2018/05/09 - Amazon Relational Database Service - 2 new 9 updated api methods
Changes Changes to support the Aurora MySQL Backtrack feature.
Backtracks a DB cluster to a specific time, without creating a new DB cluster.
For more information on backtracking, see Backtracking an Aurora DB Cluster in the Amazon RDS User Guide.
See also: AWS API Documentation
Request Syntax
client.backtrack_db_cluster(
DBClusterIdentifier='string',
BacktrackTo=datetime(2015, 1, 1),
Force=True|False,
UseEarliestTimeOnPointInTimeUnavailable=True|False
)
string
[REQUIRED]
The DB cluster identifier of the DB cluster to be backtracked. This parameter is stored as a lowercase string.
Constraints:
Must contain from 1 to 63 alphanumeric characters or hyphens.
First character must be a letter.
Cannot end with a hyphen or contain two consecutive hyphens.
Example: my-cluster1
datetime
[REQUIRED]
The timestamp of the time to backtrack the DB cluster to, specified in ISO 8601 format. For more information about ISO 8601, see the ISO8601 Wikipedia page.
Note
If the specified time is not a consistent time for the DB cluster, Aurora automatically chooses the nearest possible consistent time for the DB cluster.
Constraints:
Must contain a valid ISO 8601 timestamp.
Cannot contain a timestamp set in the future.
Example: 2017-07-08T18:00Z
boolean
A value that, if specified, forces the DB cluster to backtrack when binary logging is enabled. Otherwise, an error occurs when binary logging is enabled.
boolean
If BacktrackTo is set to a timestamp earlier than the earliest backtrack time, this value backtracks the DB cluster to the earliest possible backtrack time. Otherwise, an error occurs.
dict
Response Syntax
{
'DBClusterIdentifier': 'string',
'BacktrackIdentifier': 'string',
'BacktrackTo': datetime(2015, 1, 1),
'BacktrackedFrom': datetime(2015, 1, 1),
'BacktrackRequestCreationTime': datetime(2015, 1, 1),
'Status': 'string'
}
Response Structure
(dict) --
This data type is used as a response element in the DescribeDBClusterBacktracks action.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
BacktrackIdentifier (string) --
Contains the backtrack identifier.
BacktrackTo (datetime) --
The timestamp of the time to which the DB cluster was backtracked.
BacktrackedFrom (datetime) --
The timestamp of the time from which the DB cluster was backtracked.
BacktrackRequestCreationTime (datetime) --
The timestamp of the time at which the backtrack was requested.
Status (string) --
The status of the backtrack. This property returns one of the following values:
applying - The backtrack is currently being applied to or rolled back from the DB cluster.
completed - The backtrack has successfully been applied to or rolled back from the DB cluster.
failed - An error occurred while the backtrack was applied to or rolled back from the DB cluster.
pending - The backtrack is currently pending application to or rollback from the DB cluster.
Returns information about backtracks for a DB cluster.
For more information on Amazon Aurora, see Aurora on Amazon RDS in the Amazon RDS User Guide.
See also: AWS API Documentation
Request Syntax
client.describe_db_cluster_backtracks(
DBClusterIdentifier='string',
BacktrackIdentifier='string',
Filters=[
{
'Name': 'string',
'Values': [
'string',
]
},
],
MaxRecords=123,
Marker='string'
)
string
[REQUIRED]
The DB cluster identifier of the DB cluster to be described. This parameter is stored as a lowercase string.
Constraints:
Must contain from 1 to 63 alphanumeric characters or hyphens.
First character must be a letter.
Cannot end with a hyphen or contain two consecutive hyphens.
Example: my-cluster1
string
If specified, this value is the backtrack identifier of the backtrack to be described.
Constraints:
Must contain a valid universally unique identifier (UUID). For more information about UUIDs, see A Universally Unique Identifier (UUID) URN Namespace .
Example: 123e4567-e89b-12d3-a456-426655440000
list
A filter that specifies one or more DB clusters to describe. Supported filters include the following:
db-cluster-backtrack-id - Accepts backtrack identifiers. The results list includes information about only the backtracks identified by these identifiers.
db-cluster-backtrack-status - Accepts any of the following backtrack status values:
applying
completed
failed
pending
The results list includes information about only the backtracks identified by these values. For more information about backtrack status values, see DBClusterBacktrack .
(dict) --
A filter name and value pair that is used to return a more specific list of results from a describe operation. Filters can be used to match a set of resources by specific criteria, such as IDs. The filters supported by a describe operation are documented with the describe operation.
Note
Currently, wildcards are not supported in filters.
The following actions can be filtered:
DescribeDBClusterBacktracks
DescribeDBClusters
DescribeDBInstances
DescribePendingMaintenanceActions
Name (string) -- [REQUIRED]
The name of the filter. Filter names are case-sensitive.
Values (list) -- [REQUIRED]
One or more filter values. Filter values are case-sensitive.
(string) --
integer
The maximum number of records to include in the response. If more records exist than the specified MaxRecords value, a pagination token called a marker is included in the response so that the remaining results can be retrieved.
Default: 100
Constraints: Minimum 20, maximum 100.
string
An optional pagination token provided by a previous DescribeDBClusterBacktracks request. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by MaxRecords .
dict
Response Syntax
{
'Marker': 'string',
'DBClusterBacktracks': [
{
'DBClusterIdentifier': 'string',
'BacktrackIdentifier': 'string',
'BacktrackTo': datetime(2015, 1, 1),
'BacktrackedFrom': datetime(2015, 1, 1),
'BacktrackRequestCreationTime': datetime(2015, 1, 1),
'Status': 'string'
},
]
}
Response Structure
(dict) --
Contains the result of a successful invocation of the DescribeDBClusterBacktracks action.
Marker (string) --
A pagination token that can be used in a subsequent DescribeDBClusterBacktracks request.
DBClusterBacktracks (list) --
Contains a list of backtracks for the user.
(dict) --
This data type is used as a response element in the DescribeDBClusterBacktracks action.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
BacktrackIdentifier (string) --
Contains the backtrack identifier.
BacktrackTo (datetime) --
The timestamp of the time to which the DB cluster was backtracked.
BacktrackedFrom (datetime) --
The timestamp of the time from which the DB cluster was backtracked.
BacktrackRequestCreationTime (datetime) --
The timestamp of the time at which the backtrack was requested.
Status (string) --
The status of the backtrack. This property returns one of the following values:
applying - The backtrack is currently being applied to or rolled back from the DB cluster.
completed - The backtrack has successfully been applied to or rolled back from the DB cluster.
failed - An error occurred while the backtrack was applied to or rolled back from the DB cluster.
pending - The backtrack is currently pending application to or rollback from the DB cluster.
{'BacktrackWindow': 'long'}
Response {'DBCluster': {'BacktrackConsumedChangeRecords': 'long',
'BacktrackWindow': 'long',
'EarliestBacktrackTime': 'timestamp'}}
Creates a new Amazon Aurora DB cluster.
You can use the ReplicationSourceIdentifier parameter to create the DB cluster as a Read Replica of another DB cluster or Amazon RDS MySQL DB instance. For cross-region replication where the DB cluster identified by ReplicationSourceIdentifier is encrypted, you must also specify the PreSignedUrl parameter.
For more information on Amazon Aurora, see Aurora on Amazon RDS in the Amazon RDS User Guide.
See also: AWS API Documentation
Request Syntax
client.create_db_cluster(
AvailabilityZones=[
'string',
],
BackupRetentionPeriod=123,
CharacterSetName='string',
DatabaseName='string',
DBClusterIdentifier='string',
DBClusterParameterGroupName='string',
VpcSecurityGroupIds=[
'string',
],
DBSubnetGroupName='string',
Engine='string',
EngineVersion='string',
Port=123,
MasterUsername='string',
MasterUserPassword='string',
OptionGroupName='string',
PreferredBackupWindow='string',
PreferredMaintenanceWindow='string',
ReplicationSourceIdentifier='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
StorageEncrypted=True|False,
KmsKeyId='string',
PreSignedUrl='string',
EnableIAMDatabaseAuthentication=True|False,
BacktrackWindow=123,
SourceRegion='string'
)
list
A list of EC2 Availability Zones that instances in the DB cluster can be created in. For information on AWS Regions and Availability Zones, see Regions and Availability Zones .
(string) --
integer
The number of days for which automated backups are retained. You must specify a minimum value of 1.
Default: 1
Constraints:
Must be a value from 1 to 35
string
A value that indicates that the DB cluster should be associated with the specified CharacterSet.
string
The name for your database of up to 64 alpha-numeric characters. If you do not provide a name, Amazon RDS will not create a database in the DB cluster you are creating.
string
[REQUIRED]
The DB cluster identifier. This parameter is stored as a lowercase string.
Constraints:
Must contain from 1 to 63 letters, numbers, or hyphens.
First character must be a letter.
Cannot end with a hyphen or contain two consecutive hyphens.
Example: my-cluster1
string
The name of the DB cluster parameter group to associate with this DB cluster. If this argument is omitted, default.aurora5.6 is used.
Constraints:
If supplied, must match the name of an existing DBClusterParameterGroup.
list
A list of EC2 VPC security groups to associate with this DB cluster.
(string) --
string
A DB subnet group to associate with this DB cluster.
Constraints: Must match the name of an existing DBSubnetGroup. Must not be default.
Example: mySubnetgroup
string
[REQUIRED]
The name of the database engine to be used for this DB cluster.
Valid Values: aurora (for MySQL 5.6-compatible Aurora), aurora-mysql (for MySQL 5.7-compatible Aurora), and aurora-postgresql
string
The version number of the database engine to use.
Aurora MySQL
Example: 5.6.10a , 5.7.12
Aurora PostgreSQL
Example: 9.6.3
integer
The port number on which the instances in the DB cluster accept connections.
Default: 3306 if engine is set as aurora or 5432 if set to aurora-postgresql.
string
The name of the master user for the DB cluster.
Constraints:
Must be 1 to 16 letters or numbers.
First character must be a letter.
Cannot be a reserved word for the chosen database engine.
string
The password for the master database user. This password can contain any printable ASCII character except "/", """, or "@".
Constraints: Must contain from 8 to 41 characters.
string
A value that indicates that the DB cluster should be associated with the specified option group.
Permanent options can't be removed from an option group. The option group can't be removed from a DB cluster once it is associated with a DB cluster.
string
The daily time range during which automated backups are created if automated backups are enabled using the BackupRetentionPeriod parameter.
The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region. To see the time blocks available, see Adjusting the Preferred Maintenance Window in the Amazon RDS User Guide.
Constraints:
Must be in the format hh24:mi-hh24:mi .
Must be in Universal Coordinated Time (UTC).
Must not conflict with the preferred maintenance window.
Must be at least 30 minutes.
string
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Format: ddd:hh24:mi-ddd:hh24:mi
The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred Maintenance Window in the Amazon RDS User Guide.
Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.
Constraints: Minimum 30-minute window.
string
The Amazon Resource Name (ARN) of the source DB instance or DB cluster if this DB cluster is created as a Read Replica.
list
A list of tags. For more information, see Tagging Amazon RDS Resources .
(dict) --
Metadata assigned to an Amazon RDS resource consisting of a key-value pair.
Key (string) --
A key is the required name of the tag. The string value can be from 1 to 128 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can only contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\p{L}\p{Z}\p{N}_.:/=+\-]*)$").
Value (string) --
A value is the optional value of the tag. The string value can be from 1 to 256 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can only contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\p{L}\p{Z}\p{N}_.:/=+\-]*)$").
boolean
Specifies whether the DB cluster is encrypted.
string
The AWS KMS key identifier for an encrypted DB cluster.
The KMS key identifier is the Amazon Resource Name (ARN) for the KMS encryption key. If you are creating a DB cluster with the same AWS account that owns the KMS encryption key used to encrypt the new DB cluster, then you can use the KMS key alias instead of the ARN for the KMS encryption key.
If an encryption key is not specified in KmsKeyId :
If ReplicationSourceIdentifier identifies an encrypted source, then Amazon RDS will use the encryption key used to encrypt the source. Otherwise, Amazon RDS will use your default encryption key.
If the StorageEncrypted parameter is true and ReplicationSourceIdentifier is not specified, then Amazon RDS will use your default encryption key.
AWS KMS creates the default encryption key for your AWS account. Your AWS account has a different default encryption key for each AWS Region.
If you create a Read Replica of an encrypted DB cluster in another AWS Region, you must set KmsKeyId to a KMS key ID that is valid in the destination AWS Region. This key is used to encrypt the Read Replica in that AWS Region.
string
A URL that contains a Signature Version 4 signed request for the CreateDBCluster action to be called in the source AWS Region where the DB cluster is replicated from. You only need to specify PreSignedUrl when you are performing cross-region replication from an encrypted DB cluster.
The pre-signed URL must be a valid request for the CreateDBCluster API action that can be executed in the source AWS Region that contains the encrypted DB cluster to be copied.
The pre-signed URL request must contain the following parameter values:
KmsKeyId - The AWS KMS key identifier for the key to use to encrypt the copy of the DB cluster in the destination AWS Region. This should refer to the same KMS key for both the CreateDBCluster action that is called in the destination AWS Region, and the action contained in the pre-signed URL.
DestinationRegion - The name of the AWS Region that Aurora Read Replica will be created in.
ReplicationSourceIdentifier - The DB cluster identifier for the encrypted DB cluster to be copied. This identifier must be in the Amazon Resource Name (ARN) format for the source AWS Region. For example, if you are copying an encrypted DB cluster from the us-west-2 AWS Region, then your ReplicationSourceIdentifier would look like Example: arn:aws:rds:us-west-2:123456789012:cluster:aurora-cluster1 .
To learn how to generate a Signature Version 4 signed request, see Authenticating Requests: Using Query Parameters (AWS Signature Version 4) and Signature Version 4 Signing Process .
Note
If you supply a value for this operation's SourceRegion parameter, a pre-signed URL will be calculated on your behalf.
boolean
True to enable mapping of AWS Identity and Access Management (IAM) accounts to database accounts, and otherwise false.
Default: false
integer
The target backtrack window, in seconds. To disable backtracking, set this value to 0.
Default: 0
Constraints:
If specified, this value must be set to a number from 0 to 259,200 (72 hours).
string
The ID of the region that contains the source for the read replica.
dict
Response Syntax
{
'DBCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'CharacterSetName': 'string',
'DatabaseName': 'string',
'DBClusterIdentifier': 'string',
'DBClusterParameterGroup': 'string',
'DBSubnetGroup': 'string',
'Status': 'string',
'PercentProgress': 'string',
'EarliestRestorableTime': datetime(2015, 1, 1),
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'MultiAZ': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'LatestRestorableTime': datetime(2015, 1, 1),
'Port': 123,
'MasterUsername': 'string',
'DBClusterOptionGroupMemberships': [
{
'DBClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReplicationSourceIdentifier': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'DBClusterMembers': [
{
'DBInstanceIdentifier': 'string',
'IsClusterWriter': True|False,
'DBClusterParameterGroupStatus': 'string',
'PromotionTier': 123
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'DBClusterArn': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'IAMDatabaseAuthenticationEnabled': True|False,
'CloneGroupId': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'EarliestBacktrackTime': datetime(2015, 1, 1),
'BacktrackWindow': 123,
'BacktrackConsumedChangeRecords': 123
}
}
Response Structure
(dict) --
DBCluster (dict) --
Contains the details of an Amazon RDS DB cluster.
This data type is used as a response element in the DescribeDBClusters action.
AllocatedStorage (integer) --
For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size is not fixed, but instead automatically adjusts as needed.
AvailabilityZones (list) --
Provides the list of EC2 Availability Zones that instances in the DB cluster can be created in.
(string) --
BackupRetentionPeriod (integer) --
Specifies the number of days for which automatic DB snapshots are retained.
CharacterSetName (string) --
If present, specifies the name of the character set that this cluster is associated with.
DatabaseName (string) --
Contains the name of the initial database of this DB cluster that was provided at create time, if one was specified when the DB cluster was created. This same name is returned for the life of the DB cluster.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
DBClusterParameterGroup (string) --
Specifies the name of the DB cluster parameter group for the DB cluster.
DBSubnetGroup (string) --
Specifies information on the subnet group associated with the DB cluster, including the name, description, and subnets in the subnet group.
Status (string) --
Specifies the current state of this DB cluster.
PercentProgress (string) --
Specifies the progress of the operation as a percentage.
EarliestRestorableTime (datetime) --
The earliest time to which a database can be restored with point-in-time restore.
Endpoint (string) --
Specifies the connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster. The reader endpoint for a DB cluster load-balances connections across the Aurora Replicas that are available in a DB cluster. As clients request new connections to the reader endpoint, Aurora distributes the connection requests among the Aurora Replicas in the DB cluster. This functionality can help balance your read workload across multiple Aurora Replicas in your DB cluster.
If a failover occurs, and the Aurora Replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Aurora Replicas in the cluster, you can then reconnect to the reader endpoint.
MultiAZ (boolean) --
Specifies whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
Provides the name of the database engine to be used for this DB cluster.
EngineVersion (string) --
Indicates the database engine version.
LatestRestorableTime (datetime) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Port (integer) --
Specifies the port that the database engine is listening on.
MasterUsername (string) --
Contains the master username for the DB cluster.
DBClusterOptionGroupMemberships (list) --
Provides the list of option group memberships for this DB cluster.
(dict) --
Contains status information for a DB cluster option group.
DBClusterOptionGroupName (string) --
Specifies the name of the DB cluster option group.
Status (string) --
Specifies the status of the DB cluster option group.
PreferredBackupWindow (string) --
Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod .
PreferredMaintenanceWindow (string) --
Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
ReplicationSourceIdentifier (string) --
Contains the identifier of the source DB cluster if this DB cluster is a Read Replica.
ReadReplicaIdentifiers (list) --
Contains one or more identifiers of the Read Replicas associated with this DB cluster.
(string) --
DBClusterMembers (list) --
Provides the list of instances that make up the DB cluster.
(dict) --
Contains information about an instance that is part of a DB cluster.
DBInstanceIdentifier (string) --
Specifies the instance identifier for this member of the DB cluster.
IsClusterWriter (boolean) --
Value that is true if the cluster member is the primary instance for the DB cluster and false otherwise.
DBClusterParameterGroupStatus (string) --
Specifies the status of the DB cluster parameter group for this member of the DB cluster.
PromotionTier (integer) --
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster .
VpcSecurityGroups (list) --
Provides a list of VPC security groups that the DB cluster belongs to.
(dict) --
This data type is used as a response element for queries on VPC security group membership.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Specifies whether the DB cluster is encrypted.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB cluster.
DbClusterResourceId (string) --
The AWS Region-unique, immutable identifier for the DB cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB cluster is accessed.
DBClusterArn (string) --
The Amazon Resource Name (ARN) for the DB cluster.
AssociatedRoles (list) --
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster. IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other AWS services on your behalf.
(dict) --
Describes an AWS Identity and Access Management (IAM) role that is associated with a DB cluster.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB cluster.
Status (string) --
Describes the state of association between the IAM role and the DB cluster. The Status property returns one of the following values:
ACTIVE - the IAM role ARN is associated with the DB cluster and can be used to access other AWS services on your behalf.
PENDING - the IAM role ARN is being associated with the DB cluster.
INVALID - the IAM role ARN is associated with the DB cluster, but the DB cluster is unable to assume the IAM role in order to access other AWS services on your behalf.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
CloneGroupId (string) --
Identifies the clone group to which the DB cluster is associated.
ClusterCreateTime (datetime) --
Specifies the time when the DB cluster was created, in Universal Coordinated Time (UTC).
EarliestBacktrackTime (datetime) --
The earliest time to which a DB cluster can be backtracked.
BacktrackWindow (integer) --
The target backtrack window, in seconds. If this value is set to 0, backtracking is disabled for the DB cluster. Otherwise, backtracking is enabled.
BacktrackConsumedChangeRecords (integer) --
The number of change records stored for Backtrack.
{'DBCluster': {'BacktrackConsumedChangeRecords': 'long',
'BacktrackWindow': 'long',
'EarliestBacktrackTime': 'timestamp'}}
The DeleteDBCluster action deletes a previously provisioned DB cluster. When you delete a DB cluster, all automated backups for that DB cluster are deleted and can't be recovered. Manual DB cluster snapshots of the specified DB cluster are not deleted.
For more information on Amazon Aurora, see Aurora on Amazon RDS in the Amazon RDS User Guide.
See also: AWS API Documentation
Request Syntax
client.delete_db_cluster(
DBClusterIdentifier='string',
SkipFinalSnapshot=True|False,
FinalDBSnapshotIdentifier='string'
)
string
[REQUIRED]
The DB cluster identifier for the DB cluster to be deleted. This parameter isn't case-sensitive.
Constraints:
Must match an existing DBClusterIdentifier.
boolean
Determines whether a final DB cluster snapshot is created before the DB cluster is deleted. If true is specified, no DB cluster snapshot is created. If false is specified, a DB cluster snapshot is created before the DB cluster is deleted.
Note
You must specify a FinalDBSnapshotIdentifier parameter if SkipFinalSnapshot is false .
Default: false
string
The DB cluster snapshot identifier of the new DB cluster snapshot created when SkipFinalSnapshot is set to false .
Note
Specifying this parameter and also setting the SkipFinalShapshot parameter to true results in an error.
Constraints:
Must be 1 to 255 letters, numbers, or hyphens.
First character must be a letter
Cannot end with a hyphen or contain two consecutive hyphens
dict
Response Syntax
{
'DBCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'CharacterSetName': 'string',
'DatabaseName': 'string',
'DBClusterIdentifier': 'string',
'DBClusterParameterGroup': 'string',
'DBSubnetGroup': 'string',
'Status': 'string',
'PercentProgress': 'string',
'EarliestRestorableTime': datetime(2015, 1, 1),
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'MultiAZ': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'LatestRestorableTime': datetime(2015, 1, 1),
'Port': 123,
'MasterUsername': 'string',
'DBClusterOptionGroupMemberships': [
{
'DBClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReplicationSourceIdentifier': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'DBClusterMembers': [
{
'DBInstanceIdentifier': 'string',
'IsClusterWriter': True|False,
'DBClusterParameterGroupStatus': 'string',
'PromotionTier': 123
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'DBClusterArn': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'IAMDatabaseAuthenticationEnabled': True|False,
'CloneGroupId': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'EarliestBacktrackTime': datetime(2015, 1, 1),
'BacktrackWindow': 123,
'BacktrackConsumedChangeRecords': 123
}
}
Response Structure
(dict) --
DBCluster (dict) --
Contains the details of an Amazon RDS DB cluster.
This data type is used as a response element in the DescribeDBClusters action.
AllocatedStorage (integer) --
For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size is not fixed, but instead automatically adjusts as needed.
AvailabilityZones (list) --
Provides the list of EC2 Availability Zones that instances in the DB cluster can be created in.
(string) --
BackupRetentionPeriod (integer) --
Specifies the number of days for which automatic DB snapshots are retained.
CharacterSetName (string) --
If present, specifies the name of the character set that this cluster is associated with.
DatabaseName (string) --
Contains the name of the initial database of this DB cluster that was provided at create time, if one was specified when the DB cluster was created. This same name is returned for the life of the DB cluster.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
DBClusterParameterGroup (string) --
Specifies the name of the DB cluster parameter group for the DB cluster.
DBSubnetGroup (string) --
Specifies information on the subnet group associated with the DB cluster, including the name, description, and subnets in the subnet group.
Status (string) --
Specifies the current state of this DB cluster.
PercentProgress (string) --
Specifies the progress of the operation as a percentage.
EarliestRestorableTime (datetime) --
The earliest time to which a database can be restored with point-in-time restore.
Endpoint (string) --
Specifies the connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster. The reader endpoint for a DB cluster load-balances connections across the Aurora Replicas that are available in a DB cluster. As clients request new connections to the reader endpoint, Aurora distributes the connection requests among the Aurora Replicas in the DB cluster. This functionality can help balance your read workload across multiple Aurora Replicas in your DB cluster.
If a failover occurs, and the Aurora Replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Aurora Replicas in the cluster, you can then reconnect to the reader endpoint.
MultiAZ (boolean) --
Specifies whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
Provides the name of the database engine to be used for this DB cluster.
EngineVersion (string) --
Indicates the database engine version.
LatestRestorableTime (datetime) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Port (integer) --
Specifies the port that the database engine is listening on.
MasterUsername (string) --
Contains the master username for the DB cluster.
DBClusterOptionGroupMemberships (list) --
Provides the list of option group memberships for this DB cluster.
(dict) --
Contains status information for a DB cluster option group.
DBClusterOptionGroupName (string) --
Specifies the name of the DB cluster option group.
Status (string) --
Specifies the status of the DB cluster option group.
PreferredBackupWindow (string) --
Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod .
PreferredMaintenanceWindow (string) --
Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
ReplicationSourceIdentifier (string) --
Contains the identifier of the source DB cluster if this DB cluster is a Read Replica.
ReadReplicaIdentifiers (list) --
Contains one or more identifiers of the Read Replicas associated with this DB cluster.
(string) --
DBClusterMembers (list) --
Provides the list of instances that make up the DB cluster.
(dict) --
Contains information about an instance that is part of a DB cluster.
DBInstanceIdentifier (string) --
Specifies the instance identifier for this member of the DB cluster.
IsClusterWriter (boolean) --
Value that is true if the cluster member is the primary instance for the DB cluster and false otherwise.
DBClusterParameterGroupStatus (string) --
Specifies the status of the DB cluster parameter group for this member of the DB cluster.
PromotionTier (integer) --
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster .
VpcSecurityGroups (list) --
Provides a list of VPC security groups that the DB cluster belongs to.
(dict) --
This data type is used as a response element for queries on VPC security group membership.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Specifies whether the DB cluster is encrypted.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB cluster.
DbClusterResourceId (string) --
The AWS Region-unique, immutable identifier for the DB cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB cluster is accessed.
DBClusterArn (string) --
The Amazon Resource Name (ARN) for the DB cluster.
AssociatedRoles (list) --
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster. IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other AWS services on your behalf.
(dict) --
Describes an AWS Identity and Access Management (IAM) role that is associated with a DB cluster.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB cluster.
Status (string) --
Describes the state of association between the IAM role and the DB cluster. The Status property returns one of the following values:
ACTIVE - the IAM role ARN is associated with the DB cluster and can be used to access other AWS services on your behalf.
PENDING - the IAM role ARN is being associated with the DB cluster.
INVALID - the IAM role ARN is associated with the DB cluster, but the DB cluster is unable to assume the IAM role in order to access other AWS services on your behalf.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
CloneGroupId (string) --
Identifies the clone group to which the DB cluster is associated.
ClusterCreateTime (datetime) --
Specifies the time when the DB cluster was created, in Universal Coordinated Time (UTC).
EarliestBacktrackTime (datetime) --
The earliest time to which a DB cluster can be backtracked.
BacktrackWindow (integer) --
The target backtrack window, in seconds. If this value is set to 0, backtracking is disabled for the DB cluster. Otherwise, backtracking is enabled.
BacktrackConsumedChangeRecords (integer) --
The number of change records stored for Backtrack.
{'DBClusters': {'BacktrackConsumedChangeRecords': 'long',
'BacktrackWindow': 'long',
'EarliestBacktrackTime': 'timestamp'}}
Returns information about provisioned Aurora DB clusters. This API supports pagination.
For more information on Amazon Aurora, see Aurora on Amazon RDS in the Amazon RDS User Guide.
See also: AWS API Documentation
Request Syntax
client.describe_db_clusters(
DBClusterIdentifier='string',
Filters=[
{
'Name': 'string',
'Values': [
'string',
]
},
],
MaxRecords=123,
Marker='string'
)
string
The user-supplied DB cluster identifier. If this parameter is specified, information from only the specific DB cluster is returned. This parameter isn't case-sensitive.
Constraints:
If supplied, must match an existing DBClusterIdentifier.
list
A filter that specifies one or more DB clusters to describe.
Supported filters:
db-cluster-id - Accepts DB cluster identifiers and DB cluster Amazon Resource Names (ARNs). The results list will only include information about the DB clusters identified by these ARNs.
(dict) --
A filter name and value pair that is used to return a more specific list of results from a describe operation. Filters can be used to match a set of resources by specific criteria, such as IDs. The filters supported by a describe operation are documented with the describe operation.
Note
Currently, wildcards are not supported in filters.
The following actions can be filtered:
DescribeDBClusterBacktracks
DescribeDBClusters
DescribeDBInstances
DescribePendingMaintenanceActions
Name (string) -- [REQUIRED]
The name of the filter. Filter names are case-sensitive.
Values (list) -- [REQUIRED]
One or more filter values. Filter values are case-sensitive.
(string) --
integer
The maximum number of records to include in the response. If more records exist than the specified MaxRecords value, a pagination token called a marker is included in the response so that the remaining results can be retrieved.
Default: 100
Constraints: Minimum 20, maximum 100.
string
An optional pagination token provided by a previous DescribeDBClusters request. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by MaxRecords .
dict
Response Syntax
{
'Marker': 'string',
'DBClusters': [
{
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'CharacterSetName': 'string',
'DatabaseName': 'string',
'DBClusterIdentifier': 'string',
'DBClusterParameterGroup': 'string',
'DBSubnetGroup': 'string',
'Status': 'string',
'PercentProgress': 'string',
'EarliestRestorableTime': datetime(2015, 1, 1),
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'MultiAZ': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'LatestRestorableTime': datetime(2015, 1, 1),
'Port': 123,
'MasterUsername': 'string',
'DBClusterOptionGroupMemberships': [
{
'DBClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReplicationSourceIdentifier': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'DBClusterMembers': [
{
'DBInstanceIdentifier': 'string',
'IsClusterWriter': True|False,
'DBClusterParameterGroupStatus': 'string',
'PromotionTier': 123
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'DBClusterArn': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'IAMDatabaseAuthenticationEnabled': True|False,
'CloneGroupId': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'EarliestBacktrackTime': datetime(2015, 1, 1),
'BacktrackWindow': 123,
'BacktrackConsumedChangeRecords': 123
},
]
}
Response Structure
(dict) --
Contains the result of a successful invocation of the DescribeDBClusters action.
Marker (string) --
A pagination token that can be used in a subsequent DescribeDBClusters request.
DBClusters (list) --
Contains a list of DB clusters for the user.
(dict) --
Contains the details of an Amazon RDS DB cluster.
This data type is used as a response element in the DescribeDBClusters action.
AllocatedStorage (integer) --
For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size is not fixed, but instead automatically adjusts as needed.
AvailabilityZones (list) --
Provides the list of EC2 Availability Zones that instances in the DB cluster can be created in.
(string) --
BackupRetentionPeriod (integer) --
Specifies the number of days for which automatic DB snapshots are retained.
CharacterSetName (string) --
If present, specifies the name of the character set that this cluster is associated with.
DatabaseName (string) --
Contains the name of the initial database of this DB cluster that was provided at create time, if one was specified when the DB cluster was created. This same name is returned for the life of the DB cluster.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
DBClusterParameterGroup (string) --
Specifies the name of the DB cluster parameter group for the DB cluster.
DBSubnetGroup (string) --
Specifies information on the subnet group associated with the DB cluster, including the name, description, and subnets in the subnet group.
Status (string) --
Specifies the current state of this DB cluster.
PercentProgress (string) --
Specifies the progress of the operation as a percentage.
EarliestRestorableTime (datetime) --
The earliest time to which a database can be restored with point-in-time restore.
Endpoint (string) --
Specifies the connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster. The reader endpoint for a DB cluster load-balances connections across the Aurora Replicas that are available in a DB cluster. As clients request new connections to the reader endpoint, Aurora distributes the connection requests among the Aurora Replicas in the DB cluster. This functionality can help balance your read workload across multiple Aurora Replicas in your DB cluster.
If a failover occurs, and the Aurora Replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Aurora Replicas in the cluster, you can then reconnect to the reader endpoint.
MultiAZ (boolean) --
Specifies whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
Provides the name of the database engine to be used for this DB cluster.
EngineVersion (string) --
Indicates the database engine version.
LatestRestorableTime (datetime) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Port (integer) --
Specifies the port that the database engine is listening on.
MasterUsername (string) --
Contains the master username for the DB cluster.
DBClusterOptionGroupMemberships (list) --
Provides the list of option group memberships for this DB cluster.
(dict) --
Contains status information for a DB cluster option group.
DBClusterOptionGroupName (string) --
Specifies the name of the DB cluster option group.
Status (string) --
Specifies the status of the DB cluster option group.
PreferredBackupWindow (string) --
Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod .
PreferredMaintenanceWindow (string) --
Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
ReplicationSourceIdentifier (string) --
Contains the identifier of the source DB cluster if this DB cluster is a Read Replica.
ReadReplicaIdentifiers (list) --
Contains one or more identifiers of the Read Replicas associated with this DB cluster.
(string) --
DBClusterMembers (list) --
Provides the list of instances that make up the DB cluster.
(dict) --
Contains information about an instance that is part of a DB cluster.
DBInstanceIdentifier (string) --
Specifies the instance identifier for this member of the DB cluster.
IsClusterWriter (boolean) --
Value that is true if the cluster member is the primary instance for the DB cluster and false otherwise.
DBClusterParameterGroupStatus (string) --
Specifies the status of the DB cluster parameter group for this member of the DB cluster.
PromotionTier (integer) --
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster .
VpcSecurityGroups (list) --
Provides a list of VPC security groups that the DB cluster belongs to.
(dict) --
This data type is used as a response element for queries on VPC security group membership.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Specifies whether the DB cluster is encrypted.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB cluster.
DbClusterResourceId (string) --
The AWS Region-unique, immutable identifier for the DB cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB cluster is accessed.
DBClusterArn (string) --
The Amazon Resource Name (ARN) for the DB cluster.
AssociatedRoles (list) --
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster. IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other AWS services on your behalf.
(dict) --
Describes an AWS Identity and Access Management (IAM) role that is associated with a DB cluster.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB cluster.
Status (string) --
Describes the state of association between the IAM role and the DB cluster. The Status property returns one of the following values:
ACTIVE - the IAM role ARN is associated with the DB cluster and can be used to access other AWS services on your behalf.
PENDING - the IAM role ARN is being associated with the DB cluster.
INVALID - the IAM role ARN is associated with the DB cluster, but the DB cluster is unable to assume the IAM role in order to access other AWS services on your behalf.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
CloneGroupId (string) --
Identifies the clone group to which the DB cluster is associated.
ClusterCreateTime (datetime) --
Specifies the time when the DB cluster was created, in Universal Coordinated Time (UTC).
EarliestBacktrackTime (datetime) --
The earliest time to which a DB cluster can be backtracked.
BacktrackWindow (integer) --
The target backtrack window, in seconds. If this value is set to 0, backtracking is disabled for the DB cluster. Otherwise, backtracking is enabled.
BacktrackConsumedChangeRecords (integer) --
The number of change records stored for Backtrack.
{'DBCluster': {'BacktrackConsumedChangeRecords': 'long',
'BacktrackWindow': 'long',
'EarliestBacktrackTime': 'timestamp'}}
Forces a failover for a DB cluster.
A failover for a DB cluster promotes one of the Aurora Replicas (read-only instances) in the DB cluster to be the primary instance (the cluster writer).
Amazon Aurora will automatically fail over to an Aurora Replica, if one exists, when the primary instance fails. You can force a failover when you want to simulate a failure of a primary instance for testing. Because each instance in a DB cluster has its own endpoint address, you will need to clean up and re-establish any existing connections that use those endpoint addresses when the failover is complete.
For more information on Amazon Aurora, see Aurora on Amazon RDS in the Amazon RDS User Guide.
See also: AWS API Documentation
Request Syntax
client.failover_db_cluster(
DBClusterIdentifier='string',
TargetDBInstanceIdentifier='string'
)
string
A DB cluster identifier to force a failover for. This parameter is not case-sensitive.
Constraints:
Must match the identifier of an existing DBCluster.
string
The name of the instance to promote to the primary instance.
You must specify the instance identifier for an Aurora Replica in the DB cluster. For example, mydbcluster-replica1 .
dict
Response Syntax
{
'DBCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'CharacterSetName': 'string',
'DatabaseName': 'string',
'DBClusterIdentifier': 'string',
'DBClusterParameterGroup': 'string',
'DBSubnetGroup': 'string',
'Status': 'string',
'PercentProgress': 'string',
'EarliestRestorableTime': datetime(2015, 1, 1),
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'MultiAZ': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'LatestRestorableTime': datetime(2015, 1, 1),
'Port': 123,
'MasterUsername': 'string',
'DBClusterOptionGroupMemberships': [
{
'DBClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReplicationSourceIdentifier': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'DBClusterMembers': [
{
'DBInstanceIdentifier': 'string',
'IsClusterWriter': True|False,
'DBClusterParameterGroupStatus': 'string',
'PromotionTier': 123
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'DBClusterArn': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'IAMDatabaseAuthenticationEnabled': True|False,
'CloneGroupId': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'EarliestBacktrackTime': datetime(2015, 1, 1),
'BacktrackWindow': 123,
'BacktrackConsumedChangeRecords': 123
}
}
Response Structure
(dict) --
DBCluster (dict) --
Contains the details of an Amazon RDS DB cluster.
This data type is used as a response element in the DescribeDBClusters action.
AllocatedStorage (integer) --
For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size is not fixed, but instead automatically adjusts as needed.
AvailabilityZones (list) --
Provides the list of EC2 Availability Zones that instances in the DB cluster can be created in.
(string) --
BackupRetentionPeriod (integer) --
Specifies the number of days for which automatic DB snapshots are retained.
CharacterSetName (string) --
If present, specifies the name of the character set that this cluster is associated with.
DatabaseName (string) --
Contains the name of the initial database of this DB cluster that was provided at create time, if one was specified when the DB cluster was created. This same name is returned for the life of the DB cluster.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
DBClusterParameterGroup (string) --
Specifies the name of the DB cluster parameter group for the DB cluster.
DBSubnetGroup (string) --
Specifies information on the subnet group associated with the DB cluster, including the name, description, and subnets in the subnet group.
Status (string) --
Specifies the current state of this DB cluster.
PercentProgress (string) --
Specifies the progress of the operation as a percentage.
EarliestRestorableTime (datetime) --
The earliest time to which a database can be restored with point-in-time restore.
Endpoint (string) --
Specifies the connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster. The reader endpoint for a DB cluster load-balances connections across the Aurora Replicas that are available in a DB cluster. As clients request new connections to the reader endpoint, Aurora distributes the connection requests among the Aurora Replicas in the DB cluster. This functionality can help balance your read workload across multiple Aurora Replicas in your DB cluster.
If a failover occurs, and the Aurora Replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Aurora Replicas in the cluster, you can then reconnect to the reader endpoint.
MultiAZ (boolean) --
Specifies whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
Provides the name of the database engine to be used for this DB cluster.
EngineVersion (string) --
Indicates the database engine version.
LatestRestorableTime (datetime) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Port (integer) --
Specifies the port that the database engine is listening on.
MasterUsername (string) --
Contains the master username for the DB cluster.
DBClusterOptionGroupMemberships (list) --
Provides the list of option group memberships for this DB cluster.
(dict) --
Contains status information for a DB cluster option group.
DBClusterOptionGroupName (string) --
Specifies the name of the DB cluster option group.
Status (string) --
Specifies the status of the DB cluster option group.
PreferredBackupWindow (string) --
Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod .
PreferredMaintenanceWindow (string) --
Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
ReplicationSourceIdentifier (string) --
Contains the identifier of the source DB cluster if this DB cluster is a Read Replica.
ReadReplicaIdentifiers (list) --
Contains one or more identifiers of the Read Replicas associated with this DB cluster.
(string) --
DBClusterMembers (list) --
Provides the list of instances that make up the DB cluster.
(dict) --
Contains information about an instance that is part of a DB cluster.
DBInstanceIdentifier (string) --
Specifies the instance identifier for this member of the DB cluster.
IsClusterWriter (boolean) --
Value that is true if the cluster member is the primary instance for the DB cluster and false otherwise.
DBClusterParameterGroupStatus (string) --
Specifies the status of the DB cluster parameter group for this member of the DB cluster.
PromotionTier (integer) --
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster .
VpcSecurityGroups (list) --
Provides a list of VPC security groups that the DB cluster belongs to.
(dict) --
This data type is used as a response element for queries on VPC security group membership.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Specifies whether the DB cluster is encrypted.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB cluster.
DbClusterResourceId (string) --
The AWS Region-unique, immutable identifier for the DB cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB cluster is accessed.
DBClusterArn (string) --
The Amazon Resource Name (ARN) for the DB cluster.
AssociatedRoles (list) --
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster. IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other AWS services on your behalf.
(dict) --
Describes an AWS Identity and Access Management (IAM) role that is associated with a DB cluster.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB cluster.
Status (string) --
Describes the state of association between the IAM role and the DB cluster. The Status property returns one of the following values:
ACTIVE - the IAM role ARN is associated with the DB cluster and can be used to access other AWS services on your behalf.
PENDING - the IAM role ARN is being associated with the DB cluster.
INVALID - the IAM role ARN is associated with the DB cluster, but the DB cluster is unable to assume the IAM role in order to access other AWS services on your behalf.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
CloneGroupId (string) --
Identifies the clone group to which the DB cluster is associated.
ClusterCreateTime (datetime) --
Specifies the time when the DB cluster was created, in Universal Coordinated Time (UTC).
EarliestBacktrackTime (datetime) --
The earliest time to which a DB cluster can be backtracked.
BacktrackWindow (integer) --
The target backtrack window, in seconds. If this value is set to 0, backtracking is disabled for the DB cluster. Otherwise, backtracking is enabled.
BacktrackConsumedChangeRecords (integer) --
The number of change records stored for Backtrack.
{'BacktrackWindow': 'long'}
Response {'DBCluster': {'BacktrackConsumedChangeRecords': 'long',
'BacktrackWindow': 'long',
'EarliestBacktrackTime': 'timestamp'}}
Modify a setting for an Amazon Aurora DB cluster. You can change one or more database configuration parameters by specifying these parameters and the new values in the request. For more information on Amazon Aurora, see Aurora on Amazon RDS in the Amazon RDS User Guide.
See also: AWS API Documentation
Request Syntax
client.modify_db_cluster(
DBClusterIdentifier='string',
NewDBClusterIdentifier='string',
ApplyImmediately=True|False,
BackupRetentionPeriod=123,
DBClusterParameterGroupName='string',
VpcSecurityGroupIds=[
'string',
],
Port=123,
MasterUserPassword='string',
OptionGroupName='string',
PreferredBackupWindow='string',
PreferredMaintenanceWindow='string',
EnableIAMDatabaseAuthentication=True|False,
BacktrackWindow=123,
EngineVersion='string'
)
string
[REQUIRED]
The DB cluster identifier for the cluster being modified. This parameter is not case-sensitive.
Constraints:
Must match the identifier of an existing DBCluster.
string
The new DB cluster identifier for the DB cluster when renaming a DB cluster. This value is stored as a lowercase string.
Constraints:
Must contain from 1 to 63 letters, numbers, or hyphens
The first character must be a letter
Cannot end with a hyphen or contain two consecutive hyphens
Example: my-cluster2
boolean
A value that specifies whether the modifications in this request and any pending modifications are asynchronously applied as soon as possible, regardless of the PreferredMaintenanceWindow setting for the DB cluster. If this parameter is set to false , changes to the DB cluster are applied during the next maintenance window.
The ApplyImmediately parameter only affects the NewDBClusterIdentifier and MasterUserPassword values. If you set the ApplyImmediately parameter value to false, then changes to the NewDBClusterIdentifier and MasterUserPassword values are applied during the next maintenance window. All other changes are applied immediately, regardless of the value of the ApplyImmediately parameter.
Default: false
integer
The number of days for which automated backups are retained. You must specify a minimum value of 1.
Default: 1
Constraints:
Must be a value from 1 to 35
string
The name of the DB cluster parameter group to use for the DB cluster.
list
A list of VPC security groups that the DB cluster will belong to.
(string) --
integer
The port number on which the DB cluster accepts connections.
Constraints: Value must be 1150-65535
Default: The same port as the original DB cluster.
string
The new password for the master database user. This password can contain any printable ASCII character except "/", """, or "@".
Constraints: Must contain from 8 to 41 characters.
string
A value that indicates that the DB cluster should be associated with the specified option group. Changing this parameter doesn't result in an outage except in the following case, and the change is applied during the next maintenance window unless the ApplyImmediately parameter is set to true for this request. If the parameter change results in an option group that enables OEM, this change can cause a brief (sub-second) period during which new connections are rejected but existing connections are not interrupted.
Permanent options can't be removed from an option group. The option group can't be removed from a DB cluster once it is associated with a DB cluster.
string
The daily time range during which automated backups are created if automated backups are enabled, using the BackupRetentionPeriod parameter.
The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region. To see the time blocks available, see Adjusting the Preferred Maintenance Window in the Amazon RDS User Guide.
Constraints:
Must be in the format hh24:mi-hh24:mi .
Must be in Universal Coordinated Time (UTC).
Must not conflict with the preferred maintenance window.
Must be at least 30 minutes.
string
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Format: ddd:hh24:mi-ddd:hh24:mi
The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred Maintenance Window in the Amazon RDS User Guide.
Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.
Constraints: Minimum 30-minute window.
boolean
True to enable mapping of AWS Identity and Access Management (IAM) accounts to database accounts, and otherwise false.
Default: false
integer
The target backtrack window, in seconds. To disable backtracking, set this value to 0.
Default: 0
Constraints:
If specified, this value must be set to a number from 0 to 259,200 (72 hours).
string
The version number of the database engine to which you want to upgrade. Changing this parameter results in an outage. The change is applied during the next maintenance window unless the ApplyImmediately parameter is set to true.
For a list of valid engine versions, see CreateDBInstance , or call DescribeDBEngineVersions .
dict
Response Syntax
{
'DBCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'CharacterSetName': 'string',
'DatabaseName': 'string',
'DBClusterIdentifier': 'string',
'DBClusterParameterGroup': 'string',
'DBSubnetGroup': 'string',
'Status': 'string',
'PercentProgress': 'string',
'EarliestRestorableTime': datetime(2015, 1, 1),
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'MultiAZ': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'LatestRestorableTime': datetime(2015, 1, 1),
'Port': 123,
'MasterUsername': 'string',
'DBClusterOptionGroupMemberships': [
{
'DBClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReplicationSourceIdentifier': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'DBClusterMembers': [
{
'DBInstanceIdentifier': 'string',
'IsClusterWriter': True|False,
'DBClusterParameterGroupStatus': 'string',
'PromotionTier': 123
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'DBClusterArn': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'IAMDatabaseAuthenticationEnabled': True|False,
'CloneGroupId': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'EarliestBacktrackTime': datetime(2015, 1, 1),
'BacktrackWindow': 123,
'BacktrackConsumedChangeRecords': 123
}
}
Response Structure
(dict) --
DBCluster (dict) --
Contains the details of an Amazon RDS DB cluster.
This data type is used as a response element in the DescribeDBClusters action.
AllocatedStorage (integer) --
For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size is not fixed, but instead automatically adjusts as needed.
AvailabilityZones (list) --
Provides the list of EC2 Availability Zones that instances in the DB cluster can be created in.
(string) --
BackupRetentionPeriod (integer) --
Specifies the number of days for which automatic DB snapshots are retained.
CharacterSetName (string) --
If present, specifies the name of the character set that this cluster is associated with.
DatabaseName (string) --
Contains the name of the initial database of this DB cluster that was provided at create time, if one was specified when the DB cluster was created. This same name is returned for the life of the DB cluster.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
DBClusterParameterGroup (string) --
Specifies the name of the DB cluster parameter group for the DB cluster.
DBSubnetGroup (string) --
Specifies information on the subnet group associated with the DB cluster, including the name, description, and subnets in the subnet group.
Status (string) --
Specifies the current state of this DB cluster.
PercentProgress (string) --
Specifies the progress of the operation as a percentage.
EarliestRestorableTime (datetime) --
The earliest time to which a database can be restored with point-in-time restore.
Endpoint (string) --
Specifies the connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster. The reader endpoint for a DB cluster load-balances connections across the Aurora Replicas that are available in a DB cluster. As clients request new connections to the reader endpoint, Aurora distributes the connection requests among the Aurora Replicas in the DB cluster. This functionality can help balance your read workload across multiple Aurora Replicas in your DB cluster.
If a failover occurs, and the Aurora Replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Aurora Replicas in the cluster, you can then reconnect to the reader endpoint.
MultiAZ (boolean) --
Specifies whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
Provides the name of the database engine to be used for this DB cluster.
EngineVersion (string) --
Indicates the database engine version.
LatestRestorableTime (datetime) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Port (integer) --
Specifies the port that the database engine is listening on.
MasterUsername (string) --
Contains the master username for the DB cluster.
DBClusterOptionGroupMemberships (list) --
Provides the list of option group memberships for this DB cluster.
(dict) --
Contains status information for a DB cluster option group.
DBClusterOptionGroupName (string) --
Specifies the name of the DB cluster option group.
Status (string) --
Specifies the status of the DB cluster option group.
PreferredBackupWindow (string) --
Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod .
PreferredMaintenanceWindow (string) --
Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
ReplicationSourceIdentifier (string) --
Contains the identifier of the source DB cluster if this DB cluster is a Read Replica.
ReadReplicaIdentifiers (list) --
Contains one or more identifiers of the Read Replicas associated with this DB cluster.
(string) --
DBClusterMembers (list) --
Provides the list of instances that make up the DB cluster.
(dict) --
Contains information about an instance that is part of a DB cluster.
DBInstanceIdentifier (string) --
Specifies the instance identifier for this member of the DB cluster.
IsClusterWriter (boolean) --
Value that is true if the cluster member is the primary instance for the DB cluster and false otherwise.
DBClusterParameterGroupStatus (string) --
Specifies the status of the DB cluster parameter group for this member of the DB cluster.
PromotionTier (integer) --
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster .
VpcSecurityGroups (list) --
Provides a list of VPC security groups that the DB cluster belongs to.
(dict) --
This data type is used as a response element for queries on VPC security group membership.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Specifies whether the DB cluster is encrypted.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB cluster.
DbClusterResourceId (string) --
The AWS Region-unique, immutable identifier for the DB cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB cluster is accessed.
DBClusterArn (string) --
The Amazon Resource Name (ARN) for the DB cluster.
AssociatedRoles (list) --
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster. IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other AWS services on your behalf.
(dict) --
Describes an AWS Identity and Access Management (IAM) role that is associated with a DB cluster.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB cluster.
Status (string) --
Describes the state of association between the IAM role and the DB cluster. The Status property returns one of the following values:
ACTIVE - the IAM role ARN is associated with the DB cluster and can be used to access other AWS services on your behalf.
PENDING - the IAM role ARN is being associated with the DB cluster.
INVALID - the IAM role ARN is associated with the DB cluster, but the DB cluster is unable to assume the IAM role in order to access other AWS services on your behalf.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
CloneGroupId (string) --
Identifies the clone group to which the DB cluster is associated.
ClusterCreateTime (datetime) --
Specifies the time when the DB cluster was created, in Universal Coordinated Time (UTC).
EarliestBacktrackTime (datetime) --
The earliest time to which a DB cluster can be backtracked.
BacktrackWindow (integer) --
The target backtrack window, in seconds. If this value is set to 0, backtracking is disabled for the DB cluster. Otherwise, backtracking is enabled.
BacktrackConsumedChangeRecords (integer) --
The number of change records stored for Backtrack.
{'DBCluster': {'BacktrackConsumedChangeRecords': 'long',
'BacktrackWindow': 'long',
'EarliestBacktrackTime': 'timestamp'}}
Promotes a Read Replica DB cluster to a standalone DB cluster.
See also: AWS API Documentation
Request Syntax
client.promote_read_replica_db_cluster(
DBClusterIdentifier='string'
)
string
[REQUIRED]
The identifier of the DB cluster Read Replica to promote. This parameter is not case-sensitive.
Constraints:
Must match the identifier of an existing DBCluster Read Replica.
Example: my-cluster-replica1
dict
Response Syntax
{
'DBCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'CharacterSetName': 'string',
'DatabaseName': 'string',
'DBClusterIdentifier': 'string',
'DBClusterParameterGroup': 'string',
'DBSubnetGroup': 'string',
'Status': 'string',
'PercentProgress': 'string',
'EarliestRestorableTime': datetime(2015, 1, 1),
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'MultiAZ': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'LatestRestorableTime': datetime(2015, 1, 1),
'Port': 123,
'MasterUsername': 'string',
'DBClusterOptionGroupMemberships': [
{
'DBClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReplicationSourceIdentifier': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'DBClusterMembers': [
{
'DBInstanceIdentifier': 'string',
'IsClusterWriter': True|False,
'DBClusterParameterGroupStatus': 'string',
'PromotionTier': 123
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'DBClusterArn': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'IAMDatabaseAuthenticationEnabled': True|False,
'CloneGroupId': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'EarliestBacktrackTime': datetime(2015, 1, 1),
'BacktrackWindow': 123,
'BacktrackConsumedChangeRecords': 123
}
}
Response Structure
(dict) --
DBCluster (dict) --
Contains the details of an Amazon RDS DB cluster.
This data type is used as a response element in the DescribeDBClusters action.
AllocatedStorage (integer) --
For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size is not fixed, but instead automatically adjusts as needed.
AvailabilityZones (list) --
Provides the list of EC2 Availability Zones that instances in the DB cluster can be created in.
(string) --
BackupRetentionPeriod (integer) --
Specifies the number of days for which automatic DB snapshots are retained.
CharacterSetName (string) --
If present, specifies the name of the character set that this cluster is associated with.
DatabaseName (string) --
Contains the name of the initial database of this DB cluster that was provided at create time, if one was specified when the DB cluster was created. This same name is returned for the life of the DB cluster.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
DBClusterParameterGroup (string) --
Specifies the name of the DB cluster parameter group for the DB cluster.
DBSubnetGroup (string) --
Specifies information on the subnet group associated with the DB cluster, including the name, description, and subnets in the subnet group.
Status (string) --
Specifies the current state of this DB cluster.
PercentProgress (string) --
Specifies the progress of the operation as a percentage.
EarliestRestorableTime (datetime) --
The earliest time to which a database can be restored with point-in-time restore.
Endpoint (string) --
Specifies the connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster. The reader endpoint for a DB cluster load-balances connections across the Aurora Replicas that are available in a DB cluster. As clients request new connections to the reader endpoint, Aurora distributes the connection requests among the Aurora Replicas in the DB cluster. This functionality can help balance your read workload across multiple Aurora Replicas in your DB cluster.
If a failover occurs, and the Aurora Replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Aurora Replicas in the cluster, you can then reconnect to the reader endpoint.
MultiAZ (boolean) --
Specifies whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
Provides the name of the database engine to be used for this DB cluster.
EngineVersion (string) --
Indicates the database engine version.
LatestRestorableTime (datetime) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Port (integer) --
Specifies the port that the database engine is listening on.
MasterUsername (string) --
Contains the master username for the DB cluster.
DBClusterOptionGroupMemberships (list) --
Provides the list of option group memberships for this DB cluster.
(dict) --
Contains status information for a DB cluster option group.
DBClusterOptionGroupName (string) --
Specifies the name of the DB cluster option group.
Status (string) --
Specifies the status of the DB cluster option group.
PreferredBackupWindow (string) --
Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod .
PreferredMaintenanceWindow (string) --
Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
ReplicationSourceIdentifier (string) --
Contains the identifier of the source DB cluster if this DB cluster is a Read Replica.
ReadReplicaIdentifiers (list) --
Contains one or more identifiers of the Read Replicas associated with this DB cluster.
(string) --
DBClusterMembers (list) --
Provides the list of instances that make up the DB cluster.
(dict) --
Contains information about an instance that is part of a DB cluster.
DBInstanceIdentifier (string) --
Specifies the instance identifier for this member of the DB cluster.
IsClusterWriter (boolean) --
Value that is true if the cluster member is the primary instance for the DB cluster and false otherwise.
DBClusterParameterGroupStatus (string) --
Specifies the status of the DB cluster parameter group for this member of the DB cluster.
PromotionTier (integer) --
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster .
VpcSecurityGroups (list) --
Provides a list of VPC security groups that the DB cluster belongs to.
(dict) --
This data type is used as a response element for queries on VPC security group membership.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Specifies whether the DB cluster is encrypted.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB cluster.
DbClusterResourceId (string) --
The AWS Region-unique, immutable identifier for the DB cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB cluster is accessed.
DBClusterArn (string) --
The Amazon Resource Name (ARN) for the DB cluster.
AssociatedRoles (list) --
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster. IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other AWS services on your behalf.
(dict) --
Describes an AWS Identity and Access Management (IAM) role that is associated with a DB cluster.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB cluster.
Status (string) --
Describes the state of association between the IAM role and the DB cluster. The Status property returns one of the following values:
ACTIVE - the IAM role ARN is associated with the DB cluster and can be used to access other AWS services on your behalf.
PENDING - the IAM role ARN is being associated with the DB cluster.
INVALID - the IAM role ARN is associated with the DB cluster, but the DB cluster is unable to assume the IAM role in order to access other AWS services on your behalf.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
CloneGroupId (string) --
Identifies the clone group to which the DB cluster is associated.
ClusterCreateTime (datetime) --
Specifies the time when the DB cluster was created, in Universal Coordinated Time (UTC).
EarliestBacktrackTime (datetime) --
The earliest time to which a DB cluster can be backtracked.
BacktrackWindow (integer) --
The target backtrack window, in seconds. If this value is set to 0, backtracking is disabled for the DB cluster. Otherwise, backtracking is enabled.
BacktrackConsumedChangeRecords (integer) --
The number of change records stored for Backtrack.
{'BacktrackWindow': 'long'}
Response {'DBCluster': {'BacktrackConsumedChangeRecords': 'long',
'BacktrackWindow': 'long',
'EarliestBacktrackTime': 'timestamp'}}
Creates an Amazon Aurora DB cluster from data stored in an Amazon S3 bucket. Amazon RDS must be authorized to access the Amazon S3 bucket and the data must be created using the Percona XtraBackup utility as described in Migrating Data from MySQL by Using an Amazon S3 Bucket .
See also: AWS API Documentation
Request Syntax
client.restore_db_cluster_from_s3(
AvailabilityZones=[
'string',
],
BackupRetentionPeriod=123,
CharacterSetName='string',
DatabaseName='string',
DBClusterIdentifier='string',
DBClusterParameterGroupName='string',
VpcSecurityGroupIds=[
'string',
],
DBSubnetGroupName='string',
Engine='string',
EngineVersion='string',
Port=123,
MasterUsername='string',
MasterUserPassword='string',
OptionGroupName='string',
PreferredBackupWindow='string',
PreferredMaintenanceWindow='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
StorageEncrypted=True|False,
KmsKeyId='string',
EnableIAMDatabaseAuthentication=True|False,
SourceEngine='string',
SourceEngineVersion='string',
S3BucketName='string',
S3Prefix='string',
S3IngestionRoleArn='string',
BacktrackWindow=123
)
list
A list of EC2 Availability Zones that instances in the restored DB cluster can be created in.
(string) --
integer
The number of days for which automated backups of the restored DB cluster are retained. You must specify a minimum value of 1.
Default: 1
Constraints:
Must be a value from 1 to 35
string
A value that indicates that the restored DB cluster should be associated with the specified CharacterSet.
string
The database name for the restored DB cluster.
string
[REQUIRED]
The name of the DB cluster to create from the source data in the Amazon S3 bucket. This parameter is isn't case-sensitive.
Constraints:
Must contain from 1 to 63 letters, numbers, or hyphens.
First character must be a letter.
Cannot end with a hyphen or contain two consecutive hyphens.
Example: my-cluster1
string
The name of the DB cluster parameter group to associate with the restored DB cluster. If this argument is omitted, default.aurora5.6 is used.
Constraints:
If supplied, must match the name of an existing DBClusterParameterGroup.
list
A list of EC2 VPC security groups to associate with the restored DB cluster.
(string) --
string
A DB subnet group to associate with the restored DB cluster.
Constraints: If supplied, must match the name of an existing DBSubnetGroup.
Example: mySubnetgroup
string
[REQUIRED]
The name of the database engine to be used for the restored DB cluster.
Valid Values: aurora , aurora-postgresql
string
The version number of the database engine to use.
Aurora MySQL
Example: 5.6.10a
Aurora PostgreSQL
Example: 9.6.3
integer
The port number on which the instances in the restored DB cluster accept connections.
Default: 3306
string
[REQUIRED]
The name of the master user for the restored DB cluster.
Constraints:
Must be 1 to 16 letters or numbers.
First character must be a letter.
Cannot be a reserved word for the chosen database engine.
string
[REQUIRED]
The password for the master database user. This password can contain any printable ASCII character except "/", """, or "@".
Constraints: Must contain from 8 to 41 characters.
string
A value that indicates that the restored DB cluster should be associated with the specified option group.
Permanent options can't be removed from an option group. An option group can't be removed from a DB cluster once it is associated with a DB cluster.
string
The daily time range during which automated backups are created if automated backups are enabled using the BackupRetentionPeriod parameter.
The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region. To see the time blocks available, see Adjusting the Preferred Maintenance Window in the Amazon RDS User Guide.
Constraints:
Must be in the format hh24:mi-hh24:mi .
Must be in Universal Coordinated Time (UTC).
Must not conflict with the preferred maintenance window.
Must be at least 30 minutes.
string
The weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
Format: ddd:hh24:mi-ddd:hh24:mi
The default is a 30-minute window selected at random from an 8-hour block of time for each AWS Region, occurring on a random day of the week. To see the time blocks available, see Adjusting the Preferred Maintenance Window in the Amazon RDS User Guide.
Valid Days: Mon, Tue, Wed, Thu, Fri, Sat, Sun.
Constraints: Minimum 30-minute window.
list
A list of tags. For more information, see Tagging Amazon RDS Resources .
(dict) --
Metadata assigned to an Amazon RDS resource consisting of a key-value pair.
Key (string) --
A key is the required name of the tag. The string value can be from 1 to 128 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can only contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\p{L}\p{Z}\p{N}_.:/=+\-]*)$").
Value (string) --
A value is the optional value of the tag. The string value can be from 1 to 256 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can only contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\p{L}\p{Z}\p{N}_.:/=+\-]*)$").
boolean
Specifies whether the restored DB cluster is encrypted.
string
The AWS KMS key identifier for an encrypted DB cluster.
The KMS key identifier is the Amazon Resource Name (ARN) for the KMS encryption key. If you are creating a DB cluster with the same AWS account that owns the KMS encryption key used to encrypt the new DB cluster, then you can use the KMS key alias instead of the ARN for the KM encryption key.
If the StorageEncrypted parameter is true, and you do not specify a value for the KmsKeyId parameter, then Amazon RDS will use your default encryption key. AWS KMS creates the default encryption key for your AWS account. Your AWS account has a different default encryption key for each AWS Region.
boolean
True to enable mapping of AWS Identity and Access Management (IAM) accounts to database accounts, and otherwise false.
Default: false
string
[REQUIRED]
The identifier for the database engine that was backed up to create the files stored in the Amazon S3 bucket.
Valid values: mysql
string
[REQUIRED]
The version of the database that the backup files were created from.
MySQL version 5.5 and 5.6 are supported.
Example: 5.6.22
string
[REQUIRED]
The name of the Amazon S3 bucket that contains the data used to create the Amazon Aurora DB cluster.
string
The prefix for all of the file names that contain the data used to create the Amazon Aurora DB cluster. If you do not specify a SourceS3Prefix value, then the Amazon Aurora DB cluster is created by using all of the files in the Amazon S3 bucket.
string
[REQUIRED]
The Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that authorizes Amazon RDS to access the Amazon S3 bucket on your behalf.
integer
The target backtrack window, in seconds. To disable backtracking, set this value to 0.
Default: 0
Constraints:
If specified, this value must be set to a number from 0 to 259,200 (72 hours).
dict
Response Syntax
{
'DBCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'CharacterSetName': 'string',
'DatabaseName': 'string',
'DBClusterIdentifier': 'string',
'DBClusterParameterGroup': 'string',
'DBSubnetGroup': 'string',
'Status': 'string',
'PercentProgress': 'string',
'EarliestRestorableTime': datetime(2015, 1, 1),
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'MultiAZ': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'LatestRestorableTime': datetime(2015, 1, 1),
'Port': 123,
'MasterUsername': 'string',
'DBClusterOptionGroupMemberships': [
{
'DBClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReplicationSourceIdentifier': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'DBClusterMembers': [
{
'DBInstanceIdentifier': 'string',
'IsClusterWriter': True|False,
'DBClusterParameterGroupStatus': 'string',
'PromotionTier': 123
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'DBClusterArn': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'IAMDatabaseAuthenticationEnabled': True|False,
'CloneGroupId': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'EarliestBacktrackTime': datetime(2015, 1, 1),
'BacktrackWindow': 123,
'BacktrackConsumedChangeRecords': 123
}
}
Response Structure
(dict) --
DBCluster (dict) --
Contains the details of an Amazon RDS DB cluster.
This data type is used as a response element in the DescribeDBClusters action.
AllocatedStorage (integer) --
For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size is not fixed, but instead automatically adjusts as needed.
AvailabilityZones (list) --
Provides the list of EC2 Availability Zones that instances in the DB cluster can be created in.
(string) --
BackupRetentionPeriod (integer) --
Specifies the number of days for which automatic DB snapshots are retained.
CharacterSetName (string) --
If present, specifies the name of the character set that this cluster is associated with.
DatabaseName (string) --
Contains the name of the initial database of this DB cluster that was provided at create time, if one was specified when the DB cluster was created. This same name is returned for the life of the DB cluster.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
DBClusterParameterGroup (string) --
Specifies the name of the DB cluster parameter group for the DB cluster.
DBSubnetGroup (string) --
Specifies information on the subnet group associated with the DB cluster, including the name, description, and subnets in the subnet group.
Status (string) --
Specifies the current state of this DB cluster.
PercentProgress (string) --
Specifies the progress of the operation as a percentage.
EarliestRestorableTime (datetime) --
The earliest time to which a database can be restored with point-in-time restore.
Endpoint (string) --
Specifies the connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster. The reader endpoint for a DB cluster load-balances connections across the Aurora Replicas that are available in a DB cluster. As clients request new connections to the reader endpoint, Aurora distributes the connection requests among the Aurora Replicas in the DB cluster. This functionality can help balance your read workload across multiple Aurora Replicas in your DB cluster.
If a failover occurs, and the Aurora Replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Aurora Replicas in the cluster, you can then reconnect to the reader endpoint.
MultiAZ (boolean) --
Specifies whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
Provides the name of the database engine to be used for this DB cluster.
EngineVersion (string) --
Indicates the database engine version.
LatestRestorableTime (datetime) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Port (integer) --
Specifies the port that the database engine is listening on.
MasterUsername (string) --
Contains the master username for the DB cluster.
DBClusterOptionGroupMemberships (list) --
Provides the list of option group memberships for this DB cluster.
(dict) --
Contains status information for a DB cluster option group.
DBClusterOptionGroupName (string) --
Specifies the name of the DB cluster option group.
Status (string) --
Specifies the status of the DB cluster option group.
PreferredBackupWindow (string) --
Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod .
PreferredMaintenanceWindow (string) --
Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
ReplicationSourceIdentifier (string) --
Contains the identifier of the source DB cluster if this DB cluster is a Read Replica.
ReadReplicaIdentifiers (list) --
Contains one or more identifiers of the Read Replicas associated with this DB cluster.
(string) --
DBClusterMembers (list) --
Provides the list of instances that make up the DB cluster.
(dict) --
Contains information about an instance that is part of a DB cluster.
DBInstanceIdentifier (string) --
Specifies the instance identifier for this member of the DB cluster.
IsClusterWriter (boolean) --
Value that is true if the cluster member is the primary instance for the DB cluster and false otherwise.
DBClusterParameterGroupStatus (string) --
Specifies the status of the DB cluster parameter group for this member of the DB cluster.
PromotionTier (integer) --
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster .
VpcSecurityGroups (list) --
Provides a list of VPC security groups that the DB cluster belongs to.
(dict) --
This data type is used as a response element for queries on VPC security group membership.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Specifies whether the DB cluster is encrypted.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB cluster.
DbClusterResourceId (string) --
The AWS Region-unique, immutable identifier for the DB cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB cluster is accessed.
DBClusterArn (string) --
The Amazon Resource Name (ARN) for the DB cluster.
AssociatedRoles (list) --
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster. IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other AWS services on your behalf.
(dict) --
Describes an AWS Identity and Access Management (IAM) role that is associated with a DB cluster.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB cluster.
Status (string) --
Describes the state of association between the IAM role and the DB cluster. The Status property returns one of the following values:
ACTIVE - the IAM role ARN is associated with the DB cluster and can be used to access other AWS services on your behalf.
PENDING - the IAM role ARN is being associated with the DB cluster.
INVALID - the IAM role ARN is associated with the DB cluster, but the DB cluster is unable to assume the IAM role in order to access other AWS services on your behalf.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
CloneGroupId (string) --
Identifies the clone group to which the DB cluster is associated.
ClusterCreateTime (datetime) --
Specifies the time when the DB cluster was created, in Universal Coordinated Time (UTC).
EarliestBacktrackTime (datetime) --
The earliest time to which a DB cluster can be backtracked.
BacktrackWindow (integer) --
The target backtrack window, in seconds. If this value is set to 0, backtracking is disabled for the DB cluster. Otherwise, backtracking is enabled.
BacktrackConsumedChangeRecords (integer) --
The number of change records stored for Backtrack.
{'BacktrackWindow': 'long'}
Response {'DBCluster': {'BacktrackConsumedChangeRecords': 'long',
'BacktrackWindow': 'long',
'EarliestBacktrackTime': 'timestamp'}}
Creates a new DB cluster from a DB snapshot or DB cluster snapshot.
If a DB snapshot is specified, the target DB cluster is created from the source DB snapshot with a default configuration and default security group.
If a DB cluster snapshot is specified, the target DB cluster is created from the source DB cluster restore point with the same configuration as the original source DB cluster, except that the new DB cluster is created with the default security group.
For more information on Amazon Aurora, see Aurora on Amazon RDS in the Amazon RDS User Guide.
See also: AWS API Documentation
Request Syntax
client.restore_db_cluster_from_snapshot(
AvailabilityZones=[
'string',
],
DBClusterIdentifier='string',
SnapshotIdentifier='string',
Engine='string',
EngineVersion='string',
Port=123,
DBSubnetGroupName='string',
DatabaseName='string',
OptionGroupName='string',
VpcSecurityGroupIds=[
'string',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
KmsKeyId='string',
EnableIAMDatabaseAuthentication=True|False,
BacktrackWindow=123
)
list
Provides the list of EC2 Availability Zones that instances in the restored DB cluster can be created in.
(string) --
string
[REQUIRED]
The name of the DB cluster to create from the DB snapshot or DB cluster snapshot. This parameter isn't case-sensitive.
Constraints:
Must contain from 1 to 63 letters, numbers, or hyphens
First character must be a letter
Cannot end with a hyphen or contain two consecutive hyphens
Example: my-snapshot-id
string
[REQUIRED]
The identifier for the DB snapshot or DB cluster snapshot to restore from.
You can use either the name or the Amazon Resource Name (ARN) to specify a DB cluster snapshot. However, you can use only the ARN to specify a DB snapshot.
Constraints:
Must match the identifier of an existing Snapshot.
string
[REQUIRED]
The database engine to use for the new DB cluster.
Default: The same as source
Constraint: Must be compatible with the engine of the source
string
The version of the database engine to use for the new DB cluster.
integer
The port number on which the new DB cluster accepts connections.
Constraints: Value must be 1150-65535
Default: The same port as the original DB cluster.
string
The name of the DB subnet group to use for the new DB cluster.
Constraints: If supplied, must match the name of an existing DBSubnetGroup.
Example: mySubnetgroup
string
The database name for the restored DB cluster.
string
The name of the option group to use for the restored DB cluster.
list
A list of VPC security groups that the new DB cluster will belong to.
(string) --
list
The tags to be assigned to the restored DB cluster.
(dict) --
Metadata assigned to an Amazon RDS resource consisting of a key-value pair.
Key (string) --
A key is the required name of the tag. The string value can be from 1 to 128 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can only contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\p{L}\p{Z}\p{N}_.:/=+\-]*)$").
Value (string) --
A value is the optional value of the tag. The string value can be from 1 to 256 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can only contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\p{L}\p{Z}\p{N}_.:/=+\-]*)$").
string
The AWS KMS key identifier to use when restoring an encrypted DB cluster from a DB snapshot or DB cluster snapshot.
The KMS key identifier is the Amazon Resource Name (ARN) for the KMS encryption key. If you are restoring a DB cluster with the same AWS account that owns the KMS encryption key used to encrypt the new DB cluster, then you can use the KMS key alias instead of the ARN for the KMS encryption key.
If you do not specify a value for the KmsKeyId parameter, then the following will occur:
If the DB snapshot or DB cluster snapshot in SnapshotIdentifier is encrypted, then the restored DB cluster is encrypted using the KMS key that was used to encrypt the DB snapshot or DB cluster snapshot.
If the DB snapshot or DB cluster snapshot in SnapshotIdentifier is not encrypted, then the restored DB cluster is not encrypted.
boolean
True to enable mapping of AWS Identity and Access Management (IAM) accounts to database accounts, and otherwise false.
Default: false
integer
The target backtrack window, in seconds. To disable backtracking, set this value to 0.
Default: 0
Constraints:
If specified, this value must be set to a number from 0 to 259,200 (72 hours).
dict
Response Syntax
{
'DBCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'CharacterSetName': 'string',
'DatabaseName': 'string',
'DBClusterIdentifier': 'string',
'DBClusterParameterGroup': 'string',
'DBSubnetGroup': 'string',
'Status': 'string',
'PercentProgress': 'string',
'EarliestRestorableTime': datetime(2015, 1, 1),
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'MultiAZ': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'LatestRestorableTime': datetime(2015, 1, 1),
'Port': 123,
'MasterUsername': 'string',
'DBClusterOptionGroupMemberships': [
{
'DBClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReplicationSourceIdentifier': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'DBClusterMembers': [
{
'DBInstanceIdentifier': 'string',
'IsClusterWriter': True|False,
'DBClusterParameterGroupStatus': 'string',
'PromotionTier': 123
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'DBClusterArn': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'IAMDatabaseAuthenticationEnabled': True|False,
'CloneGroupId': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'EarliestBacktrackTime': datetime(2015, 1, 1),
'BacktrackWindow': 123,
'BacktrackConsumedChangeRecords': 123
}
}
Response Structure
(dict) --
DBCluster (dict) --
Contains the details of an Amazon RDS DB cluster.
This data type is used as a response element in the DescribeDBClusters action.
AllocatedStorage (integer) --
For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size is not fixed, but instead automatically adjusts as needed.
AvailabilityZones (list) --
Provides the list of EC2 Availability Zones that instances in the DB cluster can be created in.
(string) --
BackupRetentionPeriod (integer) --
Specifies the number of days for which automatic DB snapshots are retained.
CharacterSetName (string) --
If present, specifies the name of the character set that this cluster is associated with.
DatabaseName (string) --
Contains the name of the initial database of this DB cluster that was provided at create time, if one was specified when the DB cluster was created. This same name is returned for the life of the DB cluster.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
DBClusterParameterGroup (string) --
Specifies the name of the DB cluster parameter group for the DB cluster.
DBSubnetGroup (string) --
Specifies information on the subnet group associated with the DB cluster, including the name, description, and subnets in the subnet group.
Status (string) --
Specifies the current state of this DB cluster.
PercentProgress (string) --
Specifies the progress of the operation as a percentage.
EarliestRestorableTime (datetime) --
The earliest time to which a database can be restored with point-in-time restore.
Endpoint (string) --
Specifies the connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster. The reader endpoint for a DB cluster load-balances connections across the Aurora Replicas that are available in a DB cluster. As clients request new connections to the reader endpoint, Aurora distributes the connection requests among the Aurora Replicas in the DB cluster. This functionality can help balance your read workload across multiple Aurora Replicas in your DB cluster.
If a failover occurs, and the Aurora Replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Aurora Replicas in the cluster, you can then reconnect to the reader endpoint.
MultiAZ (boolean) --
Specifies whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
Provides the name of the database engine to be used for this DB cluster.
EngineVersion (string) --
Indicates the database engine version.
LatestRestorableTime (datetime) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Port (integer) --
Specifies the port that the database engine is listening on.
MasterUsername (string) --
Contains the master username for the DB cluster.
DBClusterOptionGroupMemberships (list) --
Provides the list of option group memberships for this DB cluster.
(dict) --
Contains status information for a DB cluster option group.
DBClusterOptionGroupName (string) --
Specifies the name of the DB cluster option group.
Status (string) --
Specifies the status of the DB cluster option group.
PreferredBackupWindow (string) --
Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod .
PreferredMaintenanceWindow (string) --
Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
ReplicationSourceIdentifier (string) --
Contains the identifier of the source DB cluster if this DB cluster is a Read Replica.
ReadReplicaIdentifiers (list) --
Contains one or more identifiers of the Read Replicas associated with this DB cluster.
(string) --
DBClusterMembers (list) --
Provides the list of instances that make up the DB cluster.
(dict) --
Contains information about an instance that is part of a DB cluster.
DBInstanceIdentifier (string) --
Specifies the instance identifier for this member of the DB cluster.
IsClusterWriter (boolean) --
Value that is true if the cluster member is the primary instance for the DB cluster and false otherwise.
DBClusterParameterGroupStatus (string) --
Specifies the status of the DB cluster parameter group for this member of the DB cluster.
PromotionTier (integer) --
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster .
VpcSecurityGroups (list) --
Provides a list of VPC security groups that the DB cluster belongs to.
(dict) --
This data type is used as a response element for queries on VPC security group membership.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Specifies whether the DB cluster is encrypted.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB cluster.
DbClusterResourceId (string) --
The AWS Region-unique, immutable identifier for the DB cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB cluster is accessed.
DBClusterArn (string) --
The Amazon Resource Name (ARN) for the DB cluster.
AssociatedRoles (list) --
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster. IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other AWS services on your behalf.
(dict) --
Describes an AWS Identity and Access Management (IAM) role that is associated with a DB cluster.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB cluster.
Status (string) --
Describes the state of association between the IAM role and the DB cluster. The Status property returns one of the following values:
ACTIVE - the IAM role ARN is associated with the DB cluster and can be used to access other AWS services on your behalf.
PENDING - the IAM role ARN is being associated with the DB cluster.
INVALID - the IAM role ARN is associated with the DB cluster, but the DB cluster is unable to assume the IAM role in order to access other AWS services on your behalf.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
CloneGroupId (string) --
Identifies the clone group to which the DB cluster is associated.
ClusterCreateTime (datetime) --
Specifies the time when the DB cluster was created, in Universal Coordinated Time (UTC).
EarliestBacktrackTime (datetime) --
The earliest time to which a DB cluster can be backtracked.
BacktrackWindow (integer) --
The target backtrack window, in seconds. If this value is set to 0, backtracking is disabled for the DB cluster. Otherwise, backtracking is enabled.
BacktrackConsumedChangeRecords (integer) --
The number of change records stored for Backtrack.
{'BacktrackWindow': 'long'}
Response {'DBCluster': {'BacktrackConsumedChangeRecords': 'long',
'BacktrackWindow': 'long',
'EarliestBacktrackTime': 'timestamp'}}
Restores a DB cluster to an arbitrary point in time. Users can restore to any point in time before LatestRestorableTime for up to BackupRetentionPeriod days. The target DB cluster is created from the source DB cluster with the same configuration as the original DB cluster, except that the new DB cluster is created with the default DB security group.
Note
This action only restores the DB cluster, not the DB instances for that DB cluster. You must invoke the CreateDBInstance action to create DB instances for the restored DB cluster, specifying the identifier of the restored DB cluster in DBClusterIdentifier . You can create DB instances only after the RestoreDBClusterToPointInTime action has completed and the DB cluster is available.
For more information on Amazon Aurora, see Aurora on Amazon RDS in the Amazon RDS User Guide.
See also: AWS API Documentation
Request Syntax
client.restore_db_cluster_to_point_in_time(
DBClusterIdentifier='string',
RestoreType='string',
SourceDBClusterIdentifier='string',
RestoreToTime=datetime(2015, 1, 1),
UseLatestRestorableTime=True|False,
Port=123,
DBSubnetGroupName='string',
OptionGroupName='string',
VpcSecurityGroupIds=[
'string',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
KmsKeyId='string',
EnableIAMDatabaseAuthentication=True|False,
BacktrackWindow=123
)
string
[REQUIRED]
The name of the new DB cluster to be created.
Constraints:
Must contain from 1 to 63 letters, numbers, or hyphens
First character must be a letter
Cannot end with a hyphen or contain two consecutive hyphens
string
The type of restore to be performed. You can specify one of the following values:
full-copy - The new DB cluster is restored as a full copy of the source DB cluster.
copy-on-write - The new DB cluster is restored as a clone of the source DB cluster.
Constraints: You can't specify copy-on-write if the engine version of the source DB cluster is earlier than 1.11.
If you don't specify a RestoreType value, then the new DB cluster is restored as a full copy of the source DB cluster.
string
[REQUIRED]
The identifier of the source DB cluster from which to restore.
Constraints:
Must match the identifier of an existing DBCluster.
datetime
The date and time to restore the DB cluster to.
Valid Values: Value must be a time in Universal Coordinated Time (UTC) format
Constraints:
Must be before the latest restorable time for the DB instance
Must be specified if UseLatestRestorableTime parameter is not provided
Cannot be specified if UseLatestRestorableTime parameter is true
Cannot be specified if RestoreType parameter is copy-on-write
Example: 2015-03-07T23:45:00Z
boolean
A value that is set to true to restore the DB cluster to the latest restorable backup time, and false otherwise.
Default: false
Constraints: Cannot be specified if RestoreToTime parameter is provided.
integer
The port number on which the new DB cluster accepts connections.
Constraints: Value must be 1150-65535
Default: The same port as the original DB cluster.
string
The DB subnet group name to use for the new DB cluster.
Constraints: If supplied, must match the name of an existing DBSubnetGroup.
Example: mySubnetgroup
string
The name of the option group for the new DB cluster.
list
A list of VPC security groups that the new DB cluster belongs to.
(string) --
list
A list of tags. For more information, see Tagging Amazon RDS Resources .
(dict) --
Metadata assigned to an Amazon RDS resource consisting of a key-value pair.
Key (string) --
A key is the required name of the tag. The string value can be from 1 to 128 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can only contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\p{L}\p{Z}\p{N}_.:/=+\-]*)$").
Value (string) --
A value is the optional value of the tag. The string value can be from 1 to 256 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can only contain only the set of Unicode letters, digits, white-space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\p{L}\p{Z}\p{N}_.:/=+\-]*)$").
string
The AWS KMS key identifier to use when restoring an encrypted DB cluster from an encrypted DB cluster.
The KMS key identifier is the Amazon Resource Name (ARN) for the KMS encryption key. If you are restoring a DB cluster with the same AWS account that owns the KMS encryption key used to encrypt the new DB cluster, then you can use the KMS key alias instead of the ARN for the KMS encryption key.
You can restore to a new DB cluster and encrypt the new DB cluster with a KMS key that is different than the KMS key used to encrypt the source DB cluster. The new DB cluster is encrypted with the KMS key identified by the KmsKeyId parameter.
If you do not specify a value for the KmsKeyId parameter, then the following will occur:
If the DB cluster is encrypted, then the restored DB cluster is encrypted using the KMS key that was used to encrypt the source DB cluster.
If the DB cluster is not encrypted, then the restored DB cluster is not encrypted.
If DBClusterIdentifier refers to a DB cluster that is not encrypted, then the restore request is rejected.
boolean
True to enable mapping of AWS Identity and Access Management (IAM) accounts to database accounts, and otherwise false.
Default: false
integer
The target backtrack window, in seconds. To disable backtracking, set this value to 0.
Default: 0
Constraints:
If specified, this value must be set to a number from 0 to 259,200 (72 hours).
dict
Response Syntax
{
'DBCluster': {
'AllocatedStorage': 123,
'AvailabilityZones': [
'string',
],
'BackupRetentionPeriod': 123,
'CharacterSetName': 'string',
'DatabaseName': 'string',
'DBClusterIdentifier': 'string',
'DBClusterParameterGroup': 'string',
'DBSubnetGroup': 'string',
'Status': 'string',
'PercentProgress': 'string',
'EarliestRestorableTime': datetime(2015, 1, 1),
'Endpoint': 'string',
'ReaderEndpoint': 'string',
'MultiAZ': True|False,
'Engine': 'string',
'EngineVersion': 'string',
'LatestRestorableTime': datetime(2015, 1, 1),
'Port': 123,
'MasterUsername': 'string',
'DBClusterOptionGroupMemberships': [
{
'DBClusterOptionGroupName': 'string',
'Status': 'string'
},
],
'PreferredBackupWindow': 'string',
'PreferredMaintenanceWindow': 'string',
'ReplicationSourceIdentifier': 'string',
'ReadReplicaIdentifiers': [
'string',
],
'DBClusterMembers': [
{
'DBInstanceIdentifier': 'string',
'IsClusterWriter': True|False,
'DBClusterParameterGroupStatus': 'string',
'PromotionTier': 123
},
],
'VpcSecurityGroups': [
{
'VpcSecurityGroupId': 'string',
'Status': 'string'
},
],
'HostedZoneId': 'string',
'StorageEncrypted': True|False,
'KmsKeyId': 'string',
'DbClusterResourceId': 'string',
'DBClusterArn': 'string',
'AssociatedRoles': [
{
'RoleArn': 'string',
'Status': 'string'
},
],
'IAMDatabaseAuthenticationEnabled': True|False,
'CloneGroupId': 'string',
'ClusterCreateTime': datetime(2015, 1, 1),
'EarliestBacktrackTime': datetime(2015, 1, 1),
'BacktrackWindow': 123,
'BacktrackConsumedChangeRecords': 123
}
}
Response Structure
(dict) --
DBCluster (dict) --
Contains the details of an Amazon RDS DB cluster.
This data type is used as a response element in the DescribeDBClusters action.
AllocatedStorage (integer) --
For all database engines except Amazon Aurora, AllocatedStorage specifies the allocated storage size in gibibytes (GiB). For Aurora, AllocatedStorage always returns 1, because Aurora DB cluster storage size is not fixed, but instead automatically adjusts as needed.
AvailabilityZones (list) --
Provides the list of EC2 Availability Zones that instances in the DB cluster can be created in.
(string) --
BackupRetentionPeriod (integer) --
Specifies the number of days for which automatic DB snapshots are retained.
CharacterSetName (string) --
If present, specifies the name of the character set that this cluster is associated with.
DatabaseName (string) --
Contains the name of the initial database of this DB cluster that was provided at create time, if one was specified when the DB cluster was created. This same name is returned for the life of the DB cluster.
DBClusterIdentifier (string) --
Contains a user-supplied DB cluster identifier. This identifier is the unique key that identifies a DB cluster.
DBClusterParameterGroup (string) --
Specifies the name of the DB cluster parameter group for the DB cluster.
DBSubnetGroup (string) --
Specifies information on the subnet group associated with the DB cluster, including the name, description, and subnets in the subnet group.
Status (string) --
Specifies the current state of this DB cluster.
PercentProgress (string) --
Specifies the progress of the operation as a percentage.
EarliestRestorableTime (datetime) --
The earliest time to which a database can be restored with point-in-time restore.
Endpoint (string) --
Specifies the connection endpoint for the primary instance of the DB cluster.
ReaderEndpoint (string) --
The reader endpoint for the DB cluster. The reader endpoint for a DB cluster load-balances connections across the Aurora Replicas that are available in a DB cluster. As clients request new connections to the reader endpoint, Aurora distributes the connection requests among the Aurora Replicas in the DB cluster. This functionality can help balance your read workload across multiple Aurora Replicas in your DB cluster.
If a failover occurs, and the Aurora Replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Aurora Replicas in the cluster, you can then reconnect to the reader endpoint.
MultiAZ (boolean) --
Specifies whether the DB cluster has instances in multiple Availability Zones.
Engine (string) --
Provides the name of the database engine to be used for this DB cluster.
EngineVersion (string) --
Indicates the database engine version.
LatestRestorableTime (datetime) --
Specifies the latest time to which a database can be restored with point-in-time restore.
Port (integer) --
Specifies the port that the database engine is listening on.
MasterUsername (string) --
Contains the master username for the DB cluster.
DBClusterOptionGroupMemberships (list) --
Provides the list of option group memberships for this DB cluster.
(dict) --
Contains status information for a DB cluster option group.
DBClusterOptionGroupName (string) --
Specifies the name of the DB cluster option group.
Status (string) --
Specifies the status of the DB cluster option group.
PreferredBackupWindow (string) --
Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod .
PreferredMaintenanceWindow (string) --
Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).
ReplicationSourceIdentifier (string) --
Contains the identifier of the source DB cluster if this DB cluster is a Read Replica.
ReadReplicaIdentifiers (list) --
Contains one or more identifiers of the Read Replicas associated with this DB cluster.
(string) --
DBClusterMembers (list) --
Provides the list of instances that make up the DB cluster.
(dict) --
Contains information about an instance that is part of a DB cluster.
DBInstanceIdentifier (string) --
Specifies the instance identifier for this member of the DB cluster.
IsClusterWriter (boolean) --
Value that is true if the cluster member is the primary instance for the DB cluster and false otherwise.
DBClusterParameterGroupStatus (string) --
Specifies the status of the DB cluster parameter group for this member of the DB cluster.
PromotionTier (integer) --
A value that specifies the order in which an Aurora Replica is promoted to the primary instance after a failure of the existing primary instance. For more information, see Fault Tolerance for an Aurora DB Cluster .
VpcSecurityGroups (list) --
Provides a list of VPC security groups that the DB cluster belongs to.
(dict) --
This data type is used as a response element for queries on VPC security group membership.
VpcSecurityGroupId (string) --
The name of the VPC security group.
Status (string) --
The status of the VPC security group.
HostedZoneId (string) --
Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.
StorageEncrypted (boolean) --
Specifies whether the DB cluster is encrypted.
KmsKeyId (string) --
If StorageEncrypted is true, the AWS KMS key identifier for the encrypted DB cluster.
DbClusterResourceId (string) --
The AWS Region-unique, immutable identifier for the DB cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS key for the DB cluster is accessed.
DBClusterArn (string) --
The Amazon Resource Name (ARN) for the DB cluster.
AssociatedRoles (list) --
Provides a list of the AWS Identity and Access Management (IAM) roles that are associated with the DB cluster. IAM roles that are associated with a DB cluster grant permission for the DB cluster to access other AWS services on your behalf.
(dict) --
Describes an AWS Identity and Access Management (IAM) role that is associated with a DB cluster.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role that is associated with the DB cluster.
Status (string) --
Describes the state of association between the IAM role and the DB cluster. The Status property returns one of the following values:
ACTIVE - the IAM role ARN is associated with the DB cluster and can be used to access other AWS services on your behalf.
PENDING - the IAM role ARN is being associated with the DB cluster.
INVALID - the IAM role ARN is associated with the DB cluster, but the DB cluster is unable to assume the IAM role in order to access other AWS services on your behalf.
IAMDatabaseAuthenticationEnabled (boolean) --
True if mapping of AWS Identity and Access Management (IAM) accounts to database accounts is enabled, and otherwise false.
CloneGroupId (string) --
Identifies the clone group to which the DB cluster is associated.
ClusterCreateTime (datetime) --
Specifies the time when the DB cluster was created, in Universal Coordinated Time (UTC).
EarliestBacktrackTime (datetime) --
The earliest time to which a DB cluster can be backtracked.
BacktrackWindow (integer) --
The target backtrack window, in seconds. If this value is set to 0, backtracking is disabled for the DB cluster. Otherwise, backtracking is enabled.
BacktrackConsumedChangeRecords (integer) --
The number of change records stored for Backtrack.