2020/11/23 - Amazon EC2 Container Service - 1 new 7 updated api methods
Changes This release adds support for updating capacity providers, specifying custom instance warmup periods for capacity providers, and using deployment circuit breaker for your ECS Services.
Modifies the parameters for a capacity provider.
See also: AWS API Documentation
Request Syntax
client.update_capacity_provider(
name='string',
autoScalingGroupProvider={
'managedScaling': {
'status': 'ENABLED'|'DISABLED',
'targetCapacity': 123,
'minimumScalingStepSize': 123,
'maximumScalingStepSize': 123,
'instanceWarmupPeriod': 123
},
'managedTerminationProtection': 'ENABLED'|'DISABLED'
}
)
string
[REQUIRED]
An object representing the parameters to update for the Auto Scaling group capacity provider.
dict
[REQUIRED]
The name of the capacity provider to update.
managedScaling (dict) --
The managed scaling settings for the Auto Scaling group capacity provider.
When managed scaling is enabled, Amazon ECS manages the scale-in and scale-out actions of the Auto Scaling group. Amazon ECS manages a target tracking scaling policy using an Amazon ECS-managed CloudWatch metric with the specified targetCapacity value as the target value for the metric. For more information, see Using Managed Scaling in the Amazon Elastic Container Service Developer Guide .
If managed scaling is disabled, the user must manage the scaling of the Auto Scaling group.
status (string) --
Whether or not to enable managed scaling for the capacity provider.
targetCapacity (integer) --
The target capacity value for the capacity provider. The specified value must be greater than 0 and less than or equal to 100 . A value of 100 will result in the Amazon EC2 instances in your Auto Scaling group being completely utilized.
minimumScalingStepSize (integer) --
The minimum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 1 is used.
maximumScalingStepSize (integer) --
The maximum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 10000 is used.
instanceWarmupPeriod (integer) --
The period of time, in seconds, after a newly launched Amazon EC2 instance can contribute to CloudWatch metrics for Auto Scaling group. If this parameter is omitted, the default value of 300 seconds is used.
managedTerminationProtection (string) --
The managed termination protection setting to use for the Auto Scaling group capacity provider. This determines whether the Auto Scaling group has managed termination protection.
Warning
When using managed termination protection, managed scaling must also be used otherwise managed termination protection will not work.
When managed termination protection is enabled, Amazon ECS prevents the Amazon EC2 instances in an Auto Scaling group that contain tasks from being terminated during a scale-in action. The Auto Scaling group and each instance in the Auto Scaling group must have instance protection from scale-in actions enabled as well. For more information, see Instance Protection in the AWS Auto Scaling User Guide .
When managed termination protection is disabled, your Amazon EC2 instances are not protected from termination when the Auto Scaling group scales in.
dict
Response Syntax
{
'capacityProvider': {
'capacityProviderArn': 'string',
'name': 'string',
'status': 'ACTIVE'|'INACTIVE',
'autoScalingGroupProvider': {
'autoScalingGroupArn': 'string',
'managedScaling': {
'status': 'ENABLED'|'DISABLED',
'targetCapacity': 123,
'minimumScalingStepSize': 123,
'maximumScalingStepSize': 123,
'instanceWarmupPeriod': 123
},
'managedTerminationProtection': 'ENABLED'|'DISABLED'
},
'updateStatus': 'DELETE_IN_PROGRESS'|'DELETE_COMPLETE'|'DELETE_FAILED'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_FAILED',
'updateStatusReason': 'string',
'tags': [
{
'key': 'string',
'value': 'string'
},
]
}
}
Response Structure
(dict) --
capacityProvider (dict) --
The details of a capacity provider.
capacityProviderArn (string) --
The Amazon Resource Name (ARN) that identifies the capacity provider.
name (string) --
The name of the capacity provider.
status (string) --
The current status of the capacity provider. Only capacity providers in an ACTIVE state can be used in a cluster. When a capacity provider is successfully deleted, it will have an INACTIVE status.
autoScalingGroupProvider (dict) --
The Auto Scaling group settings for the capacity provider.
autoScalingGroupArn (string) --
The Amazon Resource Name (ARN) that identifies the Auto Scaling group.
managedScaling (dict) --
The managed scaling settings for the Auto Scaling group capacity provider.
status (string) --
Whether or not to enable managed scaling for the capacity provider.
targetCapacity (integer) --
The target capacity value for the capacity provider. The specified value must be greater than 0 and less than or equal to 100 . A value of 100 will result in the Amazon EC2 instances in your Auto Scaling group being completely utilized.
minimumScalingStepSize (integer) --
The minimum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 1 is used.
maximumScalingStepSize (integer) --
The maximum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 10000 is used.
instanceWarmupPeriod (integer) --
The period of time, in seconds, after a newly launched Amazon EC2 instance can contribute to CloudWatch metrics for Auto Scaling group. If this parameter is omitted, the default value of 300 seconds is used.
managedTerminationProtection (string) --
The managed termination protection setting to use for the Auto Scaling group capacity provider. This determines whether the Auto Scaling group has managed termination protection.
Warning
When using managed termination protection, managed scaling must also be used otherwise managed termination protection will not work.
When managed termination protection is enabled, Amazon ECS prevents the Amazon EC2 instances in an Auto Scaling group that contain tasks from being terminated during a scale-in action. The Auto Scaling group and each instance in the Auto Scaling group must have instance protection from scale-in actions enabled as well. For more information, see Instance Protection in the AWS Auto Scaling User Guide .
When managed termination protection is disabled, your Amazon EC2 instances are not protected from termination when the Auto Scaling group scales in.
updateStatus (string) --
The update status of the capacity provider. The following are the possible states that will be returned.
DELETE_IN_PROGRESS
The capacity provider is in the process of being deleted.
DELETE_COMPLETE
The capacity provider has been successfully deleted and will have an INACTIVE status.
DELETE_FAILED
The capacity provider was unable to be deleted. The update status reason will provide further details about why the delete failed.
updateStatusReason (string) --
The update status reason. This provides further details about the update status for the capacity provider.
tags (list) --
The metadata that you apply to the capacity provider to help you categorize and organize it. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
{'autoScalingGroupProvider': {'managedScaling': {'instanceWarmupPeriod': 'integer'}}}
Response {'capacityProvider': {'autoScalingGroupProvider': {'managedScaling': {'instanceWarmupPeriod': 'integer'}},
'updateStatus': {'UPDATE_COMPLETE',
'UPDATE_FAILED',
'UPDATE_IN_PROGRESS'}}}
Creates a new capacity provider. Capacity providers are associated with an Amazon ECS cluster and are used in capacity provider strategies to facilitate cluster auto scaling.
Only capacity providers using an Auto Scaling group can be created. Amazon ECS tasks on AWS Fargate use the FARGATE and FARGATE_SPOT capacity providers which are already created and available to all accounts in Regions supported by AWS Fargate.
See also: AWS API Documentation
Request Syntax
client.create_capacity_provider(
name='string',
autoScalingGroupProvider={
'autoScalingGroupArn': 'string',
'managedScaling': {
'status': 'ENABLED'|'DISABLED',
'targetCapacity': 123,
'minimumScalingStepSize': 123,
'maximumScalingStepSize': 123,
'instanceWarmupPeriod': 123
},
'managedTerminationProtection': 'ENABLED'|'DISABLED'
},
tags=[
{
'key': 'string',
'value': 'string'
},
]
)
string
[REQUIRED]
The name of the capacity provider. Up to 255 characters are allowed, including letters (upper and lowercase), numbers, underscores, and hyphens. The name cannot be prefixed with "aws ", "ecs ", or "fargate ".
dict
[REQUIRED]
The details of the Auto Scaling group for the capacity provider.
autoScalingGroupArn (string) -- [REQUIRED]
The Amazon Resource Name (ARN) that identifies the Auto Scaling group.
managedScaling (dict) --
The managed scaling settings for the Auto Scaling group capacity provider.
status (string) --
Whether or not to enable managed scaling for the capacity provider.
targetCapacity (integer) --
The target capacity value for the capacity provider. The specified value must be greater than 0 and less than or equal to 100 . A value of 100 will result in the Amazon EC2 instances in your Auto Scaling group being completely utilized.
minimumScalingStepSize (integer) --
The minimum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 1 is used.
maximumScalingStepSize (integer) --
The maximum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 10000 is used.
instanceWarmupPeriod (integer) --
The period of time, in seconds, after a newly launched Amazon EC2 instance can contribute to CloudWatch metrics for Auto Scaling group. If this parameter is omitted, the default value of 300 seconds is used.
managedTerminationProtection (string) --
The managed termination protection setting to use for the Auto Scaling group capacity provider. This determines whether the Auto Scaling group has managed termination protection.
Warning
When using managed termination protection, managed scaling must also be used otherwise managed termination protection will not work.
When managed termination protection is enabled, Amazon ECS prevents the Amazon EC2 instances in an Auto Scaling group that contain tasks from being terminated during a scale-in action. The Auto Scaling group and each instance in the Auto Scaling group must have instance protection from scale-in actions enabled as well. For more information, see Instance Protection in the AWS Auto Scaling User Guide .
When managed termination protection is disabled, your Amazon EC2 instances are not protected from termination when the Auto Scaling group scales in.
list
The metadata that you apply to the capacity provider to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
dict
Response Syntax
{
'capacityProvider': {
'capacityProviderArn': 'string',
'name': 'string',
'status': 'ACTIVE'|'INACTIVE',
'autoScalingGroupProvider': {
'autoScalingGroupArn': 'string',
'managedScaling': {
'status': 'ENABLED'|'DISABLED',
'targetCapacity': 123,
'minimumScalingStepSize': 123,
'maximumScalingStepSize': 123,
'instanceWarmupPeriod': 123
},
'managedTerminationProtection': 'ENABLED'|'DISABLED'
},
'updateStatus': 'DELETE_IN_PROGRESS'|'DELETE_COMPLETE'|'DELETE_FAILED'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_FAILED',
'updateStatusReason': 'string',
'tags': [
{
'key': 'string',
'value': 'string'
},
]
}
}
Response Structure
(dict) --
capacityProvider (dict) --
The full description of the new capacity provider.
capacityProviderArn (string) --
The Amazon Resource Name (ARN) that identifies the capacity provider.
name (string) --
The name of the capacity provider.
status (string) --
The current status of the capacity provider. Only capacity providers in an ACTIVE state can be used in a cluster. When a capacity provider is successfully deleted, it will have an INACTIVE status.
autoScalingGroupProvider (dict) --
The Auto Scaling group settings for the capacity provider.
autoScalingGroupArn (string) --
The Amazon Resource Name (ARN) that identifies the Auto Scaling group.
managedScaling (dict) --
The managed scaling settings for the Auto Scaling group capacity provider.
status (string) --
Whether or not to enable managed scaling for the capacity provider.
targetCapacity (integer) --
The target capacity value for the capacity provider. The specified value must be greater than 0 and less than or equal to 100 . A value of 100 will result in the Amazon EC2 instances in your Auto Scaling group being completely utilized.
minimumScalingStepSize (integer) --
The minimum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 1 is used.
maximumScalingStepSize (integer) --
The maximum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 10000 is used.
instanceWarmupPeriod (integer) --
The period of time, in seconds, after a newly launched Amazon EC2 instance can contribute to CloudWatch metrics for Auto Scaling group. If this parameter is omitted, the default value of 300 seconds is used.
managedTerminationProtection (string) --
The managed termination protection setting to use for the Auto Scaling group capacity provider. This determines whether the Auto Scaling group has managed termination protection.
Warning
When using managed termination protection, managed scaling must also be used otherwise managed termination protection will not work.
When managed termination protection is enabled, Amazon ECS prevents the Amazon EC2 instances in an Auto Scaling group that contain tasks from being terminated during a scale-in action. The Auto Scaling group and each instance in the Auto Scaling group must have instance protection from scale-in actions enabled as well. For more information, see Instance Protection in the AWS Auto Scaling User Guide .
When managed termination protection is disabled, your Amazon EC2 instances are not protected from termination when the Auto Scaling group scales in.
updateStatus (string) --
The update status of the capacity provider. The following are the possible states that will be returned.
DELETE_IN_PROGRESS
The capacity provider is in the process of being deleted.
DELETE_COMPLETE
The capacity provider has been successfully deleted and will have an INACTIVE status.
DELETE_FAILED
The capacity provider was unable to be deleted. The update status reason will provide further details about why the delete failed.
updateStatusReason (string) --
The update status reason. This provides further details about the update status for the capacity provider.
tags (list) --
The metadata that you apply to the capacity provider to help you categorize and organize it. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
{'deploymentConfiguration': {'deploymentCircuitBreaker': {'enable': 'boolean',
'rollback': 'boolean'}}}
Response {'service': {'deploymentConfiguration': {'deploymentCircuitBreaker': {'enable': 'boolean',
'rollback': 'boolean'}},
'deployments': {'failedTasks': 'integer',
'rolloutState': 'COMPLETED | FAILED | IN_PROGRESS',
'rolloutStateReason': 'string'}}}
Runs and maintains a desired number of tasks from a specified task definition. If the number of tasks running in a service drops below the desiredCount , Amazon ECS runs another copy of the task in the specified cluster. To update an existing service, see the UpdateService action.
In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind one or more load balancers. The load balancers distribute traffic across the tasks that are associated with the service. For more information, see Service Load Balancing in the Amazon Elastic Container Service Developer Guide .
Tasks for services that do not use a load balancer are considered healthy if they're in the RUNNING state. Tasks for services that do use a load balancer are considered healthy if they're in the RUNNING state and the container instance that they're hosted on is reported as healthy by the load balancer.
There are two service scheduler strategies available:
REPLICA - The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. For more information, see Service Scheduler Concepts in the Amazon Elastic Container Service Developer Guide .
DAEMON - The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that do not meet the placement constraints. When using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies. For more information, see Service Scheduler Concepts in the Amazon Elastic Container Service Developer Guide .
You can optionally specify a deployment configuration for your service. The deployment is triggered by changing properties, such as the task definition or the desired count of a service, with an UpdateService operation. The default value for a replica service for minimumHealthyPercent is 100%. The default value for a daemon service for minimumHealthyPercent is 0%.
If a service is using the ECS deployment controller, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler might stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they're in the RUNNING state. Tasks for services that do use a load balancer are considered healthy if they're in the RUNNING state and they're reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the ECS deployment controller, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using either the CODE_DEPLOY or EXTERNAL deployment controller types and tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are used only to define the lower and upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent and maximum percent values aren't used, although they're currently visible when describing your service.
When creating a service that uses the EXTERNAL deployment controller, you can specify only parameters that aren't controlled at the task set level. The only required parameter is the service name. You control your services using the CreateTaskSet operation. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide .
When the service scheduler launches new tasks, it determines task placement in your cluster using the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although you can choose a different placement strategy) with the placementStrategy parameter):
Sort the valid container instances, giving priority to instances that have the fewest number of running tasks for this service in their respective Availability Zone. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
See also: AWS API Documentation
Request Syntax
client.create_service(
cluster='string',
serviceName='string',
taskDefinition='string',
loadBalancers=[
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
serviceRegistries=[
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
desiredCount=123,
clientToken='string',
launchType='EC2'|'FARGATE',
capacityProviderStrategy=[
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
platformVersion='string',
role='string',
deploymentConfiguration={
'deploymentCircuitBreaker': {
'enable': True|False,
'rollback': True|False
},
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
placementConstraints=[
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
placementStrategy=[
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
networkConfiguration={
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
healthCheckGracePeriodSeconds=123,
schedulingStrategy='REPLICA'|'DAEMON',
deploymentController={
'type': 'ECS'|'CODE_DEPLOY'|'EXTERNAL'
},
tags=[
{
'key': 'string',
'value': 'string'
},
],
enableECSManagedTags=True|False,
propagateTags='TASK_DEFINITION'|'SERVICE'
)
string
The short name or full Amazon Resource Name (ARN) of the cluster on which to run your service. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
string
The family and revision (family:revision ) or full ARN of the task definition to run in your service. If a revision is not specified, the latest ACTIVE revision is used.
A task definition must be specified if the service is using either the ECS or CODE_DEPLOY deployment controllers.
list
A load balancer object representing the load balancers to use with your service. For more information, see Service Load Balancing in the Amazon Elastic Container Service Developer Guide .
If the service is using the rolling update (ECS ) deployment controller and using either an Application Load Balancer or Network Load Balancer, you must specify one or more target group ARNs to attach to the service. The service-linked role is required for services that make use of multiple target groups. For more information, see Using Service-Linked Roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide .
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair ). During a deployment, AWS CodeDeploy determines which task set in your service has the status PRIMARY and associates one target group with it, and then associates the other target group with the replacement task set. The load balancer can also have up to two listeners: a required listener for production traffic and an optional listener that allows you perform validation tests with Lambda functions before routing production traffic to it.
After you create a service using the ECS deployment controller, the load balancer name or target group ARN, container name, and container port specified in the service definition are immutable. If you are using the CODE_DEPLOY deployment controller, these values can be changed when updating the service.
For Application Load Balancers and Network Load Balancers, this object must contain the load balancer target group ARN, the container name (as it appears in a container definition), and the container port to access from the load balancer. The load balancer name parameter must be omitted. When a task from this service is placed on a container instance, the container instance and port combination is registered as a target in the target group specified here.
For Classic Load Balancers, this object must contain the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer. The target group ARN parameter must be omitted. When a task from this service is placed on a container instance, the container instance is registered with the load balancer specified here.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance , because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
(dict) --
The load balancer configuration to use with a service or task set.
For specific notes and restrictions regarding the use of load balancers with services and task sets, see the CreateService and CreateTaskSet actions.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you are using a Classic Load Balancer the target group ARN should be omitted.
For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering Multiple Target Groups with a Service in the Amazon Elastic Container Service Developer Guide .
For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer. For more information, see Blue/Green Deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .
Warning
If your service's task definition uses the awsvpc network mode (which is required for the Fargate launch type), you must choose ip as the target type, not instance , when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
loadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
list
The details of the service discovery registries to assign to this service. For more information, see Service Discovery .
Note
Service discovery is supported for Fargate tasks if you are using platform version v1.1.0 or later. For more information, see AWS Fargate Platform Versions .
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is AWS Cloud Map. For more information, see CreateService .
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
integer
The number of instantiations of the specified task definition to place and keep running on your cluster.
This is required if schedulingStrategy is REPLICA or is not specified. If schedulingStrategy is DAEMON then this is not required.
string
Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 32 ASCII characters are allowed.
string
The launch type on which to run your service. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
If a launchType is specified, the capacityProviderStrategy parameter must be omitted.
list
The capacity provider strategy to use for the service.
A capacity provider strategy consists of one or more capacity providers along with the base and weight to assign to them. A capacity provider must be associated with the cluster to be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster. Only capacity providers with an ACTIVE or UPDATING status can be used.
If a capacityProviderStrategy is specified, the launchType parameter must be omitted. If no capacityProviderStrategy or launchType is specified, the defaultCapacityProviderStrategy for the cluster is used.
If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New capacity providers can be created with the CreateCapacityProvider API operation.
To use a AWS Fargate capacity provider, specify either the FARGATE or FARGATE_SPOT capacity providers. The AWS Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used.
The PutClusterCapacityProviders API operation is used to update the list of available capacity providers for a cluster after the cluster is created.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) -- [REQUIRED]
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
string
The platform version that your tasks in the service are running on. A platform version is specified only for tasks using the Fargate launch type. If one isn't specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
string
The name or full Amazon Resource Name (ARN) of the IAM role that allows Amazon ECS to make calls to your load balancer on your behalf. This parameter is only permitted if you are using a load balancer with your service and your task definition does not use the awsvpc network mode. If you specify the role parameter, you must also specify a load balancer object with the loadBalancers parameter.
Warning
If your account has already created the Amazon ECS service-linked role, that role is used by default for your service unless you specify a role here. The service-linked role is required if your task definition uses the awsvpc network mode or if the service is configured to use service discovery, an external deployment controller, multiple target groups, or Elastic Inference accelerators in which case you should not specify a role here. For more information, see Using Service-Linked Roles for Amazon ECS in the Amazon Elastic Container Service Developer Guide .
If your specified role has a path other than / , then you must either specify the full role ARN (this is recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/ then you would specify /foo/bar as the role name. For more information, see Friendly Names and Paths in the IAM User Guide .
dict
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
deploymentCircuitBreaker (dict) --
Note
The deployment circuit breaker can only be used for services using the rolling update (ECS ) deployment type.
The deployment circuit breaker determines whether a service deployment will fail if the service can't reach a steady state. If deployment circuit breaker is enabled, a service deployment will transition to a failed state and stop launching new tasks. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
enable (boolean) -- [REQUIRED]
Whether to enable the deployment circuit breaker logic for the service.
rollback (boolean) -- [REQUIRED]
Whether to enable Amazon ECS to roll back the service if a service deployment fails. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
maximumPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
list
An array of placement constraint objects to use for tasks in your service. You can specify a maximum of 10 constraints per task (this limit includes constraints in the task definition and those specified at runtime).
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
Note
If you are using the Fargate launch type, task placement constraints are not supported.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance . For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
list
The placement strategy objects to use for tasks in your service. You can specify a maximum of five strategy rules per service.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone . For the binpack placement strategy, valid values are cpu and memory . For the random placement strategy, this field is not used.
dict
The network configuration for the service. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it is not supported for other network modes. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide .
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) -- [REQUIRED]
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
integer
The period of time, in seconds, that the Amazon ECS service scheduler should ignore unhealthy Elastic Load Balancing target health checks after a task has first started. This is only used when your service is configured to use a load balancer. If your service has a load balancer defined and you don't specify a health check grace period value, the default value of 0 is used.
If your service's tasks take a while to start and respond to Elastic Load Balancing health checks, you can specify a health check grace period of up to 2,147,483,647 seconds. During that time, the Amazon ECS service scheduler ignores health check status. This grace period can prevent the service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.
string
The scheduling strategy to use for the service. For more information, see Services .
There are two service scheduler strategies available:
REPLICA -The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if the service is using the CODE_DEPLOY or EXTERNAL deployment controller types.
DAEMON -The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that do not meet the placement constraints. When you're using this strategy, you don't need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies.
Note
Tasks using the Fargate launch type or the CODE_DEPLOY or EXTERNAL deployment controller types don't support the DAEMON scheduling strategy.
dict
The deployment controller to use for the service.
type (string) -- [REQUIRED]
The deployment controller type to use.
There are three deployment controller types available:
ECS
The rolling update (ECS ) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration .
CODE_DEPLOY
The blue/green (CODE_DEPLOY ) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it.
EXTERNAL
The external (EXTERNAL ) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.
list
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. When a service is deleted, the tags are deleted as well.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
boolean
Specifies whether to enable Amazon ECS managed tags for the tasks within the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide .
string
Specifies whether to propagate the tags from the task definition or the service to the tasks in the service. If no value is specified, the tags are not propagated. Tags can only be propagated to the tasks within the service during service creation. To add tags to a task after service creation, use the TagResource API action.
dict
Response Syntax
{
'service': {
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'deploymentCircuitBreaker': {
'enable': True|False,
'rollback': True|False
},
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'taskSets': [
{
'id': 'string',
'taskSetArn': 'string',
'serviceArn': 'string',
'clusterArn': 'string',
'startedBy': 'string',
'externalId': 'string',
'status': 'string',
'taskDefinition': 'string',
'computedDesiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'scale': {
'value': 123.0,
'unit': 'PERCENT'
},
'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
'stabilityStatusAt': datetime(2015, 1, 1),
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
],
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'failedTasks': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'rolloutState': 'COMPLETED'|'FAILED'|'IN_PROGRESS',
'rolloutStateReason': 'string'
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123,
'schedulingStrategy': 'REPLICA'|'DAEMON',
'deploymentController': {
'type': 'ECS'|'CODE_DEPLOY'|'EXTERNAL'
},
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'createdBy': 'string',
'enableECSManagedTags': True|False,
'propagateTags': 'TASK_DEFINITION'|'SERVICE'
}
}
Response Structure
(dict) --
service (dict) --
The full description of your service following the create call.
If a service is using the ECS deployment controller, the deploymentController and taskSets parameters will not be returned.
If the service is using the CODE_DEPLOY deployment controller, the deploymentController , taskSets and deployments parameters will be returned, however the deployments parameter will be an empty list.
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the Region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, arn:aws:ecs:region:012345678910:service/my-service .
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
(dict) --
The load balancer configuration to use with a service or task set.
For specific notes and restrictions regarding the use of load balancers with services and task sets, see the CreateService and CreateTaskSet actions.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you are using a Classic Load Balancer the target group ARN should be omitted.
For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering Multiple Target Groups with a Service in the Amazon Elastic Container Service Developer Guide .
For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer. For more information, see Blue/Green Deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .
Warning
If your service's task definition uses the awsvpc network mode (which is required for the Fargate launch type), you must choose ip as the target type, not instance , when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
loadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
The details of the service discovery registries to assign to this service. For more information, see Service Discovery .
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is AWS Cloud Map. For more information, see CreateService .
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
status (string) --
The status of the service. The valid values are ACTIVE , DRAINING , or INACTIVE .
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService , and it can be modified with UpdateService .
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running. If no value is specified, it will default to EC2 . Valid values include EC2 and FARGATE . For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
capacityProviderStrategy (list) --
The capacity provider strategy associated with the service.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
platformVersion (string) --
The platform version on which to run your service. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService , and it can be modified with UpdateService .
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
deploymentCircuitBreaker (dict) --
Note
The deployment circuit breaker can only be used for services using the rolling update (ECS ) deployment type.
The deployment circuit breaker determines whether a service deployment will fail if the service can't reach a steady state. If deployment circuit breaker is enabled, a service deployment will transition to a failed state and stop launching new tasks. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
enable (boolean) --
Whether to enable the deployment circuit breaker logic for the service.
rollback (boolean) --
Whether to enable Amazon ECS to roll back the service if a service deployment fails. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
maximumPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
taskSets (list) --
Information about a set of Amazon ECS tasks in either an AWS CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
(dict) --
Information about a set of Amazon ECS tasks in either an AWS CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
id (string) --
The ID of the task set.
taskSetArn (string) --
The Amazon Resource Name (ARN) of the task set.
serviceArn (string) --
The Amazon Resource Name (ARN) of the service the task set exists in.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that the service that hosts the task set exists in.
startedBy (string) --
The tag specified when a task set is started. If the task set is created by an AWS CodeDeploy deployment, the startedBy parameter is CODE_DEPLOY . For a task set created for an external deployment, the startedBy field isn't used.
externalId (string) --
The external ID associated with the task set.
If a task set is created by an AWS CodeDeploy deployment, the externalId parameter contains the AWS CodeDeploy deployment ID.
If a task set is created for an external deployment and is associated with a service discovery registry, the externalId parameter contains the ECS_TASK_SET_EXTERNAL_ID AWS Cloud Map attribute.
status (string) --
The status of the task set. The following describes each state:
PRIMARY
The task set is serving production traffic.
ACTIVE
The task set is not serving production traffic.
DRAINING
The tasks in the task set are being stopped and their corresponding targets are being deregistered from their target group.
taskDefinition (string) --
The task definition the task set is using.
computedDesiredCount (integer) --
The computed desired count for the task set. This is calculated by multiplying the service's desiredCount by the task set's scale percentage. The result is always rounded up. For example, if the computed desired count is 1.2, it rounds up to 2 tasks.
pendingCount (integer) --
The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time or when it is restarted after being in the STOPPED state.
runningCount (integer) --
The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.
createdAt (datetime) --
The Unix timestamp for when the task set was created.
updatedAt (datetime) --
The Unix timestamp for when the task set was last updated.
launchType (string) --
The launch type the tasks in the task set are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
capacityProviderStrategy (list) --
The capacity provider strategy associated with the task set.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
platformVersion (string) --
The platform version on which the tasks in the task set are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
networkConfiguration (dict) --
The network configuration for the task set.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
loadBalancers (list) --
Details on a load balancer that is used with a task set.
(dict) --
The load balancer configuration to use with a service or task set.
For specific notes and restrictions regarding the use of load balancers with services and task sets, see the CreateService and CreateTaskSet actions.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you are using a Classic Load Balancer the target group ARN should be omitted.
For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering Multiple Target Groups with a Service in the Amazon Elastic Container Service Developer Guide .
For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer. For more information, see Blue/Green Deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .
Warning
If your service's task definition uses the awsvpc network mode (which is required for the Fargate launch type), you must choose ip as the target type, not instance , when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
loadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
The details of the service discovery registries to assign to this task set. For more information, see Service Discovery .
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is AWS Cloud Map. For more information, see CreateService .
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
scale (dict) --
A floating-point percentage of the desired number of tasks to place and keep running in the task set.
value (float) --
The value, specified as a percent total of a service's desiredCount , to scale the task set. Accepted values are numbers between 0 and 100.
unit (string) --
The unit of measure for the scale value.
stabilityStatus (string) --
The stability status, which indicates whether the task set has reached a steady state. If the following conditions are met, the task set will be in STEADY_STATE :
The task runningCount is equal to the computedDesiredCount .
The pendingCount is 0 .
There are no tasks running on container instances in the DRAINING status.
All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions are not met, the stability status returns STABILIZING .
stabilityStatusAt (datetime) --
The Unix timestamp for when the task set stability status was retrieved.
tags (list) --
The metadata that you apply to the task set to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment. This is used only when a service uses the ECS deployment controller type.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. The following describes each state:
PRIMARY
The most recent deployment of a service.
ACTIVE
A service deployment that still has running tasks, but are in the process of being replaced with a new PRIMARY deployment.
INACTIVE
A deployment that has been completely replaced.
taskDefinition (string) --
The most recent task definition that was specified for the tasks in the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
failedTasks (integer) --
The number of consecutively failed tasks in the deployment. A task is considered a failure if the service scheduler can't launch the task, the task doesn't transition to a RUNNING state, or if it fails any of its defined health checks and is stopped.
Note
Once a service deployment has one or more successfully running tasks, the failed task count resets to zero and stops being evaluated.
createdAt (datetime) --
The Unix timestamp for when the service deployment was created.
updatedAt (datetime) --
The Unix timestamp for when the service deployment was last updated.
capacityProviderStrategy (list) --
The capacity provider strategy that the deployment is using.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
launchType (string) --
The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
rolloutState (string) --
Note
The rolloutState of a service is only returned for services that use the rolling update (ECS ) deployment type that are not behind a Classic Load Balancer.
The rollout state of the deployment. When a service deployment is started, it begins in an IN_PROGRESS state. When the service reaches a steady state, the deployment will transition to a COMPLETED state. If the service fails to reach a steady state and circuit breaker is enabled, the deployment will transition to a FAILED state. A deployment in FAILED state will launch no new tasks. For more information, see DeploymentCircuitBreaker .
rolloutStateReason (string) --
A description of the rollout state of a deployment.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix timestamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix timestamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
Note
If you are using the Fargate launch type, task placement constraints are not supported.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance . For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone . For the binpack placement strategy, valid values are cpu and memory . For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
schedulingStrategy (string) --
The scheduling strategy to use for the service. For more information, see Services .
There are two service scheduler strategies available:
REPLICA -The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions.
DAEMON -The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that do not meet the placement constraints.
Note
Fargate tasks do not support the DAEMON scheduling strategy.
deploymentController (dict) --
The deployment controller type the service is using. When using the DescribeServices API, this field is omitted if the service is using the ECS deployment controller type.
type (string) --
The deployment controller type to use.
There are three deployment controller types available:
ECS
The rolling update (ECS ) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration .
CODE_DEPLOY
The blue/green (CODE_DEPLOY ) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it.
EXTERNAL
The external (EXTERNAL ) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.
tags (list) --
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
createdBy (string) --
The principal that created the service.
enableECSManagedTags (boolean) --
Specifies whether to enable Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide .
propagateTags (string) --
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags are not propagated.
{'capacityProvider': {'autoScalingGroupProvider': {'managedScaling': {'instanceWarmupPeriod': 'integer'}},
'updateStatus': {'UPDATE_COMPLETE',
'UPDATE_FAILED',
'UPDATE_IN_PROGRESS'}}}
Deletes the specified capacity provider.
Note
The FARGATE and FARGATE_SPOT capacity providers are reserved and cannot be deleted. You can disassociate them from a cluster using either the PutClusterCapacityProviders API or by deleting the cluster.
Prior to a capacity provider being deleted, the capacity provider must be removed from the capacity provider strategy from all services. The UpdateService API can be used to remove a capacity provider from a service's capacity provider strategy. When updating a service, the forceNewDeployment option can be used to ensure that any tasks using the Amazon EC2 instance capacity provided by the capacity provider are transitioned to use the capacity from the remaining capacity providers. Only capacity providers that are not associated with a cluster can be deleted. To remove a capacity provider from a cluster, you can either use PutClusterCapacityProviders or delete the cluster.
See also: AWS API Documentation
Request Syntax
client.delete_capacity_provider(
capacityProvider='string'
)
string
[REQUIRED]
The short name or full Amazon Resource Name (ARN) of the capacity provider to delete.
dict
Response Syntax
{
'capacityProvider': {
'capacityProviderArn': 'string',
'name': 'string',
'status': 'ACTIVE'|'INACTIVE',
'autoScalingGroupProvider': {
'autoScalingGroupArn': 'string',
'managedScaling': {
'status': 'ENABLED'|'DISABLED',
'targetCapacity': 123,
'minimumScalingStepSize': 123,
'maximumScalingStepSize': 123,
'instanceWarmupPeriod': 123
},
'managedTerminationProtection': 'ENABLED'|'DISABLED'
},
'updateStatus': 'DELETE_IN_PROGRESS'|'DELETE_COMPLETE'|'DELETE_FAILED'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_FAILED',
'updateStatusReason': 'string',
'tags': [
{
'key': 'string',
'value': 'string'
},
]
}
}
Response Structure
(dict) --
capacityProvider (dict) --
The details of a capacity provider.
capacityProviderArn (string) --
The Amazon Resource Name (ARN) that identifies the capacity provider.
name (string) --
The name of the capacity provider.
status (string) --
The current status of the capacity provider. Only capacity providers in an ACTIVE state can be used in a cluster. When a capacity provider is successfully deleted, it will have an INACTIVE status.
autoScalingGroupProvider (dict) --
The Auto Scaling group settings for the capacity provider.
autoScalingGroupArn (string) --
The Amazon Resource Name (ARN) that identifies the Auto Scaling group.
managedScaling (dict) --
The managed scaling settings for the Auto Scaling group capacity provider.
status (string) --
Whether or not to enable managed scaling for the capacity provider.
targetCapacity (integer) --
The target capacity value for the capacity provider. The specified value must be greater than 0 and less than or equal to 100 . A value of 100 will result in the Amazon EC2 instances in your Auto Scaling group being completely utilized.
minimumScalingStepSize (integer) --
The minimum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 1 is used.
maximumScalingStepSize (integer) --
The maximum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 10000 is used.
instanceWarmupPeriod (integer) --
The period of time, in seconds, after a newly launched Amazon EC2 instance can contribute to CloudWatch metrics for Auto Scaling group. If this parameter is omitted, the default value of 300 seconds is used.
managedTerminationProtection (string) --
The managed termination protection setting to use for the Auto Scaling group capacity provider. This determines whether the Auto Scaling group has managed termination protection.
Warning
When using managed termination protection, managed scaling must also be used otherwise managed termination protection will not work.
When managed termination protection is enabled, Amazon ECS prevents the Amazon EC2 instances in an Auto Scaling group that contain tasks from being terminated during a scale-in action. The Auto Scaling group and each instance in the Auto Scaling group must have instance protection from scale-in actions enabled as well. For more information, see Instance Protection in the AWS Auto Scaling User Guide .
When managed termination protection is disabled, your Amazon EC2 instances are not protected from termination when the Auto Scaling group scales in.
updateStatus (string) --
The update status of the capacity provider. The following are the possible states that will be returned.
DELETE_IN_PROGRESS
The capacity provider is in the process of being deleted.
DELETE_COMPLETE
The capacity provider has been successfully deleted and will have an INACTIVE status.
DELETE_FAILED
The capacity provider was unable to be deleted. The update status reason will provide further details about why the delete failed.
updateStatusReason (string) --
The update status reason. This provides further details about the update status for the capacity provider.
tags (list) --
The metadata that you apply to the capacity provider to help you categorize and organize it. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
{'service': {'deploymentConfiguration': {'deploymentCircuitBreaker': {'enable': 'boolean',
'rollback': 'boolean'}},
'deployments': {'failedTasks': 'integer',
'rolloutState': 'COMPLETED | FAILED | IN_PROGRESS',
'rolloutStateReason': 'string'}}}
Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you cannot delete it, and you must update the service to a desired task count of zero. For more information, see UpdateService .
Note
When you delete a service, if there are still running tasks that require cleanup, the service status moves from ACTIVE to DRAINING , and the service is no longer visible in the console or in the ListServices API operation. After all tasks have transitioned to either STOPPING or STOPPED status, the service status moves from DRAINING to INACTIVE . Services in the DRAINING or INACTIVE status can still be viewed with the DescribeServices API operation. However, in the future, INACTIVE services may be cleaned up and purged from Amazon ECS record keeping, and DescribeServices calls on those services return a ServiceNotFoundException error.
Warning
If you attempt to create a new service with the same name as an existing service in either ACTIVE or DRAINING status, you receive an error.
See also: AWS API Documentation
Request Syntax
client.delete_service(
cluster='string',
service='string',
force=True|False
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service to delete. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The name of the service to delete.
boolean
If true , allows you to delete a service even if it has not been scaled down to zero tasks. It is only necessary to use this if the service is using the REPLICA scheduling strategy.
dict
Response Syntax
{
'service': {
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'deploymentCircuitBreaker': {
'enable': True|False,
'rollback': True|False
},
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'taskSets': [
{
'id': 'string',
'taskSetArn': 'string',
'serviceArn': 'string',
'clusterArn': 'string',
'startedBy': 'string',
'externalId': 'string',
'status': 'string',
'taskDefinition': 'string',
'computedDesiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'scale': {
'value': 123.0,
'unit': 'PERCENT'
},
'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
'stabilityStatusAt': datetime(2015, 1, 1),
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
],
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'failedTasks': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'rolloutState': 'COMPLETED'|'FAILED'|'IN_PROGRESS',
'rolloutStateReason': 'string'
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123,
'schedulingStrategy': 'REPLICA'|'DAEMON',
'deploymentController': {
'type': 'ECS'|'CODE_DEPLOY'|'EXTERNAL'
},
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'createdBy': 'string',
'enableECSManagedTags': True|False,
'propagateTags': 'TASK_DEFINITION'|'SERVICE'
}
}
Response Structure
(dict) --
service (dict) --
The full description of the deleted service.
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the Region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, arn:aws:ecs:region:012345678910:service/my-service .
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
(dict) --
The load balancer configuration to use with a service or task set.
For specific notes and restrictions regarding the use of load balancers with services and task sets, see the CreateService and CreateTaskSet actions.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you are using a Classic Load Balancer the target group ARN should be omitted.
For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering Multiple Target Groups with a Service in the Amazon Elastic Container Service Developer Guide .
For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer. For more information, see Blue/Green Deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .
Warning
If your service's task definition uses the awsvpc network mode (which is required for the Fargate launch type), you must choose ip as the target type, not instance , when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
loadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
The details of the service discovery registries to assign to this service. For more information, see Service Discovery .
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is AWS Cloud Map. For more information, see CreateService .
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
status (string) --
The status of the service. The valid values are ACTIVE , DRAINING , or INACTIVE .
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService , and it can be modified with UpdateService .
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running. If no value is specified, it will default to EC2 . Valid values include EC2 and FARGATE . For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
capacityProviderStrategy (list) --
The capacity provider strategy associated with the service.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
platformVersion (string) --
The platform version on which to run your service. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService , and it can be modified with UpdateService .
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
deploymentCircuitBreaker (dict) --
Note
The deployment circuit breaker can only be used for services using the rolling update (ECS ) deployment type.
The deployment circuit breaker determines whether a service deployment will fail if the service can't reach a steady state. If deployment circuit breaker is enabled, a service deployment will transition to a failed state and stop launching new tasks. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
enable (boolean) --
Whether to enable the deployment circuit breaker logic for the service.
rollback (boolean) --
Whether to enable Amazon ECS to roll back the service if a service deployment fails. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
maximumPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
taskSets (list) --
Information about a set of Amazon ECS tasks in either an AWS CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
(dict) --
Information about a set of Amazon ECS tasks in either an AWS CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
id (string) --
The ID of the task set.
taskSetArn (string) --
The Amazon Resource Name (ARN) of the task set.
serviceArn (string) --
The Amazon Resource Name (ARN) of the service the task set exists in.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that the service that hosts the task set exists in.
startedBy (string) --
The tag specified when a task set is started. If the task set is created by an AWS CodeDeploy deployment, the startedBy parameter is CODE_DEPLOY . For a task set created for an external deployment, the startedBy field isn't used.
externalId (string) --
The external ID associated with the task set.
If a task set is created by an AWS CodeDeploy deployment, the externalId parameter contains the AWS CodeDeploy deployment ID.
If a task set is created for an external deployment and is associated with a service discovery registry, the externalId parameter contains the ECS_TASK_SET_EXTERNAL_ID AWS Cloud Map attribute.
status (string) --
The status of the task set. The following describes each state:
PRIMARY
The task set is serving production traffic.
ACTIVE
The task set is not serving production traffic.
DRAINING
The tasks in the task set are being stopped and their corresponding targets are being deregistered from their target group.
taskDefinition (string) --
The task definition the task set is using.
computedDesiredCount (integer) --
The computed desired count for the task set. This is calculated by multiplying the service's desiredCount by the task set's scale percentage. The result is always rounded up. For example, if the computed desired count is 1.2, it rounds up to 2 tasks.
pendingCount (integer) --
The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time or when it is restarted after being in the STOPPED state.
runningCount (integer) --
The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.
createdAt (datetime) --
The Unix timestamp for when the task set was created.
updatedAt (datetime) --
The Unix timestamp for when the task set was last updated.
launchType (string) --
The launch type the tasks in the task set are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
capacityProviderStrategy (list) --
The capacity provider strategy associated with the task set.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
platformVersion (string) --
The platform version on which the tasks in the task set are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
networkConfiguration (dict) --
The network configuration for the task set.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
loadBalancers (list) --
Details on a load balancer that is used with a task set.
(dict) --
The load balancer configuration to use with a service or task set.
For specific notes and restrictions regarding the use of load balancers with services and task sets, see the CreateService and CreateTaskSet actions.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you are using a Classic Load Balancer the target group ARN should be omitted.
For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering Multiple Target Groups with a Service in the Amazon Elastic Container Service Developer Guide .
For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer. For more information, see Blue/Green Deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .
Warning
If your service's task definition uses the awsvpc network mode (which is required for the Fargate launch type), you must choose ip as the target type, not instance , when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
loadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
The details of the service discovery registries to assign to this task set. For more information, see Service Discovery .
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is AWS Cloud Map. For more information, see CreateService .
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
scale (dict) --
A floating-point percentage of the desired number of tasks to place and keep running in the task set.
value (float) --
The value, specified as a percent total of a service's desiredCount , to scale the task set. Accepted values are numbers between 0 and 100.
unit (string) --
The unit of measure for the scale value.
stabilityStatus (string) --
The stability status, which indicates whether the task set has reached a steady state. If the following conditions are met, the task set will be in STEADY_STATE :
The task runningCount is equal to the computedDesiredCount .
The pendingCount is 0 .
There are no tasks running on container instances in the DRAINING status.
All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions are not met, the stability status returns STABILIZING .
stabilityStatusAt (datetime) --
The Unix timestamp for when the task set stability status was retrieved.
tags (list) --
The metadata that you apply to the task set to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment. This is used only when a service uses the ECS deployment controller type.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. The following describes each state:
PRIMARY
The most recent deployment of a service.
ACTIVE
A service deployment that still has running tasks, but are in the process of being replaced with a new PRIMARY deployment.
INACTIVE
A deployment that has been completely replaced.
taskDefinition (string) --
The most recent task definition that was specified for the tasks in the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
failedTasks (integer) --
The number of consecutively failed tasks in the deployment. A task is considered a failure if the service scheduler can't launch the task, the task doesn't transition to a RUNNING state, or if it fails any of its defined health checks and is stopped.
Note
Once a service deployment has one or more successfully running tasks, the failed task count resets to zero and stops being evaluated.
createdAt (datetime) --
The Unix timestamp for when the service deployment was created.
updatedAt (datetime) --
The Unix timestamp for when the service deployment was last updated.
capacityProviderStrategy (list) --
The capacity provider strategy that the deployment is using.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
launchType (string) --
The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
rolloutState (string) --
Note
The rolloutState of a service is only returned for services that use the rolling update (ECS ) deployment type that are not behind a Classic Load Balancer.
The rollout state of the deployment. When a service deployment is started, it begins in an IN_PROGRESS state. When the service reaches a steady state, the deployment will transition to a COMPLETED state. If the service fails to reach a steady state and circuit breaker is enabled, the deployment will transition to a FAILED state. A deployment in FAILED state will launch no new tasks. For more information, see DeploymentCircuitBreaker .
rolloutStateReason (string) --
A description of the rollout state of a deployment.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix timestamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix timestamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
Note
If you are using the Fargate launch type, task placement constraints are not supported.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance . For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone . For the binpack placement strategy, valid values are cpu and memory . For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
schedulingStrategy (string) --
The scheduling strategy to use for the service. For more information, see Services .
There are two service scheduler strategies available:
REPLICA -The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions.
DAEMON -The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that do not meet the placement constraints.
Note
Fargate tasks do not support the DAEMON scheduling strategy.
deploymentController (dict) --
The deployment controller type the service is using. When using the DescribeServices API, this field is omitted if the service is using the ECS deployment controller type.
type (string) --
The deployment controller type to use.
There are three deployment controller types available:
ECS
The rolling update (ECS ) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration .
CODE_DEPLOY
The blue/green (CODE_DEPLOY ) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it.
EXTERNAL
The external (EXTERNAL ) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.
tags (list) --
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
createdBy (string) --
The principal that created the service.
enableECSManagedTags (boolean) --
Specifies whether to enable Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide .
propagateTags (string) --
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags are not propagated.
{'capacityProviders': {'autoScalingGroupProvider': {'managedScaling': {'instanceWarmupPeriod': 'integer'}},
'updateStatus': {'UPDATE_COMPLETE',
'UPDATE_FAILED',
'UPDATE_IN_PROGRESS'}}}
Describes one or more of your capacity providers.
See also: AWS API Documentation
Request Syntax
client.describe_capacity_providers(
capacityProviders=[
'string',
],
include=[
'TAGS',
],
maxResults=123,
nextToken='string'
)
list
The short name or full Amazon Resource Name (ARN) of one or more capacity providers. Up to 100 capacity providers can be described in an action.
(string) --
list
Specifies whether or not you want to see the resource tags for the capacity provider. If TAGS is specified, the tags are included in the response. If this field is omitted, tags are not included in the response.
(string) --
integer
The maximum number of account setting results returned by DescribeCapacityProviders in paginated output. When this parameter is used, DescribeCapacityProviders only returns maxResults results in a single page along with a nextToken response element. The remaining results of the initial request can be seen by sending another DescribeCapacityProviders request with the returned nextToken value. This value can be between 1 and 10. If this parameter is not used, then DescribeCapacityProviders returns up to 10 results and a nextToken value if applicable.
string
The nextToken value returned from a previous paginated DescribeCapacityProviders request where maxResults was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.
Note
This token should be treated as an opaque identifier that is only used to retrieve the next items in a list and not for other programmatic purposes.
dict
Response Syntax
{
'capacityProviders': [
{
'capacityProviderArn': 'string',
'name': 'string',
'status': 'ACTIVE'|'INACTIVE',
'autoScalingGroupProvider': {
'autoScalingGroupArn': 'string',
'managedScaling': {
'status': 'ENABLED'|'DISABLED',
'targetCapacity': 123,
'minimumScalingStepSize': 123,
'maximumScalingStepSize': 123,
'instanceWarmupPeriod': 123
},
'managedTerminationProtection': 'ENABLED'|'DISABLED'
},
'updateStatus': 'DELETE_IN_PROGRESS'|'DELETE_COMPLETE'|'DELETE_FAILED'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_FAILED',
'updateStatusReason': 'string',
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
],
'failures': [
{
'arn': 'string',
'reason': 'string',
'detail': 'string'
},
],
'nextToken': 'string'
}
Response Structure
(dict) --
capacityProviders (list) --
The list of capacity providers.
(dict) --
The details of a capacity provider.
capacityProviderArn (string) --
The Amazon Resource Name (ARN) that identifies the capacity provider.
name (string) --
The name of the capacity provider.
status (string) --
The current status of the capacity provider. Only capacity providers in an ACTIVE state can be used in a cluster. When a capacity provider is successfully deleted, it will have an INACTIVE status.
autoScalingGroupProvider (dict) --
The Auto Scaling group settings for the capacity provider.
autoScalingGroupArn (string) --
The Amazon Resource Name (ARN) that identifies the Auto Scaling group.
managedScaling (dict) --
The managed scaling settings for the Auto Scaling group capacity provider.
status (string) --
Whether or not to enable managed scaling for the capacity provider.
targetCapacity (integer) --
The target capacity value for the capacity provider. The specified value must be greater than 0 and less than or equal to 100 . A value of 100 will result in the Amazon EC2 instances in your Auto Scaling group being completely utilized.
minimumScalingStepSize (integer) --
The minimum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 1 is used.
maximumScalingStepSize (integer) --
The maximum number of container instances that Amazon ECS will scale in or scale out at one time. If this parameter is omitted, the default value of 10000 is used.
instanceWarmupPeriod (integer) --
The period of time, in seconds, after a newly launched Amazon EC2 instance can contribute to CloudWatch metrics for Auto Scaling group. If this parameter is omitted, the default value of 300 seconds is used.
managedTerminationProtection (string) --
The managed termination protection setting to use for the Auto Scaling group capacity provider. This determines whether the Auto Scaling group has managed termination protection.
Warning
When using managed termination protection, managed scaling must also be used otherwise managed termination protection will not work.
When managed termination protection is enabled, Amazon ECS prevents the Amazon EC2 instances in an Auto Scaling group that contain tasks from being terminated during a scale-in action. The Auto Scaling group and each instance in the Auto Scaling group must have instance protection from scale-in actions enabled as well. For more information, see Instance Protection in the AWS Auto Scaling User Guide .
When managed termination protection is disabled, your Amazon EC2 instances are not protected from termination when the Auto Scaling group scales in.
updateStatus (string) --
The update status of the capacity provider. The following are the possible states that will be returned.
DELETE_IN_PROGRESS
The capacity provider is in the process of being deleted.
DELETE_COMPLETE
The capacity provider has been successfully deleted and will have an INACTIVE status.
DELETE_FAILED
The capacity provider was unable to be deleted. The update status reason will provide further details about why the delete failed.
updateStatusReason (string) --
The update status reason. This provides further details about the update status for the capacity provider.
tags (list) --
The metadata that you apply to the capacity provider to help you categorize and organize it. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
failures (list) --
Any failures associated with the call.
(dict) --
A failed resource. For a list of common causes, see API failure reasons in the Amazon Elastic Container Service Developer Guide .
arn (string) --
The Amazon Resource Name (ARN) of the failed resource.
reason (string) --
The reason for the failure.
detail (string) --
The details of the failure.
nextToken (string) --
The nextToken value to include in a future DescribeCapacityProviders request. When the results of a DescribeCapacityProviders request exceed maxResults , this value can be used to retrieve the next page of results. This value is null when there are no more results to return.
{'services': {'deploymentConfiguration': {'deploymentCircuitBreaker': {'enable': 'boolean',
'rollback': 'boolean'}},
'deployments': {'failedTasks': 'integer',
'rolloutState': 'COMPLETED | FAILED | '
'IN_PROGRESS',
'rolloutStateReason': 'string'}}}
Describes the specified services running in your cluster.
See also: AWS API Documentation
Request Syntax
client.describe_services(
cluster='string',
services=[
'string',
],
include=[
'TAGS',
]
)
string
The short name or full Amazon Resource Name (ARN)the cluster that hosts the service to describe. If you do not specify a cluster, the default cluster is assumed. This parameter is required if the service or services you are describing were launched in any cluster other than the default cluster.
list
[REQUIRED]
A list of services to describe. You may specify up to 10 services to describe in a single operation.
(string) --
list
Specifies whether you want to see the resource tags for the service. If TAGS is specified, the tags are included in the response. If this field is omitted, tags are not included in the response.
(string) --
dict
Response Syntax
{
'services': [
{
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'deploymentCircuitBreaker': {
'enable': True|False,
'rollback': True|False
},
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'taskSets': [
{
'id': 'string',
'taskSetArn': 'string',
'serviceArn': 'string',
'clusterArn': 'string',
'startedBy': 'string',
'externalId': 'string',
'status': 'string',
'taskDefinition': 'string',
'computedDesiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'scale': {
'value': 123.0,
'unit': 'PERCENT'
},
'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
'stabilityStatusAt': datetime(2015, 1, 1),
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
],
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'failedTasks': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'rolloutState': 'COMPLETED'|'FAILED'|'IN_PROGRESS',
'rolloutStateReason': 'string'
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123,
'schedulingStrategy': 'REPLICA'|'DAEMON',
'deploymentController': {
'type': 'ECS'|'CODE_DEPLOY'|'EXTERNAL'
},
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'createdBy': 'string',
'enableECSManagedTags': True|False,
'propagateTags': 'TASK_DEFINITION'|'SERVICE'
},
],
'failures': [
{
'arn': 'string',
'reason': 'string',
'detail': 'string'
},
]
}
Response Structure
(dict) --
services (list) --
The list of services described.
(dict) --
Details on a service within a cluster
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the Region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, arn:aws:ecs:region:012345678910:service/my-service .
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
(dict) --
The load balancer configuration to use with a service or task set.
For specific notes and restrictions regarding the use of load balancers with services and task sets, see the CreateService and CreateTaskSet actions.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you are using a Classic Load Balancer the target group ARN should be omitted.
For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering Multiple Target Groups with a Service in the Amazon Elastic Container Service Developer Guide .
For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer. For more information, see Blue/Green Deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .
Warning
If your service's task definition uses the awsvpc network mode (which is required for the Fargate launch type), you must choose ip as the target type, not instance , when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
loadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
The details of the service discovery registries to assign to this service. For more information, see Service Discovery .
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is AWS Cloud Map. For more information, see CreateService .
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
status (string) --
The status of the service. The valid values are ACTIVE , DRAINING , or INACTIVE .
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService , and it can be modified with UpdateService .
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running. If no value is specified, it will default to EC2 . Valid values include EC2 and FARGATE . For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
capacityProviderStrategy (list) --
The capacity provider strategy associated with the service.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
platformVersion (string) --
The platform version on which to run your service. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService , and it can be modified with UpdateService .
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
deploymentCircuitBreaker (dict) --
Note
The deployment circuit breaker can only be used for services using the rolling update (ECS ) deployment type.
The deployment circuit breaker determines whether a service deployment will fail if the service can't reach a steady state. If deployment circuit breaker is enabled, a service deployment will transition to a failed state and stop launching new tasks. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
enable (boolean) --
Whether to enable the deployment circuit breaker logic for the service.
rollback (boolean) --
Whether to enable Amazon ECS to roll back the service if a service deployment fails. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
maximumPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
taskSets (list) --
Information about a set of Amazon ECS tasks in either an AWS CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
(dict) --
Information about a set of Amazon ECS tasks in either an AWS CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
id (string) --
The ID of the task set.
taskSetArn (string) --
The Amazon Resource Name (ARN) of the task set.
serviceArn (string) --
The Amazon Resource Name (ARN) of the service the task set exists in.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that the service that hosts the task set exists in.
startedBy (string) --
The tag specified when a task set is started. If the task set is created by an AWS CodeDeploy deployment, the startedBy parameter is CODE_DEPLOY . For a task set created for an external deployment, the startedBy field isn't used.
externalId (string) --
The external ID associated with the task set.
If a task set is created by an AWS CodeDeploy deployment, the externalId parameter contains the AWS CodeDeploy deployment ID.
If a task set is created for an external deployment and is associated with a service discovery registry, the externalId parameter contains the ECS_TASK_SET_EXTERNAL_ID AWS Cloud Map attribute.
status (string) --
The status of the task set. The following describes each state:
PRIMARY
The task set is serving production traffic.
ACTIVE
The task set is not serving production traffic.
DRAINING
The tasks in the task set are being stopped and their corresponding targets are being deregistered from their target group.
taskDefinition (string) --
The task definition the task set is using.
computedDesiredCount (integer) --
The computed desired count for the task set. This is calculated by multiplying the service's desiredCount by the task set's scale percentage. The result is always rounded up. For example, if the computed desired count is 1.2, it rounds up to 2 tasks.
pendingCount (integer) --
The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time or when it is restarted after being in the STOPPED state.
runningCount (integer) --
The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.
createdAt (datetime) --
The Unix timestamp for when the task set was created.
updatedAt (datetime) --
The Unix timestamp for when the task set was last updated.
launchType (string) --
The launch type the tasks in the task set are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
capacityProviderStrategy (list) --
The capacity provider strategy associated with the task set.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
platformVersion (string) --
The platform version on which the tasks in the task set are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
networkConfiguration (dict) --
The network configuration for the task set.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
loadBalancers (list) --
Details on a load balancer that is used with a task set.
(dict) --
The load balancer configuration to use with a service or task set.
For specific notes and restrictions regarding the use of load balancers with services and task sets, see the CreateService and CreateTaskSet actions.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you are using a Classic Load Balancer the target group ARN should be omitted.
For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering Multiple Target Groups with a Service in the Amazon Elastic Container Service Developer Guide .
For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer. For more information, see Blue/Green Deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .
Warning
If your service's task definition uses the awsvpc network mode (which is required for the Fargate launch type), you must choose ip as the target type, not instance , when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
loadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
The details of the service discovery registries to assign to this task set. For more information, see Service Discovery .
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is AWS Cloud Map. For more information, see CreateService .
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
scale (dict) --
A floating-point percentage of the desired number of tasks to place and keep running in the task set.
value (float) --
The value, specified as a percent total of a service's desiredCount , to scale the task set. Accepted values are numbers between 0 and 100.
unit (string) --
The unit of measure for the scale value.
stabilityStatus (string) --
The stability status, which indicates whether the task set has reached a steady state. If the following conditions are met, the task set will be in STEADY_STATE :
The task runningCount is equal to the computedDesiredCount .
The pendingCount is 0 .
There are no tasks running on container instances in the DRAINING status.
All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions are not met, the stability status returns STABILIZING .
stabilityStatusAt (datetime) --
The Unix timestamp for when the task set stability status was retrieved.
tags (list) --
The metadata that you apply to the task set to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment. This is used only when a service uses the ECS deployment controller type.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. The following describes each state:
PRIMARY
The most recent deployment of a service.
ACTIVE
A service deployment that still has running tasks, but are in the process of being replaced with a new PRIMARY deployment.
INACTIVE
A deployment that has been completely replaced.
taskDefinition (string) --
The most recent task definition that was specified for the tasks in the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
failedTasks (integer) --
The number of consecutively failed tasks in the deployment. A task is considered a failure if the service scheduler can't launch the task, the task doesn't transition to a RUNNING state, or if it fails any of its defined health checks and is stopped.
Note
Once a service deployment has one or more successfully running tasks, the failed task count resets to zero and stops being evaluated.
createdAt (datetime) --
The Unix timestamp for when the service deployment was created.
updatedAt (datetime) --
The Unix timestamp for when the service deployment was last updated.
capacityProviderStrategy (list) --
The capacity provider strategy that the deployment is using.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
launchType (string) --
The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
rolloutState (string) --
Note
The rolloutState of a service is only returned for services that use the rolling update (ECS ) deployment type that are not behind a Classic Load Balancer.
The rollout state of the deployment. When a service deployment is started, it begins in an IN_PROGRESS state. When the service reaches a steady state, the deployment will transition to a COMPLETED state. If the service fails to reach a steady state and circuit breaker is enabled, the deployment will transition to a FAILED state. A deployment in FAILED state will launch no new tasks. For more information, see DeploymentCircuitBreaker .
rolloutStateReason (string) --
A description of the rollout state of a deployment.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix timestamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix timestamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
Note
If you are using the Fargate launch type, task placement constraints are not supported.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance . For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone . For the binpack placement strategy, valid values are cpu and memory . For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
schedulingStrategy (string) --
The scheduling strategy to use for the service. For more information, see Services .
There are two service scheduler strategies available:
REPLICA -The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions.
DAEMON -The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that do not meet the placement constraints.
Note
Fargate tasks do not support the DAEMON scheduling strategy.
deploymentController (dict) --
The deployment controller type the service is using. When using the DescribeServices API, this field is omitted if the service is using the ECS deployment controller type.
type (string) --
The deployment controller type to use.
There are three deployment controller types available:
ECS
The rolling update (ECS ) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration .
CODE_DEPLOY
The blue/green (CODE_DEPLOY ) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it.
EXTERNAL
The external (EXTERNAL ) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.
tags (list) --
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
createdBy (string) --
The principal that created the service.
enableECSManagedTags (boolean) --
Specifies whether to enable Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide .
propagateTags (string) --
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags are not propagated.
failures (list) --
Any failures associated with the call.
(dict) --
A failed resource. For a list of common causes, see API failure reasons in the Amazon Elastic Container Service Developer Guide .
arn (string) --
The Amazon Resource Name (ARN) of the failed resource.
reason (string) --
The reason for the failure.
detail (string) --
The details of the failure.
{'deploymentConfiguration': {'deploymentCircuitBreaker': {'enable': 'boolean',
'rollback': 'boolean'}}}
Response {'service': {'deploymentConfiguration': {'deploymentCircuitBreaker': {'enable': 'boolean',
'rollback': 'boolean'}},
'deployments': {'failedTasks': 'integer',
'rolloutState': 'COMPLETED | FAILED | IN_PROGRESS',
'rolloutStateReason': 'string'}}}
Warning
Updating the task placement strategies and constraints on an Amazon ECS service remains in preview and is a Beta Service as defined by and subject to the Beta Service Participation Service Terms located at https://aws.amazon.com/service-terms ("Beta Terms"). These Beta Terms apply to your participation in this preview.
Modifies the parameters of a service.
For services using the rolling update (ECS ) deployment controller, the desired count, deployment configuration, network configuration, task placement constraints and strategies, or task definition used can be updated.
For services using the blue/green (CODE_DEPLOY ) deployment controller, only the desired count, deployment configuration, task placement constraints and strategies, and health check grace period can be updated using this API. If the network configuration, platform version, or task definition need to be updated, a new AWS CodeDeploy deployment should be created. For more information, see CreateDeployment in the AWS CodeDeploy API Reference .
For services using an external deployment controller, you can update only the desired count, task placement constraints and strategies, and health check grace period using this API. If the launch type, load balancer, network configuration, platform version, or task definition need to be updated, you should create a new task set. For more information, see CreateTaskSet .
You can add to or subtract from the number of instantiations of a task definition in a service by specifying the cluster that the service is running in and a new desiredCount parameter.
If you have updated the Docker image of your application, you can create a new task definition with that image and deploy it to your service. The service scheduler uses the minimum healthy percent and maximum percent parameters (in the service's deployment configuration) to determine the deployment strategy.
Note
If your updated Docker image uses the same tag as what is in the existing task definition for your service (for example, my_image:latest ), you do not need to create a new revision of your task definition. You can update the service using the forceNewDeployment option. The new tasks launched by the deployment pull the current image/tag combination from your repository when they start.
You can also update the deployment configuration of a service. When a deployment is triggered by updating the task definition of a service, the service scheduler uses the deployment configuration parameters, minimumHealthyPercent and maximumPercent , to determine the deployment strategy.
If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount temporarily during a deployment. For example, if desiredCount is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they are in the RUNNING state and the container instance they are hosted on is reported as healthy by the load balancer.
The maximumPercent parameter represents an upper limit on the number of running tasks during a deployment, which enables you to define the deployment batch size. For example, if desiredCount is four tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available).
When UpdateService stops a task during a deployment, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM and a 30-second timeout, after which SIGKILL is sent and the containers are forcibly stopped. If the container handles the SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.
When the service scheduler launches new tasks, it determines task placement in your cluster with the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although you can choose a different placement strategy):
Sort the valid container instances by the fewest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in your cluster using the following logic:
Sort the container instances by the largest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have two, container instances in either zone B or C are considered optimal for termination.
Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the largest number of running tasks for this service.
See also: AWS API Documentation
Request Syntax
client.update_service(
cluster='string',
service='string',
desiredCount=123,
taskDefinition='string',
capacityProviderStrategy=[
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
deploymentConfiguration={
'deploymentCircuitBreaker': {
'enable': True|False,
'rollback': True|False
},
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
networkConfiguration={
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
placementConstraints=[
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
placementStrategy=[
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
platformVersion='string',
forceNewDeployment=True|False,
healthCheckGracePeriodSeconds=123
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that your service is running on. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The name of the service to update.
integer
The number of instantiations of the task to place and keep running in your service.
string
The family and revision (family:revision ) or full ARN of the task definition to run in your service. If a revision is not specified, the latest ACTIVE revision is used. If you modify the task definition with UpdateService , Amazon ECS spawns a task with the new version of the task definition and then stops an old task after the new version is running.
list
The capacity provider strategy to update the service to use.
If the service is using the default capacity provider strategy for the cluster, the service can be updated to use one or more capacity providers as opposed to the default capacity provider strategy. However, when a service is using a capacity provider strategy that is not the default capacity provider strategy, the service cannot be updated to use the cluster's default capacity provider strategy.
A capacity provider strategy consists of one or more capacity providers along with the base and weight to assign to them. A capacity provider must be associated with the cluster to be used in a capacity provider strategy. The PutClusterCapacityProviders API is used to associate a capacity provider with a cluster. Only capacity providers with an ACTIVE or UPDATING status can be used.
If specifying a capacity provider that uses an Auto Scaling group, the capacity provider must already be created. New capacity providers can be created with the CreateCapacityProvider API operation.
To use a AWS Fargate capacity provider, specify either the FARGATE or FARGATE_SPOT capacity providers. The AWS Fargate capacity providers are available to all accounts and only need to be associated with a cluster to be used.
The PutClusterCapacityProviders API operation is used to update the list of available capacity providers for a cluster after the cluster is created.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) -- [REQUIRED]
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
dict
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
deploymentCircuitBreaker (dict) --
Note
The deployment circuit breaker can only be used for services using the rolling update (ECS ) deployment type.
The deployment circuit breaker determines whether a service deployment will fail if the service can't reach a steady state. If deployment circuit breaker is enabled, a service deployment will transition to a failed state and stop launching new tasks. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
enable (boolean) -- [REQUIRED]
Whether to enable the deployment circuit breaker logic for the service.
rollback (boolean) -- [REQUIRED]
Whether to enable Amazon ECS to roll back the service if a service deployment fails. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
maximumPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
dict
An object representing the network configuration for a task or service.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) -- [REQUIRED]
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
list
An array of task placement constraint objects to update the service to use. If no value is specified, the existing placement constraints for the service will remain unchanged. If this value is specified, it will override any existing placement constraints defined for the service. To remove all existing placement constraints, specify an empty array.
You can specify a maximum of 10 constraints per task (this limit includes constraints in the task definition and those specified at runtime).
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
Note
If you are using the Fargate launch type, task placement constraints are not supported.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance . For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
list
The task placement strategy objects to update the service to use. If no value is specified, the existing placement strategy for the service will remain unchanged. If this value is specified, it will override the existing placement strategy defined for the service. To remove an existing placement strategy, specify an empty object.
You can specify a maximum of five strategy rules per service.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone . For the binpack placement strategy, valid values are cpu and memory . For the random placement strategy, this field is not used.
string
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If a platform version is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
boolean
Whether to force a new deployment of the service. Deployments are not forced by default. You can use this option to trigger a new deployment with no service definition changes. For example, you can update a service's tasks to use a newer Docker image with the same image/tag combination (my_image:latest ) or to roll Fargate tasks onto a newer platform version.
integer
The period of time, in seconds, that the Amazon ECS service scheduler should ignore unhealthy Elastic Load Balancing target health checks after a task has first started. This is only valid if your service is configured to use a load balancer. If your service's tasks take a while to start and respond to Elastic Load Balancing health checks, you can specify a health check grace period of up to 2,147,483,647 seconds. During that time, the Amazon ECS service scheduler ignores the Elastic Load Balancing health check status. This grace period can prevent the ECS service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.
dict
Response Syntax
{
'service': {
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'deploymentCircuitBreaker': {
'enable': True|False,
'rollback': True|False
},
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'taskSets': [
{
'id': 'string',
'taskSetArn': 'string',
'serviceArn': 'string',
'clusterArn': 'string',
'startedBy': 'string',
'externalId': 'string',
'status': 'string',
'taskDefinition': 'string',
'computedDesiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'scale': {
'value': 123.0,
'unit': 'PERCENT'
},
'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
'stabilityStatusAt': datetime(2015, 1, 1),
'tags': [
{
'key': 'string',
'value': 'string'
},
]
},
],
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'failedTasks': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'capacityProviderStrategy': [
{
'capacityProvider': 'string',
'weight': 123,
'base': 123
},
],
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'rolloutState': 'COMPLETED'|'FAILED'|'IN_PROGRESS',
'rolloutStateReason': 'string'
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123,
'schedulingStrategy': 'REPLICA'|'DAEMON',
'deploymentController': {
'type': 'ECS'|'CODE_DEPLOY'|'EXTERNAL'
},
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'createdBy': 'string',
'enableECSManagedTags': True|False,
'propagateTags': 'TASK_DEFINITION'|'SERVICE'
}
}
Response Structure
(dict) --
service (dict) --
The full description of your service following the update call.
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the Region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, arn:aws:ecs:region:012345678910:service/my-service .
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, and hyphens are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
(dict) --
The load balancer configuration to use with a service or task set.
For specific notes and restrictions regarding the use of load balancers with services and task sets, see the CreateService and CreateTaskSet actions.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you are using a Classic Load Balancer the target group ARN should be omitted.
For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering Multiple Target Groups with a Service in the Amazon Elastic Container Service Developer Guide .
For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer. For more information, see Blue/Green Deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .
Warning
If your service's task definition uses the awsvpc network mode (which is required for the Fargate launch type), you must choose ip as the target type, not instance , when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
loadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
The details of the service discovery registries to assign to this service. For more information, see Service Discovery .
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is AWS Cloud Map. For more information, see CreateService .
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
status (string) --
The status of the service. The valid values are ACTIVE , DRAINING , or INACTIVE .
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService , and it can be modified with UpdateService .
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running. If no value is specified, it will default to EC2 . Valid values include EC2 and FARGATE . For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
capacityProviderStrategy (list) --
The capacity provider strategy associated with the service.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
platformVersion (string) --
The platform version on which to run your service. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService , and it can be modified with UpdateService .
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
deploymentCircuitBreaker (dict) --
Note
The deployment circuit breaker can only be used for services using the rolling update (ECS ) deployment type.
The deployment circuit breaker determines whether a service deployment will fail if the service can't reach a steady state. If deployment circuit breaker is enabled, a service deployment will transition to a failed state and stop launching new tasks. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
enable (boolean) --
Whether to enable the deployment circuit breaker logic for the service.
rollback (boolean) --
Whether to enable Amazon ECS to roll back the service if a service deployment fails. If rollback is enabled, when a service deployment fails, the service is rolled back to the last deployment that completed successfully.
maximumPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update (ECS ) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green (CODE_DEPLOY ) or EXTERNAL deployment types and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
taskSets (list) --
Information about a set of Amazon ECS tasks in either an AWS CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
(dict) --
Information about a set of Amazon ECS tasks in either an AWS CodeDeploy or an EXTERNAL deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
id (string) --
The ID of the task set.
taskSetArn (string) --
The Amazon Resource Name (ARN) of the task set.
serviceArn (string) --
The Amazon Resource Name (ARN) of the service the task set exists in.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that the service that hosts the task set exists in.
startedBy (string) --
The tag specified when a task set is started. If the task set is created by an AWS CodeDeploy deployment, the startedBy parameter is CODE_DEPLOY . For a task set created for an external deployment, the startedBy field isn't used.
externalId (string) --
The external ID associated with the task set.
If a task set is created by an AWS CodeDeploy deployment, the externalId parameter contains the AWS CodeDeploy deployment ID.
If a task set is created for an external deployment and is associated with a service discovery registry, the externalId parameter contains the ECS_TASK_SET_EXTERNAL_ID AWS Cloud Map attribute.
status (string) --
The status of the task set. The following describes each state:
PRIMARY
The task set is serving production traffic.
ACTIVE
The task set is not serving production traffic.
DRAINING
The tasks in the task set are being stopped and their corresponding targets are being deregistered from their target group.
taskDefinition (string) --
The task definition the task set is using.
computedDesiredCount (integer) --
The computed desired count for the task set. This is calculated by multiplying the service's desiredCount by the task set's scale percentage. The result is always rounded up. For example, if the computed desired count is 1.2, it rounds up to 2 tasks.
pendingCount (integer) --
The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time or when it is restarted after being in the STOPPED state.
runningCount (integer) --
The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.
createdAt (datetime) --
The Unix timestamp for when the task set was created.
updatedAt (datetime) --
The Unix timestamp for when the task set was last updated.
launchType (string) --
The launch type the tasks in the task set are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
capacityProviderStrategy (list) --
The capacity provider strategy associated with the task set.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
platformVersion (string) --
The platform version on which the tasks in the task set are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
networkConfiguration (dict) --
The network configuration for the task set.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
loadBalancers (list) --
Details on a load balancer that is used with a task set.
(dict) --
The load balancer configuration to use with a service or task set.
For specific notes and restrictions regarding the use of load balancers with services and task sets, see the CreateService and CreateTaskSet actions.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service or task set.
A target group ARN is only specified when using an Application Load Balancer or Network Load Balancer. If you are using a Classic Load Balancer the target group ARN should be omitted.
For services using the ECS deployment controller, you can specify one or multiple target groups. For more information, see Registering Multiple Target Groups with a Service in the Amazon Elastic Container Service Developer Guide .
For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer. For more information, see Blue/Green Deployment with CodeDeploy in the Amazon Elastic Container Service Developer Guide .
Warning
If your service's task definition uses the awsvpc network mode (which is required for the Fargate launch type), you must choose ip as the target type, not instance , when creating your target groups because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
loadBalancerName (string) --
The name of the load balancer to associate with the Amazon ECS service or task set.
A load balancer name is only specified when using a Classic Load Balancer. If you are using an Application Load Balancer or a Network Load Balancer the load balancer name parameter should be omitted.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the task definition the tasks in the service are using. For tasks that use the EC2 launch type, the container instance they are launched on must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
The details of the service discovery registries to assign to this task set. For more information, see Service Discovery .
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is AWS Cloud Map. For more information, see CreateService .
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
scale (dict) --
A floating-point percentage of the desired number of tasks to place and keep running in the task set.
value (float) --
The value, specified as a percent total of a service's desiredCount , to scale the task set. Accepted values are numbers between 0 and 100.
unit (string) --
The unit of measure for the scale value.
stabilityStatus (string) --
The stability status, which indicates whether the task set has reached a steady state. If the following conditions are met, the task set will be in STEADY_STATE :
The task runningCount is equal to the computedDesiredCount .
The pendingCount is 0 .
There are no tasks running on container instances in the DRAINING status.
All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions are not met, the stability status returns STABILIZING .
stabilityStatusAt (datetime) --
The Unix timestamp for when the task set stability status was retrieved.
tags (list) --
The metadata that you apply to the task set to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment. This is used only when a service uses the ECS deployment controller type.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. The following describes each state:
PRIMARY
The most recent deployment of a service.
ACTIVE
A service deployment that still has running tasks, but are in the process of being replaced with a new PRIMARY deployment.
INACTIVE
A deployment that has been completely replaced.
taskDefinition (string) --
The most recent task definition that was specified for the tasks in the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
failedTasks (integer) --
The number of consecutively failed tasks in the deployment. A task is considered a failure if the service scheduler can't launch the task, the task doesn't transition to a RUNNING state, or if it fails any of its defined health checks and is stopped.
Note
Once a service deployment has one or more successfully running tasks, the failed task count resets to zero and stops being evaluated.
createdAt (datetime) --
The Unix timestamp for when the service deployment was created.
updatedAt (datetime) --
The Unix timestamp for when the service deployment was last updated.
capacityProviderStrategy (list) --
The capacity provider strategy that the deployment is using.
(dict) --
The details of a capacity provider strategy.
capacityProvider (string) --
The short name of the capacity provider.
weight (integer) --
The weight value designates the relative percentage of the total number of tasks launched that should use the specified capacity provider.
For example, if you have a strategy that contains two capacity providers and both have a weight of 1 , then when the base is satisfied, the tasks will be split evenly across the two capacity providers. Using that same logic, if you specify a weight of 1 for capacityProviderA and a weight of 4 for capacityProviderB , then for every one task that is run using capacityProviderA , four tasks would use capacityProviderB .
base (integer) --
The base value designates how many tasks, at a minimum, to run on the specified capacity provider. Only one capacity provider in a capacity provider strategy can have a base defined.
launchType (string) --
The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide .
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide .
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
rolloutState (string) --
Note
The rolloutState of a service is only returned for services that use the rolling update (ECS ) deployment type that are not behind a Classic Load Balancer.
The rollout state of the deployment. When a service deployment is started, it begins in an IN_PROGRESS state. When the service reaches a steady state, the deployment will transition to a COMPLETED state. If the service fails to reach a steady state and circuit breaker is enabled, the deployment will transition to a FAILED state. A deployment in FAILED state will launch no new tasks. For more information, see DeploymentCircuitBreaker .
rolloutStateReason (string) --
A description of the rollout state of a deployment.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix timestamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix timestamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide .
Note
If you are using the Fargate launch type, task placement constraints are not supported.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance . For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide .
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide .
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host , which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone . For the binpack placement strategy, valid values are cpu and memory . For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
Note
All specified subnets and security groups must be from the same VPC.
subnets (list) --
The IDs of the subnets associated with the task or service. There is a limit of 16 subnets that can be specified per AwsVpcConfiguration .
Note
All specified subnets must be from the same VPC.
(string) --
securityGroups (list) --
The IDs of the security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of 5 security groups that can be specified per AwsVpcConfiguration .
Note
All specified security groups must be from the same VPC.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED .
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
schedulingStrategy (string) --
The scheduling strategy to use for the service. For more information, see Services .
There are two service scheduler strategies available:
REPLICA -The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions.
DAEMON -The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. The service scheduler also evaluates the task placement constraints for running tasks and will stop tasks that do not meet the placement constraints.
Note
Fargate tasks do not support the DAEMON scheduling strategy.
deploymentController (dict) --
The deployment controller type the service is using. When using the DescribeServices API, this field is omitted if the service is using the ECS deployment controller type.
type (string) --
The deployment controller type to use.
There are three deployment controller types available:
ECS
The rolling update (ECS ) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration .
CODE_DEPLOY
The blue/green (CODE_DEPLOY ) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it.
EXTERNAL
The external (EXTERNAL ) deployment type enables you to use any third-party deployment controller for full control over the deployment process for an Amazon ECS service.
tags (list) --
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define.
The following basic restrictions apply to tags:
Maximum number of tags per resource - 50
For each resource, each tag key must be unique, and each tag key can have only one value.
Maximum key length - 128 Unicode characters in UTF-8
Maximum value length - 256 Unicode characters in UTF-8
If your tagging schema is used across multiple services and resources, remember that other services may have restrictions on allowed characters. Generally allowed characters are: letters, numbers, and spaces representable in UTF-8, and the following characters: + - = . _ : / @.
Tag keys and values are case-sensitive.
Do not use aws: , AWS: , or any upper or lowercase combination of such as a prefix for either keys or values as it is reserved for AWS use. You cannot edit or delete tag keys or values with this prefix. Tags with this prefix do not count against your tags per resource limit.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
createdBy (string) --
The principal that created the service.
enableECSManagedTags (boolean) --
Specifies whether to enable Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide .
propagateTags (string) --
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags are not propagated.