2019/10/07 - Amazon Kinesis Firehose - 3 updated api methods
Changes Amazon Kinesis Data Firehose now allows delivering data to Elasticsearch clusters set up in a different AWS account than the Firehose AWS account. For technical documentation, look for ElasticsearchDestinationConfiguration in the Amazon Kinesis Firehose API reference.
{'ElasticsearchDestinationConfiguration': {'ClusterEndpoint': 'string'}}
Creates a Kinesis Data Firehose delivery stream.
By default, you can create up to 50 delivery streams per AWS Region.
This is an asynchronous operation that immediately returns. The initial status of the delivery stream is CREATING . After the delivery stream is created, its status is ACTIVE and it now accepts data. Attempts to send data to a delivery stream that is not in the ACTIVE state cause an exception. To check the state of a delivery stream, use DescribeDeliveryStream .
A Kinesis Data Firehose delivery stream can be configured to receive records directly from providers using PutRecord or PutRecordBatch , or it can be configured to use an existing Kinesis stream as its source. To specify a Kinesis data stream as input, set the DeliveryStreamType parameter to KinesisStreamAsSource , and provide the Kinesis stream Amazon Resource Name (ARN) and role ARN in the KinesisStreamSourceConfiguration parameter.
A delivery stream is configured with a single destination: Amazon S3, Amazon ES, Amazon Redshift, or Splunk. You must specify only one of the following destination configuration parameters: ExtendedS3DestinationConfiguration , S3DestinationConfiguration , ElasticsearchDestinationConfiguration , RedshiftDestinationConfiguration , or SplunkDestinationConfiguration .
When you specify S3DestinationConfiguration , you can also provide the following optional values: BufferingHints, EncryptionConfiguration , and CompressionFormat . By default, if no BufferingHints value is provided, Kinesis Data Firehose buffers data up to 5 MB or for 5 minutes, whichever condition is satisfied first. BufferingHints is a hint, so there are some cases where the service cannot adhere to these conditions strictly. For example, record boundaries might be such that the size is a little over or under the configured buffering size. By default, no encryption is performed. We strongly recommend that you enable encryption to ensure secure data storage in Amazon S3.
A few notes about Amazon Redshift as a destination:
An Amazon Redshift destination requires an S3 bucket as intermediate location. Kinesis Data Firehose first delivers data to Amazon S3 and then uses COPY syntax to load data into an Amazon Redshift table. This is specified in the RedshiftDestinationConfiguration.S3Configuration parameter.
The compression formats SNAPPY or ZIP cannot be specified in RedshiftDestinationConfiguration.S3Configuration because the Amazon Redshift COPY operation that reads from the S3 bucket doesn't support these compression formats.
We strongly recommend that you use the user name and password you provide exclusively with Kinesis Data Firehose, and that the permissions for the account are restricted for Amazon Redshift INSERT permissions.
Kinesis Data Firehose assumes the IAM role that is configured as part of the destination. The role should allow the Kinesis Data Firehose principal to assume the role, and the role should have permissions that allow the service to deliver the data. For more information, see Grant Kinesis Data Firehose Access to an Amazon S3 Destination in the Amazon Kinesis Data Firehose Developer Guide .
See also: AWS API Documentation
Request Syntax
client.create_delivery_stream(
DeliveryStreamName='string',
DeliveryStreamType='DirectPut'|'KinesisStreamAsSource',
KinesisStreamSourceConfiguration={
'KinesisStreamARN': 'string',
'RoleARN': 'string'
},
S3DestinationConfiguration={
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
ExtendedS3DestinationConfiguration={
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'S3BackupMode': 'Disabled'|'Enabled',
'S3BackupConfiguration': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'DataFormatConversionConfiguration': {
'SchemaConfiguration': {
'RoleARN': 'string',
'CatalogId': 'string',
'DatabaseName': 'string',
'TableName': 'string',
'Region': 'string',
'VersionId': 'string'
},
'InputFormatConfiguration': {
'Deserializer': {
'OpenXJsonSerDe': {
'ConvertDotsInJsonKeysToUnderscores': True|False,
'CaseInsensitive': True|False,
'ColumnToJsonKeyMappings': {
'string': 'string'
}
},
'HiveJsonSerDe': {
'TimestampFormats': [
'string',
]
}
}
},
'OutputFormatConfiguration': {
'Serializer': {
'ParquetSerDe': {
'BlockSizeBytes': 123,
'PageSizeBytes': 123,
'Compression': 'UNCOMPRESSED'|'GZIP'|'SNAPPY',
'EnableDictionaryCompression': True|False,
'MaxPaddingBytes': 123,
'WriterVersion': 'V1'|'V2'
},
'OrcSerDe': {
'StripeSizeBytes': 123,
'BlockSizeBytes': 123,
'RowIndexStride': 123,
'EnablePadding': True|False,
'PaddingTolerance': 123.0,
'Compression': 'NONE'|'ZLIB'|'SNAPPY',
'BloomFilterColumns': [
'string',
],
'BloomFilterFalsePositiveProbability': 123.0,
'DictionaryKeyThreshold': 123.0,
'FormatVersion': 'V0_11'|'V0_12'
}
}
},
'Enabled': True|False
}
},
RedshiftDestinationConfiguration={
'RoleARN': 'string',
'ClusterJDBCURL': 'string',
'CopyCommand': {
'DataTableName': 'string',
'DataTableColumns': 'string',
'CopyOptions': 'string'
},
'Username': 'string',
'Password': 'string',
'RetryOptions': {
'DurationInSeconds': 123
},
'S3Configuration': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'S3BackupMode': 'Disabled'|'Enabled',
'S3BackupConfiguration': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
ElasticsearchDestinationConfiguration={
'RoleARN': 'string',
'DomainARN': 'string',
'ClusterEndpoint': 'string',
'IndexName': 'string',
'TypeName': 'string',
'IndexRotationPeriod': 'NoRotation'|'OneHour'|'OneDay'|'OneWeek'|'OneMonth',
'BufferingHints': {
'IntervalInSeconds': 123,
'SizeInMBs': 123
},
'RetryOptions': {
'DurationInSeconds': 123
},
'S3BackupMode': 'FailedDocumentsOnly'|'AllDocuments',
'S3Configuration': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
SplunkDestinationConfiguration={
'HECEndpoint': 'string',
'HECEndpointType': 'Raw'|'Event',
'HECToken': 'string',
'HECAcknowledgmentTimeoutInSeconds': 123,
'RetryOptions': {
'DurationInSeconds': 123
},
'S3BackupMode': 'FailedEventsOnly'|'AllEvents',
'S3Configuration': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
string
[REQUIRED]
The name of the delivery stream. This name must be unique per AWS account in the same AWS Region. If the delivery streams are in different accounts or different Regions, you can have multiple delivery streams with the same name.
string
The delivery stream type. This parameter can be one of the following values:
DirectPut : Provider applications access the delivery stream directly.
KinesisStreamAsSource : The delivery stream uses a Kinesis data stream as a source.
dict
When a Kinesis data stream is used as the source for the delivery stream, a KinesisStreamSourceConfiguration containing the Kinesis data stream Amazon Resource Name (ARN) and the role ARN for the source stream.
KinesisStreamARN (string) -- [REQUIRED]
The ARN of the source Kinesis data stream. For more information, see Amazon Kinesis Data Streams ARN Format .
RoleARN (string) -- [REQUIRED]
The ARN of the role that provides access to the source Kinesis data stream. For more information, see AWS Identity and Access Management (IAM) ARN Format .
dict
[Deprecated] The destination in Amazon S3. You can specify only one destination.
RoleARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) -- [REQUIRED]
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
dict
The destination in Amazon S3. You can specify only one destination.
RoleARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) -- [REQUIRED]
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) -- [REQUIRED]
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) -- [REQUIRED]
The name of the parameter.
ParameterValue (string) -- [REQUIRED]
The parameter value.
S3BackupMode (string) --
The Amazon S3 backup mode.
S3BackupConfiguration (dict) --
The configuration for backup in Amazon S3.
RoleARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) -- [REQUIRED]
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
DataFormatConversionConfiguration (dict) --
The serializer, deserializer, and schema for converting data from the JSON format to the Parquet or ORC format before writing it to Amazon S3.
SchemaConfiguration (dict) --
Specifies the AWS Glue Data Catalog table that contains the column information.
RoleARN (string) --
The role that Kinesis Data Firehose can use to access AWS Glue. This role must be in the same account you use for Kinesis Data Firehose. Cross-account roles aren't allowed.
CatalogId (string) --
The ID of the AWS Glue Data Catalog. If you don't supply this, the AWS account ID is used by default.
DatabaseName (string) --
Specifies the name of the AWS Glue database that contains the schema for the output data.
TableName (string) --
Specifies the AWS Glue table that contains the column information that constitutes your data schema.
Region (string) --
If you don't specify an AWS Region, the default is the current Region.
VersionId (string) --
Specifies the table version for the output data schema. If you don't specify this version ID, or if you set it to LATEST , Kinesis Data Firehose uses the most recent version. This means that any updates to the table are automatically picked up.
InputFormatConfiguration (dict) --
Specifies the deserializer that you want Kinesis Data Firehose to use to convert the format of your data from JSON.
Deserializer (dict) --
Specifies which deserializer to use. You can choose either the Apache Hive JSON SerDe or the OpenX JSON SerDe. If both are non-null, the server rejects the request.
OpenXJsonSerDe (dict) --
The OpenX SerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the native Hive / HCatalog JsonSerDe.
ConvertDotsInJsonKeysToUnderscores (boolean) --
When set to true , specifies that the names of the keys include dots and that you want Kinesis Data Firehose to replace them with underscores. This is useful because Apache Hive does not allow dots in column names. For example, if the JSON contains a key whose name is "a.b", you can define the column name to be "a_b" when using this option.
The default is false .
CaseInsensitive (boolean) --
When set to true , which is the default, Kinesis Data Firehose converts JSON keys to lowercase before deserializing them.
ColumnToJsonKeyMappings (dict) --
Maps column names to JSON keys that aren't identical to the column names. This is useful when the JSON contains keys that are Hive keywords. For example, timestamp is a Hive keyword. If you have a JSON key named timestamp , set this parameter to {"ts": "timestamp"} to map this key to a column named ts .
(string) --
(string) --
HiveJsonSerDe (dict) --
The native Hive / HCatalog JsonSerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the OpenX SerDe.
TimestampFormats (list) --
Indicates how you want Kinesis Data Firehose to parse the date and timestamps that may be present in your input data JSON. To specify these format strings, follow the pattern syntax of JodaTime's DateTimeFormat format strings. For more information, see Class DateTimeFormat . You can also use the special value millis to parse timestamps in epoch milliseconds. If you don't specify a format, Kinesis Data Firehose uses java.sql.Timestamp::valueOf by default.
(string) --
OutputFormatConfiguration (dict) --
Specifies the serializer that you want Kinesis Data Firehose to use to convert the format of your data to the Parquet or ORC format.
Serializer (dict) --
Specifies which serializer to use. You can choose either the ORC SerDe or the Parquet SerDe. If both are non-null, the server rejects the request.
ParquetSerDe (dict) --
A serializer to use for converting data to the Parquet format before storing it in Amazon S3. For more information, see Apache Parquet .
BlockSizeBytes (integer) --
The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.
PageSizeBytes (integer) --
The Parquet page size. Column chunks are divided into pages. A page is conceptually an indivisible unit (in terms of compression and encoding). The minimum value is 64 KiB and the default is 1 MiB.
Compression (string) --
The compression code to use over data blocks. The possible values are UNCOMPRESSED , SNAPPY , and GZIP , with the default being SNAPPY . Use SNAPPY for higher decompression speed. Use GZIP if the compression ration is more important than speed.
EnableDictionaryCompression (boolean) --
Indicates whether to enable dictionary compression.
MaxPaddingBytes (integer) --
The maximum amount of padding to apply. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 0.
WriterVersion (string) --
Indicates the version of row format to output. The possible values are V1 and V2 . The default is V1 .
OrcSerDe (dict) --
A serializer to use for converting data to the ORC format before storing it in Amazon S3. For more information, see Apache ORC .
StripeSizeBytes (integer) --
The number of bytes in each stripe. The default is 64 MiB and the minimum is 8 MiB.
BlockSizeBytes (integer) --
The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.
RowIndexStride (integer) --
The number of rows between index entries. The default is 10,000 and the minimum is 1,000.
EnablePadding (boolean) --
Set this to true to indicate that you want stripes to be padded to the HDFS block boundaries. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is false .
PaddingTolerance (float) --
A number between 0 and 1 that defines the tolerance for block padding as a decimal fraction of stripe size. The default value is 0.05, which means 5 percent of stripe size.
For the default values of 64 MiB ORC stripes and 256 MiB HDFS blocks, the default block padding tolerance of 5 percent reserves a maximum of 3.2 MiB for padding within the 256 MiB block. In such a case, if the available size within the block is more than 3.2 MiB, a new, smaller stripe is inserted to fit within that space. This ensures that no stripe crosses block boundaries and causes remote reads within a node-local task.
Kinesis Data Firehose ignores this parameter when OrcSerDe$EnablePadding is false .
Compression (string) --
The compression code to use over data blocks. The default is SNAPPY .
BloomFilterColumns (list) --
The column names for which you want Kinesis Data Firehose to create bloom filters. The default is null .
(string) --
BloomFilterFalsePositiveProbability (float) --
The Bloom filter false positive probability (FPP). The lower the FPP, the bigger the Bloom filter. The default value is 0.05, the minimum is 0, and the maximum is 1.
DictionaryKeyThreshold (float) --
Represents the fraction of the total number of non-null rows. To turn off dictionary encoding, set this fraction to a number that is less than the number of distinct keys in a dictionary. To always use dictionary encoding, set this threshold to 1.
FormatVersion (string) --
The version of the file to write. The possible values are V0_11 and V0_12 . The default is V0_12 .
Enabled (boolean) --
Defaults to true . Set it to false if you want to disable format conversion while preserving the configuration details.
dict
The destination in Amazon Redshift. You can specify only one destination.
RoleARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
ClusterJDBCURL (string) -- [REQUIRED]
The database connection string.
CopyCommand (dict) -- [REQUIRED]
The COPY command.
DataTableName (string) -- [REQUIRED]
The name of the target table. The table must already exist in the database.
DataTableColumns (string) --
A comma-separated list of column names.
CopyOptions (string) --
Optional parameters to use with the Amazon Redshift COPY command. For more information, see the "Optional Parameters" section of Amazon Redshift COPY command . Some possible examples that would apply to Kinesis Data Firehose are as follows:
delimiter '\t' lzop; - fields are delimited with "t" (TAB character) and compressed using lzop.
delimiter '|' - fields are delimited with "|" (this is the default delimiter).
delimiter '|' escape - the delimiter should be escaped.
fixedwidth 'venueid:3,venuename:25,venuecity:12,venuestate:2,venueseats:6' - fields are fixed width in the source, with each width specified after every column in the table.
JSON 's3://mybucket/jsonpaths.txt' - data is in JSON format, and the path specified is the format of the data.
For more examples, see Amazon Redshift COPY command examples .
Username (string) -- [REQUIRED]
The name of the user.
Password (string) -- [REQUIRED]
The user password.
RetryOptions (dict) --
The retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon Redshift. Default value is 3600 (60 minutes).
DurationInSeconds (integer) --
The length of time during which Kinesis Data Firehose retries delivery after a failure, starting from the initial request and including the first attempt. The default value is 3600 seconds (60 minutes). Kinesis Data Firehose does not retry if the value of DurationInSeconds is 0 (zero) or if the first delivery attempt takes longer than the current value.
S3Configuration (dict) -- [REQUIRED]
The configuration for the intermediate Amazon S3 location from which Amazon Redshift obtains data. Restrictions are described in the topic for CreateDeliveryStream .
The compression formats SNAPPY or ZIP cannot be specified in RedshiftDestinationConfiguration.S3Configuration because the Amazon Redshift COPY operation that reads from the S3 bucket doesn't support these compression formats.
RoleARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) -- [REQUIRED]
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) -- [REQUIRED]
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) -- [REQUIRED]
The name of the parameter.
ParameterValue (string) -- [REQUIRED]
The parameter value.
S3BackupMode (string) --
The Amazon S3 backup mode.
S3BackupConfiguration (dict) --
The configuration for backup in Amazon S3.
RoleARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) -- [REQUIRED]
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
dict
The destination in Amazon ES. You can specify only one destination.
RoleARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose for calling the Amazon ES Configuration API and for indexing documents. For more information, see Grant Kinesis Data Firehose Access to an Amazon S3 Destination and Amazon Resource Names (ARNs) and AWS Service Namespaces .
DomainARN (string) --
The ARN of the Amazon ES domain. The IAM role must have permissions for DescribeElasticsearchDomain , DescribeElasticsearchDomains , and DescribeElasticsearchDomainConfig after assuming the role specified in RoleARN . For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Specify either ClusterEndpoint or DomainARN .
ClusterEndpoint (string) --
The endpoint to use when communicating with the cluster. Specify either this ClusterEndpoint or the DomainARN field.
IndexName (string) -- [REQUIRED]
The Elasticsearch index name.
TypeName (string) -- [REQUIRED]
The Elasticsearch type name. For Elasticsearch 6.x, there can be only one type per index. If you try to specify a new type for an existing index that already has another type, Kinesis Data Firehose returns an error during run time.
IndexRotationPeriod (string) --
The Elasticsearch index rotation period. Index rotation appends a timestamp to the IndexName to facilitate the expiration of old data. For more information, see Index Rotation for the Amazon ES Destination . The default value is OneDay .
BufferingHints (dict) --
The buffering options. If no value is specified, the default values for ElasticsearchBufferingHints are used.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.
RetryOptions (dict) --
The retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon ES. The default value is 300 (5 minutes).
DurationInSeconds (integer) --
After an initial failure to deliver to Amazon ES, the total amount of time during which Kinesis Data Firehose retries delivery (including the first attempt). After this time has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results in no retries.
S3BackupMode (string) --
Defines how documents should be delivered to Amazon S3. When it is set to FailedDocumentsOnly , Kinesis Data Firehose writes any documents that could not be indexed to the configured Amazon S3 destination, with elasticsearch-failed/ appended to the key prefix. When set to AllDocuments , Kinesis Data Firehose delivers all incoming records to Amazon S3, and also writes failed documents with elasticsearch-failed/ appended to the prefix. For more information, see Amazon S3 Backup for the Amazon ES Destination . Default value is FailedDocumentsOnly .
S3Configuration (dict) -- [REQUIRED]
The configuration for the backup Amazon S3 location.
RoleARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) -- [REQUIRED]
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) -- [REQUIRED]
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) -- [REQUIRED]
The name of the parameter.
ParameterValue (string) -- [REQUIRED]
The parameter value.
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
dict
The destination in Splunk. You can specify only one destination.
HECEndpoint (string) -- [REQUIRED]
The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends your data.
HECEndpointType (string) -- [REQUIRED]
This type can be either "Raw" or "Event."
HECToken (string) -- [REQUIRED]
This is a GUID that you obtain from your Splunk cluster when you create a new HEC endpoint.
HECAcknowledgmentTimeoutInSeconds (integer) --
The amount of time that Kinesis Data Firehose waits to receive an acknowledgment from Splunk after it sends it data. At the end of the timeout period, Kinesis Data Firehose either tries to send the data again or considers it an error, based on your retry settings.
RetryOptions (dict) --
The retry behavior in case Kinesis Data Firehose is unable to deliver data to Splunk, or if it doesn't receive an acknowledgment of receipt from Splunk.
DurationInSeconds (integer) --
The total amount of time that Kinesis Data Firehose spends on retries. This duration starts after the initial attempt to send data to Splunk fails. It doesn't include the periods during which Kinesis Data Firehose waits for acknowledgment from Splunk after each attempt.
S3BackupMode (string) --
Defines how documents should be delivered to Amazon S3. When set to FailedDocumentsOnly , Kinesis Data Firehose writes any data that could not be indexed to the configured Amazon S3 destination. When set to AllDocuments , Kinesis Data Firehose delivers all incoming records to Amazon S3, and also writes failed documents to Amazon S3. Default value is FailedDocumentsOnly .
S3Configuration (dict) -- [REQUIRED]
The configuration for the backup Amazon S3 location.
RoleARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) -- [REQUIRED]
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) -- [REQUIRED]
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) -- [REQUIRED]
The name of the parameter.
ParameterValue (string) -- [REQUIRED]
The parameter value.
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
list
A set of tags to assign to the delivery stream. A tag is a key-value pair that you can define and assign to AWS resources. Tags are metadata. For example, you can add friendly names and descriptions or other types of information that can help you distinguish the delivery stream. For more information about tags, see Using Cost Allocation Tags in the AWS Billing and Cost Management User Guide.
You can specify up to 50 tags when creating a delivery stream.
(dict) --
Metadata that you can assign to a delivery stream, consisting of a key-value pair.
Key (string) -- [REQUIRED]
A unique identifier for the tag. Maximum length: 128 characters. Valid characters: Unicode letters, digits, white space, _ . / = + - % @
Value (string) --
An optional string, which you can use to describe or define the tag. Maximum length: 256 characters. Valid characters: Unicode letters, digits, white space, _ . / = + - % @
dict
Response Syntax
{
'DeliveryStreamARN': 'string'
}
Response Structure
(dict) --
DeliveryStreamARN (string) --
The ARN of the delivery stream.
{'DeliveryStreamDescription': {'Destinations': {'ElasticsearchDestinationDescription': {'ClusterEndpoint': 'string'}}}}
Describes the specified delivery stream and gets the status. For example, after your delivery stream is created, call DescribeDeliveryStream to see whether the delivery stream is ACTIVE and therefore ready for data to be sent to it.
See also: AWS API Documentation
Request Syntax
client.describe_delivery_stream(
DeliveryStreamName='string',
Limit=123,
ExclusiveStartDestinationId='string'
)
string
[REQUIRED]
The name of the delivery stream.
integer
The limit on the number of destinations to return. You can have one destination per delivery stream.
string
The ID of the destination to start returning the destination information. Kinesis Data Firehose supports one destination per delivery stream.
dict
Response Syntax
{
'DeliveryStreamDescription': {
'DeliveryStreamName': 'string',
'DeliveryStreamARN': 'string',
'DeliveryStreamStatus': 'CREATING'|'DELETING'|'ACTIVE',
'DeliveryStreamEncryptionConfiguration': {
'Status': 'ENABLED'|'ENABLING'|'DISABLED'|'DISABLING'
},
'DeliveryStreamType': 'DirectPut'|'KinesisStreamAsSource',
'VersionId': 'string',
'CreateTimestamp': datetime(2015, 1, 1),
'LastUpdateTimestamp': datetime(2015, 1, 1),
'Source': {
'KinesisStreamSourceDescription': {
'KinesisStreamARN': 'string',
'RoleARN': 'string',
'DeliveryStartTimestamp': datetime(2015, 1, 1)
}
},
'Destinations': [
{
'DestinationId': 'string',
'S3DestinationDescription': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ExtendedS3DestinationDescription': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'S3BackupMode': 'Disabled'|'Enabled',
'S3BackupDescription': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'DataFormatConversionConfiguration': {
'SchemaConfiguration': {
'RoleARN': 'string',
'CatalogId': 'string',
'DatabaseName': 'string',
'TableName': 'string',
'Region': 'string',
'VersionId': 'string'
},
'InputFormatConfiguration': {
'Deserializer': {
'OpenXJsonSerDe': {
'ConvertDotsInJsonKeysToUnderscores': True|False,
'CaseInsensitive': True|False,
'ColumnToJsonKeyMappings': {
'string': 'string'
}
},
'HiveJsonSerDe': {
'TimestampFormats': [
'string',
]
}
}
},
'OutputFormatConfiguration': {
'Serializer': {
'ParquetSerDe': {
'BlockSizeBytes': 123,
'PageSizeBytes': 123,
'Compression': 'UNCOMPRESSED'|'GZIP'|'SNAPPY',
'EnableDictionaryCompression': True|False,
'MaxPaddingBytes': 123,
'WriterVersion': 'V1'|'V2'
},
'OrcSerDe': {
'StripeSizeBytes': 123,
'BlockSizeBytes': 123,
'RowIndexStride': 123,
'EnablePadding': True|False,
'PaddingTolerance': 123.0,
'Compression': 'NONE'|'ZLIB'|'SNAPPY',
'BloomFilterColumns': [
'string',
],
'BloomFilterFalsePositiveProbability': 123.0,
'DictionaryKeyThreshold': 123.0,
'FormatVersion': 'V0_11'|'V0_12'
}
}
},
'Enabled': True|False
}
},
'RedshiftDestinationDescription': {
'RoleARN': 'string',
'ClusterJDBCURL': 'string',
'CopyCommand': {
'DataTableName': 'string',
'DataTableColumns': 'string',
'CopyOptions': 'string'
},
'Username': 'string',
'RetryOptions': {
'DurationInSeconds': 123
},
'S3DestinationDescription': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'S3BackupMode': 'Disabled'|'Enabled',
'S3BackupDescription': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ElasticsearchDestinationDescription': {
'RoleARN': 'string',
'DomainARN': 'string',
'ClusterEndpoint': 'string',
'IndexName': 'string',
'TypeName': 'string',
'IndexRotationPeriod': 'NoRotation'|'OneHour'|'OneDay'|'OneWeek'|'OneMonth',
'BufferingHints': {
'IntervalInSeconds': 123,
'SizeInMBs': 123
},
'RetryOptions': {
'DurationInSeconds': 123
},
'S3BackupMode': 'FailedDocumentsOnly'|'AllDocuments',
'S3DestinationDescription': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'SplunkDestinationDescription': {
'HECEndpoint': 'string',
'HECEndpointType': 'Raw'|'Event',
'HECToken': 'string',
'HECAcknowledgmentTimeoutInSeconds': 123,
'RetryOptions': {
'DurationInSeconds': 123
},
'S3BackupMode': 'FailedEventsOnly'|'AllEvents',
'S3DestinationDescription': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
}
},
],
'HasMoreDestinations': True|False
}
}
Response Structure
(dict) --
DeliveryStreamDescription (dict) --
Information about the delivery stream.
DeliveryStreamName (string) --
The name of the delivery stream.
DeliveryStreamARN (string) --
The Amazon Resource Name (ARN) of the delivery stream. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
DeliveryStreamStatus (string) --
The status of the delivery stream.
DeliveryStreamEncryptionConfiguration (dict) --
Indicates the server-side encryption (SSE) status for the delivery stream.
Status (string) --
For a full description of the different values of this status, see StartDeliveryStreamEncryption and StopDeliveryStreamEncryption .
DeliveryStreamType (string) --
The delivery stream type. This can be one of the following values:
DirectPut : Provider applications access the delivery stream directly.
KinesisStreamAsSource : The delivery stream uses a Kinesis data stream as a source.
VersionId (string) --
Each time the destination is updated for a delivery stream, the version ID is changed, and the current version ID is required when updating the destination. This is so that the service knows it is applying the changes to the correct version of the delivery stream.
CreateTimestamp (datetime) --
The date and time that the delivery stream was created.
LastUpdateTimestamp (datetime) --
The date and time that the delivery stream was last updated.
Source (dict) --
If the DeliveryStreamType parameter is KinesisStreamAsSource , a SourceDescription object describing the source Kinesis data stream.
KinesisStreamSourceDescription (dict) --
The KinesisStreamSourceDescription value for the source Kinesis data stream.
KinesisStreamARN (string) --
The Amazon Resource Name (ARN) of the source Kinesis data stream. For more information, see Amazon Kinesis Data Streams ARN Format .
RoleARN (string) --
The ARN of the role used by the source Kinesis data stream. For more information, see AWS Identity and Access Management (IAM) ARN Format .
DeliveryStartTimestamp (datetime) --
Kinesis Data Firehose starts retrieving records from the Kinesis data stream starting with this timestamp.
Destinations (list) --
The destinations.
(dict) --
Describes the destination for a delivery stream.
DestinationId (string) --
The ID of the destination.
S3DestinationDescription (dict) --
[Deprecated] The destination in Amazon S3.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) --
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ExtendedS3DestinationDescription (dict) --
The destination in Amazon S3.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) --
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) --
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) --
The name of the parameter.
ParameterValue (string) --
The parameter value.
S3BackupMode (string) --
The Amazon S3 backup mode.
S3BackupDescription (dict) --
The configuration for backup in Amazon S3.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) --
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
DataFormatConversionConfiguration (dict) --
The serializer, deserializer, and schema for converting data from the JSON format to the Parquet or ORC format before writing it to Amazon S3.
SchemaConfiguration (dict) --
Specifies the AWS Glue Data Catalog table that contains the column information.
RoleARN (string) --
The role that Kinesis Data Firehose can use to access AWS Glue. This role must be in the same account you use for Kinesis Data Firehose. Cross-account roles aren't allowed.
CatalogId (string) --
The ID of the AWS Glue Data Catalog. If you don't supply this, the AWS account ID is used by default.
DatabaseName (string) --
Specifies the name of the AWS Glue database that contains the schema for the output data.
TableName (string) --
Specifies the AWS Glue table that contains the column information that constitutes your data schema.
Region (string) --
If you don't specify an AWS Region, the default is the current Region.
VersionId (string) --
Specifies the table version for the output data schema. If you don't specify this version ID, or if you set it to LATEST , Kinesis Data Firehose uses the most recent version. This means that any updates to the table are automatically picked up.
InputFormatConfiguration (dict) --
Specifies the deserializer that you want Kinesis Data Firehose to use to convert the format of your data from JSON.
Deserializer (dict) --
Specifies which deserializer to use. You can choose either the Apache Hive JSON SerDe or the OpenX JSON SerDe. If both are non-null, the server rejects the request.
OpenXJsonSerDe (dict) --
The OpenX SerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the native Hive / HCatalog JsonSerDe.
ConvertDotsInJsonKeysToUnderscores (boolean) --
When set to true , specifies that the names of the keys include dots and that you want Kinesis Data Firehose to replace them with underscores. This is useful because Apache Hive does not allow dots in column names. For example, if the JSON contains a key whose name is "a.b", you can define the column name to be "a_b" when using this option.
The default is false .
CaseInsensitive (boolean) --
When set to true , which is the default, Kinesis Data Firehose converts JSON keys to lowercase before deserializing them.
ColumnToJsonKeyMappings (dict) --
Maps column names to JSON keys that aren't identical to the column names. This is useful when the JSON contains keys that are Hive keywords. For example, timestamp is a Hive keyword. If you have a JSON key named timestamp , set this parameter to {"ts": "timestamp"} to map this key to a column named ts .
(string) --
(string) --
HiveJsonSerDe (dict) --
The native Hive / HCatalog JsonSerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the OpenX SerDe.
TimestampFormats (list) --
Indicates how you want Kinesis Data Firehose to parse the date and timestamps that may be present in your input data JSON. To specify these format strings, follow the pattern syntax of JodaTime's DateTimeFormat format strings. For more information, see Class DateTimeFormat . You can also use the special value millis to parse timestamps in epoch milliseconds. If you don't specify a format, Kinesis Data Firehose uses java.sql.Timestamp::valueOf by default.
(string) --
OutputFormatConfiguration (dict) --
Specifies the serializer that you want Kinesis Data Firehose to use to convert the format of your data to the Parquet or ORC format.
Serializer (dict) --
Specifies which serializer to use. You can choose either the ORC SerDe or the Parquet SerDe. If both are non-null, the server rejects the request.
ParquetSerDe (dict) --
A serializer to use for converting data to the Parquet format before storing it in Amazon S3. For more information, see Apache Parquet .
BlockSizeBytes (integer) --
The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.
PageSizeBytes (integer) --
The Parquet page size. Column chunks are divided into pages. A page is conceptually an indivisible unit (in terms of compression and encoding). The minimum value is 64 KiB and the default is 1 MiB.
Compression (string) --
The compression code to use over data blocks. The possible values are UNCOMPRESSED , SNAPPY , and GZIP , with the default being SNAPPY . Use SNAPPY for higher decompression speed. Use GZIP if the compression ration is more important than speed.
EnableDictionaryCompression (boolean) --
Indicates whether to enable dictionary compression.
MaxPaddingBytes (integer) --
The maximum amount of padding to apply. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 0.
WriterVersion (string) --
Indicates the version of row format to output. The possible values are V1 and V2 . The default is V1 .
OrcSerDe (dict) --
A serializer to use for converting data to the ORC format before storing it in Amazon S3. For more information, see Apache ORC .
StripeSizeBytes (integer) --
The number of bytes in each stripe. The default is 64 MiB and the minimum is 8 MiB.
BlockSizeBytes (integer) --
The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.
RowIndexStride (integer) --
The number of rows between index entries. The default is 10,000 and the minimum is 1,000.
EnablePadding (boolean) --
Set this to true to indicate that you want stripes to be padded to the HDFS block boundaries. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is false .
PaddingTolerance (float) --
A number between 0 and 1 that defines the tolerance for block padding as a decimal fraction of stripe size. The default value is 0.05, which means 5 percent of stripe size.
For the default values of 64 MiB ORC stripes and 256 MiB HDFS blocks, the default block padding tolerance of 5 percent reserves a maximum of 3.2 MiB for padding within the 256 MiB block. In such a case, if the available size within the block is more than 3.2 MiB, a new, smaller stripe is inserted to fit within that space. This ensures that no stripe crosses block boundaries and causes remote reads within a node-local task.
Kinesis Data Firehose ignores this parameter when OrcSerDe$EnablePadding is false .
Compression (string) --
The compression code to use over data blocks. The default is SNAPPY .
BloomFilterColumns (list) --
The column names for which you want Kinesis Data Firehose to create bloom filters. The default is null .
(string) --
BloomFilterFalsePositiveProbability (float) --
The Bloom filter false positive probability (FPP). The lower the FPP, the bigger the Bloom filter. The default value is 0.05, the minimum is 0, and the maximum is 1.
DictionaryKeyThreshold (float) --
Represents the fraction of the total number of non-null rows. To turn off dictionary encoding, set this fraction to a number that is less than the number of distinct keys in a dictionary. To always use dictionary encoding, set this threshold to 1.
FormatVersion (string) --
The version of the file to write. The possible values are V0_11 and V0_12 . The default is V0_12 .
Enabled (boolean) --
Defaults to true . Set it to false if you want to disable format conversion while preserving the configuration details.
RedshiftDestinationDescription (dict) --
The destination in Amazon Redshift.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
ClusterJDBCURL (string) --
The database connection string.
CopyCommand (dict) --
The COPY command.
DataTableName (string) --
The name of the target table. The table must already exist in the database.
DataTableColumns (string) --
A comma-separated list of column names.
CopyOptions (string) --
Optional parameters to use with the Amazon Redshift COPY command. For more information, see the "Optional Parameters" section of Amazon Redshift COPY command . Some possible examples that would apply to Kinesis Data Firehose are as follows:
delimiter '\t' lzop; - fields are delimited with "t" (TAB character) and compressed using lzop.
delimiter '|' - fields are delimited with "|" (this is the default delimiter).
delimiter '|' escape - the delimiter should be escaped.
fixedwidth 'venueid:3,venuename:25,venuecity:12,venuestate:2,venueseats:6' - fields are fixed width in the source, with each width specified after every column in the table.
JSON 's3://mybucket/jsonpaths.txt' - data is in JSON format, and the path specified is the format of the data.
For more examples, see Amazon Redshift COPY command examples .
Username (string) --
The name of the user.
RetryOptions (dict) --
The retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon Redshift. Default value is 3600 (60 minutes).
DurationInSeconds (integer) --
The length of time during which Kinesis Data Firehose retries delivery after a failure, starting from the initial request and including the first attempt. The default value is 3600 seconds (60 minutes). Kinesis Data Firehose does not retry if the value of DurationInSeconds is 0 (zero) or if the first delivery attempt takes longer than the current value.
S3DestinationDescription (dict) --
The Amazon S3 destination.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) --
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) --
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) --
The name of the parameter.
ParameterValue (string) --
The parameter value.
S3BackupMode (string) --
The Amazon S3 backup mode.
S3BackupDescription (dict) --
The configuration for backup in Amazon S3.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) --
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ElasticsearchDestinationDescription (dict) --
The destination in Amazon ES.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
DomainARN (string) --
The ARN of the Amazon ES domain. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Kinesis Data Firehose uses either ClusterEndpoint or DomainARN to send data to Amazon ES.
ClusterEndpoint (string) --
The endpoint to use when communicating with the cluster. Kinesis Data Firehose uses either this ClusterEndpoint or the DomainARN field to send data to Amazon ES.
IndexName (string) --
The Elasticsearch index name.
TypeName (string) --
The Elasticsearch type name.
IndexRotationPeriod (string) --
The Elasticsearch index rotation period
BufferingHints (dict) --
The buffering options.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.
RetryOptions (dict) --
The Amazon ES retry options.
DurationInSeconds (integer) --
After an initial failure to deliver to Amazon ES, the total amount of time during which Kinesis Data Firehose retries delivery (including the first attempt). After this time has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results in no retries.
S3BackupMode (string) --
The Amazon S3 backup mode.
S3DestinationDescription (dict) --
The Amazon S3 destination.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) --
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) --
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) --
The name of the parameter.
ParameterValue (string) --
The parameter value.
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
SplunkDestinationDescription (dict) --
The destination in Splunk.
HECEndpoint (string) --
The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends your data.
HECEndpointType (string) --
This type can be either "Raw" or "Event."
HECToken (string) --
A GUID you obtain from your Splunk cluster when you create a new HEC endpoint.
HECAcknowledgmentTimeoutInSeconds (integer) --
The amount of time that Kinesis Data Firehose waits to receive an acknowledgment from Splunk after it sends it data. At the end of the timeout period, Kinesis Data Firehose either tries to send the data again or considers it an error, based on your retry settings.
RetryOptions (dict) --
The retry behavior in case Kinesis Data Firehose is unable to deliver data to Splunk or if it doesn't receive an acknowledgment of receipt from Splunk.
DurationInSeconds (integer) --
The total amount of time that Kinesis Data Firehose spends on retries. This duration starts after the initial attempt to send data to Splunk fails. It doesn't include the periods during which Kinesis Data Firehose waits for acknowledgment from Splunk after each attempt.
S3BackupMode (string) --
Defines how documents should be delivered to Amazon S3. When set to FailedDocumentsOnly , Kinesis Data Firehose writes any data that could not be indexed to the configured Amazon S3 destination. When set to AllDocuments , Kinesis Data Firehose delivers all incoming records to Amazon S3, and also writes failed documents to Amazon S3. Default value is FailedDocumentsOnly .
S3DestinationDescription (dict) --
The Amazon S3 destination.>
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) --
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) --
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) --
The name of the parameter.
ParameterValue (string) --
The parameter value.
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
HasMoreDestinations (boolean) --
Indicates whether there are more destinations available to list.
{'ElasticsearchDestinationUpdate': {'ClusterEndpoint': 'string'}}
Updates the specified destination of the specified delivery stream.
Use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while the configurations are updated, so data writes to the delivery stream can continue during this process. The updated configurations are usually effective within a few minutes.
Switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only update to another Amazon ES destination.
If the destination type is the same, Kinesis Data Firehose merges the configuration parameters specified with the destination configuration that already exists on the delivery stream. If any of the parameters are not specified in the call, the existing values are retained. For example, in the Amazon S3 destination, if EncryptionConfiguration is not specified, then the existing EncryptionConfiguration is maintained on the destination.
If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift, Kinesis Data Firehose does not merge any parameters. In this case, all parameters must be specified.
Kinesis Data Firehose uses CurrentDeliveryStreamVersionId to avoid race conditions and conflicting merges. This is a required field, and the service updates the configuration only if the existing configuration has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be retrieved using DescribeDeliveryStream . Use the new version ID to set CurrentDeliveryStreamVersionId in the next call.
See also: AWS API Documentation
Request Syntax
client.update_destination(
DeliveryStreamName='string',
CurrentDeliveryStreamVersionId='string',
DestinationId='string',
S3DestinationUpdate={
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
ExtendedS3DestinationUpdate={
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'S3BackupMode': 'Disabled'|'Enabled',
'S3BackupUpdate': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'DataFormatConversionConfiguration': {
'SchemaConfiguration': {
'RoleARN': 'string',
'CatalogId': 'string',
'DatabaseName': 'string',
'TableName': 'string',
'Region': 'string',
'VersionId': 'string'
},
'InputFormatConfiguration': {
'Deserializer': {
'OpenXJsonSerDe': {
'ConvertDotsInJsonKeysToUnderscores': True|False,
'CaseInsensitive': True|False,
'ColumnToJsonKeyMappings': {
'string': 'string'
}
},
'HiveJsonSerDe': {
'TimestampFormats': [
'string',
]
}
}
},
'OutputFormatConfiguration': {
'Serializer': {
'ParquetSerDe': {
'BlockSizeBytes': 123,
'PageSizeBytes': 123,
'Compression': 'UNCOMPRESSED'|'GZIP'|'SNAPPY',
'EnableDictionaryCompression': True|False,
'MaxPaddingBytes': 123,
'WriterVersion': 'V1'|'V2'
},
'OrcSerDe': {
'StripeSizeBytes': 123,
'BlockSizeBytes': 123,
'RowIndexStride': 123,
'EnablePadding': True|False,
'PaddingTolerance': 123.0,
'Compression': 'NONE'|'ZLIB'|'SNAPPY',
'BloomFilterColumns': [
'string',
],
'BloomFilterFalsePositiveProbability': 123.0,
'DictionaryKeyThreshold': 123.0,
'FormatVersion': 'V0_11'|'V0_12'
}
}
},
'Enabled': True|False
}
},
RedshiftDestinationUpdate={
'RoleARN': 'string',
'ClusterJDBCURL': 'string',
'CopyCommand': {
'DataTableName': 'string',
'DataTableColumns': 'string',
'CopyOptions': 'string'
},
'Username': 'string',
'Password': 'string',
'RetryOptions': {
'DurationInSeconds': 123
},
'S3Update': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'S3BackupMode': 'Disabled'|'Enabled',
'S3BackupUpdate': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
ElasticsearchDestinationUpdate={
'RoleARN': 'string',
'DomainARN': 'string',
'ClusterEndpoint': 'string',
'IndexName': 'string',
'TypeName': 'string',
'IndexRotationPeriod': 'NoRotation'|'OneHour'|'OneDay'|'OneWeek'|'OneMonth',
'BufferingHints': {
'IntervalInSeconds': 123,
'SizeInMBs': 123
},
'RetryOptions': {
'DurationInSeconds': 123
},
'S3Update': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
SplunkDestinationUpdate={
'HECEndpoint': 'string',
'HECEndpointType': 'Raw'|'Event',
'HECToken': 'string',
'HECAcknowledgmentTimeoutInSeconds': 123,
'RetryOptions': {
'DurationInSeconds': 123
},
'S3BackupMode': 'FailedEventsOnly'|'AllEvents',
'S3Update': {
'RoleARN': 'string',
'BucketARN': 'string',
'Prefix': 'string',
'ErrorOutputPrefix': 'string',
'BufferingHints': {
'SizeInMBs': 123,
'IntervalInSeconds': 123
},
'CompressionFormat': 'UNCOMPRESSED'|'GZIP'|'ZIP'|'Snappy',
'EncryptionConfiguration': {
'NoEncryptionConfig': 'NoEncryption',
'KMSEncryptionConfig': {
'AWSKMSKeyARN': 'string'
}
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
},
'ProcessingConfiguration': {
'Enabled': True|False,
'Processors': [
{
'Type': 'Lambda',
'Parameters': [
{
'ParameterName': 'LambdaArn'|'NumberOfRetries'|'RoleArn'|'BufferSizeInMBs'|'BufferIntervalInSeconds',
'ParameterValue': 'string'
},
]
},
]
},
'CloudWatchLoggingOptions': {
'Enabled': True|False,
'LogGroupName': 'string',
'LogStreamName': 'string'
}
}
)
string
[REQUIRED]
The name of the delivery stream.
string
[REQUIRED]
Obtain this value from the VersionId result of DeliveryStreamDescription . This value is required, and helps the service perform conditional operations. For example, if there is an interleaving update and this value is null, then the update destination fails. After the update is successful, the VersionId value is updated. The service then performs a merge of the old configuration with the new configuration.
string
[REQUIRED]
The ID of the destination.
dict
[Deprecated] Describes an update for a destination in Amazon S3.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
dict
Describes an update for a destination in Amazon S3.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) -- [REQUIRED]
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) -- [REQUIRED]
The name of the parameter.
ParameterValue (string) -- [REQUIRED]
The parameter value.
S3BackupMode (string) --
Enables or disables Amazon S3 backup mode.
S3BackupUpdate (dict) --
The Amazon S3 destination for backup.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
DataFormatConversionConfiguration (dict) --
The serializer, deserializer, and schema for converting data from the JSON format to the Parquet or ORC format before writing it to Amazon S3.
SchemaConfiguration (dict) --
Specifies the AWS Glue Data Catalog table that contains the column information.
RoleARN (string) --
The role that Kinesis Data Firehose can use to access AWS Glue. This role must be in the same account you use for Kinesis Data Firehose. Cross-account roles aren't allowed.
CatalogId (string) --
The ID of the AWS Glue Data Catalog. If you don't supply this, the AWS account ID is used by default.
DatabaseName (string) --
Specifies the name of the AWS Glue database that contains the schema for the output data.
TableName (string) --
Specifies the AWS Glue table that contains the column information that constitutes your data schema.
Region (string) --
If you don't specify an AWS Region, the default is the current Region.
VersionId (string) --
Specifies the table version for the output data schema. If you don't specify this version ID, or if you set it to LATEST , Kinesis Data Firehose uses the most recent version. This means that any updates to the table are automatically picked up.
InputFormatConfiguration (dict) --
Specifies the deserializer that you want Kinesis Data Firehose to use to convert the format of your data from JSON.
Deserializer (dict) --
Specifies which deserializer to use. You can choose either the Apache Hive JSON SerDe or the OpenX JSON SerDe. If both are non-null, the server rejects the request.
OpenXJsonSerDe (dict) --
The OpenX SerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the native Hive / HCatalog JsonSerDe.
ConvertDotsInJsonKeysToUnderscores (boolean) --
When set to true , specifies that the names of the keys include dots and that you want Kinesis Data Firehose to replace them with underscores. This is useful because Apache Hive does not allow dots in column names. For example, if the JSON contains a key whose name is "a.b", you can define the column name to be "a_b" when using this option.
The default is false .
CaseInsensitive (boolean) --
When set to true , which is the default, Kinesis Data Firehose converts JSON keys to lowercase before deserializing them.
ColumnToJsonKeyMappings (dict) --
Maps column names to JSON keys that aren't identical to the column names. This is useful when the JSON contains keys that are Hive keywords. For example, timestamp is a Hive keyword. If you have a JSON key named timestamp , set this parameter to {"ts": "timestamp"} to map this key to a column named ts .
(string) --
(string) --
HiveJsonSerDe (dict) --
The native Hive / HCatalog JsonSerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the OpenX SerDe.
TimestampFormats (list) --
Indicates how you want Kinesis Data Firehose to parse the date and timestamps that may be present in your input data JSON. To specify these format strings, follow the pattern syntax of JodaTime's DateTimeFormat format strings. For more information, see Class DateTimeFormat . You can also use the special value millis to parse timestamps in epoch milliseconds. If you don't specify a format, Kinesis Data Firehose uses java.sql.Timestamp::valueOf by default.
(string) --
OutputFormatConfiguration (dict) --
Specifies the serializer that you want Kinesis Data Firehose to use to convert the format of your data to the Parquet or ORC format.
Serializer (dict) --
Specifies which serializer to use. You can choose either the ORC SerDe or the Parquet SerDe. If both are non-null, the server rejects the request.
ParquetSerDe (dict) --
A serializer to use for converting data to the Parquet format before storing it in Amazon S3. For more information, see Apache Parquet .
BlockSizeBytes (integer) --
The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.
PageSizeBytes (integer) --
The Parquet page size. Column chunks are divided into pages. A page is conceptually an indivisible unit (in terms of compression and encoding). The minimum value is 64 KiB and the default is 1 MiB.
Compression (string) --
The compression code to use over data blocks. The possible values are UNCOMPRESSED , SNAPPY , and GZIP , with the default being SNAPPY . Use SNAPPY for higher decompression speed. Use GZIP if the compression ration is more important than speed.
EnableDictionaryCompression (boolean) --
Indicates whether to enable dictionary compression.
MaxPaddingBytes (integer) --
The maximum amount of padding to apply. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 0.
WriterVersion (string) --
Indicates the version of row format to output. The possible values are V1 and V2 . The default is V1 .
OrcSerDe (dict) --
A serializer to use for converting data to the ORC format before storing it in Amazon S3. For more information, see Apache ORC .
StripeSizeBytes (integer) --
The number of bytes in each stripe. The default is 64 MiB and the minimum is 8 MiB.
BlockSizeBytes (integer) --
The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.
RowIndexStride (integer) --
The number of rows between index entries. The default is 10,000 and the minimum is 1,000.
EnablePadding (boolean) --
Set this to true to indicate that you want stripes to be padded to the HDFS block boundaries. This is useful if you intend to copy the data from Amazon S3 to HDFS before querying. The default is false .
PaddingTolerance (float) --
A number between 0 and 1 that defines the tolerance for block padding as a decimal fraction of stripe size. The default value is 0.05, which means 5 percent of stripe size.
For the default values of 64 MiB ORC stripes and 256 MiB HDFS blocks, the default block padding tolerance of 5 percent reserves a maximum of 3.2 MiB for padding within the 256 MiB block. In such a case, if the available size within the block is more than 3.2 MiB, a new, smaller stripe is inserted to fit within that space. This ensures that no stripe crosses block boundaries and causes remote reads within a node-local task.
Kinesis Data Firehose ignores this parameter when OrcSerDe$EnablePadding is false .
Compression (string) --
The compression code to use over data blocks. The default is SNAPPY .
BloomFilterColumns (list) --
The column names for which you want Kinesis Data Firehose to create bloom filters. The default is null .
(string) --
BloomFilterFalsePositiveProbability (float) --
The Bloom filter false positive probability (FPP). The lower the FPP, the bigger the Bloom filter. The default value is 0.05, the minimum is 0, and the maximum is 1.
DictionaryKeyThreshold (float) --
Represents the fraction of the total number of non-null rows. To turn off dictionary encoding, set this fraction to a number that is less than the number of distinct keys in a dictionary. To always use dictionary encoding, set this threshold to 1.
FormatVersion (string) --
The version of the file to write. The possible values are V0_11 and V0_12 . The default is V0_12 .
Enabled (boolean) --
Defaults to true . Set it to false if you want to disable format conversion while preserving the configuration details.
dict
Describes an update for a destination in Amazon Redshift.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
ClusterJDBCURL (string) --
The database connection string.
CopyCommand (dict) --
The COPY command.
DataTableName (string) -- [REQUIRED]
The name of the target table. The table must already exist in the database.
DataTableColumns (string) --
A comma-separated list of column names.
CopyOptions (string) --
Optional parameters to use with the Amazon Redshift COPY command. For more information, see the "Optional Parameters" section of Amazon Redshift COPY command . Some possible examples that would apply to Kinesis Data Firehose are as follows:
delimiter '\t' lzop; - fields are delimited with "t" (TAB character) and compressed using lzop.
delimiter '|' - fields are delimited with "|" (this is the default delimiter).
delimiter '|' escape - the delimiter should be escaped.
fixedwidth 'venueid:3,venuename:25,venuecity:12,venuestate:2,venueseats:6' - fields are fixed width in the source, with each width specified after every column in the table.
JSON 's3://mybucket/jsonpaths.txt' - data is in JSON format, and the path specified is the format of the data.
For more examples, see Amazon Redshift COPY command examples .
Username (string) --
The name of the user.
Password (string) --
The user password.
RetryOptions (dict) --
The retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon Redshift. Default value is 3600 (60 minutes).
DurationInSeconds (integer) --
The length of time during which Kinesis Data Firehose retries delivery after a failure, starting from the initial request and including the first attempt. The default value is 3600 seconds (60 minutes). Kinesis Data Firehose does not retry if the value of DurationInSeconds is 0 (zero) or if the first delivery attempt takes longer than the current value.
S3Update (dict) --
The Amazon S3 destination.
The compression formats SNAPPY or ZIP cannot be specified in RedshiftDestinationUpdate.S3Update because the Amazon Redshift COPY operation that reads from the S3 bucket doesn't support these compression formats.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) -- [REQUIRED]
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) -- [REQUIRED]
The name of the parameter.
ParameterValue (string) -- [REQUIRED]
The parameter value.
S3BackupMode (string) --
The Amazon S3 backup mode.
S3BackupUpdate (dict) --
The Amazon S3 destination for backup.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
dict
Describes an update for a destination in Amazon ES.
RoleARN (string) --
The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose for calling the Amazon ES Configuration API and for indexing documents. For more information, see Grant Kinesis Data Firehose Access to an Amazon S3 Destination and Amazon Resource Names (ARNs) and AWS Service Namespaces .
DomainARN (string) --
The ARN of the Amazon ES domain. The IAM role must have permissions for DescribeElasticsearchDomain , DescribeElasticsearchDomains , and DescribeElasticsearchDomainConfig after assuming the IAM role specified in RoleARN . For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Specify either ClusterEndpoint or DomainARN .
ClusterEndpoint (string) --
The endpoint to use when communicating with the cluster. Specify either this ClusterEndpoint or the DomainARN field.
IndexName (string) --
The Elasticsearch index name.
TypeName (string) --
The Elasticsearch type name. For Elasticsearch 6.x, there can be only one type per index. If you try to specify a new type for an existing index that already has another type, Kinesis Data Firehose returns an error during runtime.
IndexRotationPeriod (string) --
The Elasticsearch index rotation period. Index rotation appends a timestamp to IndexName to facilitate the expiration of old data. For more information, see Index Rotation for the Amazon ES Destination . Default value is OneDay .
BufferingHints (dict) --
The buffering options. If no value is specified, ElasticsearchBufferingHints object default values are used.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300 (5 minutes).
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MBs, before delivering it to the destination. The default value is 5.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the value should be 10 MB or higher.
RetryOptions (dict) --
The retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon ES. The default value is 300 (5 minutes).
DurationInSeconds (integer) --
After an initial failure to deliver to Amazon ES, the total amount of time during which Kinesis Data Firehose retries delivery (including the first attempt). After this time has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results in no retries.
S3Update (dict) --
The Amazon S3 destination.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) -- [REQUIRED]
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) -- [REQUIRED]
The name of the parameter.
ParameterValue (string) -- [REQUIRED]
The parameter value.
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
dict
Describes an update for a destination in Splunk.
HECEndpoint (string) --
The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends your data.
HECEndpointType (string) --
This type can be either "Raw" or "Event."
HECToken (string) --
A GUID that you obtain from your Splunk cluster when you create a new HEC endpoint.
HECAcknowledgmentTimeoutInSeconds (integer) --
The amount of time that Kinesis Data Firehose waits to receive an acknowledgment from Splunk after it sends data. At the end of the timeout period, Kinesis Data Firehose either tries to send the data again or considers it an error, based on your retry settings.
RetryOptions (dict) --
The retry behavior in case Kinesis Data Firehose is unable to deliver data to Splunk or if it doesn't receive an acknowledgment of receipt from Splunk.
DurationInSeconds (integer) --
The total amount of time that Kinesis Data Firehose spends on retries. This duration starts after the initial attempt to send data to Splunk fails. It doesn't include the periods during which Kinesis Data Firehose waits for acknowledgment from Splunk after each attempt.
S3BackupMode (string) --
Defines how documents should be delivered to Amazon S3. When set to FailedDocumentsOnly , Kinesis Data Firehose writes any data that could not be indexed to the configured Amazon S3 destination. When set to AllDocuments , Kinesis Data Firehose delivers all incoming records to Amazon S3, and also writes failed documents to Amazon S3. Default value is FailedDocumentsOnly .
S3Update (dict) --
Your update to the configuration of the backup Amazon S3 location.
RoleARN (string) --
The Amazon Resource Name (ARN) of the AWS credentials. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
BucketARN (string) --
The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
Prefix (string) --
The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3 files. You can also specify a custom prefix, as described in Custom Prefixes for Amazon S3 Objects .
ErrorOutputPrefix (string) --
A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing them to S3. This prefix appears immediately following the bucket name. For information about how to specify this prefix, see Custom Prefixes for Amazon S3 Objects .
BufferingHints (dict) --
The buffering option. If no value is specified, BufferingHints object default values are used.
SizeInMBs (integer) --
Buffer incoming data to the specified size, in MiBs, before delivering it to the destination. The default value is 5. This parameter is optional but if you specify a value for it, you must also specify a value for IntervalInSeconds , and vice versa.
We recommend setting this parameter to a value greater than the amount of data you typically ingest into the delivery stream in 10 seconds. For example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB or higher.
IntervalInSeconds (integer) --
Buffer incoming data for the specified period of time, in seconds, before delivering it to the destination. The default value is 300. This parameter is optional but if you specify a value for it, you must also specify a value for SizeInMBs , and vice versa.
CompressionFormat (string) --
The compression format. If no value is specified, the default is UNCOMPRESSED .
The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift destinations because they are not supported by the Amazon Redshift COPY operation that reads from the S3 bucket.
EncryptionConfiguration (dict) --
The encryption configuration. If no value is specified, the default is no encryption.
NoEncryptionConfig (string) --
Specifically override existing encryption information to ensure that no encryption is used.
KMSEncryptionConfig (dict) --
The encryption key.
AWSKMSKeyARN (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the encryption key. Must belong to the same AWS Region as the destination Amazon S3 bucket. For more information, see Amazon Resource Names (ARNs) and AWS Service Namespaces .
CloudWatchLoggingOptions (dict) --
The CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
ProcessingConfiguration (dict) --
The data processing configuration.
Enabled (boolean) --
Enables or disables data processing.
Processors (list) --
The data processors.
(dict) --
Describes a data processor.
Type (string) -- [REQUIRED]
The type of processor.
Parameters (list) --
The processor parameters.
(dict) --
Describes the processor parameter.
ParameterName (string) -- [REQUIRED]
The name of the parameter.
ParameterValue (string) -- [REQUIRED]
The parameter value.
CloudWatchLoggingOptions (dict) --
The Amazon CloudWatch logging options for your delivery stream.
Enabled (boolean) --
Enables or disables CloudWatch logging.
LogGroupName (string) --
The CloudWatch group name for logging. This value is required if CloudWatch logging is enabled.
LogStreamName (string) --
The CloudWatch log stream name for logging. This value is required if CloudWatch logging is enabled.
dict
Response Syntax
{}
Response Structure
(dict) --