2017/01/24 - Amazon EC2 Container Service - 1 new 1 updated api methods
Changes Amazon ECS now supports a state for container instances that can be used to drain a container instance in preparation for maintenance or cluster scale down.
Modifies the status of an Amazon ECS container instance.
You can change the status of a container instance to DRAINING to manually remove an instance from a cluster, for example to perform system updates, update the Docker daemon, or scale down the cluster size.
When you set a container instance to DRAINING , Amazon ECS prevents new tasks from being scheduled for placement on the container instance and replacement service tasks are started on other container instances in the cluster if the resources are available. Service tasks on the container instance that are in the PENDING state are stopped immediately.
Service tasks on the container instance that are in the RUNNING state are stopped and replaced according the service's deployment configuration parameters, minimumHealthyPercent and maximumPercent . Note that you can change the deployment configuration of your service using UpdateService .
If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount temporarily during task replacement. For example, desiredCount is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. If the minimum is 100%, the service scheduler can't remove existing tasks until the replacement tasks are considered healthy. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they are in the RUNNING state and the container instance they are hosted on is reported as healthy by the load balancer.
The maximumPercent parameter represents an upper limit on the number of running tasks during task replacement, which enables you to define the replacement batch size. For example, if desiredCount of four tasks, a maximum of 200% starts four new tasks before stopping the four tasks to be drained (provided that the cluster resources required to do this are available). If the maximum is 100%, then replacement tasks can't start until the draining tasks have stopped.
Any PENDING or RUNNING tasks that do not belong to a service are not affected; you must wait for them to finish or stop them manually.
A container instance has completed draining when it has no more RUNNING tasks. You can verify this using ListTasks .
When you set a container instance to ACTIVE , the Amazon ECS scheduler can begin scheduling tasks on the instance again.
See also: AWS API Documentation
Request Syntax
client.update_container_instances_state(
cluster='string',
containerInstances=[
'string',
],
status='ACTIVE'|'DRAINING'
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container instance to update. If you do not specify a cluster, the default cluster is assumed.
list
[REQUIRED]
A space-separated list of container instance IDs or full Amazon Resource Name (ARN) entries.
(string) --
string
[REQUIRED]
The container instance state with which to update the container instance.
dict
Response Syntax
{
'containerInstances': [
{
'containerInstanceArn': 'string',
'ec2InstanceId': 'string',
'version': 123,
'versionInfo': {
'agentVersion': 'string',
'agentHash': 'string',
'dockerVersion': 'string'
},
'remainingResources': [
{
'name': 'string',
'type': 'string',
'doubleValue': 123.0,
'longValue': 123,
'integerValue': 123,
'stringSetValue': [
'string',
]
},
],
'registeredResources': [
{
'name': 'string',
'type': 'string',
'doubleValue': 123.0,
'longValue': 123,
'integerValue': 123,
'stringSetValue': [
'string',
]
},
],
'status': 'string',
'agentConnected': True|False,
'runningTasksCount': 123,
'pendingTasksCount': 123,
'agentUpdateStatus': 'PENDING'|'STAGING'|'STAGED'|'UPDATING'|'UPDATED'|'FAILED',
'attributes': [
{
'name': 'string',
'value': 'string',
'targetType': 'container-instance',
'targetId': 'string'
},
]
},
],
'failures': [
{
'arn': 'string',
'reason': 'string'
},
]
}
Response Structure
(dict) --
containerInstances (list) --
The list of container instances.
(dict) --
An EC2 instance that is running the Amazon ECS agent and has been registered with a cluster.
containerInstanceArn (string) --
The Amazon Resource Name (ARN) of the container instance. The ARN contains the arn:aws:ecs namespace, followed by the region of the container instance, the AWS account ID of the container instance owner, the container-instance namespace, and then the container instance ID. For example, ``arn:aws:ecs:region :aws_account_id :container-instance/container_instance_ID `` .
ec2InstanceId (string) --
The EC2 instance ID of the container instance.
version (integer) --
The version counter for the container instance. Every time a container instance experiences a change that triggers a CloudWatch event, the version counter is incremented. If you are replicating your Amazon ECS container instance state with CloudWatch events, you can compare the version of a container instance reported by the Amazon ECS APIs with the version reported in CloudWatch events for the container instance (inside the detail object) to verify that the version in your event stream is current.
versionInfo (dict) --
The version information for the Amazon ECS container agent and Docker daemon running on the container instance.
agentVersion (string) --
The version number of the Amazon ECS container agent.
agentHash (string) --
The Git commit hash for the Amazon ECS container agent build on the amazon-ecs-agent GitHub repository.
dockerVersion (string) --
The Docker version running on the container instance.
remainingResources (list) --
For most resource types, this parameter describes the remaining resources of the container instance that are available for new tasks. For port resource types, this parameter describes the ports that are reserved by the Amazon ECS container agent and any containers that have reserved port mappings; any port that is not specified here is available for new tasks.
(dict) --
Describes the resources available for a container instance.
name (string) --
The name of the resource, such as cpu , memory , ports , or a user-defined resource.
type (string) --
The type of the resource, such as INTEGER , DOUBLE , LONG , or STRINGSET .
doubleValue (float) --
When the doubleValue type is set, the value of the resource must be a double precision floating-point type.
longValue (integer) --
When the longValue type is set, the value of the resource must be an extended precision floating-point type.
integerValue (integer) --
When the integerValue type is set, the value of the resource must be an integer.
stringSetValue (list) --
When the stringSetValue type is set, the value of the resource must be a string type.
(string) --
registeredResources (list) --
For most resource types, this parameter describes the registered resources on the container instance that are in use by current tasks. For port resource types, this parameter describes the ports that were reserved by the Amazon ECS container agent when it registered the container instance with Amazon ECS.
(dict) --
Describes the resources available for a container instance.
name (string) --
The name of the resource, such as cpu , memory , ports , or a user-defined resource.
type (string) --
The type of the resource, such as INTEGER , DOUBLE , LONG , or STRINGSET .
doubleValue (float) --
When the doubleValue type is set, the value of the resource must be a double precision floating-point type.
longValue (integer) --
When the longValue type is set, the value of the resource must be an extended precision floating-point type.
integerValue (integer) --
When the integerValue type is set, the value of the resource must be an integer.
stringSetValue (list) --
When the stringSetValue type is set, the value of the resource must be a string type.
(string) --
status (string) --
The status of the container instance. The valid values are ACTIVE or INACTIVE . ACTIVE indicates that the container instance can accept tasks.
agentConnected (boolean) --
This parameter returns true if the agent is actually connected to Amazon ECS. Registered instances with an agent that may be unhealthy or stopped return false , and instances without a connected agent cannot accept placement requests.
runningTasksCount (integer) --
The number of tasks on the container instance that are in the RUNNING status.
pendingTasksCount (integer) --
The number of tasks on the container instance that are in the PENDING status.
agentUpdateStatus (string) --
The status of the most recent agent update. If an update has never been requested, this value is NULL .
attributes (list) --
The attributes set for the container instance, either by the Amazon ECS container agent at instance registration or manually with the PutAttributes operation.
(dict) --
An attribute is a name-value pair associated with an Amazon ECS object. Attributes enable you to extend the Amazon ECS data model by adding custom metadata to your resources. For more information, see Attributes in the Amazon EC2 Container Service Developer Guide .
name (string) --
The name of the attribute. Up to 128 letters (uppercase and lowercase), numbers, hyphens, underscores, and periods are allowed.
value (string) --
The value of the attribute. Up to 128 letters (uppercase and lowercase), numbers, hyphens, underscores, periods, at signs (@), forward slashes, colons, and spaces are allowed.
targetType (string) --
The type of the target with which to attach the attribute. This parameter is required if you use the short form ID for a resource instead of the full Amazon Resource Name (ARN).
targetId (string) --
The ID of the target. You can specify the short form ID for a resource or the full Amazon Resource Name (ARN).
failures (list) --
Any failures associated with the call.
(dict) --
A failed resource.
arn (string) --
The Amazon Resource Name (ARN) of the failed resource.
reason (string) --
The reason for the failure.
{'status': 'ACTIVE | DRAINING'}
Returns a list of container instances in a specified cluster. You can filter the results of a ListContainerInstances operation with cluster query language statements inside the filter parameter. For more information, see Cluster Query Language in the Amazon EC2 Container Service Developer Guide .
See also: AWS API Documentation
Request Syntax
client.list_container_instances(
cluster='string',
filter='string',
nextToken='string',
maxResults=123,
status='ACTIVE'|'DRAINING'
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the container instances to list. If you do not specify a cluster, the default cluster is assumed.
string
You can filter the results of a ListContainerInstances operation with cluster query language statements. For more information, see Cluster Query Language in the Amazon EC2 Container Service Developer Guide .
string
The nextToken value returned from a previous paginated ListContainerInstances request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value. This value is null when there are no more results to return.
Note
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
integer
The maximum number of container instance results returned by ListContainerInstances in paginated output. When this parameter is used, ListContainerInstances only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another ListContainerInstances request with the returned nextToken value. This value can be between 1 and 100. If this parameter is not used, then ListContainerInstances returns up to 100 results and a nextToken value if applicable.
string
The container instance status with which to filter the ListContainerInstances results. Specifying a container instance status of DRAINING limits the results to container instances that have been set to drain with the UpdateContainerInstancesState operation.
dict
Response Syntax
{
'containerInstanceArns': [
'string',
],
'nextToken': 'string'
}
Response Structure
(dict) --
containerInstanceArns (list) --
The list of container instances with full Amazon Resource Name (ARN) entries for each container instance associated with the specified cluster.
(string) --
nextToken (string) --
The nextToken value to include in a future ListContainerInstances request. When the results of a ListContainerInstances request exceed maxResults , this value can be used to retrieve the next page of results. This value is null when there are no more results to return.