2020/06/04 - Amazon Lightsail - 3 updated api methods
Changes This release adds the BurstCapacityPercentage and BurstCapacityTime instance metrics, which allow you to track the burst capacity available to your instance.
{'alarms': {'metricName': {'BurstCapacityTime', 'BurstCapacityPercentage'}}}
Returns information about the configured alarms. Specify an alarm name in your request to return information about a specific alarm, or specify a monitored resource name to return information about all alarms for a specific resource.
An alarm is used to monitor a single metric for one of your resources. When a metric condition is met, the alarm can notify you by email, SMS text message, and a banner displayed on the Amazon Lightsail console. For more information, see Alarms in Amazon Lightsail .
See also: AWS API Documentation
Request Syntax
client.get_alarms(
alarmName='string',
pageToken='string',
monitoredResourceName='string'
)
string
The name of the alarm.
Specify an alarm name to return information about a specific alarm.
string
The token to advance to the next page of results from your request.
To get a page token, perform an initial GetAlarms request. If your results are paginated, the response will return a next page token that you can specify as the page token in a subsequent request.
string
The name of the Lightsail resource being monitored by the alarm.
Specify a monitored resource name to return information about all alarms for a specific resource.
dict
Response Syntax
{
'alarms': [
{
'name': 'string',
'arn': 'string',
'createdAt': datetime(2015, 1, 1),
'location': {
'availabilityZone': 'string',
'regionName': 'us-east-1'|'us-east-2'|'us-west-1'|'us-west-2'|'eu-west-1'|'eu-west-2'|'eu-west-3'|'eu-central-1'|'ca-central-1'|'ap-south-1'|'ap-southeast-1'|'ap-southeast-2'|'ap-northeast-1'|'ap-northeast-2'
},
'resourceType': 'Instance'|'StaticIp'|'KeyPair'|'InstanceSnapshot'|'Domain'|'PeeredVpc'|'LoadBalancer'|'LoadBalancerTlsCertificate'|'Disk'|'DiskSnapshot'|'RelationalDatabase'|'RelationalDatabaseSnapshot'|'ExportSnapshotRecord'|'CloudFormationStackRecord'|'Alarm'|'ContactMethod',
'supportCode': 'string',
'monitoredResourceInfo': {
'arn': 'string',
'name': 'string',
'resourceType': 'Instance'|'StaticIp'|'KeyPair'|'InstanceSnapshot'|'Domain'|'PeeredVpc'|'LoadBalancer'|'LoadBalancerTlsCertificate'|'Disk'|'DiskSnapshot'|'RelationalDatabase'|'RelationalDatabaseSnapshot'|'ExportSnapshotRecord'|'CloudFormationStackRecord'|'Alarm'|'ContactMethod'
},
'comparisonOperator': 'GreaterThanOrEqualToThreshold'|'GreaterThanThreshold'|'LessThanThreshold'|'LessThanOrEqualToThreshold',
'evaluationPeriods': 123,
'period': 123,
'threshold': 123.0,
'datapointsToAlarm': 123,
'treatMissingData': 'breaching'|'notBreaching'|'ignore'|'missing',
'statistic': 'Minimum'|'Maximum'|'Sum'|'Average'|'SampleCount',
'metricName': 'CPUUtilization'|'NetworkIn'|'NetworkOut'|'StatusCheckFailed'|'StatusCheckFailed_Instance'|'StatusCheckFailed_System'|'ClientTLSNegotiationErrorCount'|'HealthyHostCount'|'UnhealthyHostCount'|'HTTPCode_LB_4XX_Count'|'HTTPCode_LB_5XX_Count'|'HTTPCode_Instance_2XX_Count'|'HTTPCode_Instance_3XX_Count'|'HTTPCode_Instance_4XX_Count'|'HTTPCode_Instance_5XX_Count'|'InstanceResponseTime'|'RejectedConnectionCount'|'RequestCount'|'DatabaseConnections'|'DiskQueueDepth'|'FreeStorageSpace'|'NetworkReceiveThroughput'|'NetworkTransmitThroughput'|'BurstCapacityTime'|'BurstCapacityPercentage',
'state': 'OK'|'ALARM'|'INSUFFICIENT_DATA',
'unit': 'Seconds'|'Microseconds'|'Milliseconds'|'Bytes'|'Kilobytes'|'Megabytes'|'Gigabytes'|'Terabytes'|'Bits'|'Kilobits'|'Megabits'|'Gigabits'|'Terabits'|'Percent'|'Count'|'Bytes/Second'|'Kilobytes/Second'|'Megabytes/Second'|'Gigabytes/Second'|'Terabytes/Second'|'Bits/Second'|'Kilobits/Second'|'Megabits/Second'|'Gigabits/Second'|'Terabits/Second'|'Count/Second'|'None',
'contactProtocols': [
'Email'|'SMS',
],
'notificationTriggers': [
'OK'|'ALARM'|'INSUFFICIENT_DATA',
],
'notificationEnabled': True|False
},
],
'nextPageToken': 'string'
}
Response Structure
(dict) --
alarms (list) --
An array of objects that describe the alarms.
(dict) --
Describes an alarm.
An alarm is a way to monitor your Amazon Lightsail resource metrics. For more information, see Alarms in Amazon Lightsail .
name (string) --
The name of the alarm.
arn (string) --
The Amazon Resource Name (ARN) of the alarm.
createdAt (datetime) --
The timestamp when the alarm was created.
location (dict) --
An object that lists information about the location of the alarm.
availabilityZone (string) --
The Availability Zone. Follows the format us-east-2a (case-sensitive).
regionName (string) --
The AWS Region name.
resourceType (string) --
The Lightsail resource type (e.g., Alarm ).
supportCode (string) --
The support code. Include this code in your email to support when you have questions about your Lightsail alarm. This code enables our support team to look up your Lightsail information more easily.
monitoredResourceInfo (dict) --
An object that lists information about the resource monitored by the alarm.
arn (string) --
The Amazon Resource Name (ARN) of the resource being monitored.
name (string) --
The name of the Lightsail resource being monitored.
resourceType (string) --
The Lightsail resource type of the resource being monitored.
Instances, load balancers, and relational databases are the only Lightsail resources that can currently be monitored by alarms.
comparisonOperator (string) --
The arithmetic operation used when comparing the specified statistic and threshold.
evaluationPeriods (integer) --
The number of periods over which data is compared to the specified threshold.
period (integer) --
The period, in seconds, over which the statistic is applied.
threshold (float) --
The value against which the specified statistic is compared.
datapointsToAlarm (integer) --
The number of data points that must not within the specified threshold to trigger the alarm.
treatMissingData (string) --
Specifies how the alarm handles missing data points.
An alarm can treat missing data in the following ways:
breaching - Assume the missing data is not within the threshold. Missing data counts towards the number of times the metric is not within the threshold.
notBreaching - Assume the missing data is within the threshold. Missing data does not count towards the number of times the metric is not within the threshold.
ignore - Ignore the missing data. Maintains the current alarm state.
missing - Missing data is treated as missing.
statistic (string) --
The statistic for the metric associated with the alarm.
The following statistics are available:
Minimum - The lowest value observed during the specified period. Use this value to determine low volumes of activity for your application.
Maximum - The highest value observed during the specified period. Use this value to determine high volumes of activity for your application.
Sum - All values submitted for the matching metric added together. You can use this statistic to determine the total volume of a metric.
Average - The value of Sum / SampleCount during the specified period. By comparing this statistic with the Minimum and Maximum values, you can determine the full scope of a metric and how close the average use is to the Minimum and Maximum values. This comparison helps you to know when to increase or decrease your resources.
SampleCount - The count, or number, of data points used for the statistical calculation.
metricName (string) --
The name of the metric associated with the alarm.
state (string) --
The current state of the alarm.
An alarm has the following possible states:
ALARM - The metric is outside of the defined threshold.
INSUFFICIENT_DATA - The alarm has just started, the metric is not available, or not enough data is available for the metric to determine the alarm state.
OK - The metric is within the defined threshold.
unit (string) --
The unit of the metric associated with the alarm.
contactProtocols (list) --
The contact protocols for the alarm, such as Email , SMS (text messaging), or both.
(string) --
notificationTriggers (list) --
The alarm states that trigger a notification.
(string) --
notificationEnabled (boolean) --
Indicates whether the alarm is enabled.
nextPageToken (string) --
The token to advance to the next page of resutls from your request.
A next page token is not returned if there are no more results to display.
To get the next page of results, perform another GetAlarms request and specify the next page token using the pageToken parameter.
{'metricName': {'BurstCapacityTime', 'BurstCapacityPercentage'}}
Returns the data points for the specified Amazon Lightsail instance metric, given an instance name.
Metrics report the utilization of your resources, and the error counts generated by them. Monitor and collect metric data regularly to maintain the reliability, availability, and performance of your resources.
See also: AWS API Documentation
Request Syntax
client.get_instance_metric_data(
instanceName='string',
metricName='CPUUtilization'|'NetworkIn'|'NetworkOut'|'StatusCheckFailed'|'StatusCheckFailed_Instance'|'StatusCheckFailed_System'|'BurstCapacityTime'|'BurstCapacityPercentage',
period=123,
startTime=datetime(2015, 1, 1),
endTime=datetime(2015, 1, 1),
unit='Seconds'|'Microseconds'|'Milliseconds'|'Bytes'|'Kilobytes'|'Megabytes'|'Gigabytes'|'Terabytes'|'Bits'|'Kilobits'|'Megabits'|'Gigabits'|'Terabits'|'Percent'|'Count'|'Bytes/Second'|'Kilobytes/Second'|'Megabytes/Second'|'Gigabytes/Second'|'Terabytes/Second'|'Bits/Second'|'Kilobits/Second'|'Megabits/Second'|'Gigabits/Second'|'Terabits/Second'|'Count/Second'|'None',
statistics=[
'Minimum'|'Maximum'|'Sum'|'Average'|'SampleCount',
]
)
string
[REQUIRED]
The name of the instance for which you want to get metrics data.
string
[REQUIRED]
The metric for which you want to return information.
Valid instance metric names are listed below, along with the most useful statistics to include in your request, and the published unit value.
**BurstCapacityPercentage ** - The percentage of CPU performance available for your instance to burst above its baseline. Your instance continously accrues and consumes burst capacity. Burst capacity stops accruing when your instance's BurstCapacityPercentage reaches 100%. For more information, see Viewing instance burst capacity in Amazon Lightsail . Statistics : The most useful statistics are Maximum and Average . Unit : The published unit is Percent .
**BurstCapacityTime ** - The available amount of time for your instance to burst at 100% CPU utilization. Your instance continously accrues and consumes burst capacity. Burst capacity time stops accruing when your instance's BurstCapacityPercentage metric reaches 100%. Burst capacity time is consumed at the full rate only when your instance operates at 100% CPU utilization. For example, if your instance operates at 50% CPU utilization in the burstable zone for a 5-minute period, then it consumes CPU burst capacity minutes at a 50% rate in that period. Your instance consumed 2 minutes and 30 seconds of CPU burst capacity minutes in the 5-minute period. For more information, see Viewing instance burst capacity in Amazon Lightsail . Statistics : The most useful statistics are Maximum and Average . Unit : The published unit is Seconds .
**CPUUtilization ** - The percentage of allocated compute units that are currently in use on the instance. This metric identifies the processing power to run the applications on the instance. Tools in your operating system can show a lower percentage than Lightsail when the instance is not allocated a full processor core. Statistics : The most useful statistics are Maximum and Average . Unit : The published unit is Percent .
**NetworkIn ** - The number of bytes received on all network interfaces by the instance. This metric identifies the volume of incoming network traffic to the instance. The number reported is the number of bytes received during the period. Because this metric is reported in 5-minute intervals, divide the reported number by 300 to find Bytes/second. Statistics : The most useful statistic is Sum . Unit : The published unit is Bytes .
**NetworkOut ** - The number of bytes sent out on all network interfaces by the instance. This metric identifies the volume of outgoing network traffic from the instance. The number reported is the number of bytes sent during the period. Because this metric is reported in 5-minute intervals, divide the reported number by 300 to find Bytes/second. Statistics : The most useful statistic is Sum . Unit : The published unit is Bytes .
**StatusCheckFailed ** - Reports whether the instance passed or failed both the instance status check and the system status check. This metric can be either 0 (passed) or 1 (failed). This metric data is available in 1-minute (60 seconds) granularity. Statistics : The most useful statistic is Sum . Unit : The published unit is Count .
**StatusCheckFailed_Instance ** - Reports whether the instance passed or failed the instance status check. This metric can be either 0 (passed) or 1 (failed). This metric data is available in 1-minute (60 seconds) granularity. Statistics : The most useful statistic is Sum . Unit : The published unit is Count .
**StatusCheckFailed_System ** - Reports whether the instance passed or failed the system status check. This metric can be either 0 (passed) or 1 (failed). This metric data is available in 1-minute (60 seconds) granularity. Statistics : The most useful statistic is Sum . Unit : The published unit is Count .
integer
[REQUIRED]
The granularity, in seconds, of the returned data points.
The StatusCheckFailed , StatusCheckFailed_Instance , and StatusCheckFailed_System instance metric data is available in 1-minute (60 seconds) granularity. All other instance metric data is available in 5-minute (300 seconds) granularity.
datetime
[REQUIRED]
The start time of the time period.
datetime
[REQUIRED]
The end time of the time period.
string
[REQUIRED]
The unit for the metric data request. Valid units depend on the metric data being requested. For the valid units to specify with each available metric, see the metricName parameter.
list
[REQUIRED]
The statistic for the metric.
The following statistics are available:
Minimum - The lowest value observed during the specified period. Use this value to determine low volumes of activity for your application.
Maximum - The highest value observed during the specified period. Use this value to determine high volumes of activity for your application.
Sum - All values submitted for the matching metric added together. You can use this statistic to determine the total volume of a metric.
Average - The value of Sum / SampleCount during the specified period. By comparing this statistic with the Minimum and Maximum values, you can determine the full scope of a metric and how close the average use is to the Minimum and Maximum values. This comparison helps you to know when to increase or decrease your resources.
SampleCount - The count, or number, of data points used for the statistical calculation.
(string) --
dict
Response Syntax
{
'metricName': 'CPUUtilization'|'NetworkIn'|'NetworkOut'|'StatusCheckFailed'|'StatusCheckFailed_Instance'|'StatusCheckFailed_System'|'BurstCapacityTime'|'BurstCapacityPercentage',
'metricData': [
{
'average': 123.0,
'maximum': 123.0,
'minimum': 123.0,
'sampleCount': 123.0,
'sum': 123.0,
'timestamp': datetime(2015, 1, 1),
'unit': 'Seconds'|'Microseconds'|'Milliseconds'|'Bytes'|'Kilobytes'|'Megabytes'|'Gigabytes'|'Terabytes'|'Bits'|'Kilobits'|'Megabits'|'Gigabits'|'Terabits'|'Percent'|'Count'|'Bytes/Second'|'Kilobytes/Second'|'Megabytes/Second'|'Gigabytes/Second'|'Terabytes/Second'|'Bits/Second'|'Kilobits/Second'|'Megabits/Second'|'Gigabits/Second'|'Terabits/Second'|'Count/Second'|'None'
},
]
}
Response Structure
(dict) --
metricName (string) --
The name of the metric returned.
metricData (list) --
An array of objects that describe the metric data returned.
(dict) --
Describes the metric data point.
average (float) --
The average.
maximum (float) --
The maximum.
minimum (float) --
The minimum.
sampleCount (float) --
The sample count.
sum (float) --
The sum.
timestamp (datetime) --
The timestamp (e.g., 1479816991.349 ).
unit (string) --
The unit.
{'metricName': {'BurstCapacityTime', 'BurstCapacityPercentage'}}
Creates or updates an alarm, and associates it with the specified metric.
An alarm is used to monitor a single metric for one of your resources. When a metric condition is met, the alarm can notify you by email, SMS text message, and a banner displayed on the Amazon Lightsail console. For more information, see Alarms in Amazon Lightsail .
When this action creates an alarm, the alarm state is immediately set to INSUFFICIENT_DATA . The alarm is then evaluated and its state is set appropriately. Any actions associated with the new state are then executed.
When you update an existing alarm, its state is left unchanged, but the update completely overwrites the previous configuration of the alarm. The alarm is then evaluated with the updated configuration.
See also: AWS API Documentation
Request Syntax
client.put_alarm(
alarmName='string',
metricName='CPUUtilization'|'NetworkIn'|'NetworkOut'|'StatusCheckFailed'|'StatusCheckFailed_Instance'|'StatusCheckFailed_System'|'ClientTLSNegotiationErrorCount'|'HealthyHostCount'|'UnhealthyHostCount'|'HTTPCode_LB_4XX_Count'|'HTTPCode_LB_5XX_Count'|'HTTPCode_Instance_2XX_Count'|'HTTPCode_Instance_3XX_Count'|'HTTPCode_Instance_4XX_Count'|'HTTPCode_Instance_5XX_Count'|'InstanceResponseTime'|'RejectedConnectionCount'|'RequestCount'|'DatabaseConnections'|'DiskQueueDepth'|'FreeStorageSpace'|'NetworkReceiveThroughput'|'NetworkTransmitThroughput'|'BurstCapacityTime'|'BurstCapacityPercentage',
monitoredResourceName='string',
comparisonOperator='GreaterThanOrEqualToThreshold'|'GreaterThanThreshold'|'LessThanThreshold'|'LessThanOrEqualToThreshold',
threshold=123.0,
evaluationPeriods=123,
datapointsToAlarm=123,
treatMissingData='breaching'|'notBreaching'|'ignore'|'missing',
contactProtocols=[
'Email'|'SMS',
],
notificationTriggers=[
'OK'|'ALARM'|'INSUFFICIENT_DATA',
],
notificationEnabled=True|False
)
string
[REQUIRED]
The name for the alarm. Specify the name of an existing alarm to update, and overwrite the previous configuration of the alarm.
string
[REQUIRED]
The name of the metric to associate with the alarm.
You can configure up to two alarms per metric.
The following metrics are available for each resource type:
Instances : BurstCapacityPercentage , BurstCapacityTime , CPUUtilization , NetworkIn , NetworkOut , StatusCheckFailed , StatusCheckFailed_Instance , and StatusCheckFailed_System .
Load balancers : ClientTLSNegotiationErrorCount , HealthyHostCount , UnhealthyHostCount , HTTPCode_LB_4XX_Count , HTTPCode_LB_5XX_Count , HTTPCode_Instance_2XX_Count , HTTPCode_Instance_3XX_Count , HTTPCode_Instance_4XX_Count , HTTPCode_Instance_5XX_Count , InstanceResponseTime , RejectedConnectionCount , and RequestCount .
Relational databases : CPUUtilization , DatabaseConnections , DiskQueueDepth , FreeStorageSpace , NetworkReceiveThroughput , and NetworkTransmitThroughput .
For more information about these metrics, see Metrics available in Lightsail .
string
[REQUIRED]
The name of the Lightsail resource that will be monitored.
Instances, load balancers, and relational databases are the only Lightsail resources that can currently be monitored by alarms.
string
[REQUIRED]
The arithmetic operation to use when comparing the specified statistic to the threshold. The specified statistic value is used as the first operand.
float
[REQUIRED]
The value against which the specified statistic is compared.
integer
[REQUIRED]
The number of most recent periods over which data is compared to the specified threshold. If you are setting an "M out of N" alarm, this value (evaluationPeriods ) is the N.
If you are setting an alarm that requires that a number of consecutive data points be breaching to trigger the alarm, this value specifies the rolling period of time in which data points are evaluated.
Each evaluation period is five minutes long. For example, specify an evaluation period of 24 to evaluate a metric over a rolling period of two hours.
You can specify a minimum valuation period of 1 (5 minutes), and a maximum evaluation period of 288 (24 hours).
integer
The number of data points that must be not within the specified threshold to trigger the alarm. If you are setting an "M out of N" alarm, this value (datapointsToAlarm ) is the M.
string
Sets how this alarm will handle missing data points.
An alarm can treat missing data in the following ways:
breaching - Assume the missing data is not within the threshold. Missing data counts towards the number of times the metric is not within the threshold.
notBreaching - Assume the missing data is within the threshold. Missing data does not count towards the number of times the metric is not within the threshold.
ignore - Ignore the missing data. Maintains the current alarm state.
missing - Missing data is treated as missing.
If treatMissingData is not specified, the default behavior of missing is used.
list
The contact protocols to use for the alarm, such as Email , SMS (text messaging), or both.
A notification is sent via the specified contact protocol if notifications are enabled for the alarm, and when the alarm is triggered.
A notification is not sent if a contact protocol is not specified, if the specified contact protocol is not configured in the AWS Region, or if notifications are not enabled for the alarm using the notificationEnabled paramater.
Use the CreateContactMethod action to configure a contact protocol in an AWS Region.
(string) --
list
The alarm states that trigger a notification.
An alarm has the following possible states:
ALARM - The metric is outside of the defined threshold.
INSUFFICIENT_DATA - The alarm has just started, the metric is not available, or not enough data is available for the metric to determine the alarm state.
OK - The metric is within the defined threshold.
When you specify a notification trigger, the ALARM state must be specified. The INSUFFICIENT_DATA and OK states can be specified in addition to the ALARM state.
If you specify OK as an alarm trigger, a notification is sent when the alarm switches from an ALARM or INSUFFICIENT_DATA alarm state to an OK state. This can be thought of as an all clear alarm notification.
If you specify INSUFFICIENT_DATA as the alarm trigger, a notification is sent when the alarm switches from an OK or ALARM alarm state to an INSUFFICIENT_DATA state.
The notification trigger defaults to ALARM if you don't specify this parameter.
(string) --
boolean
Indicates whether the alarm is enabled.
Notifications are enabled by default if you don't specify this parameter.
dict
Response Syntax
{
'operations': [
{
'id': 'string',
'resourceName': 'string',
'resourceType': 'Instance'|'StaticIp'|'KeyPair'|'InstanceSnapshot'|'Domain'|'PeeredVpc'|'LoadBalancer'|'LoadBalancerTlsCertificate'|'Disk'|'DiskSnapshot'|'RelationalDatabase'|'RelationalDatabaseSnapshot'|'ExportSnapshotRecord'|'CloudFormationStackRecord'|'Alarm'|'ContactMethod',
'createdAt': datetime(2015, 1, 1),
'location': {
'availabilityZone': 'string',
'regionName': 'us-east-1'|'us-east-2'|'us-west-1'|'us-west-2'|'eu-west-1'|'eu-west-2'|'eu-west-3'|'eu-central-1'|'ca-central-1'|'ap-south-1'|'ap-southeast-1'|'ap-southeast-2'|'ap-northeast-1'|'ap-northeast-2'
},
'isTerminal': True|False,
'operationDetails': 'string',
'operationType': 'DeleteKnownHostKeys'|'DeleteInstance'|'CreateInstance'|'StopInstance'|'StartInstance'|'RebootInstance'|'OpenInstancePublicPorts'|'PutInstancePublicPorts'|'CloseInstancePublicPorts'|'AllocateStaticIp'|'ReleaseStaticIp'|'AttachStaticIp'|'DetachStaticIp'|'UpdateDomainEntry'|'DeleteDomainEntry'|'CreateDomain'|'DeleteDomain'|'CreateInstanceSnapshot'|'DeleteInstanceSnapshot'|'CreateInstancesFromSnapshot'|'CreateLoadBalancer'|'DeleteLoadBalancer'|'AttachInstancesToLoadBalancer'|'DetachInstancesFromLoadBalancer'|'UpdateLoadBalancerAttribute'|'CreateLoadBalancerTlsCertificate'|'DeleteLoadBalancerTlsCertificate'|'AttachLoadBalancerTlsCertificate'|'CreateDisk'|'DeleteDisk'|'AttachDisk'|'DetachDisk'|'CreateDiskSnapshot'|'DeleteDiskSnapshot'|'CreateDiskFromSnapshot'|'CreateRelationalDatabase'|'UpdateRelationalDatabase'|'DeleteRelationalDatabase'|'CreateRelationalDatabaseFromSnapshot'|'CreateRelationalDatabaseSnapshot'|'DeleteRelationalDatabaseSnapshot'|'UpdateRelationalDatabaseParameters'|'StartRelationalDatabase'|'RebootRelationalDatabase'|'StopRelationalDatabase'|'EnableAddOn'|'DisableAddOn'|'PutAlarm'|'GetAlarms'|'DeleteAlarm'|'TestAlarm'|'CreateContactMethod'|'GetContactMethods'|'SendContactMethodVerification'|'DeleteContactMethod',
'status': 'NotStarted'|'Started'|'Failed'|'Completed'|'Succeeded',
'statusChangedAt': datetime(2015, 1, 1),
'errorCode': 'string',
'errorDetails': 'string'
},
]
}
Response Structure
(dict) --
operations (list) --
An array of objects that describe the result of the action, such as the status of the request, the timestamp of the request, and the resources affected by the request.
(dict) --
Describes the API operation.
id (string) --
The ID of the operation.
resourceName (string) --
The resource name.
resourceType (string) --
The resource type.
createdAt (datetime) --
The timestamp when the operation was initialized (e.g., 1479816991.349 ).
location (dict) --
The AWS Region and Availability Zone.
availabilityZone (string) --
The Availability Zone. Follows the format us-east-2a (case-sensitive).
regionName (string) --
The AWS Region name.
isTerminal (boolean) --
A Boolean value indicating whether the operation is terminal.
operationDetails (string) --
Details about the operation (e.g., Debian-1GB-Ohio-1 ).
operationType (string) --
The type of operation.
status (string) --
The status of the operation.
statusChangedAt (datetime) --
The timestamp when the status was changed (e.g., 1479816991.349 ).
errorCode (string) --
The error code.
errorDetails (string) --
The error details.