AWS API Changes

2020/11/09 - Amazon FSx - 3 new 6 updated api methods

Changes This release adds support for creating DNS aliases for Amazon FSx for Windows File Server, and using AWS Backup to automate scheduled, policy-driven backup plans for Amazon FSx file systems.

AssociateFileSystemAliases (new)

Link ¶

Use this action to associate one or more Domain Name Server (DNS) aliases with an existing Amazon FSx for Windows File Server file system. A file systen can have a maximum of 50 DNS aliases associated with it at any one time. If you try to associate a DNS alias that is already associated with the file system, FSx takes no action on that alias in the request. For more information, see Working with DNS Aliases and Walkthrough 5: Using DNS aliases to access your file system , including additional steps you must take to be able to access your file system using a DNS alias.

The system response shows the DNS aliases that Amazon FSx is attempting to associate with the file system. Use the API operation to monitor the status of the aliases Amazon FSx is associating with the file system.

See also: AWS API Documentation

Request Syntax

client.associate_file_system_aliases(
    ClientRequestToken='string',
    FileSystemId='string',
    Aliases=[
        'string',
    ]
)

type ClientRequestToken

string

param ClientRequestToken

(Optional) An idempotency token for resource creation, in a string of up to 64 ASCII characters. This token is automatically filled on your behalf when you use the AWS Command Line Interface (AWS CLI) or an AWS SDK.

This field is autopopulated if not provided.

type FileSystemId

string

param FileSystemId

[REQUIRED]

Specifies the file system with which you want to associate one or more DNS aliases.

type Aliases

list

param Aliases

[REQUIRED]

An array of one or more DNS alias names to associate with the file system. The alias name has to comply with the following formatting requirements:

Formatted as a fully-qualified domain name (FQDN), * hostname.domain * , for example, accounting.corp.example.com .
Can contain alphanumeric characters and the hyphen (-).
Cannot start or end with a hyphen.
Can start with a numeric.

For DNS alias names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.

(string) --

rtype

dict

returns

Response Syntax

{
    'Aliases': [
        {
            'Name': 'string',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETING'|'CREATE_FAILED'|'DELETE_FAILED'
        },
    ]
}

Response Structure

(dict) --

The system generated response showing the DNS aliases that Amazon FSx is attempting to associate with the file system. Use the API operation to monitor the status of the aliases Amazon FSx is associating with the file system. It can take up to 2.5 minutes for the alias status to change from CREATING to AVAILABLE .
- Aliases (list) --
  
  An array of the DNS aliases that Amazon FSx is associating with the file system.
  - (dict) --
    
    A DNS alias that is associated with the file system. You can use a DNS alias to access a file system using user-defined DNS names, in addition to the default DNS name that Amazon FSx assigns to the file system. For more information, see DNS aliases in the FSx for Windows File Server User Guide .
    - Name (string) --
      
      The name of the DNS alias. The alias name has to meet the following requirements:
      - Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
      - Can contain alphanumeric characters and the hyphen (-).
      - Cannot start or end with a hyphen.
      - Can start with a numeric.
      For DNS names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
    - Lifecycle (string) --
      
      Describes the state of the DNS alias.
      - AVAILABLE - The DNS alias is associated with an Amazon FSx file system.
      - CREATING - Amazon FSx is creating the DNS alias and associating it with the file system.
      - CREATE_FAILED - Amazon FSx was unable to associate the DNS alias with the file system.
      - DELETING - Amazon FSx is disassociating the DNS alias from the file system and deleting it.
      - DELETE_FAILED - Amazon FSx was unable to disassocate the DNS alias from the file system.

DescribeFileSystemAliases (new)

Link ¶

Returns the DNS aliases that are associated with the specified Amazon FSx for Windows File Server file system. A history of all DNS aliases that have been associated with and disassociated from the file system is available in the list of AdministrativeAction provided in the DescribeFileSystems operation response.

See also: AWS API Documentation

Request Syntax

client.describe_file_system_aliases(
    ClientRequestToken='string',
    FileSystemId='string',
    MaxResults=123,
    NextToken='string'
)

type ClientRequestToken

string

param ClientRequestToken

This field is autopopulated if not provided.

type FileSystemId

string

param FileSystemId

[REQUIRED]

The ID of the file system to return the associated DNS aliases for (String).

type MaxResults

integer

param MaxResults

Maximum number of DNS aliases to return in the response (integer). This parameter value must be greater than 0. The number of items that Amazon FSx returns is the minimum of the MaxResults parameter specified in the request and the service's internal maximum number of items per page.

type NextToken

string

param NextToken

Opaque pagination token returned from a previous DescribeFileSystemAliases operation (String). If a token is included in the request, the action continues the list from where the previous returning call left off.

rtype

dict

returns

Response Syntax

{
    'Aliases': [
        {
            'Name': 'string',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETING'|'CREATE_FAILED'|'DELETE_FAILED'
        },
    ],
    'NextToken': 'string'
}

Response Structure

(dict) --

The response object for DescribeFileSystemAliases operation.
- Aliases (list) --
  
  An array of one or more DNS aliases currently associated with the specified file system.
  - (dict) --
    
    A DNS alias that is associated with the file system. You can use a DNS alias to access a file system using user-defined DNS names, in addition to the default DNS name that Amazon FSx assigns to the file system. For more information, see DNS aliases in the FSx for Windows File Server User Guide .
    - Name (string) --
      
      The name of the DNS alias. The alias name has to meet the following requirements:
      - Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
      - Can contain alphanumeric characters and the hyphen (-).
      - Cannot start or end with a hyphen.
      - Can start with a numeric.
      For DNS names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
    - Lifecycle (string) --
      
      Describes the state of the DNS alias.
      - AVAILABLE - The DNS alias is associated with an Amazon FSx file system.
      - CREATING - Amazon FSx is creating the DNS alias and associating it with the file system.
      - CREATE_FAILED - Amazon FSx was unable to associate the DNS alias with the file system.
      - DELETING - Amazon FSx is disassociating the DNS alias from the file system and deleting it.
      - DELETE_FAILED - Amazon FSx was unable to disassocate the DNS alias from the file system.
- NextToken (string) --
  
  Present if there are more DNS aliases than returned in the response (String). You can use the NextToken value in a later request to fetch additional descriptions.

DisassociateFileSystemAliases (new)

Link ¶

Use this action to disassociate, or remove, one or more Domain Name Service (DNS) aliases from an Amazon FSx for Windows File Server file system. If you attempt to disassociate a DNS alias that is not associated with the file system, Amazon FSx responds with a 400 Bad Request. For more information, see Working with DNS Aliases .

The system generated response showing the DNS aliases that Amazon FSx is attempting to disassociate from the file system. Use the API operation to monitor the status of the aliases Amazon FSx is disassociating with the file system.

See also: AWS API Documentation

Request Syntax

client.disassociate_file_system_aliases(
    ClientRequestToken='string',
    FileSystemId='string',
    Aliases=[
        'string',
    ]
)

type ClientRequestToken

string

param ClientRequestToken

This field is autopopulated if not provided.

type FileSystemId

string

param FileSystemId

[REQUIRED]

Specifies the file system from which to disassociate the DNS aliases.

type Aliases

list

param Aliases

[REQUIRED]

An array of one or more DNS alias names to disassociate, or remove, from the file system.

(string) --

rtype

dict

returns

Response Syntax

{
    'Aliases': [
        {
            'Name': 'string',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETING'|'CREATE_FAILED'|'DELETE_FAILED'
        },
    ]
}

Response Structure

(dict) --

The system generated response showing the DNS aliases that Amazon FSx is attempting to disassociate from the file system. Use the API operation to monitor the status of the aliases Amazon FSx is removing from the file system.
- Aliases (list) --
  
  An array of one or more DNS aliases that Amazon FSx is attempting to disassociate from the file system.
  - (dict) --
    
    A DNS alias that is associated with the file system. You can use a DNS alias to access a file system using user-defined DNS names, in addition to the default DNS name that Amazon FSx assigns to the file system. For more information, see DNS aliases in the FSx for Windows File Server User Guide .
    - Name (string) --
      
      The name of the DNS alias. The alias name has to meet the following requirements:
      - Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
      - Can contain alphanumeric characters and the hyphen (-).
      - Cannot start or end with a hyphen.
      - Can start with a numeric.
      For DNS names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
    - Lifecycle (string) --
      
      Describes the state of the DNS alias.
      - AVAILABLE - The DNS alias is associated with an Amazon FSx file system.
      - CREATING - Amazon FSx is creating the DNS alias and associating it with the file system.
      - CREATE_FAILED - Amazon FSx was unable to associate the DNS alias with the file system.
      - DELETING - Amazon FSx is disassociating the DNS alias from the file system and deleting it.
      - DELETE_FAILED - Amazon FSx was unable to disassocate the DNS alias from the file system.

CreateBackup (updated)

Link ¶
Changes (response)

{'Backup': {'FileSystem': {'AdministrativeActions': {'AdministrativeActionType': {'FILE_SYSTEM_ALIAS_ASSOCIATION',
                                                                                  'FILE_SYSTEM_ALIAS_DISASSOCIATION'}},
                           'WindowsConfiguration': {'Aliases': [{'Lifecycle': 'AVAILABLE '
                                                                              '| '
                                                                              'CREATING '
                                                                              '| '
                                                                              'DELETING '
                                                                              '| '
                                                                              'CREATE_FAILED '
                                                                              '| '
                                                                              'DELETE_FAILED',
                                                                 'Name': 'string'}]}},
            'Type': {'AWS_BACKUP'}}}

Creates a backup of an existing Amazon FSx file system. Creating regular backups for your file system is a best practice, enabling you to restore a file system from a backup if an issue arises with the original file system.

For Amazon FSx for Lustre file systems, you can create a backup only for file systems with the following configuration:

a Persistent deployment type
is not linked to a data respository.

For more information about backing up Amazon FSx for Lustre file systems, see Working with FSx for Lustre backups .

For more information about backing up Amazon FSx for Lustre file systems, see Working with FSx for Windows backups .

If a backup with the specified client request token exists, and the parameters match, this operation returns the description of the existing backup. If a backup specified client request token exists, and the parameters don't match, this operation returns IncompatibleParameterError . If a backup with the specified client request token doesn't exist, CreateBackup does the following:

Creates a new Amazon FSx backup with an assigned ID, and an initial lifecycle state of CREATING .
Returns the description of the backup.

By using the idempotent operation, you can retry a CreateBackup operation without the risk of creating an extra backup. This approach can be useful when an initial call fails in a way that makes it unclear whether a backup was created. If you use the same client request token and the initial call created a backup, the operation returns a successful result because all the parameters are the same.

The CreateBackup operation returns while the backup's lifecycle state is still CREATING . You can check the backup creation status by calling the DescribeBackups operation, which returns the backup state along with other information.

See also: AWS API Documentation

Request Syntax

client.create_backup(
    FileSystemId='string',
    ClientRequestToken='string',
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ]
)

type FileSystemId

string

param FileSystemId

[REQUIRED]

The ID of the file system to back up.

type ClientRequestToken

string

param ClientRequestToken

(Optional) A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the AWS Command Line Interface (AWS CLI) or an AWS SDK.

This field is autopopulated if not provided.

type Tags

list

param Tags

(Optional) The tags to apply to the backup at backup creation. The key value of the Name tag appears in the console as the backup name. If you have set CopyTagsToBackups to true, and you specify one or more tags using the CreateBackup action, no existing file system tags are copied from the file system to the backup.

(dict) --

Specifies a key-value pair for a resource tag.
- Key (string) -- [REQUIRED]
  
  A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
- Value (string) -- [REQUIRED]
  
  A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

rtype

dict

returns

Response Syntax

{
    'Backup': {
        'BackupId': 'string',
        'Lifecycle': 'AVAILABLE'|'CREATING'|'TRANSFERRING'|'DELETED'|'FAILED',
        'FailureDetails': {
            'Message': 'string'
        },
        'Type': 'AUTOMATIC'|'USER_INITIATED'|'AWS_BACKUP',
        'ProgressPercent': 123,
        'CreationTime': datetime(2015, 1, 1),
        'KmsKeyId': 'string',
        'ResourceARN': 'string',
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'FileSystem': {
            'OwnerId': 'string',
            'CreationTime': datetime(2015, 1, 1),
            'FileSystemId': 'string',
            'FileSystemType': 'WINDOWS'|'LUSTRE',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING'|'MISCONFIGURED'|'UPDATING',
            'FailureDetails': {
                'Message': 'string'
            },
            'StorageCapacity': 123,
            'StorageType': 'SSD'|'HDD',
            'VpcId': 'string',
            'SubnetIds': [
                'string',
            ],
            'NetworkInterfaceIds': [
                'string',
            ],
            'DNSName': 'string',
            'KmsKeyId': 'string',
            'ResourceARN': 'string',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ],
            'WindowsConfiguration': {
                'ActiveDirectoryId': 'string',
                'SelfManagedActiveDirectoryConfiguration': {
                    'DomainName': 'string',
                    'OrganizationalUnitDistinguishedName': 'string',
                    'FileSystemAdministratorsGroup': 'string',
                    'UserName': 'string',
                    'DnsIps': [
                        'string',
                    ]
                },
                'DeploymentType': 'MULTI_AZ_1'|'SINGLE_AZ_1'|'SINGLE_AZ_2',
                'RemoteAdministrationEndpoint': 'string',
                'PreferredSubnetId': 'string',
                'PreferredFileServerIp': 'string',
                'ThroughputCapacity': 123,
                'MaintenanceOperationsInProgress': [
                    'PATCHING'|'BACKING_UP',
                ],
                'WeeklyMaintenanceStartTime': 'string',
                'DailyAutomaticBackupStartTime': 'string',
                'AutomaticBackupRetentionDays': 123,
                'CopyTagsToBackups': True|False,
                'Aliases': [
                    {
                        'Name': 'string',
                        'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETING'|'CREATE_FAILED'|'DELETE_FAILED'
                    },
                ]
            },
            'LustreConfiguration': {
                'WeeklyMaintenanceStartTime': 'string',
                'DataRepositoryConfiguration': {
                    'Lifecycle': 'CREATING'|'AVAILABLE'|'MISCONFIGURED'|'UPDATING'|'DELETING',
                    'ImportPath': 'string',
                    'ExportPath': 'string',
                    'ImportedFileChunkSize': 123,
                    'AutoImportPolicy': 'NONE'|'NEW'|'NEW_CHANGED',
                    'FailureDetails': {
                        'Message': 'string'
                    }
                },
                'DeploymentType': 'SCRATCH_1'|'SCRATCH_2'|'PERSISTENT_1',
                'PerUnitStorageThroughput': 123,
                'MountName': 'string',
                'DailyAutomaticBackupStartTime': 'string',
                'AutomaticBackupRetentionDays': 123,
                'CopyTagsToBackups': True|False,
                'DriveCacheType': 'NONE'|'READ'
            },
            'AdministrativeActions': [
                {
                    'AdministrativeActionType': 'FILE_SYSTEM_UPDATE'|'STORAGE_OPTIMIZATION'|'FILE_SYSTEM_ALIAS_ASSOCIATION'|'FILE_SYSTEM_ALIAS_DISASSOCIATION',
                    'ProgressPercent': 123,
                    'RequestTime': datetime(2015, 1, 1),
                    'Status': 'FAILED'|'IN_PROGRESS'|'PENDING'|'COMPLETED'|'UPDATED_OPTIMIZING',
                    'TargetFileSystemValues': {'... recursive ...'},
                    'FailureDetails': {
                        'Message': 'string'
                    }
                },
            ]
        },
        'DirectoryInformation': {
            'DomainName': 'string',
            'ActiveDirectoryId': 'string'
        }
    }
}

Response Structure

(dict) --

The response object for the CreateBackup operation.
- Backup (dict) --
  
  A description of the backup.
  - BackupId (string) --
    
    The ID of the backup.
  - Lifecycle (string) --
    
    The lifecycle status of the backup.
    - AVAILABLE - The backup is fully available.
    - CREATING - FSx is creating the backup.
    - TRANSFERRING - For Lustre file systems only; FSx is transferring the backup to S3.
    - DELETED - The backup was deleted is no longer available.
    - FAILED - Amazon FSx could not complete the backup.
  - FailureDetails (dict) --
    
    Details explaining any failures that occur when creating a backup.
    - Message (string) --
      
      A message describing the backup creation failure.
  - Type (string) --
    
    The type of the file system backup.
  - ProgressPercent (integer) --
    
    The current percent of progress of an asynchronous task.
  - CreationTime (datetime) --
    
    The time when a particular backup was created.
  - KmsKeyId (string) --
    
    The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the backup of the Amazon FSx file system's data at rest.
  - ResourceARN (string) --
    
    The Amazon Resource Name (ARN) for the backup resource.
  - Tags (list) --
    
    Tags associated with a particular file system.
    - (dict) --
      
      Specifies a key-value pair for a resource tag.
      - Key (string) --
        
        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
      - Value (string) --
        
        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .
  - FileSystem (dict) --
    
    Metadata of the file system associated with the backup. This metadata is persisted even if the file system is deleted.
    - OwnerId (string) --
      
      The AWS account that created the file system. If the file system was created by an AWS Identity and Access Management (IAM) user, the AWS account to which the IAM user belongs is the owner.
    - CreationTime (datetime) --
      
      The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.
    - FileSystemId (string) --
      
      The system-generated, unique 17-digit ID of the file system.
    - FileSystemType (string) --
      
      The type of Amazon FSx file system, either LUSTRE or WINDOWS .
    - Lifecycle (string) --
      
      The lifecycle status of the file system, following are the possible values and what they mean:
      - AVAILABLE - The file system is in a healthy state, and is reachable and available for use.
      - CREATING - Amazon FSx is creating the new file system.
      - DELETING - Amazon FSx is deleting an existing file system.
      - FAILED - An existing file system has experienced an unrecoverable failure. When creating a new file system, Amazon FSx was unable to create the file system.
      - MISCONFIGURED indicates that the file system is in a failed but recoverable state.
      - UPDATING indicates that the file system is undergoing a customer initiated update.
    - FailureDetails (dict) --
      
      A structure providing details of any failures that occur when creating the file system has failed.
      - Message (string) --
        
        A message describing any failures that occurred during file system creation.
    - StorageCapacity (integer) --
      
      The storage capacity of the file system in gigabytes (GB).
    - StorageType (string) --
      
      The storage type of the file system. Valid values are SSD and HDD . If set to SSD , the file system uses solid state drive storage. If set to HDD , the file system uses hard disk drive storage.
    - VpcId (string) --
      
      The ID of the primary VPC for the file system.
    - SubnetIds (list) --
      
      Specifies the IDs of the subnets that the file system is accessible from. For Windows MULTI_AZ_1 file system deployment type, there are two subnet IDs, one for the preferred file server and one for the standby file server. The preferred file server subnet identified in the PreferredSubnetID property. All other file systems have only one subnet ID.
      
      For Lustre file systems, and Single-AZ Windows file systems, this is the ID of the subnet that contains the endpoint for the file system. For MULTI_AZ_1 Windows file systems, the endpoint for the file system is available in the PreferredSubnetID .
      - (string) --
        
        The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.
    - NetworkInterfaceIds (list) --
      
      The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.
      
      For an Amazon FSx for Windows File Server file system, you can have one network interface ID. For an Amazon FSx for Lustre file system, you can have more than one.
      - (string) --
        
        An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .
    - DNSName (string) --
      
      The DNS name for the file system.
    - KmsKeyId (string) --
      
      The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for Amazon FSx for Windows File Server file systems and persistent Amazon FSx for Lustre file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The scratch Amazon FSx for Lustre file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .
    - ResourceARN (string) --
      
      The Amazon Resource Name (ARN) for the file system resource.
    - Tags (list) --
      
      The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .
      - (dict) --
        
        Specifies a key-value pair for a resource tag.
        
        Key (string) --
        
        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
        
        Value (string) --
        
        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .
    - WindowsConfiguration (dict) --
      
      The configuration for this Microsoft Windows file system.
      - ActiveDirectoryId (string) --
        
        The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.
      - SelfManagedActiveDirectoryConfiguration (dict) --
        
        The configuration of the self-managed Microsoft Active Directory (AD) directory to which the Windows File Server instance is joined.
        
        DomainName (string) --
        
        The fully qualified domain name of the self-managed AD directory.
        
        OrganizationalUnitDistinguishedName (string) --
        
        The fully qualified distinguished name of the organizational unit within the self-managed AD directory to which the Windows File Server instance is joined.
        
        FileSystemAdministratorsGroup (string) --
        
        The name of the domain group whose members have administrative privileges for the FSx file system.
        
        UserName (string) --
        
        The user name for the service account on your self-managed AD domain that FSx uses to join to your AD domain.
        
        DnsIps (list) --
        
        A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory.
        
        (string) --
      - DeploymentType (string) --
        
        Specifies the file system deployment type, valid values are the following:
        
        MULTI_AZ_1 - Specifies a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability, and supports SSD and HDD storage.
        
        SINGLE_AZ_1 - (Default) Specifies a file system that is configured for single AZ redundancy, only supports SSD storage.
        
        SINGLE_AZ_2 - Latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports SSD and HDD storage.
        
        For more information, see Single-AZ and Multi-AZ File Systems .
      - RemoteAdministrationEndpoint (string) --
        
        For MULTI_AZ_1 deployment types, use this endpoint when performing administrative tasks on the file system using Amazon FSx Remote PowerShell.
        
        For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this is the DNS name of the file system.
        
        This endpoint is temporarily unavailable when the file system is undergoing maintenance.
      - PreferredSubnetId (string) --
        
        For MULTI_AZ_1 deployment types, it specifies the ID of the subnet where the preferred file server is located. Must be one of the two subnet IDs specified in SubnetIds property. Amazon FSx serves traffic from this subnet except in the event of a failover to the secondary file server.
        
        For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this value is the same as that for SubnetIDs . For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems
      - PreferredFileServerIp (string) --
        
        For MULTI_AZ_1 deployment types, the IP address of the primary, or preferred, file server.
        
        Use this IP address when mounting the file system on Linux SMB clients or Windows SMB clients that are not joined to a Microsoft Active Directory. Applicable for all Windows file system deployment types. This IP address is temporarily unavailable when the file system is undergoing maintenance. For Linux and Windows SMB clients that are joined to an Active Directory, use the file system's DNSName instead. For more information on mapping and mounting file shares, see Accessing File Shares .
      - ThroughputCapacity (integer) --
        
        The throughput of an Amazon FSx file system, measured in megabytes per second.
      - MaintenanceOperationsInProgress (list) --
        
        The list of maintenance operations in progress for this file system.
        
        (string) --
        
        An enumeration specifying the currently ongoing maintenance operation.
      - WeeklyMaintenanceStartTime (string) --
        
        The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
      - DailyAutomaticBackupStartTime (string) --
        
        The preferred time to take daily automatic backups, in the UTC time zone.
      - AutomaticBackupRetentionDays (integer) --
        
        The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days.
      - CopyTagsToBackups (boolean) --
        
        A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.
      - Aliases (list) --
        
        An array of one or more DNS aliases that are currently associated with the Amazon FSx file system. Aliases allow you to use existing DNS names to access the data in your Amazon FSx file system. You can associate up to 50 aliases with a file system at any time. You can associate additional DNS aliases after you create the file system using the AssociateFileSystemAliases operation. You can remove DNS aliases from the file system after it is created using the DisassociateFileSystemAliases operation. You only need to specify the alias name in the request payload. For more information, see DNS aliases .
        
        (dict) --
        
        A DNS alias that is associated with the file system. You can use a DNS alias to access a file system using user-defined DNS names, in addition to the default DNS name that Amazon FSx assigns to the file system. For more information, see DNS aliases in the FSx for Windows File Server User Guide .
        
        Name (string) --
        
        The name of the DNS alias. The alias name has to meet the following requirements:
        
        Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
        
        Can contain alphanumeric characters and the hyphen (-).
        
        Cannot start or end with a hyphen.
        
        Can start with a numeric.
        
        For DNS names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
        
        Lifecycle (string) --
        
        Describes the state of the DNS alias.
        
        AVAILABLE - The DNS alias is associated with an Amazon FSx file system.
        
        CREATING - Amazon FSx is creating the DNS alias and associating it with the file system.
        
        CREATE_FAILED - Amazon FSx was unable to associate the DNS alias with the file system.
        
        DELETING - Amazon FSx is disassociating the DNS alias from the file system and deleting it.
        
        DELETE_FAILED - Amazon FSx was unable to disassocate the DNS alias from the file system.
    - LustreConfiguration (dict) --
      
      The configuration for the Amazon FSx for Lustre file system.
      - WeeklyMaintenanceStartTime (string) --
        
        The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
      - DataRepositoryConfiguration (dict) --
        
        The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.
        
        Lifecycle (string) --
        
        Describes the state of the file system's S3 durable data repository, if it is configured with an S3 repository. The lifecycle can have the following values:
        
        CREATING - The data repository configuration between the FSx file system and the linked S3 data repository is being created. The data repository is unavailable.
        
        AVAILABLE - The data repository is available for use.
        
        MISCONFIGURED - Amazon FSx cannot automatically import updates from the S3 bucket until the data repository configuration is corrected. For more information, see Troubleshooting a Misconfigured linked S3 bucket .
        
        UPDATING - The data repository is undergoing a customer initiated update and availability may be impacted.
        
        ImportPath (string) --
        
        The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.
        
        ExportPath (string) --
        
        The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.
        
        ImportedFileChunkSize (integer) --
        
        For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.
        
        The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.
        
        AutoImportPolicy (string) --
        
        Describes the file system's linked S3 data repository's AutoImportPolicy . The AutoImportPolicy configures how Amazon FSx keeps your file and directory listings up to date as you add or modify objects in your linked S3 bucket. AutoImportPolicy can have the following values:
        
        NONE - (Default) AutoImport is off. Amazon FSx only updates file and directory listings from the linked S3 bucket when the file system is created. FSx does not update file and directory listings for any new or changed objects after choosing this option.
        
        NEW - AutoImport is on. Amazon FSx automatically imports directory listings of any new objects added to the linked S3 bucket that do not currently exist in the FSx file system.
        
        NEW_CHANGED - AutoImport is on. Amazon FSx automatically imports file and directory listings of any new objects added to the S3 bucket and any existing objects that are changed in the S3 bucket after you choose this option.
        
        For more information, see Automatically import updates from your S3 bucket .
        
        FailureDetails (dict) --
        
        Provides detailed information about the data respository if its Lifecycle is set to MISCONFIGURED .
        
        Message (string) --
        
        A detailed error message.
      - DeploymentType (string) --
        
        The deployment type of the FSX for Lustre file system. Scratch deployment type is designed for temporary storage and shorter-term processing of data.
        
        SCRATCH_1 and SCRATCH_2 deployment types are best suited for when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .
        
        The PERSISTENT_1 deployment type is used for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options . (Default = SCRATCH_1 )
      - PerUnitStorageThroughput (integer) --
        
        Per unit storage throughput represents the megabytes per second of read or write throughput per 1 tebibyte of storage provisioned. File system throughput capacity is equal to Storage capacity (TiB) * PerUnitStorageThroughput (MB/s/TiB). This option is only valid for PERSISTENT_1 deployment types.
        
        Valid values for SSD storage: 50, 100, 200. Valid values for HDD storage: 12, 40.
      - MountName (string) --
        
        You use the MountName value when mounting the file system.
        
        For the SCRATCH_1 deployment type, this value is always "fsx ". For SCRATCH_2 and PERSISTENT_1 deployment types, this value is a string that is unique within an AWS Region.
      - DailyAutomaticBackupStartTime (string) --
        
        A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
      - AutomaticBackupRetentionDays (integer) --
        
        The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.
      - CopyTagsToBackups (boolean) --
        
        A boolean flag indicating whether tags on the file system should be copied to backups. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value. (Default = false)
      - DriveCacheType (string) --
        
        The type of drive cache used by PERSISTENT_1 file systems that are provisioned with HDD storage devices. This parameter is required when storage type is HDD. Set to READ , improve the performance for frequently accessed files and allows 20% of the total storage capacity of the file system to be cached.
        
        This parameter is required when StorageType is set to HDD.
    - AdministrativeActions (list) --
      
      A list of administrative actions for the file system that are in process or waiting to be processed. Administrative actions describe changes to the Windows file system that you have initiated using the UpdateFileSystem action.
      - (dict) --
        
        Describes a specific Amazon FSx Administrative Action for the current Windows file system.
        
        AdministrativeActionType (string) --
        
        Describes the type of administrative action, as follows:
        
        FILE_SYSTEM_UPDATE - A file system update administrative action initiated by the user from the Amazon FSx console, API (UpdateFileSystem), or CLI (update-file-system).
        
        STORAGE_OPTIMIZATION - Once the FILE_SYSTEM_UPDATE task to increase a file system's storage capacity completes successfully, a STORAGE_OPTIMIZATION task starts. Storage optimization is the process of migrating the file system data to the new, larger disks. You can track the storage migration progress using the ProgressPercent property. When STORAGE_OPTIMIZATION completes successfully, the parent FILE_SYSTEM_UPDATE action status changes to COMPLETED . For more information, see Managing Storage Capacity .
        
        FILE_SYSTEM_ALIAS_ASSOCIATION - A file system update to associate a new DNS alias with the file system. For more information, see .
        
        FILE_SYSTEM_ALIAS_DISASSOCIATION - A file system update to disassociate a DNS alias from the file system. For more information, see .
        
        ProgressPercent (integer) --
        
        Provides the percent complete of a STORAGE_OPTIMIZATION administrative action. Does not apply to any other administrative action type.
        
        RequestTime (datetime) --
        
        Time that the administrative action request was received.
        
        Status (string) --
        
        Describes the status of the administrative action, as follows:
        
        FAILED - Amazon FSx failed to process the administrative action successfully.
        
        IN_PROGRESS - Amazon FSx is processing the administrative action.
        
        PENDING - Amazon FSx is waiting to process the administrative action.
        
        COMPLETED - Amazon FSx has finished processing the administrative task.
        
        UPDATED_OPTIMIZING - For a storage capacity increase update, Amazon FSx has updated the file system with the new storage capacity, and is now performing the storage optimization process. For more information, see Managing Storage Capacity .
        
        TargetFileSystemValues (dict) --
        
        Describes the target value for the administration action, provided in the UpdateFileSystem operation. Returned for FILE_SYSTEM_UPDATE administrative actions.
        
        FailureDetails (dict) --
        
        Provides information about a failed administrative action.
        
        Message (string) --
        
        Error message providing details about the failed administrative action.
  - DirectoryInformation (dict) --
    
    The configuration of the self-managed Microsoft Active Directory (AD) to which the Windows File Server instance is joined.
    - DomainName (string) --
      
      The fully qualified domain name of the self-managed AD directory.
    - ActiveDirectoryId (string) --
      
      The ID of the AWS Managed Microsoft Active Directory instance to which the file system is joined.

CreateFileSystem (updated)

Link ¶
Changes (request, response)
Request

{'WindowsConfiguration': {'Aliases': ['string']}}

Response

{'FileSystem': {'AdministrativeActions': {'AdministrativeActionType': {'FILE_SYSTEM_ALIAS_ASSOCIATION',
                                                                       'FILE_SYSTEM_ALIAS_DISASSOCIATION'}},
                'WindowsConfiguration': {'Aliases': [{'Lifecycle': 'AVAILABLE '
                                                                   '| CREATING '
                                                                   '| DELETING '
                                                                   '| '
                                                                   'CREATE_FAILED '
                                                                   '| '
                                                                   'DELETE_FAILED',
                                                      'Name': 'string'}]}}}

Creates a new, empty Amazon FSx file system.

If a file system with the specified client request token exists and the parameters match, CreateFileSystem returns the description of the existing file system. If a file system specified client request token exists and the parameters don't match, this call returns IncompatibleParameterError . If a file system with the specified client request token doesn't exist, CreateFileSystem does the following:

Creates a new, empty Amazon FSx file system with an assigned ID, and an initial lifecycle state of CREATING .
Returns the description of the file system.

This operation requires a client request token in the request that Amazon FSx uses to ensure idempotent creation. This means that calling the operation multiple times with the same client request token has no effect. By using the idempotent operation, you can retry a CreateFileSystem operation without the risk of creating an extra file system. This approach can be useful when an initial call fails in a way that makes it unclear whether a file system was created. Examples are if a transport level timeout occurred, or your connection was reset. If you use the same client request token and the initial call created a file system, the client receives success as long as the parameters are the same.

Note

The CreateFileSystem call returns while the file system's lifecycle state is still CREATING . You can check the file-system creation status by calling the DescribeFileSystems operation, which returns the file system state along with other information.

See also: AWS API Documentation

Request Syntax

client.create_file_system(
    ClientRequestToken='string',
    FileSystemType='WINDOWS'|'LUSTRE',
    StorageCapacity=123,
    StorageType='SSD'|'HDD',
    SubnetIds=[
        'string',
    ],
    SecurityGroupIds=[
        'string',
    ],
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ],
    KmsKeyId='string',
    WindowsConfiguration={
        'ActiveDirectoryId': 'string',
        'SelfManagedActiveDirectoryConfiguration': {
            'DomainName': 'string',
            'OrganizationalUnitDistinguishedName': 'string',
            'FileSystemAdministratorsGroup': 'string',
            'UserName': 'string',
            'Password': 'string',
            'DnsIps': [
                'string',
            ]
        },
        'DeploymentType': 'MULTI_AZ_1'|'SINGLE_AZ_1'|'SINGLE_AZ_2',
        'PreferredSubnetId': 'string',
        'ThroughputCapacity': 123,
        'WeeklyMaintenanceStartTime': 'string',
        'DailyAutomaticBackupStartTime': 'string',
        'AutomaticBackupRetentionDays': 123,
        'CopyTagsToBackups': True|False,
        'Aliases': [
            'string',
        ]
    },
    LustreConfiguration={
        'WeeklyMaintenanceStartTime': 'string',
        'ImportPath': 'string',
        'ExportPath': 'string',
        'ImportedFileChunkSize': 123,
        'DeploymentType': 'SCRATCH_1'|'SCRATCH_2'|'PERSISTENT_1',
        'AutoImportPolicy': 'NONE'|'NEW'|'NEW_CHANGED',
        'PerUnitStorageThroughput': 123,
        'DailyAutomaticBackupStartTime': 'string',
        'AutomaticBackupRetentionDays': 123,
        'CopyTagsToBackups': True|False,
        'DriveCacheType': 'NONE'|'READ'
    }
)

type ClientRequestToken

string

param ClientRequestToken

A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent creation. This string is automatically filled on your behalf when you use the AWS Command Line Interface (AWS CLI) or an AWS SDK.

This field is autopopulated if not provided.

type FileSystemType

string

param FileSystemType

[REQUIRED]

The type of Amazon FSx file system to create, either WINDOWS or LUSTRE .

type StorageCapacity

integer

param StorageCapacity

[REQUIRED]

Sets the storage capacity of the file system that you're creating.

For Lustre file systems:

For SCRATCH_2 and PERSISTENT_1 SSD deployment types, valid values are 1200 GiB, 2400 GiB, and increments of 2400 GiB.
For PERSISTENT HDD file systems, valid values are increments of 6000 GiB for 12 MB/s/TiB file systems and increments of 1800 GiB for 40 MB/s/TiB file systems.
For SCRATCH_1 deployment type, valid values are 1200 GiB, 2400 GiB, and increments of 3600 GiB.

For Windows file systems:

If StorageType=SSD , valid values are 32 GiB - 65,536 GiB (64 TiB).
If StorageType=HDD , valid values are 2000 GiB - 65,536 GiB (64 TiB).

type StorageType

string

param StorageType

Sets the storage type for the file system you're creating. Valid values are SSD and HDD .

Set to SSD to use solid state drive storage. SSD is supported on all Windows and Lustre deployment types.
Set to HDD to use hard disk drive storage. HDD is supported on SINGLE_AZ_2 and MULTI_AZ_1 Windows file system deployment types, and on PERSISTENT Lustre file system deployment types.

Default value is SSD . For more information, see Storage Type Options in the Amazon FSx for Windows User Guide and Multiple Storage Options in the Amazon FSx for Lustre User Guide .

type SubnetIds

list

param SubnetIds

[REQUIRED]

Specifies the IDs of the subnets that the file system will be accessible from. For Windows MULTI_AZ_1 file system deployment types, provide exactly two subnet IDs, one for the preferred file server and one for the standby file server. You specify one of these subnets as the preferred subnet using the WindowsConfiguration > PreferredSubnetID property.

For Windows SINGLE_AZ_1 and SINGLE_AZ_2 file system deployment types and Lustre file systems, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.

(string) --

The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

type SecurityGroupIds

list

param SecurityGroupIds

A list of IDs specifying the security groups to apply to all network interfaces created for file system access. This list isn't returned in later requests to describe the file system.

(string) --

The ID of your Amazon EC2 security group. This ID is used to control network access to the endpoint that Amazon FSx creates on your behalf in each subnet. For more information, see Amazon EC2 Security Groups for Linux Instances in the Amazon EC2 User Guide .

type Tags

list

param Tags

The tags to apply to the file system being created. The key value of the Name tag appears in the console as the file system name.

(dict) --

Specifies a key-value pair for a resource tag.
- Key (string) -- [REQUIRED]
  
  A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
- Value (string) -- [REQUIRED]
  
  A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

type KmsKeyId

string

param KmsKeyId

The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for Amazon FSx for Windows File Server file systems and Amazon FSx for Lustre PERSISTENT_1 file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The Amazon FSx for Lustre SCRATCH_1 and SCRATCH_2 file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .

type WindowsConfiguration

dict

param WindowsConfiguration

The Microsoft Windows configuration for the file system being created.

ActiveDirectoryId (string) --

The ID for an existing AWS Managed Microsoft Active Directory (AD) instance that the file system should join when it's created.
SelfManagedActiveDirectoryConfiguration (dict) --

The configuration that Amazon FSx uses to join the Windows File Server instance to your self-managed (including on-premises) Microsoft Active Directory (AD) directory.
- DomainName (string) -- [REQUIRED]
  
  The fully qualified domain name of the self-managed AD directory, such as corp.example.com .
- OrganizationalUnitDistinguishedName (string) --
  
  (Optional) The fully qualified distinguished name of the organizational unit within your self-managed AD directory that the Windows File Server instance will join. Amazon FSx only accepts OU as the direct parent of the file system. An example is OU=FSx,DC=yourdomain,DC=corp,DC=com . To learn more, see RFC 2253 . If none is provided, the FSx file system is created in the default location of your self-managed AD directory.
  
  Warning
  
  Only Organizational Unit (OU) objects can be the direct parent of the file system that you're creating.
- FileSystemAdministratorsGroup (string) --
  
  (Optional) The name of the domain group whose members are granted administrative privileges for the file system. Administrative privileges include taking ownership of files and folders, setting audit controls (audit ACLs) on files and folders, and administering the file system remotely by using the FSx Remote PowerShell. The group that you specify must already exist in your domain. If you don't provide one, your AD domain's Domain Admins group is used.
- UserName (string) -- [REQUIRED]
  
  The user name for the service account on your self-managed AD domain that Amazon FSx will use to join to your AD domain. This account must have the permission to join computers to the domain in the organizational unit provided in OrganizationalUnitDistinguishedName , or in the default location of your AD domain.
- Password (string) -- [REQUIRED]
  
  The password for the service account on your self-managed AD domain that Amazon FSx will use to join to your AD domain.
- DnsIps (list) -- [REQUIRED]
  
  A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory. The IP addresses need to be either in the same VPC CIDR range as the one in which your Amazon FSx file system is being created, or in the private IP version 4 (IPv4) address ranges, as specified in RFC 1918 :
  - 10.0.0.0 - 10.255.255.255 (10/8 prefix)
  - 172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
  - 192.168.0.0 - 192.168.255.255 (192.168/16 prefix)
  - (string) --
DeploymentType (string) --

Specifies the file system deployment type, valid values are the following:
- MULTI_AZ_1 - Deploys a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. You can only deploy a Multi-AZ file system in AWS Regions that have a minimum of three Availability Zones. Also supports HDD storage type
- SINGLE_AZ_1 - (Default) Choose to deploy a file system that is configured for single AZ redundancy.
- SINGLE_AZ_2 - The latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports HDD storage type.
For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems .
PreferredSubnetId (string) --

Required when DeploymentType is set to MULTI_AZ_1 . This specifies the subnet in which you want the preferred file server to be located. For in-AWS applications, we recommend that you launch your clients in the same Availability Zone (AZ) as your preferred file server to reduce cross-AZ data transfer costs and minimize latency.
ThroughputCapacity (integer) -- [REQUIRED]

The throughput of an Amazon FSx file system, measured in megabytes per second, in 2 to the n th increments, between 2^3 (8) and 2^11 (2048).
WeeklyMaintenanceStartTime (string) --

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
DailyAutomaticBackupStartTime (string) --

The preferred time to take daily automatic backups, formatted HH:MM in the UTC time zone.
AutomaticBackupRetentionDays (integer) --

The number of days to retain automatic backups. The default is to retain backups for 7 days. Setting this value to 0 disables the creation of automatic backups. The maximum retention period for backups is 90 days.
CopyTagsToBackups (boolean) --

A boolean flag indicating whether tags for the file system should be copied to backups. This value defaults to false. If it's set to true, all tags for the file system are copied to all automatic and user-initiated backups where the user doesn't specify tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.
Aliases (list) --

An array of one or more DNS alias names that you want to associate with the Amazon FSx file system. Aliases allow you to use existing DNS names to access the data in your Amazon FSx file system. You can associate up to 50 aliases with a file system at any time. You can associate additional DNS aliases after you create the file system using the AssociateFileSystemAliases operation. You can remove DNS aliases from the file system after it is created using the DisassociateFileSystemAliases operation. You only need to specify the alias name in the request payload.

For more information, see Working with DNS Aliases and Walkthrough 5: Using DNS aliases to access your file system , including additional steps you must take to be able to access your file system using a DNS alias.

An alias name has to meet the following requirements:
- Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
- Can contain alphanumeric characters and the hyphen (-).
- Cannot start or end with a hyphen.
- Can start with a numeric.
For DNS alias names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
- (string) --

type LustreConfiguration

dict

param LustreConfiguration

The Lustre configuration for the file system being created.

WeeklyMaintenanceStartTime (string) --

(Optional) The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
ImportPath (string) --

(Optional) The path to the Amazon S3 bucket (including the optional prefix) that you're using as the data repository for your Amazon FSx for Lustre file system. The root of your FSx for Lustre file system will be mapped to the root of the Amazon S3 bucket you select. An example is s3://import-bucket/optional-prefix . If you specify a prefix after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.
ExportPath (string) --

(Optional) The path in Amazon S3 where the root of your Amazon FSx file system is exported. The path must use the same Amazon S3 bucket as specified in ImportPath. You can provide an optional prefix to which new and changed data is to be exported from your Amazon FSx for Lustre file system. If an ExportPath value is not provided, Amazon FSx sets a default export path, s3://import-bucket/FSxLustre[creation-timestamp] . The timestamp is in UTC format, for example s3://import-bucket/FSxLustre20181105T222312Z .

The Amazon S3 export bucket must be the same as the import bucket specified by ImportPath . If you only specify a bucket name, such as s3://import-bucket , you get a 1:1 mapping of file system objects to S3 bucket objects. This mapping means that the input data in S3 is overwritten on export. If you provide a custom prefix in the export path, such as s3://import-bucket/[custom-optional-prefix] , Amazon FSx exports the contents of your file system to that export prefix in the Amazon S3 bucket.
ImportedFileChunkSize (integer) --

(Optional) For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.
DeploymentType (string) --

Choose SCRATCH_1 and SCRATCH_2 deployment types when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .

Choose PERSISTENT_1 deployment type for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options .

Encryption of data in-transit is automatically enabled when you access a SCRATCH_2 or PERSISTENT_1 file system from Amazon EC2 instances that support this feature . (Default = SCRATCH_1 )

Encryption of data in-transit for SCRATCH_2 and PERSISTENT_1 deployment types is supported when accessed from supported instance types in supported AWS Regions. To learn more, Encrypting Data in Transit .
AutoImportPolicy (string) --

(Optional) When you create your file system, your existing S3 objects appear as file and directory listings. Use this property to choose how Amazon FSx keeps your file and directory listings up to date as you add or modify objects in your linked S3 bucket. AutoImportPolicy can have the following values:
- NONE - (Default) AutoImport is off. Amazon FSx only updates file and directory listings from the linked S3 bucket when the file system is created. FSx does not update file and directory listings for any new or changed objects after choosing this option.
- NEW - AutoImport is on. Amazon FSx automatically imports directory listings of any new objects added to the linked S3 bucket that do not currently exist in the FSx file system.
- NEW_CHANGED - AutoImport is on. Amazon FSx automatically imports file and directory listings of any new objects added to the S3 bucket and any existing objects that are changed in the S3 bucket after you choose this option.
For more information, see Automatically import updates from your S3 bucket .
PerUnitStorageThroughput (integer) --

Required for the PERSISTENT_1 deployment type, describes the amount of read and write throughput for each 1 tebibyte of storage, in MB/s/TiB. File system throughput capacity is calculated by multiplying ﬁle system storage capacity (TiB) by the PerUnitStorageThroughput (MB/s/TiB). For a 2.4 TiB ﬁle system, provisioning 50 MB/s/TiB of PerUnitStorageThroughput yields 120 MB/s of ﬁle system throughput. You pay for the amount of throughput that you provision.

Valid values for SSD storage: 50, 100, 200. Valid values for HDD storage: 12, 40.
DailyAutomaticBackupStartTime (string) --

A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
AutomaticBackupRetentionDays (integer) --

The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.
CopyTagsToBackups (boolean) --

(Optional) Not available to use with file systems that are linked to a data repository. A boolean flag indicating whether tags for the file system should be copied to backups. The default value is false. If it's set to true, all file system tags are copied to all automatic and user-initiated backups when the user doesn't specify any backup-specific tags. If this value is true, and you specify one or more backup tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.

For more information, see Working with backups .
DriveCacheType (string) --

The type of drive cache used by PERSISTENT_1 file systems that are provisioned with HDD storage devices. This parameter is required when storage type is HDD. Set to READ , improve the performance for frequently accessed files and allows 20% of the total storage capacity of the file system to be cached.

This parameter is required when StorageType is set to HDD.

rtype

dict

returns

Response Syntax

{
    'FileSystem': {
        'OwnerId': 'string',
        'CreationTime': datetime(2015, 1, 1),
        'FileSystemId': 'string',
        'FileSystemType': 'WINDOWS'|'LUSTRE',
        'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING'|'MISCONFIGURED'|'UPDATING',
        'FailureDetails': {
            'Message': 'string'
        },
        'StorageCapacity': 123,
        'StorageType': 'SSD'|'HDD',
        'VpcId': 'string',
        'SubnetIds': [
            'string',
        ],
        'NetworkInterfaceIds': [
            'string',
        ],
        'DNSName': 'string',
        'KmsKeyId': 'string',
        'ResourceARN': 'string',
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'WindowsConfiguration': {
            'ActiveDirectoryId': 'string',
            'SelfManagedActiveDirectoryConfiguration': {
                'DomainName': 'string',
                'OrganizationalUnitDistinguishedName': 'string',
                'FileSystemAdministratorsGroup': 'string',
                'UserName': 'string',
                'DnsIps': [
                    'string',
                ]
            },
            'DeploymentType': 'MULTI_AZ_1'|'SINGLE_AZ_1'|'SINGLE_AZ_2',
            'RemoteAdministrationEndpoint': 'string',
            'PreferredSubnetId': 'string',
            'PreferredFileServerIp': 'string',
            'ThroughputCapacity': 123,
            'MaintenanceOperationsInProgress': [
                'PATCHING'|'BACKING_UP',
            ],
            'WeeklyMaintenanceStartTime': 'string',
            'DailyAutomaticBackupStartTime': 'string',
            'AutomaticBackupRetentionDays': 123,
            'CopyTagsToBackups': True|False,
            'Aliases': [
                {
                    'Name': 'string',
                    'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETING'|'CREATE_FAILED'|'DELETE_FAILED'
                },
            ]
        },
        'LustreConfiguration': {
            'WeeklyMaintenanceStartTime': 'string',
            'DataRepositoryConfiguration': {
                'Lifecycle': 'CREATING'|'AVAILABLE'|'MISCONFIGURED'|'UPDATING'|'DELETING',
                'ImportPath': 'string',
                'ExportPath': 'string',
                'ImportedFileChunkSize': 123,
                'AutoImportPolicy': 'NONE'|'NEW'|'NEW_CHANGED',
                'FailureDetails': {
                    'Message': 'string'
                }
            },
            'DeploymentType': 'SCRATCH_1'|'SCRATCH_2'|'PERSISTENT_1',
            'PerUnitStorageThroughput': 123,
            'MountName': 'string',
            'DailyAutomaticBackupStartTime': 'string',
            'AutomaticBackupRetentionDays': 123,
            'CopyTagsToBackups': True|False,
            'DriveCacheType': 'NONE'|'READ'
        },
        'AdministrativeActions': [
            {
                'AdministrativeActionType': 'FILE_SYSTEM_UPDATE'|'STORAGE_OPTIMIZATION'|'FILE_SYSTEM_ALIAS_ASSOCIATION'|'FILE_SYSTEM_ALIAS_DISASSOCIATION',
                'ProgressPercent': 123,
                'RequestTime': datetime(2015, 1, 1),
                'Status': 'FAILED'|'IN_PROGRESS'|'PENDING'|'COMPLETED'|'UPDATED_OPTIMIZING',
                'TargetFileSystemValues': {'... recursive ...'},
                'FailureDetails': {
                    'Message': 'string'
                }
            },
        ]
    }
}

Response Structure

(dict) --

The response object returned after the file system is created.
- FileSystem (dict) --
  
  The configuration of the file system that was created.
  - OwnerId (string) --
    
    The AWS account that created the file system. If the file system was created by an AWS Identity and Access Management (IAM) user, the AWS account to which the IAM user belongs is the owner.
  - CreationTime (datetime) --
    
    The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.
  - FileSystemId (string) --
    
    The system-generated, unique 17-digit ID of the file system.
  - FileSystemType (string) --
    
    The type of Amazon FSx file system, either LUSTRE or WINDOWS .
  - Lifecycle (string) --
    
    The lifecycle status of the file system, following are the possible values and what they mean:
    - AVAILABLE - The file system is in a healthy state, and is reachable and available for use.
    - CREATING - Amazon FSx is creating the new file system.
    - DELETING - Amazon FSx is deleting an existing file system.
    - FAILED - An existing file system has experienced an unrecoverable failure. When creating a new file system, Amazon FSx was unable to create the file system.
    - MISCONFIGURED indicates that the file system is in a failed but recoverable state.
    - UPDATING indicates that the file system is undergoing a customer initiated update.
  - FailureDetails (dict) --
    
    A structure providing details of any failures that occur when creating the file system has failed.
    - Message (string) --
      
      A message describing any failures that occurred during file system creation.
  - StorageCapacity (integer) --
    
    The storage capacity of the file system in gigabytes (GB).
  - StorageType (string) --
    
    The storage type of the file system. Valid values are SSD and HDD . If set to SSD , the file system uses solid state drive storage. If set to HDD , the file system uses hard disk drive storage.
  - VpcId (string) --
    
    The ID of the primary VPC for the file system.
  - SubnetIds (list) --
    
    Specifies the IDs of the subnets that the file system is accessible from. For Windows MULTI_AZ_1 file system deployment type, there are two subnet IDs, one for the preferred file server and one for the standby file server. The preferred file server subnet identified in the PreferredSubnetID property. All other file systems have only one subnet ID.
    
    For Lustre file systems, and Single-AZ Windows file systems, this is the ID of the subnet that contains the endpoint for the file system. For MULTI_AZ_1 Windows file systems, the endpoint for the file system is available in the PreferredSubnetID .
    - (string) --
      
      The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.
  - NetworkInterfaceIds (list) --
    
    The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.
    
    For an Amazon FSx for Windows File Server file system, you can have one network interface ID. For an Amazon FSx for Lustre file system, you can have more than one.
    - (string) --
      
      An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .
  - DNSName (string) --
    
    The DNS name for the file system.
  - KmsKeyId (string) --
    
    The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for Amazon FSx for Windows File Server file systems and persistent Amazon FSx for Lustre file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The scratch Amazon FSx for Lustre file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .
  - ResourceARN (string) --
    
    The Amazon Resource Name (ARN) for the file system resource.
  - Tags (list) --
    
    The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .
    - (dict) --
      
      Specifies a key-value pair for a resource tag.
      - Key (string) --
        
        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
      - Value (string) --
        
        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .
  - WindowsConfiguration (dict) --
    
    The configuration for this Microsoft Windows file system.
    - ActiveDirectoryId (string) --
      
      The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.
    - SelfManagedActiveDirectoryConfiguration (dict) --
      
      The configuration of the self-managed Microsoft Active Directory (AD) directory to which the Windows File Server instance is joined.
      - DomainName (string) --
        
        The fully qualified domain name of the self-managed AD directory.
      - OrganizationalUnitDistinguishedName (string) --
        
        The fully qualified distinguished name of the organizational unit within the self-managed AD directory to which the Windows File Server instance is joined.
      - FileSystemAdministratorsGroup (string) --
        
        The name of the domain group whose members have administrative privileges for the FSx file system.
      - UserName (string) --
        
        The user name for the service account on your self-managed AD domain that FSx uses to join to your AD domain.
      - DnsIps (list) --
        
        A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory.
        
        (string) --
    - DeploymentType (string) --
      
      Specifies the file system deployment type, valid values are the following:
      - MULTI_AZ_1 - Specifies a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability, and supports SSD and HDD storage.
      - SINGLE_AZ_1 - (Default) Specifies a file system that is configured for single AZ redundancy, only supports SSD storage.
      - SINGLE_AZ_2 - Latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports SSD and HDD storage.
      For more information, see Single-AZ and Multi-AZ File Systems .
    - RemoteAdministrationEndpoint (string) --
      
      For MULTI_AZ_1 deployment types, use this endpoint when performing administrative tasks on the file system using Amazon FSx Remote PowerShell.
      
      For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this is the DNS name of the file system.
      
      This endpoint is temporarily unavailable when the file system is undergoing maintenance.
    - PreferredSubnetId (string) --
      
      For MULTI_AZ_1 deployment types, it specifies the ID of the subnet where the preferred file server is located. Must be one of the two subnet IDs specified in SubnetIds property. Amazon FSx serves traffic from this subnet except in the event of a failover to the secondary file server.
      
      For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this value is the same as that for SubnetIDs . For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems
    - PreferredFileServerIp (string) --
      
      For MULTI_AZ_1 deployment types, the IP address of the primary, or preferred, file server.
      
      Use this IP address when mounting the file system on Linux SMB clients or Windows SMB clients that are not joined to a Microsoft Active Directory. Applicable for all Windows file system deployment types. This IP address is temporarily unavailable when the file system is undergoing maintenance. For Linux and Windows SMB clients that are joined to an Active Directory, use the file system's DNSName instead. For more information on mapping and mounting file shares, see Accessing File Shares .
    - ThroughputCapacity (integer) --
      
      The throughput of an Amazon FSx file system, measured in megabytes per second.
    - MaintenanceOperationsInProgress (list) --
      
      The list of maintenance operations in progress for this file system.
      - (string) --
        
        An enumeration specifying the currently ongoing maintenance operation.
    - WeeklyMaintenanceStartTime (string) --
      
      The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
    - DailyAutomaticBackupStartTime (string) --
      
      The preferred time to take daily automatic backups, in the UTC time zone.
    - AutomaticBackupRetentionDays (integer) --
      
      The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days.
    - CopyTagsToBackups (boolean) --
      
      A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.
    - Aliases (list) --
      
      An array of one or more DNS aliases that are currently associated with the Amazon FSx file system. Aliases allow you to use existing DNS names to access the data in your Amazon FSx file system. You can associate up to 50 aliases with a file system at any time. You can associate additional DNS aliases after you create the file system using the AssociateFileSystemAliases operation. You can remove DNS aliases from the file system after it is created using the DisassociateFileSystemAliases operation. You only need to specify the alias name in the request payload. For more information, see DNS aliases .
      - (dict) --
        
        A DNS alias that is associated with the file system. You can use a DNS alias to access a file system using user-defined DNS names, in addition to the default DNS name that Amazon FSx assigns to the file system. For more information, see DNS aliases in the FSx for Windows File Server User Guide .
        
        Name (string) --
        
        The name of the DNS alias. The alias name has to meet the following requirements:
        
        Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
        
        Can contain alphanumeric characters and the hyphen (-).
        
        Cannot start or end with a hyphen.
        
        Can start with a numeric.
        
        For DNS names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
        
        Lifecycle (string) --
        
        Describes the state of the DNS alias.
        
        AVAILABLE - The DNS alias is associated with an Amazon FSx file system.
        
        CREATING - Amazon FSx is creating the DNS alias and associating it with the file system.
        
        CREATE_FAILED - Amazon FSx was unable to associate the DNS alias with the file system.
        
        DELETING - Amazon FSx is disassociating the DNS alias from the file system and deleting it.
        
        DELETE_FAILED - Amazon FSx was unable to disassocate the DNS alias from the file system.
  - LustreConfiguration (dict) --
    
    The configuration for the Amazon FSx for Lustre file system.
    - WeeklyMaintenanceStartTime (string) --
      
      The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
    - DataRepositoryConfiguration (dict) --
      
      The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.
      - Lifecycle (string) --
        
        Describes the state of the file system's S3 durable data repository, if it is configured with an S3 repository. The lifecycle can have the following values:
        
        CREATING - The data repository configuration between the FSx file system and the linked S3 data repository is being created. The data repository is unavailable.
        
        AVAILABLE - The data repository is available for use.
        
        MISCONFIGURED - Amazon FSx cannot automatically import updates from the S3 bucket until the data repository configuration is corrected. For more information, see Troubleshooting a Misconfigured linked S3 bucket .
        
        UPDATING - The data repository is undergoing a customer initiated update and availability may be impacted.
      - ImportPath (string) --
        
        The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.
      - ExportPath (string) --
        
        The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.
      - ImportedFileChunkSize (integer) --
        
        For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.
        
        The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.
      - AutoImportPolicy (string) --
        
        Describes the file system's linked S3 data repository's AutoImportPolicy . The AutoImportPolicy configures how Amazon FSx keeps your file and directory listings up to date as you add or modify objects in your linked S3 bucket. AutoImportPolicy can have the following values:
        
        NONE - (Default) AutoImport is off. Amazon FSx only updates file and directory listings from the linked S3 bucket when the file system is created. FSx does not update file and directory listings for any new or changed objects after choosing this option.
        
        NEW - AutoImport is on. Amazon FSx automatically imports directory listings of any new objects added to the linked S3 bucket that do not currently exist in the FSx file system.
        
        NEW_CHANGED - AutoImport is on. Amazon FSx automatically imports file and directory listings of any new objects added to the S3 bucket and any existing objects that are changed in the S3 bucket after you choose this option.
        
        For more information, see Automatically import updates from your S3 bucket .
      - FailureDetails (dict) --
        
        Provides detailed information about the data respository if its Lifecycle is set to MISCONFIGURED .
        
        Message (string) --
        
        A detailed error message.
    - DeploymentType (string) --
      
      The deployment type of the FSX for Lustre file system. Scratch deployment type is designed for temporary storage and shorter-term processing of data.
      
      SCRATCH_1 and SCRATCH_2 deployment types are best suited for when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .
      
      The PERSISTENT_1 deployment type is used for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options . (Default = SCRATCH_1 )
    - PerUnitStorageThroughput (integer) --
      
      Per unit storage throughput represents the megabytes per second of read or write throughput per 1 tebibyte of storage provisioned. File system throughput capacity is equal to Storage capacity (TiB) * PerUnitStorageThroughput (MB/s/TiB). This option is only valid for PERSISTENT_1 deployment types.
      
      Valid values for SSD storage: 50, 100, 200. Valid values for HDD storage: 12, 40.
    - MountName (string) --
      
      You use the MountName value when mounting the file system.
      
      For the SCRATCH_1 deployment type, this value is always "fsx ". For SCRATCH_2 and PERSISTENT_1 deployment types, this value is a string that is unique within an AWS Region.
    - DailyAutomaticBackupStartTime (string) --
      
      A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
    - AutomaticBackupRetentionDays (integer) --
      
      The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.
    - CopyTagsToBackups (boolean) --
      
      A boolean flag indicating whether tags on the file system should be copied to backups. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value. (Default = false)
    - DriveCacheType (string) --
      
      The type of drive cache used by PERSISTENT_1 file systems that are provisioned with HDD storage devices. This parameter is required when storage type is HDD. Set to READ , improve the performance for frequently accessed files and allows 20% of the total storage capacity of the file system to be cached.
      
      This parameter is required when StorageType is set to HDD.
  - AdministrativeActions (list) --
    
    A list of administrative actions for the file system that are in process or waiting to be processed. Administrative actions describe changes to the Windows file system that you have initiated using the UpdateFileSystem action.
    - (dict) --
      
      Describes a specific Amazon FSx Administrative Action for the current Windows file system.
      - AdministrativeActionType (string) --
        
        Describes the type of administrative action, as follows:
        
        FILE_SYSTEM_UPDATE - A file system update administrative action initiated by the user from the Amazon FSx console, API (UpdateFileSystem), or CLI (update-file-system).
        
        STORAGE_OPTIMIZATION - Once the FILE_SYSTEM_UPDATE task to increase a file system's storage capacity completes successfully, a STORAGE_OPTIMIZATION task starts. Storage optimization is the process of migrating the file system data to the new, larger disks. You can track the storage migration progress using the ProgressPercent property. When STORAGE_OPTIMIZATION completes successfully, the parent FILE_SYSTEM_UPDATE action status changes to COMPLETED . For more information, see Managing Storage Capacity .
        
        FILE_SYSTEM_ALIAS_ASSOCIATION - A file system update to associate a new DNS alias with the file system. For more information, see .
        
        FILE_SYSTEM_ALIAS_DISASSOCIATION - A file system update to disassociate a DNS alias from the file system. For more information, see .
      - ProgressPercent (integer) --
        
        Provides the percent complete of a STORAGE_OPTIMIZATION administrative action. Does not apply to any other administrative action type.
      - RequestTime (datetime) --
        
        Time that the administrative action request was received.
      - Status (string) --
        
        Describes the status of the administrative action, as follows:
        
        FAILED - Amazon FSx failed to process the administrative action successfully.
        
        IN_PROGRESS - Amazon FSx is processing the administrative action.
        
        PENDING - Amazon FSx is waiting to process the administrative action.
        
        COMPLETED - Amazon FSx has finished processing the administrative task.
        
        UPDATED_OPTIMIZING - For a storage capacity increase update, Amazon FSx has updated the file system with the new storage capacity, and is now performing the storage optimization process. For more information, see Managing Storage Capacity .
      - TargetFileSystemValues (dict) --
        
        Describes the target value for the administration action, provided in the UpdateFileSystem operation. Returned for FILE_SYSTEM_UPDATE administrative actions.
      - FailureDetails (dict) --
        
        Provides information about a failed administrative action.
        
        Message (string) --
        
        Error message providing details about the failed administrative action.

CreateFileSystemFromBackup (updated)

Link ¶
Changes (request, response)
Request

{'WindowsConfiguration': {'Aliases': ['string']}}

Response

{'FileSystem': {'AdministrativeActions': {'AdministrativeActionType': {'FILE_SYSTEM_ALIAS_ASSOCIATION',
                                                                       'FILE_SYSTEM_ALIAS_DISASSOCIATION'}},
                'WindowsConfiguration': {'Aliases': [{'Lifecycle': 'AVAILABLE '
                                                                   '| CREATING '
                                                                   '| DELETING '
                                                                   '| '
                                                                   'CREATE_FAILED '
                                                                   '| '
                                                                   'DELETE_FAILED',
                                                      'Name': 'string'}]}}}

Creates a new Amazon FSx file system from an existing Amazon FSx backup.

If a file system with the specified client request token exists and the parameters match, this operation returns the description of the file system. If a client request token specified by the file system exists and the parameters don't match, this call returns IncompatibleParameterError . If a file system with the specified client request token doesn't exist, this operation does the following:

Creates a new Amazon FSx file system from backup with an assigned ID, and an initial lifecycle state of CREATING .
Returns the description of the file system.

Parameters like Active Directory, default share name, automatic backup, and backup settings default to the parameters of the file system that was backed up, unless overridden. You can explicitly supply other settings.

By using the idempotent operation, you can retry a CreateFileSystemFromBackup call without the risk of creating an extra file system. This approach can be useful when an initial call fails in a way that makes it unclear whether a file system was created. Examples are if a transport level timeout occurred, or your connection was reset. If you use the same client request token and the initial call created a file system, the client receives success as long as the parameters are the same.

Note

The CreateFileSystemFromBackup call returns while the file system's lifecycle state is still CREATING . You can check the file-system creation status by calling the DescribeFileSystems operation, which returns the file system state along with other information.

See also: AWS API Documentation

Request Syntax

client.create_file_system_from_backup(
    BackupId='string',
    ClientRequestToken='string',
    SubnetIds=[
        'string',
    ],
    SecurityGroupIds=[
        'string',
    ],
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ],
    WindowsConfiguration={
        'ActiveDirectoryId': 'string',
        'SelfManagedActiveDirectoryConfiguration': {
            'DomainName': 'string',
            'OrganizationalUnitDistinguishedName': 'string',
            'FileSystemAdministratorsGroup': 'string',
            'UserName': 'string',
            'Password': 'string',
            'DnsIps': [
                'string',
            ]
        },
        'DeploymentType': 'MULTI_AZ_1'|'SINGLE_AZ_1'|'SINGLE_AZ_2',
        'PreferredSubnetId': 'string',
        'ThroughputCapacity': 123,
        'WeeklyMaintenanceStartTime': 'string',
        'DailyAutomaticBackupStartTime': 'string',
        'AutomaticBackupRetentionDays': 123,
        'CopyTagsToBackups': True|False,
        'Aliases': [
            'string',
        ]
    },
    LustreConfiguration={
        'WeeklyMaintenanceStartTime': 'string',
        'ImportPath': 'string',
        'ExportPath': 'string',
        'ImportedFileChunkSize': 123,
        'DeploymentType': 'SCRATCH_1'|'SCRATCH_2'|'PERSISTENT_1',
        'AutoImportPolicy': 'NONE'|'NEW'|'NEW_CHANGED',
        'PerUnitStorageThroughput': 123,
        'DailyAutomaticBackupStartTime': 'string',
        'AutomaticBackupRetentionDays': 123,
        'CopyTagsToBackups': True|False,
        'DriveCacheType': 'NONE'|'READ'
    },
    StorageType='SSD'|'HDD'
)

type BackupId

string

param BackupId

[REQUIRED]

The ID of the backup. Specifies the backup to use if you're creating a file system from an existing backup.

type ClientRequestToken

string

param ClientRequestToken

This field is autopopulated if not provided.

type SubnetIds

list

param SubnetIds

[REQUIRED]

For Windows SINGLE_AZ_1 and SINGLE_AZ_2 deployment types and Lustre file systems, provide exactly one subnet ID. The file server is launched in that subnet's Availability Zone.

(string) --

The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.

type SecurityGroupIds

list

param SecurityGroupIds

A list of IDs for the security groups that apply to the specified network interfaces created for file system access. These security groups apply to all network interfaces. This value isn't returned in later DescribeFileSystem requests.

(string) --

The ID of your Amazon EC2 security group. This ID is used to control network access to the endpoint that Amazon FSx creates on your behalf in each subnet. For more information, see Amazon EC2 Security Groups for Linux Instances in the Amazon EC2 User Guide .

type Tags

list

param Tags

The tags to be applied to the file system at file system creation. The key value of the Name tag appears in the console as the file system name.

(dict) --

Specifies a key-value pair for a resource tag.
- Key (string) -- [REQUIRED]
  
  A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
- Value (string) -- [REQUIRED]
  
  A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .

type WindowsConfiguration

dict

param WindowsConfiguration

The configuration for this Microsoft Windows file system.

ActiveDirectoryId (string) --

The ID for an existing AWS Managed Microsoft Active Directory (AD) instance that the file system should join when it's created.
SelfManagedActiveDirectoryConfiguration (dict) --

The configuration that Amazon FSx uses to join the Windows File Server instance to your self-managed (including on-premises) Microsoft Active Directory (AD) directory.
- DomainName (string) -- [REQUIRED]
  
  The fully qualified domain name of the self-managed AD directory, such as corp.example.com .
- OrganizationalUnitDistinguishedName (string) --
  
  (Optional) The fully qualified distinguished name of the organizational unit within your self-managed AD directory that the Windows File Server instance will join. Amazon FSx only accepts OU as the direct parent of the file system. An example is OU=FSx,DC=yourdomain,DC=corp,DC=com . To learn more, see RFC 2253 . If none is provided, the FSx file system is created in the default location of your self-managed AD directory.
  
  Warning
  
  Only Organizational Unit (OU) objects can be the direct parent of the file system that you're creating.
- FileSystemAdministratorsGroup (string) --
  
  (Optional) The name of the domain group whose members are granted administrative privileges for the file system. Administrative privileges include taking ownership of files and folders, setting audit controls (audit ACLs) on files and folders, and administering the file system remotely by using the FSx Remote PowerShell. The group that you specify must already exist in your domain. If you don't provide one, your AD domain's Domain Admins group is used.
- UserName (string) -- [REQUIRED]
  
  The user name for the service account on your self-managed AD domain that Amazon FSx will use to join to your AD domain. This account must have the permission to join computers to the domain in the organizational unit provided in OrganizationalUnitDistinguishedName , or in the default location of your AD domain.
- Password (string) -- [REQUIRED]
  
  The password for the service account on your self-managed AD domain that Amazon FSx will use to join to your AD domain.
- DnsIps (list) -- [REQUIRED]
  
  A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory. The IP addresses need to be either in the same VPC CIDR range as the one in which your Amazon FSx file system is being created, or in the private IP version 4 (IPv4) address ranges, as specified in RFC 1918 :
  - 10.0.0.0 - 10.255.255.255 (10/8 prefix)
  - 172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
  - 192.168.0.0 - 192.168.255.255 (192.168/16 prefix)
  - (string) --
DeploymentType (string) --

Specifies the file system deployment type, valid values are the following:
- MULTI_AZ_1 - Deploys a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability. You can only deploy a Multi-AZ file system in AWS Regions that have a minimum of three Availability Zones. Also supports HDD storage type
- SINGLE_AZ_1 - (Default) Choose to deploy a file system that is configured for single AZ redundancy.
- SINGLE_AZ_2 - The latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports HDD storage type.
For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems .
PreferredSubnetId (string) --

Required when DeploymentType is set to MULTI_AZ_1 . This specifies the subnet in which you want the preferred file server to be located. For in-AWS applications, we recommend that you launch your clients in the same Availability Zone (AZ) as your preferred file server to reduce cross-AZ data transfer costs and minimize latency.
ThroughputCapacity (integer) -- [REQUIRED]

The throughput of an Amazon FSx file system, measured in megabytes per second, in 2 to the n th increments, between 2^3 (8) and 2^11 (2048).
WeeklyMaintenanceStartTime (string) --

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
DailyAutomaticBackupStartTime (string) --

The preferred time to take daily automatic backups, formatted HH:MM in the UTC time zone.
AutomaticBackupRetentionDays (integer) --

The number of days to retain automatic backups. The default is to retain backups for 7 days. Setting this value to 0 disables the creation of automatic backups. The maximum retention period for backups is 90 days.
CopyTagsToBackups (boolean) --

A boolean flag indicating whether tags for the file system should be copied to backups. This value defaults to false. If it's set to true, all tags for the file system are copied to all automatic and user-initiated backups where the user doesn't specify tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.
Aliases (list) --

An array of one or more DNS alias names that you want to associate with the Amazon FSx file system. Aliases allow you to use existing DNS names to access the data in your Amazon FSx file system. You can associate up to 50 aliases with a file system at any time. You can associate additional DNS aliases after you create the file system using the AssociateFileSystemAliases operation. You can remove DNS aliases from the file system after it is created using the DisassociateFileSystemAliases operation. You only need to specify the alias name in the request payload.

For more information, see Working with DNS Aliases and Walkthrough 5: Using DNS aliases to access your file system , including additional steps you must take to be able to access your file system using a DNS alias.

An alias name has to meet the following requirements:
- Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
- Can contain alphanumeric characters and the hyphen (-).
- Cannot start or end with a hyphen.
- Can start with a numeric.
For DNS alias names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
- (string) --

type LustreConfiguration

dict

param LustreConfiguration

The Lustre configuration for the file system being created.

WeeklyMaintenanceStartTime (string) --

(Optional) The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone, where d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
ImportPath (string) --

(Optional) The path to the Amazon S3 bucket (including the optional prefix) that you're using as the data repository for your Amazon FSx for Lustre file system. The root of your FSx for Lustre file system will be mapped to the root of the Amazon S3 bucket you select. An example is s3://import-bucket/optional-prefix . If you specify a prefix after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.
ExportPath (string) --

(Optional) The path in Amazon S3 where the root of your Amazon FSx file system is exported. The path must use the same Amazon S3 bucket as specified in ImportPath. You can provide an optional prefix to which new and changed data is to be exported from your Amazon FSx for Lustre file system. If an ExportPath value is not provided, Amazon FSx sets a default export path, s3://import-bucket/FSxLustre[creation-timestamp] . The timestamp is in UTC format, for example s3://import-bucket/FSxLustre20181105T222312Z .

The Amazon S3 export bucket must be the same as the import bucket specified by ImportPath . If you only specify a bucket name, such as s3://import-bucket , you get a 1:1 mapping of file system objects to S3 bucket objects. This mapping means that the input data in S3 is overwritten on export. If you provide a custom prefix in the export path, such as s3://import-bucket/[custom-optional-prefix] , Amazon FSx exports the contents of your file system to that export prefix in the Amazon S3 bucket.
ImportedFileChunkSize (integer) --

(Optional) For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.

The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.
DeploymentType (string) --

Choose SCRATCH_1 and SCRATCH_2 deployment types when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .

Choose PERSISTENT_1 deployment type for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options .

Encryption of data in-transit is automatically enabled when you access a SCRATCH_2 or PERSISTENT_1 file system from Amazon EC2 instances that support this feature . (Default = SCRATCH_1 )

Encryption of data in-transit for SCRATCH_2 and PERSISTENT_1 deployment types is supported when accessed from supported instance types in supported AWS Regions. To learn more, Encrypting Data in Transit .
AutoImportPolicy (string) --

(Optional) When you create your file system, your existing S3 objects appear as file and directory listings. Use this property to choose how Amazon FSx keeps your file and directory listings up to date as you add or modify objects in your linked S3 bucket. AutoImportPolicy can have the following values:
- NONE - (Default) AutoImport is off. Amazon FSx only updates file and directory listings from the linked S3 bucket when the file system is created. FSx does not update file and directory listings for any new or changed objects after choosing this option.
- NEW - AutoImport is on. Amazon FSx automatically imports directory listings of any new objects added to the linked S3 bucket that do not currently exist in the FSx file system.
- NEW_CHANGED - AutoImport is on. Amazon FSx automatically imports file and directory listings of any new objects added to the S3 bucket and any existing objects that are changed in the S3 bucket after you choose this option.
For more information, see Automatically import updates from your S3 bucket .
PerUnitStorageThroughput (integer) --

Required for the PERSISTENT_1 deployment type, describes the amount of read and write throughput for each 1 tebibyte of storage, in MB/s/TiB. File system throughput capacity is calculated by multiplying ﬁle system storage capacity (TiB) by the PerUnitStorageThroughput (MB/s/TiB). For a 2.4 TiB ﬁle system, provisioning 50 MB/s/TiB of PerUnitStorageThroughput yields 120 MB/s of ﬁle system throughput. You pay for the amount of throughput that you provision.

Valid values for SSD storage: 50, 100, 200. Valid values for HDD storage: 12, 40.
DailyAutomaticBackupStartTime (string) --

A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
AutomaticBackupRetentionDays (integer) --

The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.
CopyTagsToBackups (boolean) --

(Optional) Not available to use with file systems that are linked to a data repository. A boolean flag indicating whether tags for the file system should be copied to backups. The default value is false. If it's set to true, all file system tags are copied to all automatic and user-initiated backups when the user doesn't specify any backup-specific tags. If this value is true, and you specify one or more backup tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.

For more information, see Working with backups .
DriveCacheType (string) --

The type of drive cache used by PERSISTENT_1 file systems that are provisioned with HDD storage devices. This parameter is required when storage type is HDD. Set to READ , improve the performance for frequently accessed files and allows 20% of the total storage capacity of the file system to be cached.

This parameter is required when StorageType is set to HDD.

type StorageType

string

param StorageType

Sets the storage type for the Windows file system you're creating from a backup. Valid values are SSD and HDD .

Set to SSD to use solid state drive storage. Supported on all Windows deployment types.
Set to HDD to use hard disk drive storage. Supported on SINGLE_AZ_2 and MULTI_AZ_1 Windows file system deployment types.

Default value is SSD .

Note

HDD and SSD storage types have different minimum storage capacity requirements. A restored file system's storage capacity is tied to the file system that was backed up. You can create a file system that uses HDD storage from a backup of a file system that used SSD storage only if the original SSD file system had a storage capacity of at least 2000 GiB.

rtype

dict

returns

Response Syntax

{
    'FileSystem': {
        'OwnerId': 'string',
        'CreationTime': datetime(2015, 1, 1),
        'FileSystemId': 'string',
        'FileSystemType': 'WINDOWS'|'LUSTRE',
        'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING'|'MISCONFIGURED'|'UPDATING',
        'FailureDetails': {
            'Message': 'string'
        },
        'StorageCapacity': 123,
        'StorageType': 'SSD'|'HDD',
        'VpcId': 'string',
        'SubnetIds': [
            'string',
        ],
        'NetworkInterfaceIds': [
            'string',
        ],
        'DNSName': 'string',
        'KmsKeyId': 'string',
        'ResourceARN': 'string',
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'WindowsConfiguration': {
            'ActiveDirectoryId': 'string',
            'SelfManagedActiveDirectoryConfiguration': {
                'DomainName': 'string',
                'OrganizationalUnitDistinguishedName': 'string',
                'FileSystemAdministratorsGroup': 'string',
                'UserName': 'string',
                'DnsIps': [
                    'string',
                ]
            },
            'DeploymentType': 'MULTI_AZ_1'|'SINGLE_AZ_1'|'SINGLE_AZ_2',
            'RemoteAdministrationEndpoint': 'string',
            'PreferredSubnetId': 'string',
            'PreferredFileServerIp': 'string',
            'ThroughputCapacity': 123,
            'MaintenanceOperationsInProgress': [
                'PATCHING'|'BACKING_UP',
            ],
            'WeeklyMaintenanceStartTime': 'string',
            'DailyAutomaticBackupStartTime': 'string',
            'AutomaticBackupRetentionDays': 123,
            'CopyTagsToBackups': True|False,
            'Aliases': [
                {
                    'Name': 'string',
                    'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETING'|'CREATE_FAILED'|'DELETE_FAILED'
                },
            ]
        },
        'LustreConfiguration': {
            'WeeklyMaintenanceStartTime': 'string',
            'DataRepositoryConfiguration': {
                'Lifecycle': 'CREATING'|'AVAILABLE'|'MISCONFIGURED'|'UPDATING'|'DELETING',
                'ImportPath': 'string',
                'ExportPath': 'string',
                'ImportedFileChunkSize': 123,
                'AutoImportPolicy': 'NONE'|'NEW'|'NEW_CHANGED',
                'FailureDetails': {
                    'Message': 'string'
                }
            },
            'DeploymentType': 'SCRATCH_1'|'SCRATCH_2'|'PERSISTENT_1',
            'PerUnitStorageThroughput': 123,
            'MountName': 'string',
            'DailyAutomaticBackupStartTime': 'string',
            'AutomaticBackupRetentionDays': 123,
            'CopyTagsToBackups': True|False,
            'DriveCacheType': 'NONE'|'READ'
        },
        'AdministrativeActions': [
            {
                'AdministrativeActionType': 'FILE_SYSTEM_UPDATE'|'STORAGE_OPTIMIZATION'|'FILE_SYSTEM_ALIAS_ASSOCIATION'|'FILE_SYSTEM_ALIAS_DISASSOCIATION',
                'ProgressPercent': 123,
                'RequestTime': datetime(2015, 1, 1),
                'Status': 'FAILED'|'IN_PROGRESS'|'PENDING'|'COMPLETED'|'UPDATED_OPTIMIZING',
                'TargetFileSystemValues': {'... recursive ...'},
                'FailureDetails': {
                    'Message': 'string'
                }
            },
        ]
    }
}

Response Structure

(dict) --

The response object for the CreateFileSystemFromBackup operation.
- FileSystem (dict) --
  
  A description of the file system.
  - OwnerId (string) --
    
    The AWS account that created the file system. If the file system was created by an AWS Identity and Access Management (IAM) user, the AWS account to which the IAM user belongs is the owner.
  - CreationTime (datetime) --
    
    The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.
  - FileSystemId (string) --
    
    The system-generated, unique 17-digit ID of the file system.
  - FileSystemType (string) --
    
    The type of Amazon FSx file system, either LUSTRE or WINDOWS .
  - Lifecycle (string) --
    
    The lifecycle status of the file system, following are the possible values and what they mean:
    - AVAILABLE - The file system is in a healthy state, and is reachable and available for use.
    - CREATING - Amazon FSx is creating the new file system.
    - DELETING - Amazon FSx is deleting an existing file system.
    - FAILED - An existing file system has experienced an unrecoverable failure. When creating a new file system, Amazon FSx was unable to create the file system.
    - MISCONFIGURED indicates that the file system is in a failed but recoverable state.
    - UPDATING indicates that the file system is undergoing a customer initiated update.
  - FailureDetails (dict) --
    
    A structure providing details of any failures that occur when creating the file system has failed.
    - Message (string) --
      
      A message describing any failures that occurred during file system creation.
  - StorageCapacity (integer) --
    
    The storage capacity of the file system in gigabytes (GB).
  - StorageType (string) --
    
    The storage type of the file system. Valid values are SSD and HDD . If set to SSD , the file system uses solid state drive storage. If set to HDD , the file system uses hard disk drive storage.
  - VpcId (string) --
    
    The ID of the primary VPC for the file system.
  - SubnetIds (list) --
    
    Specifies the IDs of the subnets that the file system is accessible from. For Windows MULTI_AZ_1 file system deployment type, there are two subnet IDs, one for the preferred file server and one for the standby file server. The preferred file server subnet identified in the PreferredSubnetID property. All other file systems have only one subnet ID.
    
    For Lustre file systems, and Single-AZ Windows file systems, this is the ID of the subnet that contains the endpoint for the file system. For MULTI_AZ_1 Windows file systems, the endpoint for the file system is available in the PreferredSubnetID .
    - (string) --
      
      The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.
  - NetworkInterfaceIds (list) --
    
    The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.
    
    For an Amazon FSx for Windows File Server file system, you can have one network interface ID. For an Amazon FSx for Lustre file system, you can have more than one.
    - (string) --
      
      An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .
  - DNSName (string) --
    
    The DNS name for the file system.
  - KmsKeyId (string) --
    
    The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for Amazon FSx for Windows File Server file systems and persistent Amazon FSx for Lustre file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The scratch Amazon FSx for Lustre file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .
  - ResourceARN (string) --
    
    The Amazon Resource Name (ARN) for the file system resource.
  - Tags (list) --
    
    The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .
    - (dict) --
      
      Specifies a key-value pair for a resource tag.
      - Key (string) --
        
        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
      - Value (string) --
        
        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .
  - WindowsConfiguration (dict) --
    
    The configuration for this Microsoft Windows file system.
    - ActiveDirectoryId (string) --
      
      The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.
    - SelfManagedActiveDirectoryConfiguration (dict) --
      
      The configuration of the self-managed Microsoft Active Directory (AD) directory to which the Windows File Server instance is joined.
      - DomainName (string) --
        
        The fully qualified domain name of the self-managed AD directory.
      - OrganizationalUnitDistinguishedName (string) --
        
        The fully qualified distinguished name of the organizational unit within the self-managed AD directory to which the Windows File Server instance is joined.
      - FileSystemAdministratorsGroup (string) --
        
        The name of the domain group whose members have administrative privileges for the FSx file system.
      - UserName (string) --
        
        The user name for the service account on your self-managed AD domain that FSx uses to join to your AD domain.
      - DnsIps (list) --
        
        A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory.
        
        (string) --
    - DeploymentType (string) --
      
      Specifies the file system deployment type, valid values are the following:
      - MULTI_AZ_1 - Specifies a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability, and supports SSD and HDD storage.
      - SINGLE_AZ_1 - (Default) Specifies a file system that is configured for single AZ redundancy, only supports SSD storage.
      - SINGLE_AZ_2 - Latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports SSD and HDD storage.
      For more information, see Single-AZ and Multi-AZ File Systems .
    - RemoteAdministrationEndpoint (string) --
      
      For MULTI_AZ_1 deployment types, use this endpoint when performing administrative tasks on the file system using Amazon FSx Remote PowerShell.
      
      For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this is the DNS name of the file system.
      
      This endpoint is temporarily unavailable when the file system is undergoing maintenance.
    - PreferredSubnetId (string) --
      
      For MULTI_AZ_1 deployment types, it specifies the ID of the subnet where the preferred file server is located. Must be one of the two subnet IDs specified in SubnetIds property. Amazon FSx serves traffic from this subnet except in the event of a failover to the secondary file server.
      
      For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this value is the same as that for SubnetIDs . For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems
    - PreferredFileServerIp (string) --
      
      For MULTI_AZ_1 deployment types, the IP address of the primary, or preferred, file server.
      
      Use this IP address when mounting the file system on Linux SMB clients or Windows SMB clients that are not joined to a Microsoft Active Directory. Applicable for all Windows file system deployment types. This IP address is temporarily unavailable when the file system is undergoing maintenance. For Linux and Windows SMB clients that are joined to an Active Directory, use the file system's DNSName instead. For more information on mapping and mounting file shares, see Accessing File Shares .
    - ThroughputCapacity (integer) --
      
      The throughput of an Amazon FSx file system, measured in megabytes per second.
    - MaintenanceOperationsInProgress (list) --
      
      The list of maintenance operations in progress for this file system.
      - (string) --
        
        An enumeration specifying the currently ongoing maintenance operation.
    - WeeklyMaintenanceStartTime (string) --
      
      The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
    - DailyAutomaticBackupStartTime (string) --
      
      The preferred time to take daily automatic backups, in the UTC time zone.
    - AutomaticBackupRetentionDays (integer) --
      
      The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days.
    - CopyTagsToBackups (boolean) --
      
      A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.
    - Aliases (list) --
      
      An array of one or more DNS aliases that are currently associated with the Amazon FSx file system. Aliases allow you to use existing DNS names to access the data in your Amazon FSx file system. You can associate up to 50 aliases with a file system at any time. You can associate additional DNS aliases after you create the file system using the AssociateFileSystemAliases operation. You can remove DNS aliases from the file system after it is created using the DisassociateFileSystemAliases operation. You only need to specify the alias name in the request payload. For more information, see DNS aliases .
      - (dict) --
        
        A DNS alias that is associated with the file system. You can use a DNS alias to access a file system using user-defined DNS names, in addition to the default DNS name that Amazon FSx assigns to the file system. For more information, see DNS aliases in the FSx for Windows File Server User Guide .
        
        Name (string) --
        
        The name of the DNS alias. The alias name has to meet the following requirements:
        
        Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
        
        Can contain alphanumeric characters and the hyphen (-).
        
        Cannot start or end with a hyphen.
        
        Can start with a numeric.
        
        For DNS names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
        
        Lifecycle (string) --
        
        Describes the state of the DNS alias.
        
        AVAILABLE - The DNS alias is associated with an Amazon FSx file system.
        
        CREATING - Amazon FSx is creating the DNS alias and associating it with the file system.
        
        CREATE_FAILED - Amazon FSx was unable to associate the DNS alias with the file system.
        
        DELETING - Amazon FSx is disassociating the DNS alias from the file system and deleting it.
        
        DELETE_FAILED - Amazon FSx was unable to disassocate the DNS alias from the file system.
  - LustreConfiguration (dict) --
    
    The configuration for the Amazon FSx for Lustre file system.
    - WeeklyMaintenanceStartTime (string) --
      
      The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
    - DataRepositoryConfiguration (dict) --
      
      The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.
      - Lifecycle (string) --
        
        Describes the state of the file system's S3 durable data repository, if it is configured with an S3 repository. The lifecycle can have the following values:
        
        CREATING - The data repository configuration between the FSx file system and the linked S3 data repository is being created. The data repository is unavailable.
        
        AVAILABLE - The data repository is available for use.
        
        MISCONFIGURED - Amazon FSx cannot automatically import updates from the S3 bucket until the data repository configuration is corrected. For more information, see Troubleshooting a Misconfigured linked S3 bucket .
        
        UPDATING - The data repository is undergoing a customer initiated update and availability may be impacted.
      - ImportPath (string) --
        
        The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.
      - ExportPath (string) --
        
        The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.
      - ImportedFileChunkSize (integer) --
        
        For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.
        
        The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.
      - AutoImportPolicy (string) --
        
        Describes the file system's linked S3 data repository's AutoImportPolicy . The AutoImportPolicy configures how Amazon FSx keeps your file and directory listings up to date as you add or modify objects in your linked S3 bucket. AutoImportPolicy can have the following values:
        
        NONE - (Default) AutoImport is off. Amazon FSx only updates file and directory listings from the linked S3 bucket when the file system is created. FSx does not update file and directory listings for any new or changed objects after choosing this option.
        
        NEW - AutoImport is on. Amazon FSx automatically imports directory listings of any new objects added to the linked S3 bucket that do not currently exist in the FSx file system.
        
        NEW_CHANGED - AutoImport is on. Amazon FSx automatically imports file and directory listings of any new objects added to the S3 bucket and any existing objects that are changed in the S3 bucket after you choose this option.
        
        For more information, see Automatically import updates from your S3 bucket .
      - FailureDetails (dict) --
        
        Provides detailed information about the data respository if its Lifecycle is set to MISCONFIGURED .
        
        Message (string) --
        
        A detailed error message.
    - DeploymentType (string) --
      
      The deployment type of the FSX for Lustre file system. Scratch deployment type is designed for temporary storage and shorter-term processing of data.
      
      SCRATCH_1 and SCRATCH_2 deployment types are best suited for when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .
      
      The PERSISTENT_1 deployment type is used for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options . (Default = SCRATCH_1 )
    - PerUnitStorageThroughput (integer) --
      
      Per unit storage throughput represents the megabytes per second of read or write throughput per 1 tebibyte of storage provisioned. File system throughput capacity is equal to Storage capacity (TiB) * PerUnitStorageThroughput (MB/s/TiB). This option is only valid for PERSISTENT_1 deployment types.
      
      Valid values for SSD storage: 50, 100, 200. Valid values for HDD storage: 12, 40.
    - MountName (string) --
      
      You use the MountName value when mounting the file system.
      
      For the SCRATCH_1 deployment type, this value is always "fsx ". For SCRATCH_2 and PERSISTENT_1 deployment types, this value is a string that is unique within an AWS Region.
    - DailyAutomaticBackupStartTime (string) --
      
      A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
    - AutomaticBackupRetentionDays (integer) --
      
      The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.
    - CopyTagsToBackups (boolean) --
      
      A boolean flag indicating whether tags on the file system should be copied to backups. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value. (Default = false)
    - DriveCacheType (string) --
      
      The type of drive cache used by PERSISTENT_1 file systems that are provisioned with HDD storage devices. This parameter is required when storage type is HDD. Set to READ , improve the performance for frequently accessed files and allows 20% of the total storage capacity of the file system to be cached.
      
      This parameter is required when StorageType is set to HDD.
  - AdministrativeActions (list) --
    
    A list of administrative actions for the file system that are in process or waiting to be processed. Administrative actions describe changes to the Windows file system that you have initiated using the UpdateFileSystem action.
    - (dict) --
      
      Describes a specific Amazon FSx Administrative Action for the current Windows file system.
      - AdministrativeActionType (string) --
        
        Describes the type of administrative action, as follows:
        
        FILE_SYSTEM_UPDATE - A file system update administrative action initiated by the user from the Amazon FSx console, API (UpdateFileSystem), or CLI (update-file-system).
        
        STORAGE_OPTIMIZATION - Once the FILE_SYSTEM_UPDATE task to increase a file system's storage capacity completes successfully, a STORAGE_OPTIMIZATION task starts. Storage optimization is the process of migrating the file system data to the new, larger disks. You can track the storage migration progress using the ProgressPercent property. When STORAGE_OPTIMIZATION completes successfully, the parent FILE_SYSTEM_UPDATE action status changes to COMPLETED . For more information, see Managing Storage Capacity .
        
        FILE_SYSTEM_ALIAS_ASSOCIATION - A file system update to associate a new DNS alias with the file system. For more information, see .
        
        FILE_SYSTEM_ALIAS_DISASSOCIATION - A file system update to disassociate a DNS alias from the file system. For more information, see .
      - ProgressPercent (integer) --
        
        Provides the percent complete of a STORAGE_OPTIMIZATION administrative action. Does not apply to any other administrative action type.
      - RequestTime (datetime) --
        
        Time that the administrative action request was received.
      - Status (string) --
        
        Describes the status of the administrative action, as follows:
        
        FAILED - Amazon FSx failed to process the administrative action successfully.
        
        IN_PROGRESS - Amazon FSx is processing the administrative action.
        
        PENDING - Amazon FSx is waiting to process the administrative action.
        
        COMPLETED - Amazon FSx has finished processing the administrative task.
        
        UPDATED_OPTIMIZING - For a storage capacity increase update, Amazon FSx has updated the file system with the new storage capacity, and is now performing the storage optimization process. For more information, see Managing Storage Capacity .
      - TargetFileSystemValues (dict) --
        
        Describes the target value for the administration action, provided in the UpdateFileSystem operation. Returned for FILE_SYSTEM_UPDATE administrative actions.
      - FailureDetails (dict) --
        
        Provides information about a failed administrative action.
        
        Message (string) --
        
        Error message providing details about the failed administrative action.

DescribeBackups (updated)

Link ¶
Changes (response)

{'Backups': {'FileSystem': {'AdministrativeActions': {'AdministrativeActionType': {'FILE_SYSTEM_ALIAS_ASSOCIATION',
                                                                                   'FILE_SYSTEM_ALIAS_DISASSOCIATION'}},
                            'WindowsConfiguration': {'Aliases': [{'Lifecycle': 'AVAILABLE '
                                                                               '| '
                                                                               'CREATING '
                                                                               '| '
                                                                               'DELETING '
                                                                               '| '
                                                                               'CREATE_FAILED '
                                                                               '| '
                                                                               'DELETE_FAILED',
                                                                  'Name': 'string'}]}},
             'Type': {'AWS_BACKUP'}}}

Returns the description of specific Amazon FSx backups, if a BackupIds value is provided for that backup. Otherwise, it returns all backups owned by your AWS account in the AWS Region of the endpoint that you're calling.

When retrieving all backups, you can optionally specify the MaxResults parameter to limit the number of backups in a response. If more backups remain, Amazon FSx returns a NextToken value in the response. In this case, send a later request with the NextToken request parameter set to the value of NextToken from the last response.

This action is used in an iterative process to retrieve a list of your backups. DescribeBackups is called first without a NextToken value. Then the action continues to be called with the NextToken parameter set to the value of the last NextToken value until a response has no NextToken .

When using this action, keep the following in mind:

The implementation might return fewer than MaxResults file system descriptions while still including a NextToken value.
The order of backups returned in the response of one DescribeBackups call and the order of backups returned across the responses of a multi-call iteration is unspecified.

See also: AWS API Documentation

Request Syntax

client.describe_backups(
    BackupIds=[
        'string',
    ],
    Filters=[
        {
            'Name': 'file-system-id'|'backup-type'|'file-system-type',
            'Values': [
                'string',
            ]
        },
    ],
    MaxResults=123,
    NextToken='string'
)

type BackupIds

list

param BackupIds

IDs of the backups you want to retrieve (String). This overrides any filters. If any IDs are not found, BackupNotFound will be thrown.

(string) --

The ID of the backup. Specifies the backup to use if you're creating a file system from an existing backup.

type Filters

list

param Filters

Filters structure. Supported names are file-system-id and backup-type.

(dict) --

A filter used to restrict the results of describe calls. You can use multiple filters to return results that meet all applied filter requirements.
- Name (string) --
  
  The name for this filter.
- Values (list) --
  
  The values of the filter. These are all the values for any of the applied filters.
  - (string) --
    
    The value for a filter.

type MaxResults

integer

param MaxResults

Maximum number of backups to return in the response (integer). This parameter value must be greater than 0. The number of items that Amazon FSx returns is the minimum of the MaxResults parameter specified in the request and the service's internal maximum number of items per page.

type NextToken

string

param NextToken

Opaque pagination token returned from a previous DescribeBackups operation (String). If a token present, the action continues the list from where the returning call left off.

rtype

dict

returns

Response Syntax

{
    'Backups': [
        {
            'BackupId': 'string',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'TRANSFERRING'|'DELETED'|'FAILED',
            'FailureDetails': {
                'Message': 'string'
            },
            'Type': 'AUTOMATIC'|'USER_INITIATED'|'AWS_BACKUP',
            'ProgressPercent': 123,
            'CreationTime': datetime(2015, 1, 1),
            'KmsKeyId': 'string',
            'ResourceARN': 'string',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ],
            'FileSystem': {
                'OwnerId': 'string',
                'CreationTime': datetime(2015, 1, 1),
                'FileSystemId': 'string',
                'FileSystemType': 'WINDOWS'|'LUSTRE',
                'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING'|'MISCONFIGURED'|'UPDATING',
                'FailureDetails': {
                    'Message': 'string'
                },
                'StorageCapacity': 123,
                'StorageType': 'SSD'|'HDD',
                'VpcId': 'string',
                'SubnetIds': [
                    'string',
                ],
                'NetworkInterfaceIds': [
                    'string',
                ],
                'DNSName': 'string',
                'KmsKeyId': 'string',
                'ResourceARN': 'string',
                'Tags': [
                    {
                        'Key': 'string',
                        'Value': 'string'
                    },
                ],
                'WindowsConfiguration': {
                    'ActiveDirectoryId': 'string',
                    'SelfManagedActiveDirectoryConfiguration': {
                        'DomainName': 'string',
                        'OrganizationalUnitDistinguishedName': 'string',
                        'FileSystemAdministratorsGroup': 'string',
                        'UserName': 'string',
                        'DnsIps': [
                            'string',
                        ]
                    },
                    'DeploymentType': 'MULTI_AZ_1'|'SINGLE_AZ_1'|'SINGLE_AZ_2',
                    'RemoteAdministrationEndpoint': 'string',
                    'PreferredSubnetId': 'string',
                    'PreferredFileServerIp': 'string',
                    'ThroughputCapacity': 123,
                    'MaintenanceOperationsInProgress': [
                        'PATCHING'|'BACKING_UP',
                    ],
                    'WeeklyMaintenanceStartTime': 'string',
                    'DailyAutomaticBackupStartTime': 'string',
                    'AutomaticBackupRetentionDays': 123,
                    'CopyTagsToBackups': True|False,
                    'Aliases': [
                        {
                            'Name': 'string',
                            'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETING'|'CREATE_FAILED'|'DELETE_FAILED'
                        },
                    ]
                },
                'LustreConfiguration': {
                    'WeeklyMaintenanceStartTime': 'string',
                    'DataRepositoryConfiguration': {
                        'Lifecycle': 'CREATING'|'AVAILABLE'|'MISCONFIGURED'|'UPDATING'|'DELETING',
                        'ImportPath': 'string',
                        'ExportPath': 'string',
                        'ImportedFileChunkSize': 123,
                        'AutoImportPolicy': 'NONE'|'NEW'|'NEW_CHANGED',
                        'FailureDetails': {
                            'Message': 'string'
                        }
                    },
                    'DeploymentType': 'SCRATCH_1'|'SCRATCH_2'|'PERSISTENT_1',
                    'PerUnitStorageThroughput': 123,
                    'MountName': 'string',
                    'DailyAutomaticBackupStartTime': 'string',
                    'AutomaticBackupRetentionDays': 123,
                    'CopyTagsToBackups': True|False,
                    'DriveCacheType': 'NONE'|'READ'
                },
                'AdministrativeActions': [
                    {
                        'AdministrativeActionType': 'FILE_SYSTEM_UPDATE'|'STORAGE_OPTIMIZATION'|'FILE_SYSTEM_ALIAS_ASSOCIATION'|'FILE_SYSTEM_ALIAS_DISASSOCIATION',
                        'ProgressPercent': 123,
                        'RequestTime': datetime(2015, 1, 1),
                        'Status': 'FAILED'|'IN_PROGRESS'|'PENDING'|'COMPLETED'|'UPDATED_OPTIMIZING',
                        'TargetFileSystemValues': {'... recursive ...'},
                        'FailureDetails': {
                            'Message': 'string'
                        }
                    },
                ]
            },
            'DirectoryInformation': {
                'DomainName': 'string',
                'ActiveDirectoryId': 'string'
            }
        },
    ],
    'NextToken': 'string'
}

Response Structure

(dict) --

Response object for DescribeBackups operation.
- Backups (list) --
  
  Any array of backups.
  - (dict) --
    
    A backup of an Amazon FSx for file system.
    - BackupId (string) --
      
      The ID of the backup.
    - Lifecycle (string) --
      
      The lifecycle status of the backup.
      - AVAILABLE - The backup is fully available.
      - CREATING - FSx is creating the backup.
      - TRANSFERRING - For Lustre file systems only; FSx is transferring the backup to S3.
      - DELETED - The backup was deleted is no longer available.
      - FAILED - Amazon FSx could not complete the backup.
    - FailureDetails (dict) --
      
      Details explaining any failures that occur when creating a backup.
      - Message (string) --
        
        A message describing the backup creation failure.
    - Type (string) --
      
      The type of the file system backup.
    - ProgressPercent (integer) --
      
      The current percent of progress of an asynchronous task.
    - CreationTime (datetime) --
      
      The time when a particular backup was created.
    - KmsKeyId (string) --
      
      The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the backup of the Amazon FSx file system's data at rest.
    - ResourceARN (string) --
      
      The Amazon Resource Name (ARN) for the backup resource.
    - Tags (list) --
      
      Tags associated with a particular file system.
      - (dict) --
        
        Specifies a key-value pair for a resource tag.
        
        Key (string) --
        
        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
        
        Value (string) --
        
        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .
    - FileSystem (dict) --
      
      Metadata of the file system associated with the backup. This metadata is persisted even if the file system is deleted.
      - OwnerId (string) --
        
        The AWS account that created the file system. If the file system was created by an AWS Identity and Access Management (IAM) user, the AWS account to which the IAM user belongs is the owner.
      - CreationTime (datetime) --
        
        The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.
      - FileSystemId (string) --
        
        The system-generated, unique 17-digit ID of the file system.
      - FileSystemType (string) --
        
        The type of Amazon FSx file system, either LUSTRE or WINDOWS .
      - Lifecycle (string) --
        
        The lifecycle status of the file system, following are the possible values and what they mean:
        
        AVAILABLE - The file system is in a healthy state, and is reachable and available for use.
        
        CREATING - Amazon FSx is creating the new file system.
        
        DELETING - Amazon FSx is deleting an existing file system.
        
        FAILED - An existing file system has experienced an unrecoverable failure. When creating a new file system, Amazon FSx was unable to create the file system.
        
        MISCONFIGURED indicates that the file system is in a failed but recoverable state.
        
        UPDATING indicates that the file system is undergoing a customer initiated update.
      - FailureDetails (dict) --
        
        A structure providing details of any failures that occur when creating the file system has failed.
        
        Message (string) --
        
        A message describing any failures that occurred during file system creation.
      - StorageCapacity (integer) --
        
        The storage capacity of the file system in gigabytes (GB).
      - StorageType (string) --
        
        The storage type of the file system. Valid values are SSD and HDD . If set to SSD , the file system uses solid state drive storage. If set to HDD , the file system uses hard disk drive storage.
      - VpcId (string) --
        
        The ID of the primary VPC for the file system.
      - SubnetIds (list) --
        
        Specifies the IDs of the subnets that the file system is accessible from. For Windows MULTI_AZ_1 file system deployment type, there are two subnet IDs, one for the preferred file server and one for the standby file server. The preferred file server subnet identified in the PreferredSubnetID property. All other file systems have only one subnet ID.
        
        For Lustre file systems, and Single-AZ Windows file systems, this is the ID of the subnet that contains the endpoint for the file system. For MULTI_AZ_1 Windows file systems, the endpoint for the file system is available in the PreferredSubnetID .
        
        (string) --
        
        The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.
      - NetworkInterfaceIds (list) --
        
        The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.
        
        For an Amazon FSx for Windows File Server file system, you can have one network interface ID. For an Amazon FSx for Lustre file system, you can have more than one.
        
        (string) --
        
        An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .
      - DNSName (string) --
        
        The DNS name for the file system.
      - KmsKeyId (string) --
        
        The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for Amazon FSx for Windows File Server file systems and persistent Amazon FSx for Lustre file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The scratch Amazon FSx for Lustre file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .
      - ResourceARN (string) --
        
        The Amazon Resource Name (ARN) for the file system resource.
      - Tags (list) --
        
        The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .
        
        (dict) --
        
        Specifies a key-value pair for a resource tag.
        
        Key (string) --
        
        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
        
        Value (string) --
        
        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .
      - WindowsConfiguration (dict) --
        
        The configuration for this Microsoft Windows file system.
        
        ActiveDirectoryId (string) --
        
        The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.
        
        SelfManagedActiveDirectoryConfiguration (dict) --
        
        The configuration of the self-managed Microsoft Active Directory (AD) directory to which the Windows File Server instance is joined.
        
        DomainName (string) --
        
        The fully qualified domain name of the self-managed AD directory.
        
        OrganizationalUnitDistinguishedName (string) --
        
        The fully qualified distinguished name of the organizational unit within the self-managed AD directory to which the Windows File Server instance is joined.
        
        FileSystemAdministratorsGroup (string) --
        
        The name of the domain group whose members have administrative privileges for the FSx file system.
        
        UserName (string) --
        
        The user name for the service account on your self-managed AD domain that FSx uses to join to your AD domain.
        
        DnsIps (list) --
        
        A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory.
        
        (string) --
        
        DeploymentType (string) --
        
        Specifies the file system deployment type, valid values are the following:
        
        MULTI_AZ_1 - Specifies a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability, and supports SSD and HDD storage.
        
        SINGLE_AZ_1 - (Default) Specifies a file system that is configured for single AZ redundancy, only supports SSD storage.
        
        SINGLE_AZ_2 - Latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports SSD and HDD storage.
        
        For more information, see Single-AZ and Multi-AZ File Systems .
        
        RemoteAdministrationEndpoint (string) --
        
        For MULTI_AZ_1 deployment types, use this endpoint when performing administrative tasks on the file system using Amazon FSx Remote PowerShell.
        
        For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this is the DNS name of the file system.
        
        This endpoint is temporarily unavailable when the file system is undergoing maintenance.
        
        PreferredSubnetId (string) --
        
        For MULTI_AZ_1 deployment types, it specifies the ID of the subnet where the preferred file server is located. Must be one of the two subnet IDs specified in SubnetIds property. Amazon FSx serves traffic from this subnet except in the event of a failover to the secondary file server.
        
        For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this value is the same as that for SubnetIDs . For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems
        
        PreferredFileServerIp (string) --
        
        For MULTI_AZ_1 deployment types, the IP address of the primary, or preferred, file server.
        
        Use this IP address when mounting the file system on Linux SMB clients or Windows SMB clients that are not joined to a Microsoft Active Directory. Applicable for all Windows file system deployment types. This IP address is temporarily unavailable when the file system is undergoing maintenance. For Linux and Windows SMB clients that are joined to an Active Directory, use the file system's DNSName instead. For more information on mapping and mounting file shares, see Accessing File Shares .
        
        ThroughputCapacity (integer) --
        
        The throughput of an Amazon FSx file system, measured in megabytes per second.
        
        MaintenanceOperationsInProgress (list) --
        
        The list of maintenance operations in progress for this file system.
        
        (string) --
        
        An enumeration specifying the currently ongoing maintenance operation.
        
        WeeklyMaintenanceStartTime (string) --
        
        The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
        
        DailyAutomaticBackupStartTime (string) --
        
        The preferred time to take daily automatic backups, in the UTC time zone.
        
        AutomaticBackupRetentionDays (integer) --
        
        The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days.
        
        CopyTagsToBackups (boolean) --
        
        A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.
        
        Aliases (list) --
        
        An array of one or more DNS aliases that are currently associated with the Amazon FSx file system. Aliases allow you to use existing DNS names to access the data in your Amazon FSx file system. You can associate up to 50 aliases with a file system at any time. You can associate additional DNS aliases after you create the file system using the AssociateFileSystemAliases operation. You can remove DNS aliases from the file system after it is created using the DisassociateFileSystemAliases operation. You only need to specify the alias name in the request payload. For more information, see DNS aliases .
        
        (dict) --
        
        A DNS alias that is associated with the file system. You can use a DNS alias to access a file system using user-defined DNS names, in addition to the default DNS name that Amazon FSx assigns to the file system. For more information, see DNS aliases in the FSx for Windows File Server User Guide .
        
        Name (string) --
        
        The name of the DNS alias. The alias name has to meet the following requirements:
        
        Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
        
        Can contain alphanumeric characters and the hyphen (-).
        
        Cannot start or end with a hyphen.
        
        Can start with a numeric.
        
        For DNS names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
        
        Lifecycle (string) --
        
        Describes the state of the DNS alias.
        
        AVAILABLE - The DNS alias is associated with an Amazon FSx file system.
        
        CREATING - Amazon FSx is creating the DNS alias and associating it with the file system.
        
        CREATE_FAILED - Amazon FSx was unable to associate the DNS alias with the file system.
        
        DELETING - Amazon FSx is disassociating the DNS alias from the file system and deleting it.
        
        DELETE_FAILED - Amazon FSx was unable to disassocate the DNS alias from the file system.
      - LustreConfiguration (dict) --
        
        The configuration for the Amazon FSx for Lustre file system.
        
        WeeklyMaintenanceStartTime (string) --
        
        The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
        
        DataRepositoryConfiguration (dict) --
        
        The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.
        
        Lifecycle (string) --
        
        Describes the state of the file system's S3 durable data repository, if it is configured with an S3 repository. The lifecycle can have the following values:
        
        CREATING - The data repository configuration between the FSx file system and the linked S3 data repository is being created. The data repository is unavailable.
        
        AVAILABLE - The data repository is available for use.
        
        MISCONFIGURED - Amazon FSx cannot automatically import updates from the S3 bucket until the data repository configuration is corrected. For more information, see Troubleshooting a Misconfigured linked S3 bucket .
        
        UPDATING - The data repository is undergoing a customer initiated update and availability may be impacted.
        
        ImportPath (string) --
        
        The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.
        
        ExportPath (string) --
        
        The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.
        
        ImportedFileChunkSize (integer) --
        
        For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.
        
        The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.
        
        AutoImportPolicy (string) --
        
        Describes the file system's linked S3 data repository's AutoImportPolicy . The AutoImportPolicy configures how Amazon FSx keeps your file and directory listings up to date as you add or modify objects in your linked S3 bucket. AutoImportPolicy can have the following values:
        
        NONE - (Default) AutoImport is off. Amazon FSx only updates file and directory listings from the linked S3 bucket when the file system is created. FSx does not update file and directory listings for any new or changed objects after choosing this option.
        
        NEW - AutoImport is on. Amazon FSx automatically imports directory listings of any new objects added to the linked S3 bucket that do not currently exist in the FSx file system.
        
        NEW_CHANGED - AutoImport is on. Amazon FSx automatically imports file and directory listings of any new objects added to the S3 bucket and any existing objects that are changed in the S3 bucket after you choose this option.
        
        For more information, see Automatically import updates from your S3 bucket .
        
        FailureDetails (dict) --
        
        Provides detailed information about the data respository if its Lifecycle is set to MISCONFIGURED .
        
        Message (string) --
        
        A detailed error message.
        
        DeploymentType (string) --
        
        The deployment type of the FSX for Lustre file system. Scratch deployment type is designed for temporary storage and shorter-term processing of data.
        
        SCRATCH_1 and SCRATCH_2 deployment types are best suited for when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .
        
        The PERSISTENT_1 deployment type is used for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options . (Default = SCRATCH_1 )
        
        PerUnitStorageThroughput (integer) --
        
        Per unit storage throughput represents the megabytes per second of read or write throughput per 1 tebibyte of storage provisioned. File system throughput capacity is equal to Storage capacity (TiB) * PerUnitStorageThroughput (MB/s/TiB). This option is only valid for PERSISTENT_1 deployment types.
        
        Valid values for SSD storage: 50, 100, 200. Valid values for HDD storage: 12, 40.
        
        MountName (string) --
        
        You use the MountName value when mounting the file system.
        
        For the SCRATCH_1 deployment type, this value is always "fsx ". For SCRATCH_2 and PERSISTENT_1 deployment types, this value is a string that is unique within an AWS Region.
        
        DailyAutomaticBackupStartTime (string) --
        
        A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
        
        AutomaticBackupRetentionDays (integer) --
        
        The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.
        
        CopyTagsToBackups (boolean) --
        
        A boolean flag indicating whether tags on the file system should be copied to backups. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value. (Default = false)
        
        DriveCacheType (string) --
        
        The type of drive cache used by PERSISTENT_1 file systems that are provisioned with HDD storage devices. This parameter is required when storage type is HDD. Set to READ , improve the performance for frequently accessed files and allows 20% of the total storage capacity of the file system to be cached.
        
        This parameter is required when StorageType is set to HDD.
      - AdministrativeActions (list) --
        
        A list of administrative actions for the file system that are in process or waiting to be processed. Administrative actions describe changes to the Windows file system that you have initiated using the UpdateFileSystem action.
        
        (dict) --
        
        Describes a specific Amazon FSx Administrative Action for the current Windows file system.
        
        AdministrativeActionType (string) --
        
        Describes the type of administrative action, as follows:
        
        FILE_SYSTEM_UPDATE - A file system update administrative action initiated by the user from the Amazon FSx console, API (UpdateFileSystem), or CLI (update-file-system).
        
        STORAGE_OPTIMIZATION - Once the FILE_SYSTEM_UPDATE task to increase a file system's storage capacity completes successfully, a STORAGE_OPTIMIZATION task starts. Storage optimization is the process of migrating the file system data to the new, larger disks. You can track the storage migration progress using the ProgressPercent property. When STORAGE_OPTIMIZATION completes successfully, the parent FILE_SYSTEM_UPDATE action status changes to COMPLETED . For more information, see Managing Storage Capacity .
        
        FILE_SYSTEM_ALIAS_ASSOCIATION - A file system update to associate a new DNS alias with the file system. For more information, see .
        
        FILE_SYSTEM_ALIAS_DISASSOCIATION - A file system update to disassociate a DNS alias from the file system. For more information, see .
        
        ProgressPercent (integer) --
        
        Provides the percent complete of a STORAGE_OPTIMIZATION administrative action. Does not apply to any other administrative action type.
        
        RequestTime (datetime) --
        
        Time that the administrative action request was received.
        
        Status (string) --
        
        Describes the status of the administrative action, as follows:
        
        FAILED - Amazon FSx failed to process the administrative action successfully.
        
        IN_PROGRESS - Amazon FSx is processing the administrative action.
        
        PENDING - Amazon FSx is waiting to process the administrative action.
        
        COMPLETED - Amazon FSx has finished processing the administrative task.
        
        UPDATED_OPTIMIZING - For a storage capacity increase update, Amazon FSx has updated the file system with the new storage capacity, and is now performing the storage optimization process. For more information, see Managing Storage Capacity .
        
        TargetFileSystemValues (dict) --
        
        Describes the target value for the administration action, provided in the UpdateFileSystem operation. Returned for FILE_SYSTEM_UPDATE administrative actions.
        
        FailureDetails (dict) --
        
        Provides information about a failed administrative action.
        
        Message (string) --
        
        Error message providing details about the failed administrative action.
    - DirectoryInformation (dict) --
      
      The configuration of the self-managed Microsoft Active Directory (AD) to which the Windows File Server instance is joined.
      - DomainName (string) --
        
        The fully qualified domain name of the self-managed AD directory.
      - ActiveDirectoryId (string) --
        
        The ID of the AWS Managed Microsoft Active Directory instance to which the file system is joined.
- NextToken (string) --
  
  This is present if there are more backups than returned in the response (String). You can use the NextToken value in the later request to fetch the backups.

DescribeFileSystems (updated)

Link ¶
Changes (response)

{'FileSystems': {'AdministrativeActions': {'AdministrativeActionType': {'FILE_SYSTEM_ALIAS_ASSOCIATION',
                                                                        'FILE_SYSTEM_ALIAS_DISASSOCIATION'}},
                 'WindowsConfiguration': {'Aliases': [{'Lifecycle': 'AVAILABLE '
                                                                    '| '
                                                                    'CREATING '
                                                                    '| '
                                                                    'DELETING '
                                                                    '| '
                                                                    'CREATE_FAILED '
                                                                    '| '
                                                                    'DELETE_FAILED',
                                                       'Name': 'string'}]}}}

Returns the description of specific Amazon FSx file systems, if a FileSystemIds value is provided for that file system. Otherwise, it returns descriptions of all file systems owned by your AWS account in the AWS Region of the endpoint that you're calling.

When retrieving all file system descriptions, you can optionally specify the MaxResults parameter to limit the number of descriptions in a response. If more file system descriptions remain, Amazon FSx returns a NextToken value in the response. In this case, send a later request with the NextToken request parameter set to the value of NextToken from the last response.

This action is used in an iterative process to retrieve a list of your file system descriptions. DescribeFileSystems is called first without a NextToken value. Then the action continues to be called with the NextToken parameter set to the value of the last NextToken value until a response has no NextToken .

When using this action, keep the following in mind:

The implementation might return fewer than MaxResults file system descriptions while still including a NextToken value.
The order of file systems returned in the response of one DescribeFileSystems call and the order of file systems returned across the responses of a multicall iteration is unspecified.

See also: AWS API Documentation

Request Syntax

client.describe_file_systems(
    FileSystemIds=[
        'string',
    ],
    MaxResults=123,
    NextToken='string'
)

type FileSystemIds

list

param FileSystemIds

IDs of the file systems whose descriptions you want to retrieve (String).

(string) --

The globally unique ID of the file system, assigned by Amazon FSx.

type MaxResults

integer

param MaxResults

Maximum number of file systems to return in the response (integer). This parameter value must be greater than 0. The number of items that Amazon FSx returns is the minimum of the MaxResults parameter specified in the request and the service's internal maximum number of items per page.

type NextToken

string

param NextToken

Opaque pagination token returned from a previous DescribeFileSystems operation (String). If a token present, the action continues the list from where the returning call left off.

rtype

dict

returns

Response Syntax

{
    'FileSystems': [
        {
            'OwnerId': 'string',
            'CreationTime': datetime(2015, 1, 1),
            'FileSystemId': 'string',
            'FileSystemType': 'WINDOWS'|'LUSTRE',
            'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING'|'MISCONFIGURED'|'UPDATING',
            'FailureDetails': {
                'Message': 'string'
            },
            'StorageCapacity': 123,
            'StorageType': 'SSD'|'HDD',
            'VpcId': 'string',
            'SubnetIds': [
                'string',
            ],
            'NetworkInterfaceIds': [
                'string',
            ],
            'DNSName': 'string',
            'KmsKeyId': 'string',
            'ResourceARN': 'string',
            'Tags': [
                {
                    'Key': 'string',
                    'Value': 'string'
                },
            ],
            'WindowsConfiguration': {
                'ActiveDirectoryId': 'string',
                'SelfManagedActiveDirectoryConfiguration': {
                    'DomainName': 'string',
                    'OrganizationalUnitDistinguishedName': 'string',
                    'FileSystemAdministratorsGroup': 'string',
                    'UserName': 'string',
                    'DnsIps': [
                        'string',
                    ]
                },
                'DeploymentType': 'MULTI_AZ_1'|'SINGLE_AZ_1'|'SINGLE_AZ_2',
                'RemoteAdministrationEndpoint': 'string',
                'PreferredSubnetId': 'string',
                'PreferredFileServerIp': 'string',
                'ThroughputCapacity': 123,
                'MaintenanceOperationsInProgress': [
                    'PATCHING'|'BACKING_UP',
                ],
                'WeeklyMaintenanceStartTime': 'string',
                'DailyAutomaticBackupStartTime': 'string',
                'AutomaticBackupRetentionDays': 123,
                'CopyTagsToBackups': True|False,
                'Aliases': [
                    {
                        'Name': 'string',
                        'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETING'|'CREATE_FAILED'|'DELETE_FAILED'
                    },
                ]
            },
            'LustreConfiguration': {
                'WeeklyMaintenanceStartTime': 'string',
                'DataRepositoryConfiguration': {
                    'Lifecycle': 'CREATING'|'AVAILABLE'|'MISCONFIGURED'|'UPDATING'|'DELETING',
                    'ImportPath': 'string',
                    'ExportPath': 'string',
                    'ImportedFileChunkSize': 123,
                    'AutoImportPolicy': 'NONE'|'NEW'|'NEW_CHANGED',
                    'FailureDetails': {
                        'Message': 'string'
                    }
                },
                'DeploymentType': 'SCRATCH_1'|'SCRATCH_2'|'PERSISTENT_1',
                'PerUnitStorageThroughput': 123,
                'MountName': 'string',
                'DailyAutomaticBackupStartTime': 'string',
                'AutomaticBackupRetentionDays': 123,
                'CopyTagsToBackups': True|False,
                'DriveCacheType': 'NONE'|'READ'
            },
            'AdministrativeActions': [
                {
                    'AdministrativeActionType': 'FILE_SYSTEM_UPDATE'|'STORAGE_OPTIMIZATION'|'FILE_SYSTEM_ALIAS_ASSOCIATION'|'FILE_SYSTEM_ALIAS_DISASSOCIATION',
                    'ProgressPercent': 123,
                    'RequestTime': datetime(2015, 1, 1),
                    'Status': 'FAILED'|'IN_PROGRESS'|'PENDING'|'COMPLETED'|'UPDATED_OPTIMIZING',
                    'TargetFileSystemValues': {'... recursive ...'},
                    'FailureDetails': {
                        'Message': 'string'
                    }
                },
            ]
        },
    ],
    'NextToken': 'string'
}

Response Structure

(dict) --

The response object for DescribeFileSystems operation.
- FileSystems (list) --
  
  An array of file system descriptions.
  - (dict) --
    
    A description of a specific Amazon FSx file system.
    - OwnerId (string) --
      
      The AWS account that created the file system. If the file system was created by an AWS Identity and Access Management (IAM) user, the AWS account to which the IAM user belongs is the owner.
    - CreationTime (datetime) --
      
      The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.
    - FileSystemId (string) --
      
      The system-generated, unique 17-digit ID of the file system.
    - FileSystemType (string) --
      
      The type of Amazon FSx file system, either LUSTRE or WINDOWS .
    - Lifecycle (string) --
      
      The lifecycle status of the file system, following are the possible values and what they mean:
      - AVAILABLE - The file system is in a healthy state, and is reachable and available for use.
      - CREATING - Amazon FSx is creating the new file system.
      - DELETING - Amazon FSx is deleting an existing file system.
      - FAILED - An existing file system has experienced an unrecoverable failure. When creating a new file system, Amazon FSx was unable to create the file system.
      - MISCONFIGURED indicates that the file system is in a failed but recoverable state.
      - UPDATING indicates that the file system is undergoing a customer initiated update.
    - FailureDetails (dict) --
      
      A structure providing details of any failures that occur when creating the file system has failed.
      - Message (string) --
        
        A message describing any failures that occurred during file system creation.
    - StorageCapacity (integer) --
      
      The storage capacity of the file system in gigabytes (GB).
    - StorageType (string) --
      
      The storage type of the file system. Valid values are SSD and HDD . If set to SSD , the file system uses solid state drive storage. If set to HDD , the file system uses hard disk drive storage.
    - VpcId (string) --
      
      The ID of the primary VPC for the file system.
    - SubnetIds (list) --
      
      Specifies the IDs of the subnets that the file system is accessible from. For Windows MULTI_AZ_1 file system deployment type, there are two subnet IDs, one for the preferred file server and one for the standby file server. The preferred file server subnet identified in the PreferredSubnetID property. All other file systems have only one subnet ID.
      
      For Lustre file systems, and Single-AZ Windows file systems, this is the ID of the subnet that contains the endpoint for the file system. For MULTI_AZ_1 Windows file systems, the endpoint for the file system is available in the PreferredSubnetID .
      - (string) --
        
        The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.
    - NetworkInterfaceIds (list) --
      
      The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.
      
      For an Amazon FSx for Windows File Server file system, you can have one network interface ID. For an Amazon FSx for Lustre file system, you can have more than one.
      - (string) --
        
        An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .
    - DNSName (string) --
      
      The DNS name for the file system.
    - KmsKeyId (string) --
      
      The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for Amazon FSx for Windows File Server file systems and persistent Amazon FSx for Lustre file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The scratch Amazon FSx for Lustre file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .
    - ResourceARN (string) --
      
      The Amazon Resource Name (ARN) for the file system resource.
    - Tags (list) --
      
      The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .
      - (dict) --
        
        Specifies a key-value pair for a resource tag.
        
        Key (string) --
        
        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
        
        Value (string) --
        
        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .
    - WindowsConfiguration (dict) --
      
      The configuration for this Microsoft Windows file system.
      - ActiveDirectoryId (string) --
        
        The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.
      - SelfManagedActiveDirectoryConfiguration (dict) --
        
        The configuration of the self-managed Microsoft Active Directory (AD) directory to which the Windows File Server instance is joined.
        
        DomainName (string) --
        
        The fully qualified domain name of the self-managed AD directory.
        
        OrganizationalUnitDistinguishedName (string) --
        
        The fully qualified distinguished name of the organizational unit within the self-managed AD directory to which the Windows File Server instance is joined.
        
        FileSystemAdministratorsGroup (string) --
        
        The name of the domain group whose members have administrative privileges for the FSx file system.
        
        UserName (string) --
        
        The user name for the service account on your self-managed AD domain that FSx uses to join to your AD domain.
        
        DnsIps (list) --
        
        A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory.
        
        (string) --
      - DeploymentType (string) --
        
        Specifies the file system deployment type, valid values are the following:
        
        MULTI_AZ_1 - Specifies a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability, and supports SSD and HDD storage.
        
        SINGLE_AZ_1 - (Default) Specifies a file system that is configured for single AZ redundancy, only supports SSD storage.
        
        SINGLE_AZ_2 - Latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports SSD and HDD storage.
        
        For more information, see Single-AZ and Multi-AZ File Systems .
      - RemoteAdministrationEndpoint (string) --
        
        For MULTI_AZ_1 deployment types, use this endpoint when performing administrative tasks on the file system using Amazon FSx Remote PowerShell.
        
        For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this is the DNS name of the file system.
        
        This endpoint is temporarily unavailable when the file system is undergoing maintenance.
      - PreferredSubnetId (string) --
        
        For MULTI_AZ_1 deployment types, it specifies the ID of the subnet where the preferred file server is located. Must be one of the two subnet IDs specified in SubnetIds property. Amazon FSx serves traffic from this subnet except in the event of a failover to the secondary file server.
        
        For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this value is the same as that for SubnetIDs . For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems
      - PreferredFileServerIp (string) --
        
        For MULTI_AZ_1 deployment types, the IP address of the primary, or preferred, file server.
        
        Use this IP address when mounting the file system on Linux SMB clients or Windows SMB clients that are not joined to a Microsoft Active Directory. Applicable for all Windows file system deployment types. This IP address is temporarily unavailable when the file system is undergoing maintenance. For Linux and Windows SMB clients that are joined to an Active Directory, use the file system's DNSName instead. For more information on mapping and mounting file shares, see Accessing File Shares .
      - ThroughputCapacity (integer) --
        
        The throughput of an Amazon FSx file system, measured in megabytes per second.
      - MaintenanceOperationsInProgress (list) --
        
        The list of maintenance operations in progress for this file system.
        
        (string) --
        
        An enumeration specifying the currently ongoing maintenance operation.
      - WeeklyMaintenanceStartTime (string) --
        
        The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
      - DailyAutomaticBackupStartTime (string) --
        
        The preferred time to take daily automatic backups, in the UTC time zone.
      - AutomaticBackupRetentionDays (integer) --
        
        The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days.
      - CopyTagsToBackups (boolean) --
        
        A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.
      - Aliases (list) --
        
        An array of one or more DNS aliases that are currently associated with the Amazon FSx file system. Aliases allow you to use existing DNS names to access the data in your Amazon FSx file system. You can associate up to 50 aliases with a file system at any time. You can associate additional DNS aliases after you create the file system using the AssociateFileSystemAliases operation. You can remove DNS aliases from the file system after it is created using the DisassociateFileSystemAliases operation. You only need to specify the alias name in the request payload. For more information, see DNS aliases .
        
        (dict) --
        
        A DNS alias that is associated with the file system. You can use a DNS alias to access a file system using user-defined DNS names, in addition to the default DNS name that Amazon FSx assigns to the file system. For more information, see DNS aliases in the FSx for Windows File Server User Guide .
        
        Name (string) --
        
        The name of the DNS alias. The alias name has to meet the following requirements:
        
        Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
        
        Can contain alphanumeric characters and the hyphen (-).
        
        Cannot start or end with a hyphen.
        
        Can start with a numeric.
        
        For DNS names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
        
        Lifecycle (string) --
        
        Describes the state of the DNS alias.
        
        AVAILABLE - The DNS alias is associated with an Amazon FSx file system.
        
        CREATING - Amazon FSx is creating the DNS alias and associating it with the file system.
        
        CREATE_FAILED - Amazon FSx was unable to associate the DNS alias with the file system.
        
        DELETING - Amazon FSx is disassociating the DNS alias from the file system and deleting it.
        
        DELETE_FAILED - Amazon FSx was unable to disassocate the DNS alias from the file system.
    - LustreConfiguration (dict) --
      
      The configuration for the Amazon FSx for Lustre file system.
      - WeeklyMaintenanceStartTime (string) --
        
        The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
      - DataRepositoryConfiguration (dict) --
        
        The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.
        
        Lifecycle (string) --
        
        Describes the state of the file system's S3 durable data repository, if it is configured with an S3 repository. The lifecycle can have the following values:
        
        CREATING - The data repository configuration between the FSx file system and the linked S3 data repository is being created. The data repository is unavailable.
        
        AVAILABLE - The data repository is available for use.
        
        MISCONFIGURED - Amazon FSx cannot automatically import updates from the S3 bucket until the data repository configuration is corrected. For more information, see Troubleshooting a Misconfigured linked S3 bucket .
        
        UPDATING - The data repository is undergoing a customer initiated update and availability may be impacted.
        
        ImportPath (string) --
        
        The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.
        
        ExportPath (string) --
        
        The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.
        
        ImportedFileChunkSize (integer) --
        
        For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.
        
        The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.
        
        AutoImportPolicy (string) --
        
        Describes the file system's linked S3 data repository's AutoImportPolicy . The AutoImportPolicy configures how Amazon FSx keeps your file and directory listings up to date as you add or modify objects in your linked S3 bucket. AutoImportPolicy can have the following values:
        
        NONE - (Default) AutoImport is off. Amazon FSx only updates file and directory listings from the linked S3 bucket when the file system is created. FSx does not update file and directory listings for any new or changed objects after choosing this option.
        
        NEW - AutoImport is on. Amazon FSx automatically imports directory listings of any new objects added to the linked S3 bucket that do not currently exist in the FSx file system.
        
        NEW_CHANGED - AutoImport is on. Amazon FSx automatically imports file and directory listings of any new objects added to the S3 bucket and any existing objects that are changed in the S3 bucket after you choose this option.
        
        For more information, see Automatically import updates from your S3 bucket .
        
        FailureDetails (dict) --
        
        Provides detailed information about the data respository if its Lifecycle is set to MISCONFIGURED .
        
        Message (string) --
        
        A detailed error message.
      - DeploymentType (string) --
        
        The deployment type of the FSX for Lustre file system. Scratch deployment type is designed for temporary storage and shorter-term processing of data.
        
        SCRATCH_1 and SCRATCH_2 deployment types are best suited for when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .
        
        The PERSISTENT_1 deployment type is used for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options . (Default = SCRATCH_1 )
      - PerUnitStorageThroughput (integer) --
        
        Per unit storage throughput represents the megabytes per second of read or write throughput per 1 tebibyte of storage provisioned. File system throughput capacity is equal to Storage capacity (TiB) * PerUnitStorageThroughput (MB/s/TiB). This option is only valid for PERSISTENT_1 deployment types.
        
        Valid values for SSD storage: 50, 100, 200. Valid values for HDD storage: 12, 40.
      - MountName (string) --
        
        You use the MountName value when mounting the file system.
        
        For the SCRATCH_1 deployment type, this value is always "fsx ". For SCRATCH_2 and PERSISTENT_1 deployment types, this value is a string that is unique within an AWS Region.
      - DailyAutomaticBackupStartTime (string) --
        
        A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
      - AutomaticBackupRetentionDays (integer) --
        
        The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.
      - CopyTagsToBackups (boolean) --
        
        A boolean flag indicating whether tags on the file system should be copied to backups. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value. (Default = false)
      - DriveCacheType (string) --
        
        The type of drive cache used by PERSISTENT_1 file systems that are provisioned with HDD storage devices. This parameter is required when storage type is HDD. Set to READ , improve the performance for frequently accessed files and allows 20% of the total storage capacity of the file system to be cached.
        
        This parameter is required when StorageType is set to HDD.
    - AdministrativeActions (list) --
      
      A list of administrative actions for the file system that are in process or waiting to be processed. Administrative actions describe changes to the Windows file system that you have initiated using the UpdateFileSystem action.
      - (dict) --
        
        Describes a specific Amazon FSx Administrative Action for the current Windows file system.
        
        AdministrativeActionType (string) --
        
        Describes the type of administrative action, as follows:
        
        FILE_SYSTEM_UPDATE - A file system update administrative action initiated by the user from the Amazon FSx console, API (UpdateFileSystem), or CLI (update-file-system).
        
        STORAGE_OPTIMIZATION - Once the FILE_SYSTEM_UPDATE task to increase a file system's storage capacity completes successfully, a STORAGE_OPTIMIZATION task starts. Storage optimization is the process of migrating the file system data to the new, larger disks. You can track the storage migration progress using the ProgressPercent property. When STORAGE_OPTIMIZATION completes successfully, the parent FILE_SYSTEM_UPDATE action status changes to COMPLETED . For more information, see Managing Storage Capacity .
        
        FILE_SYSTEM_ALIAS_ASSOCIATION - A file system update to associate a new DNS alias with the file system. For more information, see .
        
        FILE_SYSTEM_ALIAS_DISASSOCIATION - A file system update to disassociate a DNS alias from the file system. For more information, see .
        
        ProgressPercent (integer) --
        
        Provides the percent complete of a STORAGE_OPTIMIZATION administrative action. Does not apply to any other administrative action type.
        
        RequestTime (datetime) --
        
        Time that the administrative action request was received.
        
        Status (string) --
        
        Describes the status of the administrative action, as follows:
        
        FAILED - Amazon FSx failed to process the administrative action successfully.
        
        IN_PROGRESS - Amazon FSx is processing the administrative action.
        
        PENDING - Amazon FSx is waiting to process the administrative action.
        
        COMPLETED - Amazon FSx has finished processing the administrative task.
        
        UPDATED_OPTIMIZING - For a storage capacity increase update, Amazon FSx has updated the file system with the new storage capacity, and is now performing the storage optimization process. For more information, see Managing Storage Capacity .
        
        TargetFileSystemValues (dict) --
        
        Describes the target value for the administration action, provided in the UpdateFileSystem operation. Returned for FILE_SYSTEM_UPDATE administrative actions.
        
        FailureDetails (dict) --
        
        Provides information about a failed administrative action.
        
        Message (string) --
        
        Error message providing details about the failed administrative action.
- NextToken (string) --
  
  Present if there are more file systems than returned in the response (String). You can use the NextToken value in the later request to fetch the descriptions.

UpdateFileSystem (updated)

Link ¶
Changes (response)

{'FileSystem': {'AdministrativeActions': {'AdministrativeActionType': {'FILE_SYSTEM_ALIAS_ASSOCIATION',
                                                                       'FILE_SYSTEM_ALIAS_DISASSOCIATION'}},
                'WindowsConfiguration': {'Aliases': [{'Lifecycle': 'AVAILABLE '
                                                                   '| CREATING '
                                                                   '| DELETING '
                                                                   '| '
                                                                   'CREATE_FAILED '
                                                                   '| '
                                                                   'DELETE_FAILED',
                                                      'Name': 'string'}]}}}

Use this operation to update the configuration of an existing Amazon FSx file system. You can update multiple properties in a single request.

For Amazon FSx for Windows File Server file systems, you can update the following properties:

AutomaticBackupRetentionDays
DailyAutomaticBackupStartTime
SelfManagedActiveDirectoryConfiguration
StorageCapacity
ThroughputCapacity
WeeklyMaintenanceStartTime

For Amazon FSx for Lustre file systems, you can update the following properties:

AutoImportPolicy
AutomaticBackupRetentionDays
DailyAutomaticBackupStartTime
WeeklyMaintenanceStartTime

See also: AWS API Documentation

Request Syntax

client.update_file_system(
    FileSystemId='string',
    ClientRequestToken='string',
    StorageCapacity=123,
    WindowsConfiguration={
        'WeeklyMaintenanceStartTime': 'string',
        'DailyAutomaticBackupStartTime': 'string',
        'AutomaticBackupRetentionDays': 123,
        'ThroughputCapacity': 123,
        'SelfManagedActiveDirectoryConfiguration': {
            'UserName': 'string',
            'Password': 'string',
            'DnsIps': [
                'string',
            ]
        }
    },
    LustreConfiguration={
        'WeeklyMaintenanceStartTime': 'string',
        'DailyAutomaticBackupStartTime': 'string',
        'AutomaticBackupRetentionDays': 123,
        'AutoImportPolicy': 'NONE'|'NEW'|'NEW_CHANGED'
    }
)

type FileSystemId

string

param FileSystemId

[REQUIRED]

Identifies the file system that you are updating.

type ClientRequestToken

string

param ClientRequestToken

A string of up to 64 ASCII characters that Amazon FSx uses to ensure idempotent updates. This string is automatically filled on your behalf when you use the AWS Command Line Interface (AWS CLI) or an AWS SDK.

This field is autopopulated if not provided.

type StorageCapacity

integer

param StorageCapacity

Use this parameter to increase the storage capacity of an Amazon FSx for Windows File Server file system. Specifies the storage capacity target value, GiB, for the file system you're updating. The storage capacity target value must be at least 10 percent (%) greater than the current storage capacity value. In order to increase storage capacity, the file system needs to have at least 16 MB/s of throughput capacity. You cannot make a storage capacity increase request if there is an existing storage capacity increase request in progress. For more information, see Managing Storage Capacity .

type WindowsConfiguration

dict

param WindowsConfiguration

The configuration updates for an Amazon FSx for Windows File Server file system.

WeeklyMaintenanceStartTime (string) --

The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. Where d is the weekday number, from 1 through 7, with 1 = Monday and 7 = Sunday.
DailyAutomaticBackupStartTime (string) --

The preferred time to start the daily automatic backup, in the UTC time zone, for example, 02:00
AutomaticBackupRetentionDays (integer) --

The number of days to retain automatic daily backups. Setting this to zero (0) disables automatic daily backups. You can retain automatic daily backups for a maximum of 90 days. For more information, see Working with Automatic Daily Backups .
ThroughputCapacity (integer) --

Sets the target value for a file system's throughput capacity, in MB/s, that you are updating the file system to. Valid values are 8, 16, 32, 64, 128, 256, 512, 1024, 2048. You cannot make a throughput capacity update request if there is an existing throughput capacity update request in progress. For more information, see Managing Throughput Capacity .
SelfManagedActiveDirectoryConfiguration (dict) --

The configuration Amazon FSx uses to join the Windows File Server instance to the self-managed Microsoft AD directory. You cannot make a self-managed Microsoft AD update request if there is an existing self-managed Microsoft AD update request in progress.
- UserName (string) --
  
  The user name for the service account on your self-managed AD domain that Amazon FSx will use to join to your AD domain. This account must have the permission to join computers to the domain in the organizational unit provided in OrganizationalUnitDistinguishedName .
- Password (string) --
  
  The password for the service account on your self-managed AD domain that Amazon FSx will use to join to your AD domain.
- DnsIps (list) --
  
  A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory.
  - (string) --

type LustreConfiguration

dict

param LustreConfiguration

The configuration object for Amazon FSx for Lustre file systems used in the UpdateFileSystem operation.

WeeklyMaintenanceStartTime (string) --

(Optional) The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
DailyAutomaticBackupStartTime (string) --

A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
AutomaticBackupRetentionDays (integer) --

The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.
AutoImportPolicy (string) --

(Optional) When you create your file system, your existing S3 objects appear as file and directory listings. Use this property to choose how Amazon FSx keeps your file and directory listing up to date as you add or modify objects in your linked S3 bucket. AutoImportPolicy can have the following values:
- NONE - (Default) AutoImport is off. Amazon FSx only updates file and directory listings from the linked S3 bucket when the file system is created. FSx does not update the file and directory listing for any new or changed objects after choosing this option.
- NEW - AutoImport is on. Amazon FSx automatically imports directory listings of any new objects added to the linked S3 bucket that do not currently exist in the FSx file system.
- NEW_CHANGED - AutoImport is on. Amazon FSx automatically imports file and directory listings of any new objects added to the S3 bucket and any existing objects that are changed in the S3 bucket after you choose this option.
For more information, see Automatically import updates from your S3 bucket .

rtype

dict

returns

Response Syntax

{
    'FileSystem': {
        'OwnerId': 'string',
        'CreationTime': datetime(2015, 1, 1),
        'FileSystemId': 'string',
        'FileSystemType': 'WINDOWS'|'LUSTRE',
        'Lifecycle': 'AVAILABLE'|'CREATING'|'FAILED'|'DELETING'|'MISCONFIGURED'|'UPDATING',
        'FailureDetails': {
            'Message': 'string'
        },
        'StorageCapacity': 123,
        'StorageType': 'SSD'|'HDD',
        'VpcId': 'string',
        'SubnetIds': [
            'string',
        ],
        'NetworkInterfaceIds': [
            'string',
        ],
        'DNSName': 'string',
        'KmsKeyId': 'string',
        'ResourceARN': 'string',
        'Tags': [
            {
                'Key': 'string',
                'Value': 'string'
            },
        ],
        'WindowsConfiguration': {
            'ActiveDirectoryId': 'string',
            'SelfManagedActiveDirectoryConfiguration': {
                'DomainName': 'string',
                'OrganizationalUnitDistinguishedName': 'string',
                'FileSystemAdministratorsGroup': 'string',
                'UserName': 'string',
                'DnsIps': [
                    'string',
                ]
            },
            'DeploymentType': 'MULTI_AZ_1'|'SINGLE_AZ_1'|'SINGLE_AZ_2',
            'RemoteAdministrationEndpoint': 'string',
            'PreferredSubnetId': 'string',
            'PreferredFileServerIp': 'string',
            'ThroughputCapacity': 123,
            'MaintenanceOperationsInProgress': [
                'PATCHING'|'BACKING_UP',
            ],
            'WeeklyMaintenanceStartTime': 'string',
            'DailyAutomaticBackupStartTime': 'string',
            'AutomaticBackupRetentionDays': 123,
            'CopyTagsToBackups': True|False,
            'Aliases': [
                {
                    'Name': 'string',
                    'Lifecycle': 'AVAILABLE'|'CREATING'|'DELETING'|'CREATE_FAILED'|'DELETE_FAILED'
                },
            ]
        },
        'LustreConfiguration': {
            'WeeklyMaintenanceStartTime': 'string',
            'DataRepositoryConfiguration': {
                'Lifecycle': 'CREATING'|'AVAILABLE'|'MISCONFIGURED'|'UPDATING'|'DELETING',
                'ImportPath': 'string',
                'ExportPath': 'string',
                'ImportedFileChunkSize': 123,
                'AutoImportPolicy': 'NONE'|'NEW'|'NEW_CHANGED',
                'FailureDetails': {
                    'Message': 'string'
                }
            },
            'DeploymentType': 'SCRATCH_1'|'SCRATCH_2'|'PERSISTENT_1',
            'PerUnitStorageThroughput': 123,
            'MountName': 'string',
            'DailyAutomaticBackupStartTime': 'string',
            'AutomaticBackupRetentionDays': 123,
            'CopyTagsToBackups': True|False,
            'DriveCacheType': 'NONE'|'READ'
        },
        'AdministrativeActions': [
            {
                'AdministrativeActionType': 'FILE_SYSTEM_UPDATE'|'STORAGE_OPTIMIZATION'|'FILE_SYSTEM_ALIAS_ASSOCIATION'|'FILE_SYSTEM_ALIAS_DISASSOCIATION',
                'ProgressPercent': 123,
                'RequestTime': datetime(2015, 1, 1),
                'Status': 'FAILED'|'IN_PROGRESS'|'PENDING'|'COMPLETED'|'UPDATED_OPTIMIZING',
                'TargetFileSystemValues': {'... recursive ...'},
                'FailureDetails': {
                    'Message': 'string'
                }
            },
        ]
    }
}

Response Structure

(dict) --

The response object for the UpdateFileSystem operation.
- FileSystem (dict) --
  
  A description of the file system that was updated.
  - OwnerId (string) --
    
    The AWS account that created the file system. If the file system was created by an AWS Identity and Access Management (IAM) user, the AWS account to which the IAM user belongs is the owner.
  - CreationTime (datetime) --
    
    The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z), also known as Unix time.
  - FileSystemId (string) --
    
    The system-generated, unique 17-digit ID of the file system.
  - FileSystemType (string) --
    
    The type of Amazon FSx file system, either LUSTRE or WINDOWS .
  - Lifecycle (string) --
    
    The lifecycle status of the file system, following are the possible values and what they mean:
    - AVAILABLE - The file system is in a healthy state, and is reachable and available for use.
    - CREATING - Amazon FSx is creating the new file system.
    - DELETING - Amazon FSx is deleting an existing file system.
    - FAILED - An existing file system has experienced an unrecoverable failure. When creating a new file system, Amazon FSx was unable to create the file system.
    - MISCONFIGURED indicates that the file system is in a failed but recoverable state.
    - UPDATING indicates that the file system is undergoing a customer initiated update.
  - FailureDetails (dict) --
    
    A structure providing details of any failures that occur when creating the file system has failed.
    - Message (string) --
      
      A message describing any failures that occurred during file system creation.
  - StorageCapacity (integer) --
    
    The storage capacity of the file system in gigabytes (GB).
  - StorageType (string) --
    
    The storage type of the file system. Valid values are SSD and HDD . If set to SSD , the file system uses solid state drive storage. If set to HDD , the file system uses hard disk drive storage.
  - VpcId (string) --
    
    The ID of the primary VPC for the file system.
  - SubnetIds (list) --
    
    Specifies the IDs of the subnets that the file system is accessible from. For Windows MULTI_AZ_1 file system deployment type, there are two subnet IDs, one for the preferred file server and one for the standby file server. The preferred file server subnet identified in the PreferredSubnetID property. All other file systems have only one subnet ID.
    
    For Lustre file systems, and Single-AZ Windows file systems, this is the ID of the subnet that contains the endpoint for the file system. For MULTI_AZ_1 Windows file systems, the endpoint for the file system is available in the PreferredSubnetID .
    - (string) --
      
      The ID for a subnet. A subnet is a range of IP addresses in your virtual private cloud (VPC). For more information, see VPC and Subnets in the Amazon VPC User Guide.
  - NetworkInterfaceIds (list) --
    
    The IDs of the elastic network interface from which a specific file system is accessible. The elastic network interface is automatically created in the same VPC that the Amazon FSx file system was created in. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide.
    
    For an Amazon FSx for Windows File Server file system, you can have one network interface ID. For an Amazon FSx for Lustre file system, you can have more than one.
    - (string) --
      
      An elastic network interface ID. An elastic network interface is a logical networking component in a virtual private cloud (VPC) that represents a virtual network card. For more information, see Elastic Network Interfaces in the Amazon EC2 User Guide for Linux Instances .
  - DNSName (string) --
    
    The DNS name for the file system.
  - KmsKeyId (string) --
    
    The ID of the AWS Key Management Service (AWS KMS) key used to encrypt the file system's data for Amazon FSx for Windows File Server file systems and persistent Amazon FSx for Lustre file systems at rest. In either case, if not specified, the Amazon FSx managed key is used. The scratch Amazon FSx for Lustre file systems are always encrypted at rest using Amazon FSx managed keys. For more information, see Encrypt in the AWS Key Management Service API Reference .
  - ResourceARN (string) --
    
    The Amazon Resource Name (ARN) for the file system resource.
  - Tags (list) --
    
    The tags to associate with the file system. For more information, see Tagging Your Amazon EC2 Resources in the Amazon EC2 User Guide .
    - (dict) --
      
      Specifies a key-value pair for a resource tag.
      - Key (string) --
        
        A value that specifies the TagKey , the name of the tag. Tag keys must be unique for the resource to which they are attached.
      - Value (string) --
        
        A value that specifies the TagValue , the value assigned to the corresponding tag key. Tag values can be null and don't have to be unique in a tag set. For example, you can have a key-value pair in a tag set of finances : April and also of payroll : April .
  - WindowsConfiguration (dict) --
    
    The configuration for this Microsoft Windows file system.
    - ActiveDirectoryId (string) --
      
      The ID for an existing Microsoft Active Directory instance that the file system should join when it's created.
    - SelfManagedActiveDirectoryConfiguration (dict) --
      
      The configuration of the self-managed Microsoft Active Directory (AD) directory to which the Windows File Server instance is joined.
      - DomainName (string) --
        
        The fully qualified domain name of the self-managed AD directory.
      - OrganizationalUnitDistinguishedName (string) --
        
        The fully qualified distinguished name of the organizational unit within the self-managed AD directory to which the Windows File Server instance is joined.
      - FileSystemAdministratorsGroup (string) --
        
        The name of the domain group whose members have administrative privileges for the FSx file system.
      - UserName (string) --
        
        The user name for the service account on your self-managed AD domain that FSx uses to join to your AD domain.
      - DnsIps (list) --
        
        A list of up to two IP addresses of DNS servers or domain controllers in the self-managed AD directory.
        
        (string) --
    - DeploymentType (string) --
      
      Specifies the file system deployment type, valid values are the following:
      - MULTI_AZ_1 - Specifies a high availability file system that is configured for Multi-AZ redundancy to tolerate temporary Availability Zone (AZ) unavailability, and supports SSD and HDD storage.
      - SINGLE_AZ_1 - (Default) Specifies a file system that is configured for single AZ redundancy, only supports SSD storage.
      - SINGLE_AZ_2 - Latest generation Single AZ file system. Specifies a file system that is configured for single AZ redundancy and supports SSD and HDD storage.
      For more information, see Single-AZ and Multi-AZ File Systems .
    - RemoteAdministrationEndpoint (string) --
      
      For MULTI_AZ_1 deployment types, use this endpoint when performing administrative tasks on the file system using Amazon FSx Remote PowerShell.
      
      For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this is the DNS name of the file system.
      
      This endpoint is temporarily unavailable when the file system is undergoing maintenance.
    - PreferredSubnetId (string) --
      
      For MULTI_AZ_1 deployment types, it specifies the ID of the subnet where the preferred file server is located. Must be one of the two subnet IDs specified in SubnetIds property. Amazon FSx serves traffic from this subnet except in the event of a failover to the secondary file server.
      
      For SINGLE_AZ_1 and SINGLE_AZ_2 deployment types, this value is the same as that for SubnetIDs . For more information, see Availability and Durability: Single-AZ and Multi-AZ File Systems
    - PreferredFileServerIp (string) --
      
      For MULTI_AZ_1 deployment types, the IP address of the primary, or preferred, file server.
      
      Use this IP address when mounting the file system on Linux SMB clients or Windows SMB clients that are not joined to a Microsoft Active Directory. Applicable for all Windows file system deployment types. This IP address is temporarily unavailable when the file system is undergoing maintenance. For Linux and Windows SMB clients that are joined to an Active Directory, use the file system's DNSName instead. For more information on mapping and mounting file shares, see Accessing File Shares .
    - ThroughputCapacity (integer) --
      
      The throughput of an Amazon FSx file system, measured in megabytes per second.
    - MaintenanceOperationsInProgress (list) --
      
      The list of maintenance operations in progress for this file system.
      - (string) --
        
        An enumeration specifying the currently ongoing maintenance operation.
    - WeeklyMaintenanceStartTime (string) --
      
      The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
    - DailyAutomaticBackupStartTime (string) --
      
      The preferred time to take daily automatic backups, in the UTC time zone.
    - AutomaticBackupRetentionDays (integer) --
      
      The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days.
    - CopyTagsToBackups (boolean) --
      
      A boolean flag indicating whether tags on the file system should be copied to backups. This value defaults to false. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value.
    - Aliases (list) --
      
      An array of one or more DNS aliases that are currently associated with the Amazon FSx file system. Aliases allow you to use existing DNS names to access the data in your Amazon FSx file system. You can associate up to 50 aliases with a file system at any time. You can associate additional DNS aliases after you create the file system using the AssociateFileSystemAliases operation. You can remove DNS aliases from the file system after it is created using the DisassociateFileSystemAliases operation. You only need to specify the alias name in the request payload. For more information, see DNS aliases .
      - (dict) --
        
        A DNS alias that is associated with the file system. You can use a DNS alias to access a file system using user-defined DNS names, in addition to the default DNS name that Amazon FSx assigns to the file system. For more information, see DNS aliases in the FSx for Windows File Server User Guide .
        
        Name (string) --
        
        The name of the DNS alias. The alias name has to meet the following requirements:
        
        Formatted as a fully-qualified domain name (FQDN), hostname.domain , for example, accounting.example.com .
        
        Can contain alphanumeric characters and the hyphen (-).
        
        Cannot start or end with a hyphen.
        
        Can start with a numeric.
        
        For DNS names, Amazon FSx stores alphabetic characters as lowercase letters (a-z), regardless of how you specify them: as uppercase letters, lowercase letters, or the corresponding letters in escape codes.
        
        Lifecycle (string) --
        
        Describes the state of the DNS alias.
        
        AVAILABLE - The DNS alias is associated with an Amazon FSx file system.
        
        CREATING - Amazon FSx is creating the DNS alias and associating it with the file system.
        
        CREATE_FAILED - Amazon FSx was unable to associate the DNS alias with the file system.
        
        DELETING - Amazon FSx is disassociating the DNS alias from the file system and deleting it.
        
        DELETE_FAILED - Amazon FSx was unable to disassocate the DNS alias from the file system.
  - LustreConfiguration (dict) --
    
    The configuration for the Amazon FSx for Lustre file system.
    - WeeklyMaintenanceStartTime (string) --
      
      The preferred start time to perform weekly maintenance, formatted d:HH:MM in the UTC time zone. d is the weekday number, from 1 through 7, beginning with Monday and ending with Sunday.
    - DataRepositoryConfiguration (dict) --
      
      The data repository configuration object for Lustre file systems returned in the response of the CreateFileSystem operation.
      - Lifecycle (string) --
        
        Describes the state of the file system's S3 durable data repository, if it is configured with an S3 repository. The lifecycle can have the following values:
        
        CREATING - The data repository configuration between the FSx file system and the linked S3 data repository is being created. The data repository is unavailable.
        
        AVAILABLE - The data repository is available for use.
        
        MISCONFIGURED - Amazon FSx cannot automatically import updates from the S3 bucket until the data repository configuration is corrected. For more information, see Troubleshooting a Misconfigured linked S3 bucket .
        
        UPDATING - The data repository is undergoing a customer initiated update and availability may be impacted.
      - ImportPath (string) --
        
        The import path to the Amazon S3 bucket (and optional prefix) that you're using as the data repository for your FSx for Lustre file system, for example s3://import-bucket/optional-prefix . If a prefix is specified after the Amazon S3 bucket name, only object keys with that prefix are loaded into the file system.
      - ExportPath (string) --
        
        The export path to the Amazon S3 bucket (and prefix) that you are using to store new and changed Lustre file system files in S3.
      - ImportedFileChunkSize (integer) --
        
        For files imported from a data repository, this value determines the stripe count and maximum amount of data per file (in MiB) stored on a single physical disk. The maximum number of disks that a single file can be striped across is limited by the total number of disks that make up the file system.
        
        The default chunk size is 1,024 MiB (1 GiB) and can go as high as 512,000 MiB (500 GiB). Amazon S3 objects have a maximum size of 5 TB.
      - AutoImportPolicy (string) --
        
        Describes the file system's linked S3 data repository's AutoImportPolicy . The AutoImportPolicy configures how Amazon FSx keeps your file and directory listings up to date as you add or modify objects in your linked S3 bucket. AutoImportPolicy can have the following values:
        
        NONE - (Default) AutoImport is off. Amazon FSx only updates file and directory listings from the linked S3 bucket when the file system is created. FSx does not update file and directory listings for any new or changed objects after choosing this option.
        
        NEW - AutoImport is on. Amazon FSx automatically imports directory listings of any new objects added to the linked S3 bucket that do not currently exist in the FSx file system.
        
        NEW_CHANGED - AutoImport is on. Amazon FSx automatically imports file and directory listings of any new objects added to the S3 bucket and any existing objects that are changed in the S3 bucket after you choose this option.
        
        For more information, see Automatically import updates from your S3 bucket .
      - FailureDetails (dict) --
        
        Provides detailed information about the data respository if its Lifecycle is set to MISCONFIGURED .
        
        Message (string) --
        
        A detailed error message.
    - DeploymentType (string) --
      
      The deployment type of the FSX for Lustre file system. Scratch deployment type is designed for temporary storage and shorter-term processing of data.
      
      SCRATCH_1 and SCRATCH_2 deployment types are best suited for when you need temporary storage and shorter-term processing of data. The SCRATCH_2 deployment type provides in-transit encryption of data and higher burst throughput capacity than SCRATCH_1 .
      
      The PERSISTENT_1 deployment type is used for longer-term storage and workloads and encryption of data in transit. To learn more about deployment types, see FSx for Lustre Deployment Options . (Default = SCRATCH_1 )
    - PerUnitStorageThroughput (integer) --
      
      Per unit storage throughput represents the megabytes per second of read or write throughput per 1 tebibyte of storage provisioned. File system throughput capacity is equal to Storage capacity (TiB) * PerUnitStorageThroughput (MB/s/TiB). This option is only valid for PERSISTENT_1 deployment types.
      
      Valid values for SSD storage: 50, 100, 200. Valid values for HDD storage: 12, 40.
    - MountName (string) --
      
      You use the MountName value when mounting the file system.
      
      For the SCRATCH_1 deployment type, this value is always "fsx ". For SCRATCH_2 and PERSISTENT_1 deployment types, this value is a string that is unique within an AWS Region.
    - DailyAutomaticBackupStartTime (string) --
      
      A recurring daily time, in the format HH:MM . HH is the zero-padded hour of the day (0-23), and MM is the zero-padded minute of the hour. For example, 05:00 specifies 5 AM daily.
    - AutomaticBackupRetentionDays (integer) --
      
      The number of days to retain automatic backups. Setting this to 0 disables automatic backups. You can retain automatic backups for a maximum of 90 days. The default is 0.
    - CopyTagsToBackups (boolean) --
      
      A boolean flag indicating whether tags on the file system should be copied to backups. If it's set to true, all tags on the file system are copied to all automatic backups and any user-initiated backups where the user doesn't specify any tags. If this value is true, and you specify one or more tags, only the specified tags are copied to backups. If you specify one or more tags when creating a user-initiated backup, no tags are copied from the file system, regardless of this value. (Default = false)
    - DriveCacheType (string) --
      
      The type of drive cache used by PERSISTENT_1 file systems that are provisioned with HDD storage devices. This parameter is required when storage type is HDD. Set to READ , improve the performance for frequently accessed files and allows 20% of the total storage capacity of the file system to be cached.
      
      This parameter is required when StorageType is set to HDD.
  - AdministrativeActions (list) --
    
    A list of administrative actions for the file system that are in process or waiting to be processed. Administrative actions describe changes to the Windows file system that you have initiated using the UpdateFileSystem action.
    - (dict) --
      
      Describes a specific Amazon FSx Administrative Action for the current Windows file system.
      - AdministrativeActionType (string) --
        
        Describes the type of administrative action, as follows:
        
        FILE_SYSTEM_UPDATE - A file system update administrative action initiated by the user from the Amazon FSx console, API (UpdateFileSystem), or CLI (update-file-system).
        
        STORAGE_OPTIMIZATION - Once the FILE_SYSTEM_UPDATE task to increase a file system's storage capacity completes successfully, a STORAGE_OPTIMIZATION task starts. Storage optimization is the process of migrating the file system data to the new, larger disks. You can track the storage migration progress using the ProgressPercent property. When STORAGE_OPTIMIZATION completes successfully, the parent FILE_SYSTEM_UPDATE action status changes to COMPLETED . For more information, see Managing Storage Capacity .
        
        FILE_SYSTEM_ALIAS_ASSOCIATION - A file system update to associate a new DNS alias with the file system. For more information, see .
        
        FILE_SYSTEM_ALIAS_DISASSOCIATION - A file system update to disassociate a DNS alias from the file system. For more information, see .
      - ProgressPercent (integer) --
        
        Provides the percent complete of a STORAGE_OPTIMIZATION administrative action. Does not apply to any other administrative action type.
      - RequestTime (datetime) --
        
        Time that the administrative action request was received.
      - Status (string) --
        
        Describes the status of the administrative action, as follows:
        
        FAILED - Amazon FSx failed to process the administrative action successfully.
        
        IN_PROGRESS - Amazon FSx is processing the administrative action.
        
        PENDING - Amazon FSx is waiting to process the administrative action.
        
        COMPLETED - Amazon FSx has finished processing the administrative task.
        
        UPDATED_OPTIMIZING - For a storage capacity increase update, Amazon FSx has updated the file system with the new storage capacity, and is now performing the storage optimization process. For more information, see Managing Storage Capacity .
      - TargetFileSystemValues (dict) --
        
        Describes the target value for the administration action, provided in the UpdateFileSystem operation. Returned for FILE_SYSTEM_UPDATE administrative actions.
      - FailureDetails (dict) --
        
        Provides information about a failed administrative action.
        
        Message (string) --
        
        Error message providing details about the failed administrative action.