2020/07/07 - Amazon Elastic File System - 2 new 5 updated api methods
Changes This release adds support for automatic backups of Amazon EFS file systems to further simplify backup management.
Updates the file system's backup policy. Use this action to start or stop automatic backups of the file system.
See also: AWS API Documentation
Request Syntax
client.put_backup_policy(
FileSystemId='string',
BackupPolicy={
'Status': 'ENABLED'|'ENABLING'|'DISABLED'|'DISABLING'
}
)
string
[REQUIRED]
Specifies which EFS file system to update the backup policy for.
dict
[REQUIRED]
The backup policy included in the PutBackupPolicy request.
Status (string) -- [REQUIRED]
Describes the status of the file system's backup policy.
``ENABLED`` - EFS is automatically backing up the file system.
``ENABLING`` - EFS is turning on automatic backups for the file system.
``DISABLED`` - automatic back ups are turned off for the file system.
``DISABLED`` - EFS is turning off automatic backups for the file system.
dict
Response Syntax
{
'BackupPolicy': {
'Status': 'ENABLED'|'ENABLING'|'DISABLED'|'DISABLING'
}
}
Response Structure
(dict) --
BackupPolicy (dict) --
Describes the file system's backup policy, indicating whether automatic backups are turned on or off..
Status (string) --
Describes the status of the file system's backup policy.
``ENABLED`` - EFS is automatically backing up the file system.
``ENABLING`` - EFS is turning on automatic backups for the file system.
``DISABLED`` - automatic back ups are turned off for the file system.
``DISABLED`` - EFS is turning off automatic backups for the file system.
Returns the backup policy for the specified EFS file system.
See also: AWS API Documentation
Request Syntax
client.describe_backup_policy(
FileSystemId='string'
)
string
[REQUIRED]
Specifies which EFS file system to retrieve the BackupPolicy for.
dict
Response Syntax
{
'BackupPolicy': {
'Status': 'ENABLED'|'ENABLING'|'DISABLED'|'DISABLING'
}
}
Response Structure
(dict) --
BackupPolicy (dict) --
Describes the file system's backup policy, indicating whether automatic backups are turned on or off..
Status (string) --
Describes the status of the file system's backup policy.
``ENABLED`` - EFS is automatically backing up the file system.
``ENABLING`` - EFS is turning on automatic backups for the file system.
``DISABLED`` - automatic back ups are turned off for the file system.
``DISABLED`` - EFS is turning off automatic backups for the file system.
{'FileSystemArn': 'string'}
Creates a new, empty file system. The operation requires a creation token in the request that Amazon EFS uses to ensure idempotent creation (calling the operation with same creation token has no effect). If a file system does not currently exist that is owned by the caller's AWS account with the specified creation token, this operation does the following:
Creates a new, empty file system. The file system will have an Amazon EFS assigned ID, and an initial lifecycle state creating .
Returns with the description of the created file system.
Otherwise, this operation returns a FileSystemAlreadyExists error with the ID of the existing file system.
Note
For basic use cases, you can use a randomly generated UUID for the creation token.
The idempotent operation allows you to retry a CreateFileSystem call without risk of creating an extra file system. This can happen when an initial call fails in a way that leaves it uncertain whether or not a file system was actually created. An example might be that a transport level timeout occurred or your connection was reset. As long as you use the same creation token, if the initial call had succeeded in creating a file system, the client can learn of its existence from the FileSystemAlreadyExists error.
Note
The CreateFileSystem call returns while the file system's lifecycle state is still creating . You can check the file system creation status by calling the DescribeFileSystems operation, which among other things returns the file system state.
This operation also takes an optional PerformanceMode parameter that you choose for your file system. We recommend generalPurpose performance mode for most file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created. For more information, see Amazon EFS: Performance Modes .
After the file system is fully created, Amazon EFS sets its lifecycle state to available , at which point you can create one or more mount targets for the file system in your VPC. For more information, see CreateMountTarget . You mount your Amazon EFS file system on an EC2 instances in your VPC by using the mount target. For more information, see Amazon EFS: How it Works .
This operation requires permissions for the elasticfilesystem:CreateFileSystem action.
See also: AWS API Documentation
Request Syntax
client.create_file_system(
CreationToken='string',
PerformanceMode='generalPurpose'|'maxIO',
Encrypted=True|False,
KmsKeyId='string',
ThroughputMode='bursting'|'provisioned',
ProvisionedThroughputInMibps=123.0,
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
string
[REQUIRED]
A string of up to 64 ASCII characters. Amazon EFS uses this to ensure idempotent creation.
This field is autopopulated if not provided.
string
The performance mode of the file system. We recommend generalPurpose performance mode for most file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created.
boolean
A Boolean value that, if true, creates an encrypted file system. When creating an encrypted file system, you have the option of specifying CreateFileSystemRequest$KmsKeyId for an existing AWS Key Management Service (AWS KMS) customer master key (CMK). If you don't specify a CMK, then the default CMK for Amazon EFS, /aws/elasticfilesystem , is used to protect the encrypted file system.
string
The ID of the AWS KMS CMK to be used to protect the encrypted file system. This parameter is only required if you want to use a nondefault CMK. If this parameter is not specified, the default CMK for Amazon EFS is used. This ID can be in one of the following formats:
Key ID - A unique identifier of the key, for example 1234abcd-12ab-34cd-56ef-1234567890ab .
ARN - An Amazon Resource Name (ARN) for the key, for example arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab .
Key alias - A previously created display name for a key, for example alias/projectKey1 .
Key alias ARN - An ARN for a key alias, for example arn:aws:kms:us-west-2:444455556666:alias/projectKey1 .
If KmsKeyId is specified, the CreateFileSystemRequest$Encrypted parameter must be set to true.
Warning
EFS accepts only symmetric CMKs. You cannot use asymmetric CMKs with EFS file systems.
string
The throughput mode for the file system to be created. There are two throughput modes to choose from for your file system: bursting and provisioned . If you set ThroughputMode to provisioned , you must also set a value for ProvisionedThroughPutInMibps . You can decrease your file system's throughput in Provisioned Throughput mode or change between the throughput modes as long as it’s been more than 24 hours since the last decrease or throughput mode change. For more, see Specifying Throughput with Provisioned Mode in the Amazon EFS User Guide.
float
The throughput, measured in MiB/s, that you want to provision for a file system that you're creating. Valid values are 1-1024. Required if ThroughputMode is set to provisioned . The upper limit for throughput is 1024 MiB/s. You can get this limit increased by contacting AWS Support. For more information, see Amazon EFS Limits That You Can Increase in the Amazon EFS User Guide.
list
A value that specifies to create one or more tags associated with the file system. Each tag is a user-defined key-value pair. Name your file system on creation by including a "Key":"Name","Value":"{value}" key-value pair.
(dict) --
A tag is a key-value pair. Allowed characters are letters, white space, and numbers that can be represented in UTF-8, and the following characters:+ - = . _ : /
Key (string) -- [REQUIRED]
The tag key (String). The key can't start with aws: .
Value (string) -- [REQUIRED]
The value of the tag key.
dict
Response Syntax
{
'OwnerId': 'string',
'CreationToken': 'string',
'FileSystemId': 'string',
'FileSystemArn': 'string',
'CreationTime': datetime(2015, 1, 1),
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'Name': 'string',
'NumberOfMountTargets': 123,
'SizeInBytes': {
'Value': 123,
'Timestamp': datetime(2015, 1, 1),
'ValueInIA': 123,
'ValueInStandard': 123
},
'PerformanceMode': 'generalPurpose'|'maxIO',
'Encrypted': True|False,
'KmsKeyId': 'string',
'ThroughputMode': 'bursting'|'provisioned',
'ProvisionedThroughputInMibps': 123.0,
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
Response Structure
(dict) --
A description of the file system.
OwnerId (string) --
The AWS account that created the file system. If the file system was created by an IAM user, the parent account to which the user belongs is the owner.
CreationToken (string) --
The opaque string specified in the request.
FileSystemId (string) --
The ID of the file system, assigned by Amazon EFS.
FileSystemArn (string) --
The Amazon Resource Name (ARN) for the EFS file system, in the format arn:aws:elasticfilesystem:*region* :*account-id* :file-system/*file-system-id* `` . Example with sample data: ``arn:aws:elasticfilesystem:us-west-2:1111333322228888:file-system/fs-01234567
CreationTime (datetime) --
The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z).
LifeCycleState (string) --
The lifecycle phase of the file system.
Name (string) --
You can add tags to a file system, including a Name tag. For more information, see CreateFileSystem . If the file system has a Name tag, Amazon EFS returns the value in this field.
NumberOfMountTargets (integer) --
The current number of mount targets that the file system has. For more information, see CreateMountTarget .
SizeInBytes (dict) --
The latest known metered size (in bytes) of data stored in the file system, in its Value field, and the time at which that size was determined in its Timestamp field. The Timestamp value is the integer number of seconds since 1970-01-01T00:00:00Z. The SizeInBytes value doesn't represent the size of a consistent snapshot of the file system, but it is eventually consistent when there are no writes to the file system. That is, SizeInBytes represents actual size only if the file system is not modified for a period longer than a couple of hours. Otherwise, the value is not the exact size that the file system was at any point in time.
Value (integer) --
The latest known metered size (in bytes) of data stored in the file system.
Timestamp (datetime) --
The time at which the size of data, returned in the Value field, was determined. The value is the integer number of seconds since 1970-01-01T00:00:00Z.
ValueInIA (integer) --
The latest known metered size (in bytes) of data stored in the Infrequent Access storage class.
ValueInStandard (integer) --
The latest known metered size (in bytes) of data stored in the Standard storage class.
PerformanceMode (string) --
The performance mode of the file system.
Encrypted (boolean) --
A Boolean value that, if true, indicates that the file system is encrypted.
KmsKeyId (string) --
The ID of an AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the encrypted file system.
ThroughputMode (string) --
The throughput mode for a file system. There are two throughput modes to choose from for your file system: bursting and provisioned . If you set ThroughputMode to provisioned , you must also set a value for ProvisionedThroughPutInMibps . You can decrease your file system's throughput in Provisioned Throughput mode or change between the throughput modes as long as it’s been more than 24 hours since the last decrease or throughput mode change.
ProvisionedThroughputInMibps (float) --
The throughput, measured in MiB/s, that you want to provision for a file system. Valid values are 1-1024. Required if ThroughputMode is set to provisioned . The limit on throughput is 1024 MiB/s. You can get these limits increased by contacting AWS Support. For more information, see Amazon EFS Limits That You Can Increase in the Amazon EFS User Guide.
Tags (list) --
The tags associated with the file system, presented as an array of Tag objects.
(dict) --
A tag is a key-value pair. Allowed characters are letters, white space, and numbers that can be represented in UTF-8, and the following characters:+ - = . _ : /
Key (string) --
The tag key (String). The key can't start with aws: .
Value (string) --
The value of the tag key.
{'VpcId': 'string'}
Creates a mount target for a file system. You can then mount the file system on EC2 instances by using the mount target.
You can create one mount target in each Availability Zone in your VPC. All EC2 instances in a VPC within a given Availability Zone share a single mount target for a given file system. If you have multiple subnets in an Availability Zone, you create a mount target in one of the subnets. EC2 instances do not need to be in the same subnet as the mount target in order to access their file system. For more information, see Amazon EFS: How it Works .
In the request, you also specify a file system ID for which you are creating the mount target and the file system's lifecycle state must be available . For more information, see DescribeFileSystems .
In the request, you also provide a subnet ID, which determines the following:
VPC in which Amazon EFS creates the mount target
Availability Zone in which Amazon EFS creates the mount target
IP address range from which Amazon EFS selects the IP address of the mount target (if you don't specify an IP address in the request)
After creating the mount target, Amazon EFS returns a response that includes, a MountTargetId and an IpAddress . You use this IP address when mounting the file system in an EC2 instance. You can also use the mount target's DNS name when mounting the file system. The EC2 instance on which you mount the file system by using the mount target can resolve the mount target's DNS name to its IP address. For more information, see How it Works: Implementation Overview .
Note that you can create mount targets for a file system in only one VPC, and there can be only one mount target per Availability Zone. That is, if the file system already has one or more mount targets created for it, the subnet specified in the request to add another mount target must meet the following requirements:
Must belong to the same VPC as the subnets of the existing mount targets
Must not be in the same Availability Zone as any of the subnets of the existing mount targets
If the request satisfies the requirements, Amazon EFS does the following:
Creates a new mount target in the specified subnet.
Also creates a new network interface in the subnet as follows:
If the request provides an IpAddress , Amazon EFS assigns that IP address to the network interface. Otherwise, Amazon EFS assigns a free address in the subnet (in the same way that the Amazon EC2 CreateNetworkInterface call does when a request does not specify a primary private IP address).
If the request provides SecurityGroups , this network interface is associated with those security groups. Otherwise, it belongs to the default security group for the subnet's VPC.
Assigns the description Mount target *fsmt-id* for file system *fs-id* `` where `` *fsmt-id* `` is the mount target ID, and `` *fs-id* `` is the ``FileSystemId .
Sets the requesterManaged property of the network interface to true , and the requesterId value to EFS .
Each Amazon EFS mount target has one corresponding requester-managed EC2 network interface. After the network interface is created, Amazon EFS sets the NetworkInterfaceId field in the mount target's description to the network interface ID, and the IpAddress field to its address. If network interface creation fails, the entire CreateMountTarget operation fails.
Note
The CreateMountTarget call returns only after creating the network interface, but while the mount target state is still creating , you can check the mount target creation status by calling the DescribeMountTargets operation, which among other things returns the mount target state.
We recommend that you create a mount target in each of the Availability Zones. There are cost considerations for using a file system in an Availability Zone through a mount target created in another Availability Zone. For more information, see Amazon EFS . In addition, by always using a mount target local to the instance's Availability Zone, you eliminate a partial failure scenario. If the Availability Zone in which your mount target is created goes down, then you can't access your file system through that mount target.
This operation requires permissions for the following action on the file system:
elasticfilesystem:CreateMountTarget
This operation also requires permissions for the following Amazon EC2 actions:
ec2:DescribeSubnets
ec2:DescribeNetworkInterfaces
ec2:CreateNetworkInterface
See also: AWS API Documentation
Request Syntax
client.create_mount_target(
FileSystemId='string',
SubnetId='string',
IpAddress='string',
SecurityGroups=[
'string',
]
)
string
[REQUIRED]
The ID of the file system for which to create the mount target.
string
[REQUIRED]
The ID of the subnet to add the mount target in.
string
Valid IPv4 address within the address range of the specified subnet.
list
Up to five VPC security group IDs, of the form sg-xxxxxxxx . These must be for the same VPC as subnet specified.
(string) --
dict
Response Syntax
{
'OwnerId': 'string',
'MountTargetId': 'string',
'FileSystemId': 'string',
'SubnetId': 'string',
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'IpAddress': 'string',
'NetworkInterfaceId': 'string',
'AvailabilityZoneId': 'string',
'AvailabilityZoneName': 'string',
'VpcId': 'string'
}
Response Structure
(dict) --
Provides a description of a mount target.
OwnerId (string) --
AWS account ID that owns the resource.
MountTargetId (string) --
System-assigned mount target ID.
FileSystemId (string) --
The ID of the file system for which the mount target is intended.
SubnetId (string) --
The ID of the mount target's subnet.
LifeCycleState (string) --
Lifecycle state of the mount target.
IpAddress (string) --
Address at which the file system can be mounted by using the mount target.
NetworkInterfaceId (string) --
The ID of the network interface that Amazon EFS created when it created the mount target.
AvailabilityZoneId (string) --
The unique and consistent identifier of the Availability Zone (AZ) that the mount target resides in. For example, use1-az1 is an AZ ID for the us-east-1 Region and it has the same location in every AWS account.
AvailabilityZoneName (string) --
The name of the Availability Zone (AZ) that the mount target resides in. AZs are independently mapped to names for each AWS account. For example, the Availability Zone us-east-1a for your AWS account might not be the same location as us-east-1a for another AWS account.
VpcId (string) --
The Virtual Private Cloud (VPC) ID that the mount target is configured in.
{'FileSystems': {'FileSystemArn': 'string'}}
Returns the description of a specific Amazon EFS file system if either the file system CreationToken or the FileSystemId is provided. Otherwise, it returns descriptions of all file systems owned by the caller's AWS account in the AWS Region of the endpoint that you're calling.
When retrieving all file system descriptions, you can optionally specify the MaxItems parameter to limit the number of descriptions in a response. Currently, this number is automatically set to 10. If more file system descriptions remain, Amazon EFS returns a NextMarker , an opaque token, in the response. In this case, you should send a subsequent request with the Marker request parameter set to the value of NextMarker .
To retrieve a list of your file system descriptions, this operation is used in an iterative process, where DescribeFileSystems is called first without the Marker and then the operation continues to call it with the Marker parameter set to the value of the NextMarker from the previous response until the response has no NextMarker .
The order of file systems returned in the response of one DescribeFileSystems call and the order of file systems returned across the responses of a multi-call iteration is unspecified.
This operation requires permissions for the elasticfilesystem:DescribeFileSystems action.
See also: AWS API Documentation
Request Syntax
client.describe_file_systems(
MaxItems=123,
Marker='string',
CreationToken='string',
FileSystemId='string'
)
integer
(Optional) Specifies the maximum number of file systems to return in the response (integer). This number is automatically set to 100. The response is paginated at 100 per page if you have more than 100 file systems.
string
(Optional) Opaque pagination token returned from a previous DescribeFileSystems operation (String). If present, specifies to continue the list from where the returning call had left off.
string
(Optional) Restricts the list to the file system with this creation token (String). You specify a creation token when you create an Amazon EFS file system.
string
(Optional) ID of the file system whose description you want to retrieve (String).
dict
Response Syntax
{
'Marker': 'string',
'FileSystems': [
{
'OwnerId': 'string',
'CreationToken': 'string',
'FileSystemId': 'string',
'FileSystemArn': 'string',
'CreationTime': datetime(2015, 1, 1),
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'Name': 'string',
'NumberOfMountTargets': 123,
'SizeInBytes': {
'Value': 123,
'Timestamp': datetime(2015, 1, 1),
'ValueInIA': 123,
'ValueInStandard': 123
},
'PerformanceMode': 'generalPurpose'|'maxIO',
'Encrypted': True|False,
'KmsKeyId': 'string',
'ThroughputMode': 'bursting'|'provisioned',
'ProvisionedThroughputInMibps': 123.0,
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'NextMarker': 'string'
}
Response Structure
(dict) --
Marker (string) --
Present if provided by caller in the request (String).
FileSystems (list) --
An array of file system descriptions.
(dict) --
A description of the file system.
OwnerId (string) --
The AWS account that created the file system. If the file system was created by an IAM user, the parent account to which the user belongs is the owner.
CreationToken (string) --
The opaque string specified in the request.
FileSystemId (string) --
The ID of the file system, assigned by Amazon EFS.
FileSystemArn (string) --
The Amazon Resource Name (ARN) for the EFS file system, in the format arn:aws:elasticfilesystem:*region* :*account-id* :file-system/*file-system-id* `` . Example with sample data: ``arn:aws:elasticfilesystem:us-west-2:1111333322228888:file-system/fs-01234567
CreationTime (datetime) --
The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z).
LifeCycleState (string) --
The lifecycle phase of the file system.
Name (string) --
You can add tags to a file system, including a Name tag. For more information, see CreateFileSystem . If the file system has a Name tag, Amazon EFS returns the value in this field.
NumberOfMountTargets (integer) --
The current number of mount targets that the file system has. For more information, see CreateMountTarget .
SizeInBytes (dict) --
The latest known metered size (in bytes) of data stored in the file system, in its Value field, and the time at which that size was determined in its Timestamp field. The Timestamp value is the integer number of seconds since 1970-01-01T00:00:00Z. The SizeInBytes value doesn't represent the size of a consistent snapshot of the file system, but it is eventually consistent when there are no writes to the file system. That is, SizeInBytes represents actual size only if the file system is not modified for a period longer than a couple of hours. Otherwise, the value is not the exact size that the file system was at any point in time.
Value (integer) --
The latest known metered size (in bytes) of data stored in the file system.
Timestamp (datetime) --
The time at which the size of data, returned in the Value field, was determined. The value is the integer number of seconds since 1970-01-01T00:00:00Z.
ValueInIA (integer) --
The latest known metered size (in bytes) of data stored in the Infrequent Access storage class.
ValueInStandard (integer) --
The latest known metered size (in bytes) of data stored in the Standard storage class.
PerformanceMode (string) --
The performance mode of the file system.
Encrypted (boolean) --
A Boolean value that, if true, indicates that the file system is encrypted.
KmsKeyId (string) --
The ID of an AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the encrypted file system.
ThroughputMode (string) --
The throughput mode for a file system. There are two throughput modes to choose from for your file system: bursting and provisioned . If you set ThroughputMode to provisioned , you must also set a value for ProvisionedThroughPutInMibps . You can decrease your file system's throughput in Provisioned Throughput mode or change between the throughput modes as long as it’s been more than 24 hours since the last decrease or throughput mode change.
ProvisionedThroughputInMibps (float) --
The throughput, measured in MiB/s, that you want to provision for a file system. Valid values are 1-1024. Required if ThroughputMode is set to provisioned . The limit on throughput is 1024 MiB/s. You can get these limits increased by contacting AWS Support. For more information, see Amazon EFS Limits That You Can Increase in the Amazon EFS User Guide.
Tags (list) --
The tags associated with the file system, presented as an array of Tag objects.
(dict) --
A tag is a key-value pair. Allowed characters are letters, white space, and numbers that can be represented in UTF-8, and the following characters:+ - = . _ : /
Key (string) --
The tag key (String). The key can't start with aws: .
Value (string) --
The value of the tag key.
NextMarker (string) --
Present if there are more file systems than returned in the response (String). You can use the NextMarker in the subsequent request to fetch the descriptions.
{'MountTargets': {'VpcId': 'string'}}
Returns the descriptions of all the current mount targets, or a specific mount target, for a file system. When requesting all of the current mount targets, the order of mount targets returned in the response is unspecified.
This operation requires permissions for the elasticfilesystem:DescribeMountTargets action, on either the file system ID that you specify in FileSystemId , or on the file system of the mount target that you specify in MountTargetId .
See also: AWS API Documentation
Request Syntax
client.describe_mount_targets(
MaxItems=123,
Marker='string',
FileSystemId='string',
MountTargetId='string',
AccessPointId='string'
)
integer
(Optional) Maximum number of mount targets to return in the response. Currently, this number is automatically set to 10, and other values are ignored. The response is paginated at 100 per page if you have more than 100 mount targets.
string
(Optional) Opaque pagination token returned from a previous DescribeMountTargets operation (String). If present, it specifies to continue the list from where the previous returning call left off.
string
(Optional) ID of the file system whose mount targets you want to list (String). It must be included in your request if an AccessPointId or MountTargetId is not included. Accepts either a file system ID or ARN as input.
string
(Optional) ID of the mount target that you want to have described (String). It must be included in your request if FileSystemId is not included. Accepts either a mount target ID or ARN as input.
string
(Optional) The ID of the access point whose mount targets that you want to list. It must be included in your request if a FileSystemId or MountTargetId is not included in your request. Accepts either an access point ID or ARN as input.
dict
Response Syntax
{
'Marker': 'string',
'MountTargets': [
{
'OwnerId': 'string',
'MountTargetId': 'string',
'FileSystemId': 'string',
'SubnetId': 'string',
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'IpAddress': 'string',
'NetworkInterfaceId': 'string',
'AvailabilityZoneId': 'string',
'AvailabilityZoneName': 'string',
'VpcId': 'string'
},
],
'NextMarker': 'string'
}
Response Structure
(dict) --
Marker (string) --
If the request included the Marker , the response returns that value in this field.
MountTargets (list) --
Returns the file system's mount targets as an array of MountTargetDescription objects.
(dict) --
Provides a description of a mount target.
OwnerId (string) --
AWS account ID that owns the resource.
MountTargetId (string) --
System-assigned mount target ID.
FileSystemId (string) --
The ID of the file system for which the mount target is intended.
SubnetId (string) --
The ID of the mount target's subnet.
LifeCycleState (string) --
Lifecycle state of the mount target.
IpAddress (string) --
Address at which the file system can be mounted by using the mount target.
NetworkInterfaceId (string) --
The ID of the network interface that Amazon EFS created when it created the mount target.
AvailabilityZoneId (string) --
The unique and consistent identifier of the Availability Zone (AZ) that the mount target resides in. For example, use1-az1 is an AZ ID for the us-east-1 Region and it has the same location in every AWS account.
AvailabilityZoneName (string) --
The name of the Availability Zone (AZ) that the mount target resides in. AZs are independently mapped to names for each AWS account. For example, the Availability Zone us-east-1a for your AWS account might not be the same location as us-east-1a for another AWS account.
VpcId (string) --
The Virtual Private Cloud (VPC) ID that the mount target is configured in.
NextMarker (string) --
If a value is present, there are more mount targets to return. In a subsequent request, you can provide Marker in your request with this value to retrieve the next set of mount targets.
{'FileSystemArn': 'string'}
Updates the throughput mode or the amount of provisioned throughput of an existing file system.
See also: AWS API Documentation
Request Syntax
client.update_file_system(
FileSystemId='string',
ThroughputMode='bursting'|'provisioned',
ProvisionedThroughputInMibps=123.0
)
string
[REQUIRED]
The ID of the file system that you want to update.
string
(Optional) The throughput mode that you want your file system to use. If you're not updating your throughput mode, you don't need to provide this value in your request. If you are changing the ThroughputMode to provisioned , you must also set a value for ProvisionedThroughputInMibps .
float
(Optional) The amount of throughput, in MiB/s, that you want to provision for your file system. Valid values are 1-1024. Required if ThroughputMode is changed to provisioned on update. If you're not updating the amount of provisioned throughput for your file system, you don't need to provide this value in your request.
dict
Response Syntax
{
'OwnerId': 'string',
'CreationToken': 'string',
'FileSystemId': 'string',
'FileSystemArn': 'string',
'CreationTime': datetime(2015, 1, 1),
'LifeCycleState': 'creating'|'available'|'updating'|'deleting'|'deleted',
'Name': 'string',
'NumberOfMountTargets': 123,
'SizeInBytes': {
'Value': 123,
'Timestamp': datetime(2015, 1, 1),
'ValueInIA': 123,
'ValueInStandard': 123
},
'PerformanceMode': 'generalPurpose'|'maxIO',
'Encrypted': True|False,
'KmsKeyId': 'string',
'ThroughputMode': 'bursting'|'provisioned',
'ProvisionedThroughputInMibps': 123.0,
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
Response Structure
(dict) --
A description of the file system.
OwnerId (string) --
The AWS account that created the file system. If the file system was created by an IAM user, the parent account to which the user belongs is the owner.
CreationToken (string) --
The opaque string specified in the request.
FileSystemId (string) --
The ID of the file system, assigned by Amazon EFS.
FileSystemArn (string) --
The Amazon Resource Name (ARN) for the EFS file system, in the format arn:aws:elasticfilesystem:*region* :*account-id* :file-system/*file-system-id* `` . Example with sample data: ``arn:aws:elasticfilesystem:us-west-2:1111333322228888:file-system/fs-01234567
CreationTime (datetime) --
The time that the file system was created, in seconds (since 1970-01-01T00:00:00Z).
LifeCycleState (string) --
The lifecycle phase of the file system.
Name (string) --
You can add tags to a file system, including a Name tag. For more information, see CreateFileSystem . If the file system has a Name tag, Amazon EFS returns the value in this field.
NumberOfMountTargets (integer) --
The current number of mount targets that the file system has. For more information, see CreateMountTarget .
SizeInBytes (dict) --
The latest known metered size (in bytes) of data stored in the file system, in its Value field, and the time at which that size was determined in its Timestamp field. The Timestamp value is the integer number of seconds since 1970-01-01T00:00:00Z. The SizeInBytes value doesn't represent the size of a consistent snapshot of the file system, but it is eventually consistent when there are no writes to the file system. That is, SizeInBytes represents actual size only if the file system is not modified for a period longer than a couple of hours. Otherwise, the value is not the exact size that the file system was at any point in time.
Value (integer) --
The latest known metered size (in bytes) of data stored in the file system.
Timestamp (datetime) --
The time at which the size of data, returned in the Value field, was determined. The value is the integer number of seconds since 1970-01-01T00:00:00Z.
ValueInIA (integer) --
The latest known metered size (in bytes) of data stored in the Infrequent Access storage class.
ValueInStandard (integer) --
The latest known metered size (in bytes) of data stored in the Standard storage class.
PerformanceMode (string) --
The performance mode of the file system.
Encrypted (boolean) --
A Boolean value that, if true, indicates that the file system is encrypted.
KmsKeyId (string) --
The ID of an AWS Key Management Service (AWS KMS) customer master key (CMK) that was used to protect the encrypted file system.
ThroughputMode (string) --
The throughput mode for a file system. There are two throughput modes to choose from for your file system: bursting and provisioned . If you set ThroughputMode to provisioned , you must also set a value for ProvisionedThroughPutInMibps . You can decrease your file system's throughput in Provisioned Throughput mode or change between the throughput modes as long as it’s been more than 24 hours since the last decrease or throughput mode change.
ProvisionedThroughputInMibps (float) --
The throughput, measured in MiB/s, that you want to provision for a file system. Valid values are 1-1024. Required if ThroughputMode is set to provisioned . The limit on throughput is 1024 MiB/s. You can get these limits increased by contacting AWS Support. For more information, see Amazon EFS Limits That You Can Increase in the Amazon EFS User Guide.
Tags (list) --
The tags associated with the file system, presented as an array of Tag objects.
(dict) --
A tag is a key-value pair. Allowed characters are letters, white space, and numbers that can be represented in UTF-8, and the following characters:+ - = . _ : /
Key (string) --
The tag key (String). The key can't start with aws: .
Value (string) --
The value of the tag key.