2018/10/04 - Amazon Simple Systems Manager (SSM) - 7 updated api methods
Changes Adds RejectedPatchesAction to baseline to enable stricted validation of the rejected Patches List ; Add InstalledRejected and InstallOverrideList to compliance reporting
{'RejectedPatchesAction': 'ALLOW_AS_DEPENDENCY | BLOCK'}
Creates a patch baseline.
Note
For information about valid key and value pairs in PatchFilters for each supported operating system type, see PatchFilter .
See also: AWS API Documentation
Request Syntax
client.create_patch_baseline(
OperatingSystem='WINDOWS'|'AMAZON_LINUX'|'AMAZON_LINUX_2'|'UBUNTU'|'REDHAT_ENTERPRISE_LINUX'|'SUSE'|'CENTOS',
Name='string',
GlobalFilters={
'PatchFilters': [
{
'Key': 'PRODUCT'|'CLASSIFICATION'|'MSRC_SEVERITY'|'PATCH_ID'|'SECTION'|'PRIORITY'|'SEVERITY',
'Values': [
'string',
]
},
]
},
ApprovalRules={
'PatchRules': [
{
'PatchFilterGroup': {
'PatchFilters': [
{
'Key': 'PRODUCT'|'CLASSIFICATION'|'MSRC_SEVERITY'|'PATCH_ID'|'SECTION'|'PRIORITY'|'SEVERITY',
'Values': [
'string',
]
},
]
},
'ComplianceLevel': 'CRITICAL'|'HIGH'|'MEDIUM'|'LOW'|'INFORMATIONAL'|'UNSPECIFIED',
'ApproveAfterDays': 123,
'EnableNonSecurity': True|False
},
]
},
ApprovedPatches=[
'string',
],
ApprovedPatchesComplianceLevel='CRITICAL'|'HIGH'|'MEDIUM'|'LOW'|'INFORMATIONAL'|'UNSPECIFIED',
ApprovedPatchesEnableNonSecurity=True|False,
RejectedPatches=[
'string',
],
RejectedPatchesAction='ALLOW_AS_DEPENDENCY'|'BLOCK',
Description='string',
Sources=[
{
'Name': 'string',
'Products': [
'string',
],
'Configuration': 'string'
},
],
ClientToken='string'
)
string
Defines the operating system the patch baseline applies to. The Default value is WINDOWS.
string
[REQUIRED]
The name of the patch baseline.
dict
A set of global filters used to exclude patches from the baseline.
PatchFilters (list) -- [REQUIRED]
The set of patch filters that make up the group.
(dict) --
Defines a patch filter.
A patch filter consists of key/value pairs, but not all keys are valid for all operating system types. For example, the key PRODUCT is valid for all supported operating system types. The key MSRC_SEVERITY , however, is valid only for Windows operating systems, and the key SECTION is valid only for Ubuntu operating systems.
Refer to the following sections for information about which keys may be used with each major operating system, and which values are valid for each key.
Windows Operating Systems
The supported keys for Windows operating systems are PRODUCT , CLASSIFICATION , and MSRC_SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Windows7
Windows8
Windows8.1
Windows8Embedded
Windows10
Windows10LTSB
WindowsServer2008
WindowsServer2008R2
WindowsServer2012
WindowsServer2012R2
WindowsServer2016
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
CriticalUpdates
DefinitionUpdates
Drivers
FeaturePacks
SecurityUpdates
ServicePacks
Tools
UpdateRollups
Updates
Upgrades
Supported key: MSRC_SEVERITY
Supported values:
Critical
Important
Moderate
Low
Unspecified
Ubuntu Operating Systems
The supported keys for Ubuntu operating systems are PRODUCT , PRIORITY , and SECTION . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Ubuntu14.04
Ubuntu16.04
* Use a wildcard character () to target all supported operating system versions.*
Supported key: PRIORITY
Supported values:
Required
Important
Standard
Optional
Extra
Supported key: SECTION
Only the length of the key value is validated. Minimum length is 1. Maximum length is 64.
Amazon Linux Operating Systems
The supported keys for Amazon Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2012.03
AmazonLinux2012.09
AmazonLinux2013.03
AmazonLinux2013.09
AmazonLinux2014.03
AmazonLinux2014.09
AmazonLinux2015.03
AmazonLinux2015.09
AmazonLinux2016.03
AmazonLinux2016.09
AmazonLinux2017.03
AmazonLinux2017.09
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Amazon Linux 2 Operating Systems
The supported keys for Amazon Linux 2 operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2
AmazonLinux2.0
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
RedHat Enterprise Linux (RHEL) Operating Systems
The supported keys for RedHat Enterprise Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
RedhatEnterpriseLinux6.5
RedhatEnterpriseLinux6.6
RedhatEnterpriseLinux6.7
RedhatEnterpriseLinux6.8
RedhatEnterpriseLinux6.9
RedhatEnterpriseLinux7.0
RedhatEnterpriseLinux7.1
RedhatEnterpriseLinux7.2
RedhatEnterpriseLinux7.3
RedhatEnterpriseLinux7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
SUSE Linux Enterprise Server (SLES) Operating Systems
The supported keys for SLES operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Suse12.0
Suse12.1
Suse12.2
Suse12.3
Suse12.4
Suse12.5
Suse12.6
Suse12.7
Suse12.8
Suse12.9
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Recommended
Optional
Feature
Document
Yast
Supported key: SEVERITY
Supported values:
Critical
Important
Moderate
Low
CentOS Operating Systems
The supported keys for CentOS operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
CentOS6.5
CentOS6.6
CentOS6.7
CentOS6.8
CentOS6.9
CentOS7.0
CentOS7.1
CentOS7.2
CentOS7.3
CentOS7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Key (string) -- [REQUIRED]
The key for the filter.
See PatchFilter for lists of valid keys for each operating system type.
Values (list) -- [REQUIRED]
The value for the filter key.
See PatchFilter for lists of valid values for each key based on operating system type.
(string) --
dict
A set of rules used to include patches in the baseline.
PatchRules (list) -- [REQUIRED]
The rules that make up the rule group.
(dict) --
Defines an approval rule for a patch baseline.
PatchFilterGroup (dict) -- [REQUIRED]
The patch filter group that defines the criteria for the rule.
PatchFilters (list) -- [REQUIRED]
The set of patch filters that make up the group.
(dict) --
Defines a patch filter.
A patch filter consists of key/value pairs, but not all keys are valid for all operating system types. For example, the key PRODUCT is valid for all supported operating system types. The key MSRC_SEVERITY , however, is valid only for Windows operating systems, and the key SECTION is valid only for Ubuntu operating systems.
Refer to the following sections for information about which keys may be used with each major operating system, and which values are valid for each key.
Windows Operating Systems
The supported keys for Windows operating systems are PRODUCT , CLASSIFICATION , and MSRC_SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Windows7
Windows8
Windows8.1
Windows8Embedded
Windows10
Windows10LTSB
WindowsServer2008
WindowsServer2008R2
WindowsServer2012
WindowsServer2012R2
WindowsServer2016
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
CriticalUpdates
DefinitionUpdates
Drivers
FeaturePacks
SecurityUpdates
ServicePacks
Tools
UpdateRollups
Updates
Upgrades
Supported key: MSRC_SEVERITY
Supported values:
Critical
Important
Moderate
Low
Unspecified
Ubuntu Operating Systems
The supported keys for Ubuntu operating systems are PRODUCT , PRIORITY , and SECTION . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Ubuntu14.04
Ubuntu16.04
* Use a wildcard character () to target all supported operating system versions.*
Supported key: PRIORITY
Supported values:
Required
Important
Standard
Optional
Extra
Supported key: SECTION
Only the length of the key value is validated. Minimum length is 1. Maximum length is 64.
Amazon Linux Operating Systems
The supported keys for Amazon Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2012.03
AmazonLinux2012.09
AmazonLinux2013.03
AmazonLinux2013.09
AmazonLinux2014.03
AmazonLinux2014.09
AmazonLinux2015.03
AmazonLinux2015.09
AmazonLinux2016.03
AmazonLinux2016.09
AmazonLinux2017.03
AmazonLinux2017.09
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Amazon Linux 2 Operating Systems
The supported keys for Amazon Linux 2 operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2
AmazonLinux2.0
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
RedHat Enterprise Linux (RHEL) Operating Systems
The supported keys for RedHat Enterprise Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
RedhatEnterpriseLinux6.5
RedhatEnterpriseLinux6.6
RedhatEnterpriseLinux6.7
RedhatEnterpriseLinux6.8
RedhatEnterpriseLinux6.9
RedhatEnterpriseLinux7.0
RedhatEnterpriseLinux7.1
RedhatEnterpriseLinux7.2
RedhatEnterpriseLinux7.3
RedhatEnterpriseLinux7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
SUSE Linux Enterprise Server (SLES) Operating Systems
The supported keys for SLES operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Suse12.0
Suse12.1
Suse12.2
Suse12.3
Suse12.4
Suse12.5
Suse12.6
Suse12.7
Suse12.8
Suse12.9
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Recommended
Optional
Feature
Document
Yast
Supported key: SEVERITY
Supported values:
Critical
Important
Moderate
Low
CentOS Operating Systems
The supported keys for CentOS operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
CentOS6.5
CentOS6.6
CentOS6.7
CentOS6.8
CentOS6.9
CentOS7.0
CentOS7.1
CentOS7.2
CentOS7.3
CentOS7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Key (string) -- [REQUIRED]
The key for the filter.
See PatchFilter for lists of valid keys for each operating system type.
Values (list) -- [REQUIRED]
The value for the filter key.
See PatchFilter for lists of valid values for each key based on operating system type.
(string) --
ComplianceLevel (string) --
A compliance severity level for all approved patches in a patch baseline. Valid compliance severity levels include the following: Unspecified, Critical, High, Medium, Low, and Informational.
ApproveAfterDays (integer) -- [REQUIRED]
The number of days after the release date of each patch matched by the rule that the patch is marked as approved in the patch baseline. For example, a value of 7 means that patches are approved seven days after they are released.
EnableNonSecurity (boolean) --
For instances identified by the approval rule filters, enables a patch baseline to apply non-security updates available in the specified repository. The default value is 'false'. Applies to Linux instances only.
list
A list of explicitly approved patches for the baseline.
For information about accepted formats for lists of approved patches and rejected patches, see Package Name Formats for Approved and Rejected Patch Lists in the AWS Systems Manager User Guide .
(string) --
string
Defines the compliance level for approved patches. This means that if an approved patch is reported as missing, this is the severity of the compliance violation. The default value is UNSPECIFIED.
boolean
Indicates whether the list of approved patches includes non-security updates that should be applied to the instances. The default value is 'false'. Applies to Linux instances only.
list
A list of explicitly rejected patches for the baseline.
For information about accepted formats for lists of approved patches and rejected patches, see Package Name Formats for Approved and Rejected Patch Lists in the AWS Systems Manager User Guide .
(string) --
string
The action for Patch Manager to take on patches included in the RejectedPackages list.
ALLOW_AS_DEPENDENCY : A package in the Rejected patches list is installed only if it is a dependency of another package. It is considered compliant with the patch baseline, and its status is reported as InstalledOther . This is the default action if no option is specified.
BLOCK : Packages in the RejectedPatches list, and packages that include them as dependencies, are not installed under any circumstances. If a package was installed before it was added to the Rejected patches list, it is considered non-compliant with the patch baseline, and its status is reported as InstalledRejected .
string
A description of the patch baseline.
list
Information about the patches to use to update the instances, including target operating systems and source repositories. Applies to Linux instances only.
(dict) --
Information about the patches to use to update the instances, including target operating systems and source repository. Applies to Linux instances only.
Name (string) -- [REQUIRED]
The name specified to identify the patch source.
Products (list) -- [REQUIRED]
The specific operating system versions a patch repository applies to, such as "Ubuntu16.04", "AmazonLinux2016.09", "RedhatEnterpriseLinux7.2" or "Suse12.7". For lists of supported product values, see PatchFilter .
(string) --
Configuration (string) -- [REQUIRED]
The value of the yum repo configuration. For example:
cachedir=/var/cache/yum/$basesearch
$releasever
keepcache=0
debuglevel=2
string
User-provided idempotency token.
This field is autopopulated if not provided.
dict
Response Syntax
{
'BaselineId': 'string'
}
Response Structure
(dict) --
BaselineId (string) --
The ID of the created patch baseline.
{'InstancePatchStates': {'InstallOverrideList': 'string',
'InstalledRejectedCount': 'integer'}}
Retrieves the high-level patch state of one or more instances.
See also: AWS API Documentation
Request Syntax
client.describe_instance_patch_states(
InstanceIds=[
'string',
],
NextToken='string',
MaxResults=123
)
list
[REQUIRED]
The ID of the instance whose patch state information should be retrieved.
(string) --
string
The token for the next set of items to return. (You received this token from a previous call.)
integer
The maximum number of instances to return (per page).
dict
Response Syntax
{
'InstancePatchStates': [
{
'InstanceId': 'string',
'PatchGroup': 'string',
'BaselineId': 'string',
'SnapshotId': 'string',
'InstallOverrideList': 'string',
'OwnerInformation': 'string',
'InstalledCount': 123,
'InstalledOtherCount': 123,
'InstalledRejectedCount': 123,
'MissingCount': 123,
'FailedCount': 123,
'NotApplicableCount': 123,
'OperationStartTime': datetime(2015, 1, 1),
'OperationEndTime': datetime(2015, 1, 1),
'Operation': 'Scan'|'Install'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
InstancePatchStates (list) --
The high-level patch state for the requested instances.
(dict) --
Defines the high-level patch compliance state for a managed instance, providing information about the number of installed, missing, not applicable, and failed patches along with metadata about the operation when this information was gathered for the instance.
InstanceId (string) --
The ID of the managed instance the high-level patch compliance information was collected for.
PatchGroup (string) --
The name of the patch group the managed instance belongs to.
BaselineId (string) --
The ID of the patch baseline used to patch the instance.
SnapshotId (string) --
The ID of the patch baseline snapshot used during the patching operation when this compliance data was collected.
InstallOverrideList (string) --
An https URL or an Amazon S3 path-style URL to a list of patches to be installed. This patch installation list, which you maintain in an Amazon S3 bucket in YAML format and specify in the SSM document AWS-RunPatchBaseline , overrides the patches specified by the default patch baseline.
For more information about the InstallOverrideList parameter, see About the SSM Document AWS-RunPatchBaseline in the AWS Systems Manager User Guide .
OwnerInformation (string) --
Placeholder information. This field will always be empty in the current release of the service.
InstalledCount (integer) --
The number of patches from the patch baseline that are installed on the instance.
InstalledOtherCount (integer) --
The number of patches not specified in the patch baseline that are installed on the instance.
InstalledRejectedCount (integer) --
The number of instances with patches installed that are specified in a RejectedPatches list. Patches with a status of InstalledRejected were typically installed before they were added to a RejectedPatches list.
Note
If ALLOW_AS_DEPENDENCY is the specified option for RejectedPatchesAction, the value of InstalledRejectedCount will always be 0 (zero).
MissingCount (integer) --
The number of patches from the patch baseline that are applicable for the instance but aren't currently installed.
FailedCount (integer) --
The number of patches from the patch baseline that were attempted to be installed during the last patching operation, but failed to install.
NotApplicableCount (integer) --
The number of patches from the patch baseline that aren't applicable for the instance and hence aren't installed on the instance.
OperationStartTime (datetime) --
The time the most recent patching operation was started on the instance.
OperationEndTime (datetime) --
The time the most recent patching operation completed on the instance.
Operation (string) --
The type of patching operation that was performed: SCAN (assess patch compliance state) or INSTALL (install missing patches).
NextToken (string) --
The token to use when requesting the next set of items. If there are no additional items to return, the string is empty.
{'InstancePatchStates': {'InstallOverrideList': 'string',
'InstalledRejectedCount': 'integer'}}
Retrieves the high-level patch state for the instances in the specified patch group.
See also: AWS API Documentation
Request Syntax
client.describe_instance_patch_states_for_patch_group(
PatchGroup='string',
Filters=[
{
'Key': 'string',
'Values': [
'string',
],
'Type': 'Equal'|'NotEqual'|'LessThan'|'GreaterThan'
},
],
NextToken='string',
MaxResults=123
)
string
[REQUIRED]
The name of the patch group for which the patch state information should be retrieved.
list
Each entry in the array is a structure containing:
Key (string between 1 and 200 characters)
Values (array containing a single string)
Type (string "Equal", "NotEqual", "LessThan", "GreaterThan")
(dict) --
Defines a filter used in DescribeInstancePatchStatesForPatchGroup used to scope down the information returned by the API.
Key (string) -- [REQUIRED]
The key for the filter. Supported values are FailedCount, InstalledCount, InstalledOtherCount, MissingCount and NotApplicableCount.
Values (list) -- [REQUIRED]
The value for the filter, must be an integer greater than or equal to 0.
(string) --
Type (string) -- [REQUIRED]
The type of comparison that should be performed for the value: Equal, NotEqual, LessThan or GreaterThan.
string
The token for the next set of items to return. (You received this token from a previous call.)
integer
The maximum number of patches to return (per page).
dict
Response Syntax
{
'InstancePatchStates': [
{
'InstanceId': 'string',
'PatchGroup': 'string',
'BaselineId': 'string',
'SnapshotId': 'string',
'InstallOverrideList': 'string',
'OwnerInformation': 'string',
'InstalledCount': 123,
'InstalledOtherCount': 123,
'InstalledRejectedCount': 123,
'MissingCount': 123,
'FailedCount': 123,
'NotApplicableCount': 123,
'OperationStartTime': datetime(2015, 1, 1),
'OperationEndTime': datetime(2015, 1, 1),
'Operation': 'Scan'|'Install'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
InstancePatchStates (list) --
The high-level patch state for the requested instances.
(dict) --
Defines the high-level patch compliance state for a managed instance, providing information about the number of installed, missing, not applicable, and failed patches along with metadata about the operation when this information was gathered for the instance.
InstanceId (string) --
The ID of the managed instance the high-level patch compliance information was collected for.
PatchGroup (string) --
The name of the patch group the managed instance belongs to.
BaselineId (string) --
The ID of the patch baseline used to patch the instance.
SnapshotId (string) --
The ID of the patch baseline snapshot used during the patching operation when this compliance data was collected.
InstallOverrideList (string) --
An https URL or an Amazon S3 path-style URL to a list of patches to be installed. This patch installation list, which you maintain in an Amazon S3 bucket in YAML format and specify in the SSM document AWS-RunPatchBaseline , overrides the patches specified by the default patch baseline.
For more information about the InstallOverrideList parameter, see About the SSM Document AWS-RunPatchBaseline in the AWS Systems Manager User Guide .
OwnerInformation (string) --
Placeholder information. This field will always be empty in the current release of the service.
InstalledCount (integer) --
The number of patches from the patch baseline that are installed on the instance.
InstalledOtherCount (integer) --
The number of patches not specified in the patch baseline that are installed on the instance.
InstalledRejectedCount (integer) --
The number of instances with patches installed that are specified in a RejectedPatches list. Patches with a status of InstalledRejected were typically installed before they were added to a RejectedPatches list.
Note
If ALLOW_AS_DEPENDENCY is the specified option for RejectedPatchesAction, the value of InstalledRejectedCount will always be 0 (zero).
MissingCount (integer) --
The number of patches from the patch baseline that are applicable for the instance but aren't currently installed.
FailedCount (integer) --
The number of patches from the patch baseline that were attempted to be installed during the last patching operation, but failed to install.
NotApplicableCount (integer) --
The number of patches from the patch baseline that aren't applicable for the instance and hence aren't installed on the instance.
OperationStartTime (datetime) --
The time the most recent patching operation was started on the instance.
OperationEndTime (datetime) --
The time the most recent patching operation completed on the instance.
Operation (string) --
The type of patching operation that was performed: SCAN (assess patch compliance state) or INSTALL (install missing patches).
NextToken (string) --
The token to use when requesting the next set of items. If there are no additional items to return, the string is empty.
{'Patches': {'State': ['INSTALLED_REJECTED']}}
Retrieves information about the patches on the specified instance and their state relative to the patch baseline being used for the instance.
See also: AWS API Documentation
Request Syntax
client.describe_instance_patches(
InstanceId='string',
Filters=[
{
'Key': 'string',
'Values': [
'string',
]
},
],
NextToken='string',
MaxResults=123
)
string
[REQUIRED]
The ID of the instance whose patch state information should be retrieved.
list
Each entry in the array is a structure containing:
Key (string, between 1 and 128 characters)
Values (array of strings, each string between 1 and 256 characters)
(dict) --
Defines a filter used in Patch Manager APIs.
Key (string) --
The key for the filter.
Values (list) --
The value for the filter.
(string) --
string
The token for the next set of items to return. (You received this token from a previous call.)
integer
The maximum number of patches to return (per page).
dict
Response Syntax
{
'Patches': [
{
'Title': 'string',
'KBId': 'string',
'Classification': 'string',
'Severity': 'string',
'State': 'INSTALLED'|'INSTALLED_OTHER'|'INSTALLED_REJECTED'|'MISSING'|'NOT_APPLICABLE'|'FAILED',
'InstalledTime': datetime(2015, 1, 1)
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Patches (list) --
Each entry in the array is a structure containing:
Title (string)
KBId (string)
Classification (string)
Severity (string)
State (string: "INSTALLED", "INSTALLED OTHER", "MISSING", "NOT APPLICABLE", "FAILED")
InstalledTime (DateTime)
InstalledBy (string)
(dict) --
Information about the state of a patch on a particular instance as it relates to the patch baseline used to patch the instance.
Title (string) --
The title of the patch.
KBId (string) --
The operating system-specific ID of the patch.
Classification (string) --
The classification of the patch (for example, SecurityUpdates, Updates, CriticalUpdates).
Severity (string) --
The severity of the patch (for example, Critical, Important, Moderate).
State (string) --
The state of the patch on the instance (INSTALLED, INSTALLED_OTHER, MISSING, NOT_APPLICABLE or FAILED).
InstalledTime (datetime) --
The date/time the patch was installed on the instance. Note that not all operating systems provide this level of information.
NextToken (string) --
The token to use when requesting the next set of items. If there are no additional items to return, the string is empty.
{'InstancesWithInstalledRejectedPatches': 'integer'}
Returns high-level aggregated patch compliance state for a patch group.
See also: AWS API Documentation
Request Syntax
client.describe_patch_group_state(
PatchGroup='string'
)
string
[REQUIRED]
The name of the patch group whose patch snapshot should be retrieved.
dict
Response Syntax
{
'Instances': 123,
'InstancesWithInstalledPatches': 123,
'InstancesWithInstalledOtherPatches': 123,
'InstancesWithInstalledRejectedPatches': 123,
'InstancesWithMissingPatches': 123,
'InstancesWithFailedPatches': 123,
'InstancesWithNotApplicablePatches': 123
}
Response Structure
(dict) --
Instances (integer) --
The number of instances in the patch group.
InstancesWithInstalledPatches (integer) --
The number of instances with installed patches.
InstancesWithInstalledOtherPatches (integer) --
The number of instances with patches installed that aren't defined in the patch baseline.
InstancesWithInstalledRejectedPatches (integer) --
The number of instances with patches installed that are specified in a RejectedPatches list. Patches with a status of InstalledRejected were typically installed before they were added to a RejectedPatches list.
Note
If ALLOW_AS_DEPENDENCY is the specified option for RejectedPatchesAction, the value of InstancesWithInstalledRejectedPatches will always be 0 (zero).
InstancesWithMissingPatches (integer) --
The number of instances with missing patches from the patch baseline.
InstancesWithFailedPatches (integer) --
The number of instances with patches from the patch baseline that failed to install.
InstancesWithNotApplicablePatches (integer) --
The number of instances with patches that aren't applicable.
{'RejectedPatchesAction': 'ALLOW_AS_DEPENDENCY | BLOCK'}
Retrieves information about a patch baseline.
See also: AWS API Documentation
Request Syntax
client.get_patch_baseline(
BaselineId='string'
)
string
[REQUIRED]
The ID of the patch baseline to retrieve.
dict
Response Syntax
{
'BaselineId': 'string',
'Name': 'string',
'OperatingSystem': 'WINDOWS'|'AMAZON_LINUX'|'AMAZON_LINUX_2'|'UBUNTU'|'REDHAT_ENTERPRISE_LINUX'|'SUSE'|'CENTOS',
'GlobalFilters': {
'PatchFilters': [
{
'Key': 'PRODUCT'|'CLASSIFICATION'|'MSRC_SEVERITY'|'PATCH_ID'|'SECTION'|'PRIORITY'|'SEVERITY',
'Values': [
'string',
]
},
]
},
'ApprovalRules': {
'PatchRules': [
{
'PatchFilterGroup': {
'PatchFilters': [
{
'Key': 'PRODUCT'|'CLASSIFICATION'|'MSRC_SEVERITY'|'PATCH_ID'|'SECTION'|'PRIORITY'|'SEVERITY',
'Values': [
'string',
]
},
]
},
'ComplianceLevel': 'CRITICAL'|'HIGH'|'MEDIUM'|'LOW'|'INFORMATIONAL'|'UNSPECIFIED',
'ApproveAfterDays': 123,
'EnableNonSecurity': True|False
},
]
},
'ApprovedPatches': [
'string',
],
'ApprovedPatchesComplianceLevel': 'CRITICAL'|'HIGH'|'MEDIUM'|'LOW'|'INFORMATIONAL'|'UNSPECIFIED',
'ApprovedPatchesEnableNonSecurity': True|False,
'RejectedPatches': [
'string',
],
'RejectedPatchesAction': 'ALLOW_AS_DEPENDENCY'|'BLOCK',
'PatchGroups': [
'string',
],
'CreatedDate': datetime(2015, 1, 1),
'ModifiedDate': datetime(2015, 1, 1),
'Description': 'string',
'Sources': [
{
'Name': 'string',
'Products': [
'string',
],
'Configuration': 'string'
},
]
}
Response Structure
(dict) --
BaselineId (string) --
The ID of the retrieved patch baseline.
Name (string) --
The name of the patch baseline.
OperatingSystem (string) --
Returns the operating system specified for the patch baseline.
GlobalFilters (dict) --
A set of global filters used to exclude patches from the baseline.
PatchFilters (list) --
The set of patch filters that make up the group.
(dict) --
Defines a patch filter.
A patch filter consists of key/value pairs, but not all keys are valid for all operating system types. For example, the key PRODUCT is valid for all supported operating system types. The key MSRC_SEVERITY , however, is valid only for Windows operating systems, and the key SECTION is valid only for Ubuntu operating systems.
Refer to the following sections for information about which keys may be used with each major operating system, and which values are valid for each key.
Windows Operating Systems
The supported keys for Windows operating systems are PRODUCT , CLASSIFICATION , and MSRC_SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Windows7
Windows8
Windows8.1
Windows8Embedded
Windows10
Windows10LTSB
WindowsServer2008
WindowsServer2008R2
WindowsServer2012
WindowsServer2012R2
WindowsServer2016
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
CriticalUpdates
DefinitionUpdates
Drivers
FeaturePacks
SecurityUpdates
ServicePacks
Tools
UpdateRollups
Updates
Upgrades
Supported key: MSRC_SEVERITY
Supported values:
Critical
Important
Moderate
Low
Unspecified
Ubuntu Operating Systems
The supported keys for Ubuntu operating systems are PRODUCT , PRIORITY , and SECTION . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Ubuntu14.04
Ubuntu16.04
* Use a wildcard character () to target all supported operating system versions.*
Supported key: PRIORITY
Supported values:
Required
Important
Standard
Optional
Extra
Supported key: SECTION
Only the length of the key value is validated. Minimum length is 1. Maximum length is 64.
Amazon Linux Operating Systems
The supported keys for Amazon Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2012.03
AmazonLinux2012.09
AmazonLinux2013.03
AmazonLinux2013.09
AmazonLinux2014.03
AmazonLinux2014.09
AmazonLinux2015.03
AmazonLinux2015.09
AmazonLinux2016.03
AmazonLinux2016.09
AmazonLinux2017.03
AmazonLinux2017.09
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Amazon Linux 2 Operating Systems
The supported keys for Amazon Linux 2 operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2
AmazonLinux2.0
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
RedHat Enterprise Linux (RHEL) Operating Systems
The supported keys for RedHat Enterprise Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
RedhatEnterpriseLinux6.5
RedhatEnterpriseLinux6.6
RedhatEnterpriseLinux6.7
RedhatEnterpriseLinux6.8
RedhatEnterpriseLinux6.9
RedhatEnterpriseLinux7.0
RedhatEnterpriseLinux7.1
RedhatEnterpriseLinux7.2
RedhatEnterpriseLinux7.3
RedhatEnterpriseLinux7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
SUSE Linux Enterprise Server (SLES) Operating Systems
The supported keys for SLES operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Suse12.0
Suse12.1
Suse12.2
Suse12.3
Suse12.4
Suse12.5
Suse12.6
Suse12.7
Suse12.8
Suse12.9
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Recommended
Optional
Feature
Document
Yast
Supported key: SEVERITY
Supported values:
Critical
Important
Moderate
Low
CentOS Operating Systems
The supported keys for CentOS operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
CentOS6.5
CentOS6.6
CentOS6.7
CentOS6.8
CentOS6.9
CentOS7.0
CentOS7.1
CentOS7.2
CentOS7.3
CentOS7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Key (string) --
The key for the filter.
See PatchFilter for lists of valid keys for each operating system type.
Values (list) --
The value for the filter key.
See PatchFilter for lists of valid values for each key based on operating system type.
(string) --
ApprovalRules (dict) --
A set of rules used to include patches in the baseline.
PatchRules (list) --
The rules that make up the rule group.
(dict) --
Defines an approval rule for a patch baseline.
PatchFilterGroup (dict) --
The patch filter group that defines the criteria for the rule.
PatchFilters (list) --
The set of patch filters that make up the group.
(dict) --
Defines a patch filter.
A patch filter consists of key/value pairs, but not all keys are valid for all operating system types. For example, the key PRODUCT is valid for all supported operating system types. The key MSRC_SEVERITY , however, is valid only for Windows operating systems, and the key SECTION is valid only for Ubuntu operating systems.
Refer to the following sections for information about which keys may be used with each major operating system, and which values are valid for each key.
Windows Operating Systems
The supported keys for Windows operating systems are PRODUCT , CLASSIFICATION , and MSRC_SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Windows7
Windows8
Windows8.1
Windows8Embedded
Windows10
Windows10LTSB
WindowsServer2008
WindowsServer2008R2
WindowsServer2012
WindowsServer2012R2
WindowsServer2016
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
CriticalUpdates
DefinitionUpdates
Drivers
FeaturePacks
SecurityUpdates
ServicePacks
Tools
UpdateRollups
Updates
Upgrades
Supported key: MSRC_SEVERITY
Supported values:
Critical
Important
Moderate
Low
Unspecified
Ubuntu Operating Systems
The supported keys for Ubuntu operating systems are PRODUCT , PRIORITY , and SECTION . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Ubuntu14.04
Ubuntu16.04
* Use a wildcard character () to target all supported operating system versions.*
Supported key: PRIORITY
Supported values:
Required
Important
Standard
Optional
Extra
Supported key: SECTION
Only the length of the key value is validated. Minimum length is 1. Maximum length is 64.
Amazon Linux Operating Systems
The supported keys for Amazon Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2012.03
AmazonLinux2012.09
AmazonLinux2013.03
AmazonLinux2013.09
AmazonLinux2014.03
AmazonLinux2014.09
AmazonLinux2015.03
AmazonLinux2015.09
AmazonLinux2016.03
AmazonLinux2016.09
AmazonLinux2017.03
AmazonLinux2017.09
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Amazon Linux 2 Operating Systems
The supported keys for Amazon Linux 2 operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2
AmazonLinux2.0
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
RedHat Enterprise Linux (RHEL) Operating Systems
The supported keys for RedHat Enterprise Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
RedhatEnterpriseLinux6.5
RedhatEnterpriseLinux6.6
RedhatEnterpriseLinux6.7
RedhatEnterpriseLinux6.8
RedhatEnterpriseLinux6.9
RedhatEnterpriseLinux7.0
RedhatEnterpriseLinux7.1
RedhatEnterpriseLinux7.2
RedhatEnterpriseLinux7.3
RedhatEnterpriseLinux7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
SUSE Linux Enterprise Server (SLES) Operating Systems
The supported keys for SLES operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Suse12.0
Suse12.1
Suse12.2
Suse12.3
Suse12.4
Suse12.5
Suse12.6
Suse12.7
Suse12.8
Suse12.9
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Recommended
Optional
Feature
Document
Yast
Supported key: SEVERITY
Supported values:
Critical
Important
Moderate
Low
CentOS Operating Systems
The supported keys for CentOS operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
CentOS6.5
CentOS6.6
CentOS6.7
CentOS6.8
CentOS6.9
CentOS7.0
CentOS7.1
CentOS7.2
CentOS7.3
CentOS7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Key (string) --
The key for the filter.
See PatchFilter for lists of valid keys for each operating system type.
Values (list) --
The value for the filter key.
See PatchFilter for lists of valid values for each key based on operating system type.
(string) --
ComplianceLevel (string) --
A compliance severity level for all approved patches in a patch baseline. Valid compliance severity levels include the following: Unspecified, Critical, High, Medium, Low, and Informational.
ApproveAfterDays (integer) --
The number of days after the release date of each patch matched by the rule that the patch is marked as approved in the patch baseline. For example, a value of 7 means that patches are approved seven days after they are released.
EnableNonSecurity (boolean) --
For instances identified by the approval rule filters, enables a patch baseline to apply non-security updates available in the specified repository. The default value is 'false'. Applies to Linux instances only.
ApprovedPatches (list) --
A list of explicitly approved patches for the baseline.
(string) --
ApprovedPatchesComplianceLevel (string) --
Returns the specified compliance severity level for approved patches in the patch baseline.
ApprovedPatchesEnableNonSecurity (boolean) --
Indicates whether the list of approved patches includes non-security updates that should be applied to the instances. The default value is 'false'. Applies to Linux instances only.
RejectedPatches (list) --
A list of explicitly rejected patches for the baseline.
(string) --
RejectedPatchesAction (string) --
The action specified to take on patches included in the RejectedPatches list. A patch can be allowed only if it is a dependency of another package, or blocked entirely along with packages that include it as a dependency.
PatchGroups (list) --
Patch groups included in the patch baseline.
(string) --
CreatedDate (datetime) --
The date the patch baseline was created.
ModifiedDate (datetime) --
The date the patch baseline was last modified.
Description (string) --
A description of the patch baseline.
Sources (list) --
Information about the patches to use to update the instances, including target operating systems and source repositories. Applies to Linux instances only.
(dict) --
Information about the patches to use to update the instances, including target operating systems and source repository. Applies to Linux instances only.
Name (string) --
The name specified to identify the patch source.
Products (list) --
The specific operating system versions a patch repository applies to, such as "Ubuntu16.04", "AmazonLinux2016.09", "RedhatEnterpriseLinux7.2" or "Suse12.7". For lists of supported product values, see PatchFilter .
(string) --
Configuration (string) --
The value of the yum repo configuration. For example:
cachedir=/var/cache/yum/$basesearch
$releasever
keepcache=0
debuglevel=2
{'RejectedPatchesAction': 'ALLOW_AS_DEPENDENCY | BLOCK'}
Modifies an existing patch baseline. Fields not specified in the request are left unchanged.
Note
For information about valid key and value pairs in PatchFilters for each supported operating system type, see PatchFilter .
See also: AWS API Documentation
Request Syntax
client.update_patch_baseline(
BaselineId='string',
Name='string',
GlobalFilters={
'PatchFilters': [
{
'Key': 'PRODUCT'|'CLASSIFICATION'|'MSRC_SEVERITY'|'PATCH_ID'|'SECTION'|'PRIORITY'|'SEVERITY',
'Values': [
'string',
]
},
]
},
ApprovalRules={
'PatchRules': [
{
'PatchFilterGroup': {
'PatchFilters': [
{
'Key': 'PRODUCT'|'CLASSIFICATION'|'MSRC_SEVERITY'|'PATCH_ID'|'SECTION'|'PRIORITY'|'SEVERITY',
'Values': [
'string',
]
},
]
},
'ComplianceLevel': 'CRITICAL'|'HIGH'|'MEDIUM'|'LOW'|'INFORMATIONAL'|'UNSPECIFIED',
'ApproveAfterDays': 123,
'EnableNonSecurity': True|False
},
]
},
ApprovedPatches=[
'string',
],
ApprovedPatchesComplianceLevel='CRITICAL'|'HIGH'|'MEDIUM'|'LOW'|'INFORMATIONAL'|'UNSPECIFIED',
ApprovedPatchesEnableNonSecurity=True|False,
RejectedPatches=[
'string',
],
RejectedPatchesAction='ALLOW_AS_DEPENDENCY'|'BLOCK',
Description='string',
Sources=[
{
'Name': 'string',
'Products': [
'string',
],
'Configuration': 'string'
},
],
Replace=True|False
)
string
[REQUIRED]
The ID of the patch baseline to update.
string
The name of the patch baseline.
dict
A set of global filters used to exclude patches from the baseline.
PatchFilters (list) -- [REQUIRED]
The set of patch filters that make up the group.
(dict) --
Defines a patch filter.
A patch filter consists of key/value pairs, but not all keys are valid for all operating system types. For example, the key PRODUCT is valid for all supported operating system types. The key MSRC_SEVERITY , however, is valid only for Windows operating systems, and the key SECTION is valid only for Ubuntu operating systems.
Refer to the following sections for information about which keys may be used with each major operating system, and which values are valid for each key.
Windows Operating Systems
The supported keys for Windows operating systems are PRODUCT , CLASSIFICATION , and MSRC_SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Windows7
Windows8
Windows8.1
Windows8Embedded
Windows10
Windows10LTSB
WindowsServer2008
WindowsServer2008R2
WindowsServer2012
WindowsServer2012R2
WindowsServer2016
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
CriticalUpdates
DefinitionUpdates
Drivers
FeaturePacks
SecurityUpdates
ServicePacks
Tools
UpdateRollups
Updates
Upgrades
Supported key: MSRC_SEVERITY
Supported values:
Critical
Important
Moderate
Low
Unspecified
Ubuntu Operating Systems
The supported keys for Ubuntu operating systems are PRODUCT , PRIORITY , and SECTION . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Ubuntu14.04
Ubuntu16.04
* Use a wildcard character () to target all supported operating system versions.*
Supported key: PRIORITY
Supported values:
Required
Important
Standard
Optional
Extra
Supported key: SECTION
Only the length of the key value is validated. Minimum length is 1. Maximum length is 64.
Amazon Linux Operating Systems
The supported keys for Amazon Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2012.03
AmazonLinux2012.09
AmazonLinux2013.03
AmazonLinux2013.09
AmazonLinux2014.03
AmazonLinux2014.09
AmazonLinux2015.03
AmazonLinux2015.09
AmazonLinux2016.03
AmazonLinux2016.09
AmazonLinux2017.03
AmazonLinux2017.09
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Amazon Linux 2 Operating Systems
The supported keys for Amazon Linux 2 operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2
AmazonLinux2.0
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
RedHat Enterprise Linux (RHEL) Operating Systems
The supported keys for RedHat Enterprise Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
RedhatEnterpriseLinux6.5
RedhatEnterpriseLinux6.6
RedhatEnterpriseLinux6.7
RedhatEnterpriseLinux6.8
RedhatEnterpriseLinux6.9
RedhatEnterpriseLinux7.0
RedhatEnterpriseLinux7.1
RedhatEnterpriseLinux7.2
RedhatEnterpriseLinux7.3
RedhatEnterpriseLinux7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
SUSE Linux Enterprise Server (SLES) Operating Systems
The supported keys for SLES operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Suse12.0
Suse12.1
Suse12.2
Suse12.3
Suse12.4
Suse12.5
Suse12.6
Suse12.7
Suse12.8
Suse12.9
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Recommended
Optional
Feature
Document
Yast
Supported key: SEVERITY
Supported values:
Critical
Important
Moderate
Low
CentOS Operating Systems
The supported keys for CentOS operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
CentOS6.5
CentOS6.6
CentOS6.7
CentOS6.8
CentOS6.9
CentOS7.0
CentOS7.1
CentOS7.2
CentOS7.3
CentOS7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Key (string) -- [REQUIRED]
The key for the filter.
See PatchFilter for lists of valid keys for each operating system type.
Values (list) -- [REQUIRED]
The value for the filter key.
See PatchFilter for lists of valid values for each key based on operating system type.
(string) --
dict
A set of rules used to include patches in the baseline.
PatchRules (list) -- [REQUIRED]
The rules that make up the rule group.
(dict) --
Defines an approval rule for a patch baseline.
PatchFilterGroup (dict) -- [REQUIRED]
The patch filter group that defines the criteria for the rule.
PatchFilters (list) -- [REQUIRED]
The set of patch filters that make up the group.
(dict) --
Defines a patch filter.
A patch filter consists of key/value pairs, but not all keys are valid for all operating system types. For example, the key PRODUCT is valid for all supported operating system types. The key MSRC_SEVERITY , however, is valid only for Windows operating systems, and the key SECTION is valid only for Ubuntu operating systems.
Refer to the following sections for information about which keys may be used with each major operating system, and which values are valid for each key.
Windows Operating Systems
The supported keys for Windows operating systems are PRODUCT , CLASSIFICATION , and MSRC_SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Windows7
Windows8
Windows8.1
Windows8Embedded
Windows10
Windows10LTSB
WindowsServer2008
WindowsServer2008R2
WindowsServer2012
WindowsServer2012R2
WindowsServer2016
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
CriticalUpdates
DefinitionUpdates
Drivers
FeaturePacks
SecurityUpdates
ServicePacks
Tools
UpdateRollups
Updates
Upgrades
Supported key: MSRC_SEVERITY
Supported values:
Critical
Important
Moderate
Low
Unspecified
Ubuntu Operating Systems
The supported keys for Ubuntu operating systems are PRODUCT , PRIORITY , and SECTION . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Ubuntu14.04
Ubuntu16.04
* Use a wildcard character () to target all supported operating system versions.*
Supported key: PRIORITY
Supported values:
Required
Important
Standard
Optional
Extra
Supported key: SECTION
Only the length of the key value is validated. Minimum length is 1. Maximum length is 64.
Amazon Linux Operating Systems
The supported keys for Amazon Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2012.03
AmazonLinux2012.09
AmazonLinux2013.03
AmazonLinux2013.09
AmazonLinux2014.03
AmazonLinux2014.09
AmazonLinux2015.03
AmazonLinux2015.09
AmazonLinux2016.03
AmazonLinux2016.09
AmazonLinux2017.03
AmazonLinux2017.09
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Amazon Linux 2 Operating Systems
The supported keys for Amazon Linux 2 operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2
AmazonLinux2.0
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
RedHat Enterprise Linux (RHEL) Operating Systems
The supported keys for RedHat Enterprise Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
RedhatEnterpriseLinux6.5
RedhatEnterpriseLinux6.6
RedhatEnterpriseLinux6.7
RedhatEnterpriseLinux6.8
RedhatEnterpriseLinux6.9
RedhatEnterpriseLinux7.0
RedhatEnterpriseLinux7.1
RedhatEnterpriseLinux7.2
RedhatEnterpriseLinux7.3
RedhatEnterpriseLinux7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
SUSE Linux Enterprise Server (SLES) Operating Systems
The supported keys for SLES operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Suse12.0
Suse12.1
Suse12.2
Suse12.3
Suse12.4
Suse12.5
Suse12.6
Suse12.7
Suse12.8
Suse12.9
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Recommended
Optional
Feature
Document
Yast
Supported key: SEVERITY
Supported values:
Critical
Important
Moderate
Low
CentOS Operating Systems
The supported keys for CentOS operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
CentOS6.5
CentOS6.6
CentOS6.7
CentOS6.8
CentOS6.9
CentOS7.0
CentOS7.1
CentOS7.2
CentOS7.3
CentOS7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Key (string) -- [REQUIRED]
The key for the filter.
See PatchFilter for lists of valid keys for each operating system type.
Values (list) -- [REQUIRED]
The value for the filter key.
See PatchFilter for lists of valid values for each key based on operating system type.
(string) --
ComplianceLevel (string) --
A compliance severity level for all approved patches in a patch baseline. Valid compliance severity levels include the following: Unspecified, Critical, High, Medium, Low, and Informational.
ApproveAfterDays (integer) -- [REQUIRED]
The number of days after the release date of each patch matched by the rule that the patch is marked as approved in the patch baseline. For example, a value of 7 means that patches are approved seven days after they are released.
EnableNonSecurity (boolean) --
For instances identified by the approval rule filters, enables a patch baseline to apply non-security updates available in the specified repository. The default value is 'false'. Applies to Linux instances only.
list
A list of explicitly approved patches for the baseline.
For information about accepted formats for lists of approved patches and rejected patches, see Package Name Formats for Approved and Rejected Patch Lists in the AWS Systems Manager User Guide .
(string) --
string
Assigns a new compliance severity level to an existing patch baseline.
boolean
Indicates whether the list of approved patches includes non-security updates that should be applied to the instances. The default value is 'false'. Applies to Linux instances only.
list
A list of explicitly rejected patches for the baseline.
For information about accepted formats for lists of approved patches and rejected patches, see Package Name Formats for Approved and Rejected Patch Lists in the AWS Systems Manager User Guide .
(string) --
string
The action for Patch Manager to take on patches included in the RejectedPackages list.
ALLOW_AS_DEPENDENCY : A package in the Rejected patches list is installed only if it is a dependency of another package. It is considered compliant with the patch baseline, and its status is reported as InstalledOther . This is the default action if no option is specified.
BLOCK : Packages in the RejectedPatches list, and packages that include them as dependencies, are not installed under any circumstances. If a package was installed before it was added to the Rejected patches list, it is considered non-compliant with the patch baseline, and its status is reported as InstalledRejected .
string
A description of the patch baseline.
list
Information about the patches to use to update the instances, including target operating systems and source repositories. Applies to Linux instances only.
(dict) --
Information about the patches to use to update the instances, including target operating systems and source repository. Applies to Linux instances only.
Name (string) -- [REQUIRED]
The name specified to identify the patch source.
Products (list) -- [REQUIRED]
The specific operating system versions a patch repository applies to, such as "Ubuntu16.04", "AmazonLinux2016.09", "RedhatEnterpriseLinux7.2" or "Suse12.7". For lists of supported product values, see PatchFilter .
(string) --
Configuration (string) -- [REQUIRED]
The value of the yum repo configuration. For example:
cachedir=/var/cache/yum/$basesearch
$releasever
keepcache=0
debuglevel=2
boolean
If True, then all fields that are required by the CreatePatchBaseline action are also required for this API request. Optional fields that are not specified are set to null.
dict
Response Syntax
{
'BaselineId': 'string',
'Name': 'string',
'OperatingSystem': 'WINDOWS'|'AMAZON_LINUX'|'AMAZON_LINUX_2'|'UBUNTU'|'REDHAT_ENTERPRISE_LINUX'|'SUSE'|'CENTOS',
'GlobalFilters': {
'PatchFilters': [
{
'Key': 'PRODUCT'|'CLASSIFICATION'|'MSRC_SEVERITY'|'PATCH_ID'|'SECTION'|'PRIORITY'|'SEVERITY',
'Values': [
'string',
]
},
]
},
'ApprovalRules': {
'PatchRules': [
{
'PatchFilterGroup': {
'PatchFilters': [
{
'Key': 'PRODUCT'|'CLASSIFICATION'|'MSRC_SEVERITY'|'PATCH_ID'|'SECTION'|'PRIORITY'|'SEVERITY',
'Values': [
'string',
]
},
]
},
'ComplianceLevel': 'CRITICAL'|'HIGH'|'MEDIUM'|'LOW'|'INFORMATIONAL'|'UNSPECIFIED',
'ApproveAfterDays': 123,
'EnableNonSecurity': True|False
},
]
},
'ApprovedPatches': [
'string',
],
'ApprovedPatchesComplianceLevel': 'CRITICAL'|'HIGH'|'MEDIUM'|'LOW'|'INFORMATIONAL'|'UNSPECIFIED',
'ApprovedPatchesEnableNonSecurity': True|False,
'RejectedPatches': [
'string',
],
'RejectedPatchesAction': 'ALLOW_AS_DEPENDENCY'|'BLOCK',
'CreatedDate': datetime(2015, 1, 1),
'ModifiedDate': datetime(2015, 1, 1),
'Description': 'string',
'Sources': [
{
'Name': 'string',
'Products': [
'string',
],
'Configuration': 'string'
},
]
}
Response Structure
(dict) --
BaselineId (string) --
The ID of the deleted patch baseline.
Name (string) --
The name of the patch baseline.
OperatingSystem (string) --
The operating system rule used by the updated patch baseline.
GlobalFilters (dict) --
A set of global filters used to exclude patches from the baseline.
PatchFilters (list) --
The set of patch filters that make up the group.
(dict) --
Defines a patch filter.
A patch filter consists of key/value pairs, but not all keys are valid for all operating system types. For example, the key PRODUCT is valid for all supported operating system types. The key MSRC_SEVERITY , however, is valid only for Windows operating systems, and the key SECTION is valid only for Ubuntu operating systems.
Refer to the following sections for information about which keys may be used with each major operating system, and which values are valid for each key.
Windows Operating Systems
The supported keys for Windows operating systems are PRODUCT , CLASSIFICATION , and MSRC_SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Windows7
Windows8
Windows8.1
Windows8Embedded
Windows10
Windows10LTSB
WindowsServer2008
WindowsServer2008R2
WindowsServer2012
WindowsServer2012R2
WindowsServer2016
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
CriticalUpdates
DefinitionUpdates
Drivers
FeaturePacks
SecurityUpdates
ServicePacks
Tools
UpdateRollups
Updates
Upgrades
Supported key: MSRC_SEVERITY
Supported values:
Critical
Important
Moderate
Low
Unspecified
Ubuntu Operating Systems
The supported keys for Ubuntu operating systems are PRODUCT , PRIORITY , and SECTION . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Ubuntu14.04
Ubuntu16.04
* Use a wildcard character () to target all supported operating system versions.*
Supported key: PRIORITY
Supported values:
Required
Important
Standard
Optional
Extra
Supported key: SECTION
Only the length of the key value is validated. Minimum length is 1. Maximum length is 64.
Amazon Linux Operating Systems
The supported keys for Amazon Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2012.03
AmazonLinux2012.09
AmazonLinux2013.03
AmazonLinux2013.09
AmazonLinux2014.03
AmazonLinux2014.09
AmazonLinux2015.03
AmazonLinux2015.09
AmazonLinux2016.03
AmazonLinux2016.09
AmazonLinux2017.03
AmazonLinux2017.09
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Amazon Linux 2 Operating Systems
The supported keys for Amazon Linux 2 operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2
AmazonLinux2.0
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
RedHat Enterprise Linux (RHEL) Operating Systems
The supported keys for RedHat Enterprise Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
RedhatEnterpriseLinux6.5
RedhatEnterpriseLinux6.6
RedhatEnterpriseLinux6.7
RedhatEnterpriseLinux6.8
RedhatEnterpriseLinux6.9
RedhatEnterpriseLinux7.0
RedhatEnterpriseLinux7.1
RedhatEnterpriseLinux7.2
RedhatEnterpriseLinux7.3
RedhatEnterpriseLinux7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
SUSE Linux Enterprise Server (SLES) Operating Systems
The supported keys for SLES operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Suse12.0
Suse12.1
Suse12.2
Suse12.3
Suse12.4
Suse12.5
Suse12.6
Suse12.7
Suse12.8
Suse12.9
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Recommended
Optional
Feature
Document
Yast
Supported key: SEVERITY
Supported values:
Critical
Important
Moderate
Low
CentOS Operating Systems
The supported keys for CentOS operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
CentOS6.5
CentOS6.6
CentOS6.7
CentOS6.8
CentOS6.9
CentOS7.0
CentOS7.1
CentOS7.2
CentOS7.3
CentOS7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Key (string) --
The key for the filter.
See PatchFilter for lists of valid keys for each operating system type.
Values (list) --
The value for the filter key.
See PatchFilter for lists of valid values for each key based on operating system type.
(string) --
ApprovalRules (dict) --
A set of rules used to include patches in the baseline.
PatchRules (list) --
The rules that make up the rule group.
(dict) --
Defines an approval rule for a patch baseline.
PatchFilterGroup (dict) --
The patch filter group that defines the criteria for the rule.
PatchFilters (list) --
The set of patch filters that make up the group.
(dict) --
Defines a patch filter.
A patch filter consists of key/value pairs, but not all keys are valid for all operating system types. For example, the key PRODUCT is valid for all supported operating system types. The key MSRC_SEVERITY , however, is valid only for Windows operating systems, and the key SECTION is valid only for Ubuntu operating systems.
Refer to the following sections for information about which keys may be used with each major operating system, and which values are valid for each key.
Windows Operating Systems
The supported keys for Windows operating systems are PRODUCT , CLASSIFICATION , and MSRC_SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Windows7
Windows8
Windows8.1
Windows8Embedded
Windows10
Windows10LTSB
WindowsServer2008
WindowsServer2008R2
WindowsServer2012
WindowsServer2012R2
WindowsServer2016
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
CriticalUpdates
DefinitionUpdates
Drivers
FeaturePacks
SecurityUpdates
ServicePacks
Tools
UpdateRollups
Updates
Upgrades
Supported key: MSRC_SEVERITY
Supported values:
Critical
Important
Moderate
Low
Unspecified
Ubuntu Operating Systems
The supported keys for Ubuntu operating systems are PRODUCT , PRIORITY , and SECTION . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Ubuntu14.04
Ubuntu16.04
* Use a wildcard character () to target all supported operating system versions.*
Supported key: PRIORITY
Supported values:
Required
Important
Standard
Optional
Extra
Supported key: SECTION
Only the length of the key value is validated. Minimum length is 1. Maximum length is 64.
Amazon Linux Operating Systems
The supported keys for Amazon Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2012.03
AmazonLinux2012.09
AmazonLinux2013.03
AmazonLinux2013.09
AmazonLinux2014.03
AmazonLinux2014.09
AmazonLinux2015.03
AmazonLinux2015.09
AmazonLinux2016.03
AmazonLinux2016.09
AmazonLinux2017.03
AmazonLinux2017.09
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Amazon Linux 2 Operating Systems
The supported keys for Amazon Linux 2 operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
AmazonLinux2
AmazonLinux2.0
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
RedHat Enterprise Linux (RHEL) Operating Systems
The supported keys for RedHat Enterprise Linux operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
RedhatEnterpriseLinux6.5
RedhatEnterpriseLinux6.6
RedhatEnterpriseLinux6.7
RedhatEnterpriseLinux6.8
RedhatEnterpriseLinux6.9
RedhatEnterpriseLinux7.0
RedhatEnterpriseLinux7.1
RedhatEnterpriseLinux7.2
RedhatEnterpriseLinux7.3
RedhatEnterpriseLinux7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
SUSE Linux Enterprise Server (SLES) Operating Systems
The supported keys for SLES operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
Suse12.0
Suse12.1
Suse12.2
Suse12.3
Suse12.4
Suse12.5
Suse12.6
Suse12.7
Suse12.8
Suse12.9
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Recommended
Optional
Feature
Document
Yast
Supported key: SEVERITY
Supported values:
Critical
Important
Moderate
Low
CentOS Operating Systems
The supported keys for CentOS operating systems are PRODUCT , CLASSIFICATION , and SEVERITY . See the following lists for valid values for each of these keys.
Supported key: PRODUCT
Supported values:
CentOS6.5
CentOS6.6
CentOS6.7
CentOS6.8
CentOS6.9
CentOS7.0
CentOS7.1
CentOS7.2
CentOS7.3
CentOS7.4
* Use a wildcard character () to target all supported operating system versions.*
Supported key: CLASSIFICATION
Supported values:
Security
Bugfix
Enhancement
Recommended
Newpackage
Supported key: SEVERITY
Supported values:
Critical
Important
Medium
Low
Key (string) --
The key for the filter.
See PatchFilter for lists of valid keys for each operating system type.
Values (list) --
The value for the filter key.
See PatchFilter for lists of valid values for each key based on operating system type.
(string) --
ComplianceLevel (string) --
A compliance severity level for all approved patches in a patch baseline. Valid compliance severity levels include the following: Unspecified, Critical, High, Medium, Low, and Informational.
ApproveAfterDays (integer) --
The number of days after the release date of each patch matched by the rule that the patch is marked as approved in the patch baseline. For example, a value of 7 means that patches are approved seven days after they are released.
EnableNonSecurity (boolean) --
For instances identified by the approval rule filters, enables a patch baseline to apply non-security updates available in the specified repository. The default value is 'false'. Applies to Linux instances only.
ApprovedPatches (list) --
A list of explicitly approved patches for the baseline.
(string) --
ApprovedPatchesComplianceLevel (string) --
The compliance severity level assigned to the patch baseline after the update completed.
ApprovedPatchesEnableNonSecurity (boolean) --
Indicates whether the list of approved patches includes non-security updates that should be applied to the instances. The default value is 'false'. Applies to Linux instances only.
RejectedPatches (list) --
A list of explicitly rejected patches for the baseline.
(string) --
RejectedPatchesAction (string) --
The action specified to take on patches included in the RejectedPatches list. A patch can be allowed only if it is a dependency of another package, or blocked entirely along with packages that include it as a dependency.
CreatedDate (datetime) --
The date when the patch baseline was created.
ModifiedDate (datetime) --
The date when the patch baseline was last modified.
Description (string) --
A description of the Patch Baseline.
Sources (list) --
Information about the patches to use to update the instances, including target operating systems and source repositories. Applies to Linux instances only.
(dict) --
Information about the patches to use to update the instances, including target operating systems and source repository. Applies to Linux instances only.
Name (string) --
The name specified to identify the patch source.
Products (list) --
The specific operating system versions a patch repository applies to, such as "Ubuntu16.04", "AmazonLinux2016.09", "RedhatEnterpriseLinux7.2" or "Suse12.7". For lists of supported product values, see PatchFilter .
(string) --
Configuration (string) --
The value of the yum repo configuration. For example:
cachedir=/var/cache/yum/$basesearch
$releasever
keepcache=0
debuglevel=2