn': 'string',
'taskDefinitionArn': 'string',
'containerInstanceArn': 'string',
'overrides': {
'containerOverrides': [
{
'name': 'string',
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
]
},
],
'taskRoleArn': 'string',
'executionRoleArn': 'string'
},
'lastStatus': 'string',
'desiredStatus': 'string',
'cpu': 'string',
'memory': 'string',
'containers': [
{
'containerArn': 'string',
'taskArn': 'string',
'name': 'string',
'runtimeId': 'string',
'lastStatus': 'string',
'exitCode': 123,
'reason': 'string',
'networkBindings': [
{
'bindIP': 'string',
'containerPort': 123,
'hostPort': 123,
'protocol': 'tcp'|'udp'
},
],
'networkInterfaces': [
{
'attachmentId': 'string',
'privateIpv4Address': 'string',
'ipv6Address': 'string'
},
],
'healthStatus': 'HEALTHY'|'UNHEALTHY'|'UNKNOWN',
'cpu': 'string',
'memory': 'string',
'memoryReservation': 'string',
'gpuIds': [
'string',
],
'firelensConfiguration': {
'type': 'fluentd'|'fluentbit',
'options': {
'string': 'string'
}
}
},
],
'startedBy': 'string',
'version': 123,
'stoppedReason': 'string',
'stopCode': 'TaskFailedToStart'|'EssentialContainerExited'|'UserInitiated',
'connectivity': 'CONNECTED'|'DISCONNECTED',
'connectivityAt': datetime(2015, 1, 1),
'pullStartedAt': datetime(2015, 1, 1),
'pullStoppedAt': datetime(2015, 1, 1),
'executionStoppedAt': datetime(2015, 1, 1),
'createdAt': datetime(2015, 1, 1),
'startedAt': datetime(2015, 1, 1),
'stoppingAt': datetime(2015, 1, 1),
'stoppedAt': datetime(2015, 1, 1),
'group': 'string',
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'attachments': [
{
'id': 'string',
'type': 'string',
'status': 'string',
'details': [
{
'name': 'string',
'value': 'string'
},
]
},
],
'healthStatus': 'HEALTHY'|'UNHEALTHY'|'UNKNOWN',
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
],
'failures': [
{
'arn': 'string',
'reason': 'string'
},
]
}
Response Structure
(dict) --
tasks (list) --
A full description of the tasks that were run. The tasks that were successfully placed on your cluster are described here.
(dict) --
Details on a task in a cluster.
taskArn (string) --
The Amazon Resource Name (ARN) of the task.
clusterArn (string) --
The ARN of the cluster that hosts the task.
taskDefinitionArn (string) --
The ARN of the task definition that creates the task.
containerInstanceArn (string) --
The ARN of the container instances that host the task.
overrides (dict) --
One or more container overrides.
containerOverrides (list) --
One or more container overrides sent to a task.
(dict) --
The overrides that should be sent to a container. An empty container override can be passed in. An example of an empty container override would be {"containerOverrides": [ ] } . If a non-empty container override is specified, the name parameter must be included.
name (string) --
The name of the container that receives the override. This parameter is required if any override is specified.
command (list) --
The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
(string) --
environment (list) --
The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
cpu (integer) --
The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.
memory (integer) --
The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.
resourceRequirements (list) --
The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) --
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) --
The type of resource to assign to a container. The only supported value is GPU .
taskRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role.
executionRoleArn (string) --
The Amazon Resource Name (ARN) of the task execution role that the Amazon ECS container agent and the Docker daemon can assume.
lastStatus (string) --
The last known status of the task. For more information, see Task Lifecycle .
desiredStatus (string) --
The desired status of the task. For more information, see Task Lifecycle .
cpu (string) --
The number of CPU units used by the task as expressed in a task definition. It can be expressed as an integer using CPU units, for example 1024 . It can also be expressed as a string using vCPUs, for example 1 vCPU or 1 vcpu . String values are converted to an integer indicating the CPU units when the task definition is registered.
If you are using the EC2 launch type, this field is optional. Supported values are between 128 CPU units (0.125 vCPUs) and 10240 CPU units (10 vCPUs).
If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the memory parameter:
256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)
512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)
1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
2048 (2 vCPU) - Available memory values: Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)
4096 (4 vCPU) - Available memory values: Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)
memory (string) --
The amount of memory (in MiB) used by the task as expressed in a task definition. It can be expressed as an integer using MiB, for example 1024 . It can also be expressed as a string using GB, for example 1GB or 1 GB . String values are converted to an integer indicating the MiB when the task definition is registered.
If you are using the EC2 launch type, this field is optional.
If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the cpu parameter:
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)
containers (list) --
The containers associated with the task.
(dict) --
A Docker container that is part of a task.
containerArn (string) --
The Amazon Resource Name (ARN) of the container.
taskArn (string) --
The ARN of the task.
name (string) --
The name of the container.
runtimeId (string) --
The ID of the Docker container.
lastStatus (string) --
The last known status of the container.
exitCode (integer) --
The exit code returned from the container.
reason (string) --
A short (255 max characters) human-readable string to provide additional details about a running or stopped container.
networkBindings (list) --
The network bindings associated with the container.
(dict) --
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
bindIP (string) --
The IP address that the container is bound to on the container instance.
containerPort (integer) --
The port number on the container that is used with the network binding.
hostPort (integer) --
The port number on the host that is used with the network binding.
protocol (string) --
The protocol used for the network binding.
networkInterfaces (list) --
The network interfaces associated with the container.
(dict) --
An object representing the elastic network interface for tasks that use the awsvpc network mode.
attachmentId (string) --
The attachment ID for the network interface.
privateIpv4Address (string) --
The private IPv4 address for the network interface.
ipv6Address (string) --
The private IPv6 address for the network interface.
healthStatus (string) --
The health status of the container. If health checks are not configured for this container in its task definition, then it reports the health status as UNKNOWN .
cpu (string) --
The number of CPU units set for the container. The value will be 0 if no value was specified in the container definition when the task definition was registered.
memory (string) --
The hard limit (in MiB) of memory set for the container.
memoryReservation (string) --
The soft limit (in MiB) of memory set for the container.
gpuIds (list) --
The IDs of each GPU assigned to the container.
(string) --
firelensConfiguration (dict) --
The FireLens configuration for the container.
type (string) --
The log router to use. The valid values are fluentd or fluentbit .
options (dict) --
The options to use when configuring the log router. This field is optional and can be used to add additional metadata, such as the task, task definition, cluster, and container instance details to the log event. If specified, the syntax to use is "options":{"enable-ecs-log-metadata":"true|false"} .
(string) --
(string) --
startedBy (string) --
The tag specified when a task is started. If the task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
version (integer) --
The version counter for the task. Every time a task experiences a change that triggers a CloudWatch event, the version counter is incremented. If you are replicating your Amazon ECS task state with CloudWatch Events, you can compare the version of a task reported by the Amazon ECS API actionss with the version reported in CloudWatch Events for the task (inside the detail object) to verify that the version in your event stream is current.
stoppedReason (string) --
The reason that the task was stopped.
stopCode (string) --
The stop code indicating why a task was stopped. The stoppedReason may contain additional details.
connectivity (string) --
The connectivity status of a task.
connectivityAt (datetime) --
The Unix timestamp for when the task last went into CONNECTED status.
pullStartedAt (datetime) --
The Unix timestamp for when the container image pull began.
pullStoppedAt (datetime) --
The Unix timestamp for when the container image pull completed.
executionStoppedAt (datetime) --
The Unix timestamp for when the task execution stopped.
createdAt (datetime) --
The Unix timestamp for when the task was created (the task entered the PENDING state).
startedAt (datetime) --
The Unix timestamp for when the task started (the task transitioned from the PENDING state to the RUNNING state).
stoppingAt (datetime) --
The Unix timestamp for when the task stops (transitions from the RUNNING state to STOPPED ).
stoppedAt (datetime) --
The Unix timestamp for when the task was stopped (the task transitioned from the RUNNING state to the STOPPED state).
group (string) --
The name of the task group associated with the task.
launchType (string) --
The launch type on which your task is running. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
platformVersion (string) --
The platform version on which your task is running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
attachments (list) --
The Elastic Network Adapter associated with the task if the task uses the awsvpc network mode.
(dict) --
An object representing a container instance or task attachment.
id (string) --
The unique identifier for the attachment.
type (string) --
The type of the attachment, such as ElasticNetworkInterface .
status (string) --
The status of the attachment. Valid values are PRECREATED , CREATED , ATTACHING , ATTACHED , DETACHING , DETACHED , and DELETED .
details (list) --
Details of the attachment. For elastic network interfaces, this includes the network interface ID, the MAC address, the subnet ID, and the private IPv4 address.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
healthStatus (string) --
The health status for the task, which is determined by the health of the essential containers in the task. If all essential containers in the task are reporting as HEALTHY , then the task status also reports as HEALTHY . If any essential containers in the task are reporting as UNHEALTHY or UNKNOWN , then the task status also reports as UNHEALTHY or UNKNOWN , accordingly.
Note
The Amazon ECS container agent does not monitor or report on Docker health checks that are embedded in a container image (such as those specified in a parent image or from the image's Dockerfile) and not specified in the container definition. Health check parameters that are specified in a container definition override any Docker health checks that exist in the container image.
tags (list) --
The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
failures (list) --
Any failures associated with the call.
(dict) --
A failed resource.
arn (string) --
The Amazon Resource Name (ARN) of the failed resource.
reason (string) --
The reason for the failure.
{'tasks': {'containers': {'firelensConfiguration': {'options': {'string': 'string'},
'type': 'fluentd | '
'fluentbit'}}}}
Starts a new task from the specified task definition on the specified container instance or instances.
Alternatively, you can use RunTask to place tasks for you. For more information, see Scheduling Tasks in the Amazon Elastic Container Service Developer Guide .
See also: AWS API Documentation
Request Syntax
client.start_task(
cluster='string',
taskDefinition='string',
overrides={
'containerOverrides': [
{
'name': 'string',
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
]
},
],
'taskRoleArn': 'string',
'executionRoleArn': 'string'
},
containerInstances=[
'string',
],
startedBy='string',
group='string',
networkConfiguration={
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
tags=[
{
'key': 'string',
'value': 'string'
},
],
enableECSManagedTags=True|False,
propagateTags='TASK_DEFINITION'|'SERVICE'
)
string
The short name or full Amazon Resource Name (ARN) of the cluster on which to start your task. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The family and revision (family:revision ) or full ARN of the task definition to start. If a revision is not specified, the latest ACTIVE revision is used.
dict
A list of container overrides in JSON format that specify the name of a container in the specified task definition and the overrides it should receive. You can override the default command for a container (that is specified in the task definition or Docker image) with a command override. You can also override existing environment variables (that are specified in the task definition or Docker image) on a container or add new environment variables to it with an environment override.
Note
A total of 8192 characters are allowed for overrides. This limit includes the JSON formatting characters of the override structure.
containerOverrides (list) --
One or more container overrides sent to a task.
(dict) --
The overrides that should be sent to a container. An empty container override can be passed in. An example of an empty container override would be {"containerOverrides": [ ] } . If a non-empty container override is specified, the name parameter must be included.
name (string) --
The name of the container that receives the override. This parameter is required if any override is specified.
command (list) --
The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
(string) --
environment (list) --
The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
cpu (integer) --
The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.
memory (integer) --
The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.
resourceRequirements (list) --
The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) -- [REQUIRED]
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) -- [REQUIRED]
The type of resource to assign to a container. The only supported value is GPU .
taskRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role.
executionRoleArn (string) --
The Amazon Resource Name (ARN) of the task execution role that the Amazon ECS container agent and the Docker daemon can assume.
list
[REQUIRED]
The container instance IDs or full ARN entries for the container instances on which you would like to place your task. You can specify up to 10 container instances.
(string) --
string
An optional tag specified when a task is started. For example, if you automatically trigger a task to run a batch process job, you could apply a unique identifier for that job to your task with the startedBy parameter. You can then identify which tasks belong to that job by filtering the results of a ListTasks call with the startedBy value. Up to 36 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed.
If a task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
string
The name of the task group to associate with the task. The default value is the family name of the task definition (for example, family:my-family-name).
dict
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) -- [REQUIRED]
The subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
list
The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
boolean
Specifies whether to enable Amazon ECS managed tags for the task. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide .
string
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags are not propagated.
dict
Response Syntax
{
'tasks': [
{
'taskArn': 'string',
'clusterArn': 'string',
'taskDefinitionArn': 'string',
'containerInstanceArn': 'string',
'overrides': {
'containerOverrides': [
{
'name': 'string',
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
]
},
],
'taskRoleArn': 'string',
'executionRoleArn': 'string'
},
'lastStatus': 'string',
'desiredStatus': 'string',
'cpu': 'string',
'memory': 'string',
'containers': [
{
'containerArn': 'string',
'taskArn': 'string',
'name': 'string',
'runtimeId': 'string',
'lastStatus': 'string',
'exitCode': 123,
'reason': 'string',
'networkBindings': [
{
'bindIP': 'string',
'containerPort': 123,
'hostPort': 123,
'protocol': 'tcp'|'udp'
},
],
'networkInterfaces': [
{
'attachmentId': 'string',
'privateIpv4Address': 'string',
'ipv6Address': 'string'
},
],
'healthStatus': 'HEALTHY'|'UNHEALTHY'|'UNKNOWN',
'cpu': 'string',
'memory': 'string',
'memoryReservation': 'string',
'gpuIds': [
'string',
],
'firelensConfiguration': {
'type': 'fluentd'|'fluentbit',
'options': {
'string': 'string'
}
}
},
],
'startedBy': 'string',
'version': 123,
'stoppedReason': 'string',
'stopCode': 'TaskFailedToStart'|'EssentialContainerExited'|'UserInitiated',
'connectivity': 'CONNECTED'|'DISCONNECTED',
'connectivityAt': datetime(2015, 1, 1),
'pullStartedAt': datetime(2015, 1, 1),
'pullStoppedAt': datetime(2015, 1, 1),
'executionStoppedAt': datetime(2015, 1, 1),
'createdAt': datetime(2015, 1, 1),
'startedAt': datetime(2015, 1, 1),
'stoppingAt': datetime(2015, 1, 1),
'stoppedAt': datetime(2015, 1, 1),
'group': 'string',
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'attachments': [
{
'id': 'string',
'type': 'string',
'status': 'string',
'details': [
{
'name': 'string',
'value': 'string'
},
]
},
],
'healthStatus': 'HEALTHY'|'UNHEALTHY'|'UNKNOWN',
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
],
'failures': [
{
'arn': 'string',
'reason': 'string'
},
]
}
Response Structure
(dict) --
tasks (list) --
A full description of the tasks that were started. Each task that was successfully placed on your container instances is described.
(dict) --
Details on a task in a cluster.
taskArn (string) --
The Amazon Resource Name (ARN) of the task.
clusterArn (string) --
The ARN of the cluster that hosts the task.
taskDefinitionArn (string) --
The ARN of the task definition that creates the task.
containerInstanceArn (string) --
The ARN of the container instances that host the task.
overrides (dict) --
One or more container overrides.
containerOverrides (list) --
One or more container overrides sent to a task.
(dict) --
The overrides that should be sent to a container. An empty container override can be passed in. An example of an empty container override would be {"containerOverrides": [ ] } . If a non-empty container override is specified, the name parameter must be included.
name (string) --
The name of the container that receives the override. This parameter is required if any override is specified.
command (list) --
The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
(string) --
environment (list) --
The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
cpu (integer) --
The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.
memory (integer) --
The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.
resourceRequirements (list) --
The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) --
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) --
The type of resource to assign to a container. The only supported value is GPU .
taskRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role.
executionRoleArn (string) --
The Amazon Resource Name (ARN) of the task execution role that the Amazon ECS container agent and the Docker daemon can assume.
lastStatus (string) --
The last known status of the task. For more information, see Task Lifecycle .
desiredStatus (string) --
The desired status of the task. For more information, see Task Lifecycle .
cpu (string) --
The number of CPU units used by the task as expressed in a task definition. It can be expressed as an integer using CPU units, for example 1024 . It can also be expressed as a string using vCPUs, for example 1 vCPU or 1 vcpu . String values are converted to an integer indicating the CPU units when the task definition is registered.
If you are using the EC2 launch type, this field is optional. Supported values are between 128 CPU units (0.125 vCPUs) and 10240 CPU units (10 vCPUs).
If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the memory parameter:
256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)
512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)
1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
2048 (2 vCPU) - Available memory values: Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)
4096 (4 vCPU) - Available memory values: Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)
memory (string) --
The amount of memory (in MiB) used by the task as expressed in a task definition. It can be expressed as an integer using MiB, for example 1024 . It can also be expressed as a string using GB, for example 1GB or 1 GB . String values are converted to an integer indicating the MiB when the task definition is registered.
If you are using the EC2 launch type, this field is optional.
If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the cpu parameter:
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)
containers (list) --
The containers associated with the task.
(dict) --
A Docker container that is part of a task.
containerArn (string) --
The Amazon Resource Name (ARN) of the container.
taskArn (string) --
The ARN of the task.
name (string) --
The name of the container.
runtimeId (string) --
The ID of the Docker container.
lastStatus (string) --
The last known status of the container.
exitCode (integer) --
The exit code returned from the container.
reason (string) --
A short (255 max characters) human-readable string to provide additional details about a running or stopped container.
networkBindings (list) --
The network bindings associated with the container.
(dict) --
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
bindIP (string) --
The IP address that the container is bound to on the container instance.
containerPort (integer) --
The port number on the container that is used with the network binding.
hostPort (integer) --
The port number on the host that is used with the network binding.
protocol (string) --
The protocol used for the network binding.
networkInterfaces (list) --
The network interfaces associated with the container.
(dict) --
An object representing the elastic network interface for tasks that use the awsvpc network mode.
attachmentId (string) --
The attachment ID for the network interface.
privateIpv4Address (string) --
The private IPv4 address for the network interface.
ipv6Address (string) --
The private IPv6 address for the network interface.
healthStatus (string) --
The health status of the container. If health checks are not configured for this container in its task definition, then it reports the health status as UNKNOWN .
cpu (string) --
The number of CPU units set for the container. The value will be 0 if no value was specified in the container definition when the task definition was registered.
memory (string) --
The hard limit (in MiB) of memory set for the container.
memoryReservation (string) --
The soft limit (in MiB) of memory set for the container.
gpuIds (list) --
The IDs of each GPU assigned to the container.
(string) --
firelensConfiguration (dict) --
The FireLens configuration for the container.
type (string) --
The log router to use. The valid values are fluentd or fluentbit .
options (dict) --
The options to use when configuring the log router. This field is optional and can be used to add additional metadata, such as the task, task definition, cluster, and container instance details to the log event. If specified, the syntax to use is "options":{"enable-ecs-log-metadata":"true|false"} .
(string) --
(string) --
startedBy (string) --
The tag specified when a task is started. If the task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
version (integer) --
The version counter for the task. Every time a task experiences a change that triggers a CloudWatch event, the version counter is incremented. If you are replicating your Amazon ECS task state with CloudWatch Events, you can compare the version of a task reported by the Amazon ECS API actionss with the version reported in CloudWatch Events for the task (inside the detail object) to verify that the version in your event stream is current.
stoppedReason (string) --
The reason that the task was stopped.
stopCode (string) --
The stop code indicating why a task was stopped. The stoppedReason may contain additional details.
connectivity (string) --
The connectivity status of a task.
connectivityAt (datetime) --
The Unix timestamp for when the task last went into CONNECTED status.
pullStartedAt (datetime) --
The Unix timestamp for when the container image pull began.
pullStoppedAt (datetime) --
The Unix timestamp for when the container image pull completed.
executionStoppedAt (datetime) --
The Unix timestamp for when the task execution stopped.
createdAt (datetime) --
The Unix timestamp for when the task was created (the task entered the PENDING state).
startedAt (datetime) --
The Unix timestamp for when the task started (the task transitioned from the PENDING state to the RUNNING state).
stoppingAt (datetime) --
The Unix timestamp for when the task stops (transitions from the RUNNING state to STOPPED ).
stoppedAt (datetime) --
The Unix timestamp for when the task was stopped (the task transitioned from the RUNNING state to the STOPPED state).
group (string) --
The name of the task group associated with the task.
launchType (string) --
The launch type on which your task is running. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
platformVersion (string) --
The platform version on which your task is running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
attachments (list) --
The Elastic Network Adapter associated with the task if the task uses the awsvpc network mode.
(dict) --
An object representing a container instance or task attachment.
id (string) --
The unique identifier for the attachment.
type (string) --
The type of the attachment, such as ElasticNetworkInterface .
status (string) --
The status of the attachment. Valid values are PRECREATED , CREATED , ATTACHING , ATTACHED , DETACHING , DETACHED , and DELETED .
details (list) --
Details of the attachment. For elastic network interfaces, this includes the network interface ID, the MAC address, the subnet ID, and the private IPv4 address.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
healthStatus (string) --
The health status for the task, which is determined by the health of the essential containers in the task. If all essential containers in the task are reporting as HEALTHY , then the task status also reports as HEALTHY . If any essential containers in the task are reporting as UNHEALTHY or UNKNOWN , then the task status also reports as UNHEALTHY or UNKNOWN , accordingly.
Note
The Amazon ECS container agent does not monitor or report on Docker health checks that are embedded in a container image (such as those specified in a parent image or from the image's Dockerfile) and not specified in the container definition. Health check parameters that are specified in a container definition override any Docker health checks that exist in the container image.
tags (list) --
The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
failures (list) --
Any failures associated with the call.
(dict) --
A failed resource.
arn (string) --
The Amazon Resource Name (ARN) of the failed resource.
reason (string) --
The reason for the failure.
{'task': {'containers': {'firelensConfiguration': {'options': {'string': 'string'},
'type': 'fluentd | '
'fluentbit'}}}}
Stops a running task. Any tags associated with the task will be deleted.
When StopTask is called on a task, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM value and a default 30-second timeout, after which the SIGKILL value is sent and the containers are forcibly stopped. If the container handles the SIGTERM value gracefully and exits within 30 seconds from receiving it, no SIGKILL value is sent.
Note
The default 30-second timeout can be configured on the Amazon ECS container agent with the ECS_CONTAINER_STOP_TIMEOUT variable. For more information, see Amazon ECS Container Agent Configuration in the Amazon Elastic Container Service Developer Guide .
See also: AWS API Documentation
Request Syntax
client.stop_task(
cluster='string',
task='string',
reason='string'
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the task to stop. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The task ID or full Amazon Resource Name (ARN) of the task to stop.
string
An optional message specified when a task is stopped. For example, if you are using a custom scheduler, you can use this parameter to specify the reason for stopping the task here, and the message appears in subsequent DescribeTasks API operations on this task. Up to 255 characters are allowed in this message.
dict
Response Syntax
{
'task': {
'taskArn': 'string',
'clusterArn': 'string',
'taskDefinitionArn': 'string',
'containerInstanceArn': 'string',
'overrides': {
'containerOverrides': [
{
'name': 'string',
'command': [
'string',
],
'environment': [
{
'name': 'string',
'value': 'string'
},
],
'cpu': 123,
'memory': 123,
'memoryReservation': 123,
'resourceRequirements': [
{
'value': 'string',
'type': 'GPU'
},
]
},
],
'taskRoleArn': 'string',
'executionRoleArn': 'string'
},
'lastStatus': 'string',
'desiredStatus': 'string',
'cpu': 'string',
'memory': 'string',
'containers': [
{
'containerArn': 'string',
'taskArn': 'string',
'name': 'string',
'runtimeId': 'string',
'lastStatus': 'string',
'exitCode': 123,
'reason': 'string',
'networkBindings': [
{
'bindIP': 'string',
'containerPort': 123,
'hostPort': 123,
'protocol': 'tcp'|'udp'
},
],
'networkInterfaces': [
{
'attachmentId': 'string',
'privateIpv4Address': 'string',
'ipv6Address': 'string'
},
],
'healthStatus': 'HEALTHY'|'UNHEALTHY'|'UNKNOWN',
'cpu': 'string',
'memory': 'string',
'memoryReservation': 'string',
'gpuIds': [
'string',
],
'firelensConfiguration': {
'type': 'fluentd'|'fluentbit',
'options': {
'string': 'string'
}
}
},
],
'startedBy': 'string',
'version': 123,
'stoppedReason': 'string',
'stopCode': 'TaskFailedToStart'|'EssentialContainerExited'|'UserInitiated',
'connectivity': 'CONNECTED'|'DISCONNECTED',
'connectivityAt': datetime(2015, 1, 1),
'pullStartedAt': datetime(2015, 1, 1),
'pullStoppedAt': datetime(2015, 1, 1),
'executionStoppedAt': datetime(2015, 1, 1),
'createdAt': datetime(2015, 1, 1),
'startedAt': datetime(2015, 1, 1),
'stoppingAt': datetime(2015, 1, 1),
'stoppedAt': datetime(2015, 1, 1),
'group': 'string',
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'attachments': [
{
'id': 'string',
'type': 'string',
'status': 'string',
'details': [
{
'name': 'string',
'value': 'string'
},
]
},
],
'healthStatus': 'HEALTHY'|'UNHEALTHY'|'UNKNOWN',
'tags': [
{
'key': 'string',
'value': 'string'
},
]
}
}
Response Structure
(dict) --
task (dict) --
The task that was stopped.
taskArn (string) --
The Amazon Resource Name (ARN) of the task.
clusterArn (string) --
The ARN of the cluster that hosts the task.
taskDefinitionArn (string) --
The ARN of the task definition that creates the task.
containerInstanceArn (string) --
The ARN of the container instances that host the task.
overrides (dict) --
One or more container overrides.
containerOverrides (list) --
One or more container overrides sent to a task.
(dict) --
The overrides that should be sent to a container. An empty container override can be passed in. An example of an empty container override would be {"containerOverrides": [ ] } . If a non-empty container override is specified, the name parameter must be included.
name (string) --
The name of the container that receives the override. This parameter is required if any override is specified.
command (list) --
The command to send to the container that overrides the default command from the Docker image or the task definition. You must also specify a container name.
(string) --
environment (list) --
The environment variables to send to the container. You can add new environment variables, which are added to the container at launch, or you can override the existing environment variables from the Docker image or the task definition. You must also specify a container name.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
cpu (integer) --
The number of cpu units reserved for the container, instead of the default value from the task definition. You must also specify a container name.
memory (integer) --
The hard limit (in MiB) of memory to present to the container, instead of the default value from the task definition. If your container attempts to exceed the memory specified here, the container is killed. You must also specify a container name.
memoryReservation (integer) --
The soft limit (in MiB) of memory to reserve for the container, instead of the default value from the task definition. You must also specify a container name.
resourceRequirements (list) --
The type and amount of a resource to assign to a container, instead of the default value from the task definition. The only supported resource is a GPU.
(dict) --
The type and amount of a resource to assign to a container. The only supported resource is a GPU. For more information, see Working with GPUs on Amazon ECS in the Amazon Elastic Container Service Developer Guide
value (string) --
The number of physical GPUs the Amazon ECS container agent will reserve for the container. The number of GPUs reserved for all containers in a task should not exceed the number of available GPUs on the container instance the task is launched on.
type (string) --
The type of resource to assign to a container. The only supported value is GPU .
taskRoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that containers in this task can assume. All containers in this task are granted the permissions that are specified in this role.
executionRoleArn (string) --
The Amazon Resource Name (ARN) of the task execution role that the Amazon ECS container agent and the Docker daemon can assume.
lastStatus (string) --
The last known status of the task. For more information, see Task Lifecycle .
desiredStatus (string) --
The desired status of the task. For more information, see Task Lifecycle .
cpu (string) --
The number of CPU units used by the task as expressed in a task definition. It can be expressed as an integer using CPU units, for example 1024 . It can also be expressed as a string using vCPUs, for example 1 vCPU or 1 vcpu . String values are converted to an integer indicating the CPU units when the task definition is registered.
If you are using the EC2 launch type, this field is optional. Supported values are between 128 CPU units (0.125 vCPUs) and 10240 CPU units (10 vCPUs).
If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the memory parameter:
256 (.25 vCPU) - Available memory values: 512 (0.5 GB), 1024 (1 GB), 2048 (2 GB)
512 (.5 vCPU) - Available memory values: 1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB)
1024 (1 vCPU) - Available memory values: 2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB)
2048 (2 vCPU) - Available memory values: Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB)
4096 (4 vCPU) - Available memory values: Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB)
memory (string) --
The amount of memory (in MiB) used by the task as expressed in a task definition. It can be expressed as an integer using MiB, for example 1024 . It can also be expressed as a string using GB, for example 1GB or 1 GB . String values are converted to an integer indicating the MiB when the task definition is registered.
If you are using the EC2 launch type, this field is optional.
If you are using the Fargate launch type, this field is required and you must use one of the following values, which determines your range of supported values for the cpu parameter:
512 (0.5 GB), 1024 (1 GB), 2048 (2 GB) - Available cpu values: 256 (.25 vCPU)
1024 (1 GB), 2048 (2 GB), 3072 (3 GB), 4096 (4 GB) - Available cpu values: 512 (.5 vCPU)
2048 (2 GB), 3072 (3 GB), 4096 (4 GB), 5120 (5 GB), 6144 (6 GB), 7168 (7 GB), 8192 (8 GB) - Available cpu values: 1024 (1 vCPU)
Between 4096 (4 GB) and 16384 (16 GB) in increments of 1024 (1 GB) - Available cpu values: 2048 (2 vCPU)
Between 8192 (8 GB) and 30720 (30 GB) in increments of 1024 (1 GB) - Available cpu values: 4096 (4 vCPU)
containers (list) --
The containers associated with the task.
(dict) --
A Docker container that is part of a task.
containerArn (string) --
The Amazon Resource Name (ARN) of the container.
taskArn (string) --
The ARN of the task.
name (string) --
The name of the container.
runtimeId (string) --
The ID of the Docker container.
lastStatus (string) --
The last known status of the container.
exitCode (integer) --
The exit code returned from the container.
reason (string) --
A short (255 max characters) human-readable string to provide additional details about a running or stopped container.
networkBindings (list) --
The network bindings associated with the container.
(dict) --
Details on the network bindings between a container and its host container instance. After a task reaches the RUNNING status, manual and automatic host and container port assignments are visible in the networkBindings section of DescribeTasks API responses.
bindIP (string) --
The IP address that the container is bound to on the container instance.
containerPort (integer) --
The port number on the container that is used with the network binding.
hostPort (integer) --
The port number on the host that is used with the network binding.
protocol (string) --
The protocol used for the network binding.
networkInterfaces (list) --
The network interfaces associated with the container.
(dict) --
An object representing the elastic network interface for tasks that use the awsvpc network mode.
attachmentId (string) --
The attachment ID for the network interface.
privateIpv4Address (string) --
The private IPv4 address for the network interface.
ipv6Address (string) --
The private IPv6 address for the network interface.
healthStatus (string) --
The health status of the container. If health checks are not configured for this container in its task definition, then it reports the health status as UNKNOWN .
cpu (string) --
The number of CPU units set for the container. The value will be 0 if no value was specified in the container definition when the task definition was registered.
memory (string) --
The hard limit (in MiB) of memory set for the container.
memoryReservation (string) --
The soft limit (in MiB) of memory set for the container.
gpuIds (list) --
The IDs of each GPU assigned to the container.
(string) --
firelensConfiguration (dict) --
The FireLens configuration for the container.
type (string) --
The log router to use. The valid values are fluentd or fluentbit .
options (dict) --
The options to use when configuring the log router. This field is optional and can be used to add additional metadata, such as the task, task definition, cluster, and container instance details to the log event. If specified, the syntax to use is "options":{"enable-ecs-log-metadata":"true|false"} .
(string) --
(string) --
startedBy (string) --
The tag specified when a task is started. If the task is started by an Amazon ECS service, then the startedBy parameter contains the deployment ID of the service that starts it.
version (integer) --
The version counter for the task. Every time a task experiences a change that triggers a CloudWatch event, the version counter is incremented. If you are replicating your Amazon ECS task state with CloudWatch Events, you can compare the version of a task reported by the Amazon ECS API actionss with the version reported in CloudWatch Events for the task (inside the detail object) to verify that the version in your event stream is current.
stoppedReason (string) --
The reason that the task was stopped.
stopCode (string) --
The stop code indicating why a task was stopped. The stoppedReason may contain additional details.
connectivity (string) --
The connectivity status of a task.
connectivityAt (datetime) --
The Unix timestamp for when the task last went into CONNECTED status.
pullStartedAt (datetime) --
The Unix timestamp for when the container image pull began.
pullStoppedAt (datetime) --
The Unix timestamp for when the container image pull completed.
executionStoppedAt (datetime) --
The Unix timestamp for when the task execution stopped.
createdAt (datetime) --
The Unix timestamp for when the task was created (the task entered the PENDING state).
startedAt (datetime) --
The Unix timestamp for when the task started (the task transitioned from the PENDING state to the RUNNING state).
stoppingAt (datetime) --
The Unix timestamp for when the task stops (transitions from the RUNNING state to STOPPED ).
stoppedAt (datetime) --
The Unix timestamp for when the task was stopped (the task transitioned from the RUNNING state to the STOPPED state).
group (string) --
The name of the task group associated with the task.
launchType (string) --
The launch type on which your task is running. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
platformVersion (string) --
The platform version on which your task is running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
attachments (list) --
The Elastic Network Adapter associated with the task if the task uses the awsvpc network mode.
(dict) --
An object representing a container instance or task attachment.
id (string) --
The unique identifier for the attachment.
type (string) --
The type of the attachment, such as ElasticNetworkInterface .
status (string) --
The status of the attachment. Valid values are PRECREATED , CREATED , ATTACHING , ATTACHED , DETACHING , DETACHED , and DELETED .
details (list) --
Details of the attachment. For elastic network interfaces, this includes the network interface ID, the MAC address, the subnet ID, and the private IPv4 address.
(dict) --
A key-value pair object.
name (string) --
The name of the key-value pair. For environment variables, this is the name of the environment variable.
value (string) --
The value of the key-value pair. For environment variables, this is the value of the environment variable.
healthStatus (string) --
The health status for the task, which is determined by the health of the essential containers in the task. If all essential containers in the task are reporting as HEALTHY , then the task status also reports as HEALTHY . If any essential containers in the task are reporting as UNHEALTHY or UNKNOWN , then the task status also reports as UNHEALTHY or UNKNOWN , accordingly.
Note
The Amazon ECS container agent does not monitor or report on Docker health checks that are embedded in a container image (such as those specified in a parent image or from the image's Dockerfile) and not specified in the container definition. Health check parameters that are specified in a container definition override any Docker health checks that exist in the container image.
tags (list) --
The metadata that you apply to the task to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).